! Started logfile: /scr/pima/bg219e_uvs/J0141-0928_X_dfm.log on Thu May 19 18:19:07 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0141-0928_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0141-0928_X_uva.fits
! AN table 1: 15 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.764815 visibilities/baseline/integration-bin.
! Found source: J0141-0928
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 4956 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0141-0928_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.108744Jy  sigma=26.240958
! Fit after  self-cal, rms=0.560805Jy  sigma=13.302485
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.118 mas, bmaj=2.929 mas, bpa=5.005 degrees
! Estimated noise=0.614021 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.334805 Jy
! Component: 100  -  total flux cleaned = 0.410425 Jy
! Total flux subtracted in 100 components = 0.410425 Jy
! Clean residual min=-0.013636 max=0.036330 Jy/beam
! Clean residual mean=-0.000003 rms=0.004460 Jy/beam
! Combined flux in latest and established models = 0.410425 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.410425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095997Jy  sigma=2.204315
! Fit after  self-cal, rms=0.095946Jy  sigma=2.202987
! Inverting map 
! Added new window around map position (-1.6, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0365226 Jy
! Component: 100  -  total flux cleaned = 0.0574041 Jy
! Total flux subtracted in 100 components = 0.0574041 Jy
! Clean residual min=-0.009244 max=0.011409 Jy/beam
! Clean residual mean=-0.000003 rms=0.002507 Jy/beam
! Combined flux in latest and established models = 0.467829 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 19 components and 0.467829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074750Jy  sigma=1.676506
! Fit after  self-cal, rms=0.073755Jy  sigma=1.649331
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165439 Jy
! Component: 100  -  total flux cleaned = 0.0269917 Jy
! Total flux subtracted in 100 components = 0.0269917 Jy
! Clean residual min=-0.006591 max=0.005757 Jy/beam
! Clean residual mean=-0.000002 rms=0.001565 Jy/beam
! Combined flux in latest and established models = 0.49482 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 28 components and 0.49482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068189Jy  sigma=1.503925
! Fit after  self-cal, rms=0.067952Jy  sigma=1.497687
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.379 mas, bmaj=3.152 mas, bpa=4.76 degrees
! Estimated noise=0.437471 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117908 Jy
! Component: 100  -  total flux cleaned = 0.0187125 Jy
! Component: 150  -  total flux cleaned = 0.0233443 Jy
! Component: 200  -  total flux cleaned = 0.026647 Jy
! Total flux subtracted in 200 components = 0.026647 Jy
! Clean residual min=-0.004163 max=0.004942 Jy/beam
! Clean residual mean=0.000003 rms=0.001204 Jy/beam
! Combined flux in latest and established models = 0.521468 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 77 components and 0.521467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065827Jy  sigma=1.438024
! Fit after  self-cal, rms=0.065727Jy  sigma=1.435446
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.379 x 3.152 at 4.76 degrees (North through East)
! Clean map  min=-0.0037593  max=0.43813 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.04     KP        0.96     
!   LA        1.01     NL        1.01     OV        0.98     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        0.99     
!   LA        1.01     NL        1.02     OV        0.98     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        0.98     
!   LA        0.98     NL        1.01     OV        0.99     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        1.00     
!   LA        0.99     NL        1.01     OV        0.98     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.99     KP        0.97     
!   LA        1.00     NL        0.99     OV        0.99     PT        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        0.96     
!   LA        0.98     NL        1.01     OV        1.01     PT        0.97     
!   SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.00     KP        0.96     
!   LA        0.98     NL        1.01     OV        0.99     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.00     KP        0.97     
!   LA        1.00     NL        1.03     OV        1.00     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        0.98     
!   LA        1.00     NL        1.00     OV        0.98     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        0.97     
!   LA        1.01     NL        1.01     OV        0.99     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.99     NL        1.01     OV        0.98     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.98     KP        0.99     
!   LA        1.01     NL        1.01     OV        0.99     PT        1.00     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.065727Jy  sigma=1.435446
! Fit after  self-cal, rms=0.064724Jy  sigma=1.411138
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.382 mas, bmaj=3.161 mas, bpa=4.755 degrees
! Estimated noise=0.435429 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000557657 Jy
! Component: 100  -  total flux cleaned = -0.000655648 Jy
! Component: 150  -  total flux cleaned = -0.000690285 Jy
! Component: 200  -  total flux cleaned = -0.000778996 Jy
! Total flux subtracted in 200 components = -0.000778996 Jy
! Clean residual min=-0.003614 max=0.003970 Jy/beam
! Clean residual mean=0.000002 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 0.520688 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 95 components and 0.520688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064665Jy  sigma=1.409726
! Fit after  self-cal, rms=0.064660Jy  sigma=1.409541
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064660Jy  sigma=1.409541
! Fit after  self-cal, rms=0.064387Jy  sigma=1.395107
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.383 mas, bmaj=3.162 mas, bpa=4.802 degrees
! Estimated noise=0.435215 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187494 Jy
! Component: 100  -  total flux cleaned = 0.000139214 Jy
! Component: 150  -  total flux cleaned = 0.000138475 Jy
! Component: 200  -  total flux cleaned = 0.000136662 Jy
! Total flux subtracted in 200 components = 0.000136662 Jy
! Clean residual min=-0.003068 max=0.002907 Jy/beam
! Clean residual mean=0.000002 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.520825 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 110 components and 0.520825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064341Jy  sigma=1.393614
! Fit after  self-cal, rms=0.064337Jy  sigma=1.393485
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000135493 Jy
! Component: 100  -  total flux cleaned = 0.000240255 Jy
! Component: 150  -  total flux cleaned = 0.000218024 Jy
! Component: 200  -  total flux cleaned = 0.000199227 Jy
! Total flux subtracted in 200 components = 0.000199227 Jy
! Clean residual min=-0.003092 max=0.002873 Jy/beam
! Clean residual mean=0.000002 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.521024 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 116 components and 0.521024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064321Jy  sigma=1.393032
! Fit after  self-cal, rms=0.064320Jy  sigma=1.392985
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064320Jy  sigma=1.392985
! Fit after  self-cal, rms=0.064317Jy  sigma=1.392701
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.384 mas, bmaj=3.164 mas, bpa=4.791 degrees
! Estimated noise=0.434793 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000433962 Jy
! Component: 100  -  total flux cleaned = -0.000457407 Jy
! Component: 150  -  total flux cleaned = -0.000477358 Jy
! Component: 200  -  total flux cleaned = -0.000494716 Jy
! Total flux subtracted in 200 components = -0.000494716 Jy
! Clean residual min=-0.002997 max=0.002874 Jy/beam
! Clean residual mean=0.000003 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 0.520529 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 122 components and 0.520529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064302Jy  sigma=1.392353
! Fit after  self-cal, rms=0.064303Jy  sigma=1.392323
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.16437e-05 Jy
! Component: 100  -  total flux cleaned = 0.000103595 Jy
! Component: 150  -  total flux cleaned = 0.000103508 Jy
! Component: 200  -  total flux cleaned = 0.000117168 Jy
! Total flux subtracted in 200 components = 0.000117168 Jy
! Clean residual min=-0.003027 max=0.002852 Jy/beam
! Clean residual mean=0.000003 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.520647 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 128 components and 0.520647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064295Jy  sigma=1.392189
! Fit after  self-cal, rms=0.064295Jy  sigma=1.392177
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064295Jy  sigma=1.392177
! Fit after  self-cal, rms=0.064271Jy  sigma=1.392073
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.243 mas, bmaj=3.968 mas, bpa=-2.505 degrees
! Estimated noise=0.485149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000435359 Jy
! Component: 100  -  total flux cleaned = -0.000488441 Jy
! Component: 150  -  total flux cleaned = -0.000503566 Jy
! Component: 200  -  total flux cleaned = -0.000490703 Jy
! Total flux subtracted in 200 components = -0.000490703 Jy
! Clean residual min=-0.003182 max=0.003280 Jy/beam
! Clean residual mean=0.000004 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.520156 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 132 components and 0.520156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064274Jy  sigma=1.391900
! Fit after  self-cal, rms=0.064273Jy  sigma=1.391846
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.24689e-05 Jy
! Component: 100  -  total flux cleaned = 9.63742e-05 Jy
! Component: 150  -  total flux cleaned = 0.000129555 Jy
! Component: 200  -  total flux cleaned = 0.000150554 Jy
! Total flux subtracted in 200 components = 0.000150554 Jy
! Clean residual min=-0.003218 max=0.003281 Jy/beam
! Clean residual mean=0.000004 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.520306 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 134 components and 0.520306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064276Jy  sigma=1.391849
! Fit after  self-cal, rms=0.064276Jy  sigma=1.391832
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.385 mas, bmaj=3.165 mas, bpa=4.776 degrees
! Estimated noise=0.434407 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.385 x 3.165 at 4.776 degrees (North through East)
! Clean map  min=-0.0029661  max=0.43443 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.121 mas, bmaj=2.938 mas, bpa=5.036 degrees
! Estimated noise=0.611663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.332973 Jy
! Component: 100  -  total flux cleaned = 0.412907 Jy
! Component: 150  -  total flux cleaned = 0.449224 Jy
! Component: 200  -  total flux cleaned = 0.470265 Jy
! Total flux subtracted in 200 components = 0.470265 Jy
! Clean residual min=-0.006477 max=0.011197 Jy/beam
! Clean residual mean=-0.000000 rms=0.001876 Jy/beam
! Combined flux in latest and established models = 0.470265 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.470265 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.385 mas, bmaj=3.165 mas, bpa=4.776 degrees
! Estimated noise=0.434407 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192078 Jy
! Component: 100  -  total flux cleaned = 0.0299161 Jy
! Component: 150  -  total flux cleaned = 0.0363433 Jy
! Component: 200  -  total flux cleaned = 0.0405001 Jy
! Total flux subtracted in 200 components = 0.0405001 Jy
! Clean residual min=-0.003527 max=0.003331 Jy/beam
! Clean residual mean=0.000000 rms=0.000817 Jy/beam
! Combined flux in latest and established models = 0.510765 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 47 components and 0.510765 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.243 mas, bmaj=3.968 mas, bpa=-2.505 degrees
! Estimated noise=0.485149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00375223 Jy
! Component: 100  -  total flux cleaned = 0.00588102 Jy
! Component: 150  -  total flux cleaned = 0.00721404 Jy
! Component: 200  -  total flux cleaned = 0.00796747 Jy
! Total flux subtracted in 200 components = 0.00796747 Jy
! Clean residual min=-0.003396 max=0.003292 Jy/beam
! Clean residual mean=0.000003 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.518733 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247391 Jy
! Component: 100  -  total flux cleaned = 0.000483291 Jy
! Component: 150  -  total flux cleaned = 0.000647002 Jy
! Component: 200  -  total flux cleaned = 0.000790852 Jy
! Total flux subtracted in 200 components = 0.000790852 Jy
! Clean residual min=-0.003361 max=0.003274 Jy/beam
! Clean residual mean=0.000003 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.519524 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 83 components and 0.519524 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.385 mas, bmaj=3.165 mas, bpa=4.776 degrees
! Estimated noise=0.434407 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143618 Jy
! Component: 100  -  total flux cleaned = 0.000144245 Jy
! Component: 150  -  total flux cleaned = 0.000175071 Jy
! Component: 200  -  total flux cleaned = 0.000176119 Jy
! Total flux subtracted in 200 components = 0.000176119 Jy
! Clean residual min=-0.003189 max=0.002759 Jy/beam
! Clean residual mean=0.000003 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.5197 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 93 components and 0.5197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064299Jy  sigma=1.392117
! Fit after  self-cal, rms=0.064293Jy  sigma=1.392014
wmodel /J0141-0928_X_map.mod
! wmodel: Unable to open new model file: /J0141-0928_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0141-0928_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.385 x 3.165 at 4.776 degrees (North through East)
! Clean map  min=-0.0030767  max=0.43448 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0141-0928_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.434476 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000676857 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.467361 0.467361 0.934721 1.86944 3.73889 7.47777 14.9555 29.9111 59.8222
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.434 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  641.902 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0141-0928_X_dfm.log closed on Thu May 19 18:19:09 2016