! Started logfile: /scr/pima/bg219e_uvs/J0158+1307_S_dfm.log on Thu May 19 18:19:18 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0158+1307_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0158+1307_S_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.890873 visibilities/baseline/integration-bin.
! Found source: J0158+1307
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 3592 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0158+1307_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.027867Jy  sigma=21.918672
! Fit after  self-cal, rms=0.643518Jy  sigma=13.759612
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.652 mas, bmaj=8.717 mas, bpa=16.39 degrees
! Estimated noise=0.791424 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.276021 Jy
! Component: 100  -  total flux cleaned = 0.338039 Jy
! Total flux subtracted in 100 components = 0.338039 Jy
! Clean residual min=-0.010326 max=0.022611 Jy/beam
! Clean residual mean=-0.000004 rms=0.002970 Jy/beam
! Combined flux in latest and established models = 0.338039 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.338039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075768Jy  sigma=1.571740
! Fit after  self-cal, rms=0.075729Jy  sigma=1.571304
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0248428 Jy
! Component: 100  -  total flux cleaned = 0.0377126 Jy
! Total flux subtracted in 100 components = 0.0377126 Jy
! Clean residual min=-0.006894 max=0.010992 Jy/beam
! Clean residual mean=-0.000002 rms=0.001786 Jy/beam
! Combined flux in latest and established models = 0.375751 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.375751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066038Jy  sigma=1.344918
! Fit after  self-cal, rms=0.065889Jy  sigma=1.342425
! Inverting map 
! Added new window around map position (6, 4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00977209 Jy
! Component: 100  -  total flux cleaned = 0.0151301 Jy
! Total flux subtracted in 100 components = 0.0151301 Jy
! Clean residual min=-0.005961 max=0.006678 Jy/beam
! Clean residual mean=-0.000003 rms=0.001484 Jy/beam
! Combined flux in latest and established models = 0.390881 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 29 components and 0.390881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064146Jy  sigma=1.301348
! Fit after  self-cal, rms=0.063982Jy  sigma=1.299069
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.32 mas, bmaj=9.292 mas, bpa=16.52 degrees
! Estimated noise=0.613245 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00605021 Jy
! Component: 100  -  total flux cleaned = 0.00974636 Jy
! Component: 150  -  total flux cleaned = 0.012326 Jy
! Component: 200  -  total flux cleaned = 0.013579 Jy
! Total flux subtracted in 200 components = 0.013579 Jy
! Clean residual min=-0.004172 max=0.006152 Jy/beam
! Clean residual mean=-0.000006 rms=0.001249 Jy/beam
! Combined flux in latest and established models = 0.40446 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 52 components and 0.40446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063354Jy  sigma=1.284052
! Fit after  self-cal, rms=0.063277Jy  sigma=1.282962
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.32 x 9.292 at 16.52 degrees (North through East)
! Clean map  min=-0.0040146  max=0.357 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        1.01     
!   LA        1.02     NL        0.94     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.02     KP        1.00     
!   LA        1.01     NL        1.00     OV        1.00     PT        0.99     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.02     KP        1.01     
!   LA        1.02     NL        0.99     OV        0.99     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.98     KP        1.00     
!   LA        1.00     NL        1.00     OV        0.99     PT        1.01     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.063277Jy  sigma=1.282962
! Fit after  self-cal, rms=0.062298Jy  sigma=1.271697
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.315 mas, bmaj=9.296 mas, bpa=16.6 degrees
! Estimated noise=0.611786 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00556708 Jy
! Component: 100  -  total flux cleaned = 0.0087259 Jy
! Component: 150  -  total flux cleaned = 0.0105087 Jy
! Component: 200  -  total flux cleaned = 0.0114262 Jy
! Total flux subtracted in 200 components = 0.0114262 Jy
! Clean residual min=-0.004019 max=0.004312 Jy/beam
! Clean residual mean=-0.000005 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.415886 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 73 components and 0.415886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061788Jy  sigma=1.258725
! Fit after  self-cal, rms=0.061729Jy  sigma=1.257666
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061729Jy  sigma=1.257666
! Fit after  self-cal, rms=0.060677Jy  sigma=1.237284
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.309 mas, bmaj=9.295 mas, bpa=16.56 degrees
! Estimated noise=0.611203 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203971 Jy
! Component: 100  -  total flux cleaned = 0.00226409 Jy
! Component: 150  -  total flux cleaned = 0.00239509 Jy
! Component: 200  -  total flux cleaned = 0.00259576 Jy
! Total flux subtracted in 200 components = 0.00259576 Jy
! Clean residual min=-0.002976 max=0.003290 Jy/beam
! Clean residual mean=-0.000002 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.418482 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 100 components and 0.418482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060584Jy  sigma=1.234994
! Fit after  self-cal, rms=0.060569Jy  sigma=1.234792
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (104.5, -114).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011233 Jy
! Component: 100  -  total flux cleaned = 0.000301265 Jy
! Component: 150  -  total flux cleaned = 0.000239147 Jy
! Component: 200  -  total flux cleaned = 0.000146696 Jy
! Total flux subtracted in 200 components = 0.000146696 Jy
! Clean residual min=-0.002936 max=0.002724 Jy/beam
! Clean residual mean=-0.000001 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.418629 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 122 components and 0.418629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060384Jy  sigma=1.231389
! Fit after  self-cal, rms=0.060382Jy  sigma=1.231237
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060382Jy  sigma=1.231237
! Fit after  self-cal, rms=0.060376Jy  sigma=1.230961
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.31 mas, bmaj=9.291 mas, bpa=16.54 degrees
! Estimated noise=0.611475 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00059605 Jy
! Component: 100  -  total flux cleaned = 0.000821759 Jy
! Component: 150  -  total flux cleaned = 0.00086266 Jy
! Component: 200  -  total flux cleaned = 0.000939177 Jy
! Total flux subtracted in 200 components = 0.000939177 Jy
! Clean residual min=-0.002712 max=0.002568 Jy/beam
! Clean residual mean=-0.000001 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.419568 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 142 components and 0.419568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060315Jy  sigma=1.229778
! Fit after  self-cal, rms=0.060314Jy  sigma=1.229750
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.03928e-05 Jy
! Component: 100  -  total flux cleaned = 0.000144797 Jy
! Component: 150  -  total flux cleaned = 0.000177683 Jy
! Component: 200  -  total flux cleaned = 0.000176739 Jy
! Total flux subtracted in 200 components = 0.000176739 Jy
! Clean residual min=-0.002614 max=0.002538 Jy/beam
! Clean residual mean=-0.000001 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.419745 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 153 components and 0.419745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060279Jy  sigma=1.229041
! Fit after  self-cal, rms=0.060279Jy  sigma=1.229029
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060279Jy  sigma=1.229029
! Fit after  self-cal, rms=0.060276Jy  sigma=1.228948
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.971 mas, bmaj=11.03 mas, bpa=8.991 degrees
! Estimated noise=0.699766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000717027 Jy
! Component: 100  -  total flux cleaned = 0.000912349 Jy
! Component: 150  -  total flux cleaned = 0.000879128 Jy
! Component: 200  -  total flux cleaned = 0.000771967 Jy
! Total flux subtracted in 200 components = 0.000771967 Jy
! Clean residual min=-0.003176 max=0.003142 Jy/beam
! Clean residual mean=-0.000000 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.420517 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 176 components and 0.420517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060257Jy  sigma=1.228449
! Fit after  self-cal, rms=0.060254Jy  sigma=1.228399
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.42337e-06 Jy
! Component: 100  -  total flux cleaned = -6.39066e-05 Jy
! Component: 150  -  total flux cleaned = -0.00010605 Jy
! Component: 200  -  total flux cleaned = -0.000167152 Jy
! Total flux subtracted in 200 components = -0.000167152 Jy
! Clean residual min=-0.003087 max=0.003169 Jy/beam
! Clean residual mean=-0.000000 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.42035 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 195 components and 0.42035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060244Jy  sigma=1.228177
! Fit after  self-cal, rms=0.060243Jy  sigma=1.228161
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.31 mas, bmaj=9.288 mas, bpa=16.53 degrees
! Estimated noise=0.611634 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.31 x 9.288 at 16.53 degrees (North through East)
! Clean map  min=-0.0024567  max=0.35612 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.651 mas, bmaj=8.713 mas, bpa=16.35 degrees
! Estimated noise=0.786521 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.274212 Jy
! Component: 100  -  total flux cleaned = 0.336753 Jy
! Component: 150  -  total flux cleaned = 0.363613 Jy
! Component: 200  -  total flux cleaned = 0.378213 Jy
! Total flux subtracted in 200 components = 0.378213 Jy
! Clean residual min=-0.005598 max=0.007189 Jy/beam
! Clean residual mean=-0.000001 rms=0.001406 Jy/beam
! Combined flux in latest and established models = 0.378213 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.378213 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.31 mas, bmaj=9.288 mas, bpa=16.53 degrees
! Estimated noise=0.611634 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121971 Jy
! Component: 100  -  total flux cleaned = 0.0198428 Jy
! Component: 150  -  total flux cleaned = 0.025204 Jy
! Component: 200  -  total flux cleaned = 0.0293264 Jy
! Total flux subtracted in 200 components = 0.0293264 Jy
! Clean residual min=-0.003636 max=0.002942 Jy/beam
! Clean residual mean=-0.000004 rms=0.000895 Jy/beam
! Combined flux in latest and established models = 0.40754 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 49 components and 0.40754 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.971 mas, bmaj=11.03 mas, bpa=8.991 degrees
! Estimated noise=0.699766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00396287 Jy
! Component: 100  -  total flux cleaned = 0.0060517 Jy
! Component: 150  -  total flux cleaned = 0.00794298 Jy
! Component: 200  -  total flux cleaned = 0.00890396 Jy
! Total flux subtracted in 200 components = 0.00890396 Jy
! Clean residual min=-0.003435 max=0.003507 Jy/beam
! Clean residual mean=-0.000003 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.416444 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000816988 Jy
! Component: 100  -  total flux cleaned = 0.00145503 Jy
! Component: 150  -  total flux cleaned = 0.00189852 Jy
! Component: 200  -  total flux cleaned = 0.00232853 Jy
! Total flux subtracted in 200 components = 0.00232853 Jy
! Clean residual min=-0.003239 max=0.003150 Jy/beam
! Clean residual mean=-0.000002 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.418772 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 136 components and 0.418772 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.31 mas, bmaj=9.288 mas, bpa=16.53 degrees
! Estimated noise=0.611634 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000401986 Jy
! Component: 100  -  total flux cleaned = 0.000572948 Jy
! Component: 150  -  total flux cleaned = 0.000776569 Jy
! Component: 200  -  total flux cleaned = 0.00100504 Jy
! Total flux subtracted in 200 components = 0.00100504 Jy
! Clean residual min=-0.002764 max=0.002595 Jy/beam
! Clean residual mean=-0.000001 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.419777 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 153 components and 0.419777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060321Jy  sigma=1.229923
! Fit after  self-cal, rms=0.060314Jy  sigma=1.229759
wmodel /J0158+1307_S_map.mod
! wmodel: Unable to open new model file: /J0158+1307_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0158+1307_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.31 x 9.288 at 16.53 degrees (North through East)
! Clean map  min=-0.0026691  max=0.35625 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0158+1307_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.356251 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000671124 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.565156 0.565156 1.13031 2.26062 4.52125 9.04249 18.085 36.17 72.3399
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.356 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  530.827 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0158+1307_S_dfm.log closed on Thu May 19 18:19:20 2016