! Started logfile: /scr/pima/bg219e_uvs/J0127+7323_X_dfm.log on Thu May 19 18:18:58 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0127+7323_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0127+7323_X_uva.fits
! AN table 1: 61 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.813752 visibilities/baseline/integration-bin.
! Found source: J0127+7323
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21444 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0127+7323_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005268Jy  sigma=23.916604
! Fit after  self-cal, rms=0.929587Jy  sigma=22.048312
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=1.773 mas, bpa=-87.21 degrees
! Estimated noise=0.550289 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0480511 Jy
! Component: 100  -  total flux cleaned = 0.0653691 Jy
! Total flux subtracted in 100 components = 0.0653691 Jy
! Clean residual min=-0.005832 max=0.009189 Jy/beam
! Clean residual mean=-0.000047 rms=0.001512 Jy/beam
! Combined flux in latest and established models = 0.065369 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.065369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066134Jy  sigma=1.496735
! Fit after  self-cal, rms=0.065294Jy  sigma=1.480018
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118176 Jy
! Component: 100  -  total flux cleaned = 0.0196041 Jy
! Total flux subtracted in 100 components = 0.0196041 Jy
! Clean residual min=-0.004902 max=0.005632 Jy/beam
! Clean residual mean=-0.000033 rms=0.001157 Jy/beam
! Combined flux in latest and established models = 0.0849731 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 35 components and 0.0849731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061781Jy  sigma=1.386641
! Fit after  self-cal, rms=0.061730Jy  sigma=1.385271
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.302 mas, bmaj=2.185 mas, bpa=-83.78 degrees
! Estimated noise=0.218214 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100235 Jy
! Component: 100  -  total flux cleaned = 0.0160804 Jy
! Component: 150  -  total flux cleaned = 0.0201627 Jy
! Component: 200  -  total flux cleaned = 0.023073 Jy
! Total flux subtracted in 200 components = 0.023073 Jy
! Clean residual min=-0.002908 max=0.005859 Jy/beam
! Clean residual mean=-0.000034 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.108046 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 71 components and 0.108046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059955Jy  sigma=1.339250
! Fit after  self-cal, rms=0.059868Jy  sigma=1.337544
! Inverting map 
! Added new window around map position (14.2, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00581515 Jy
! Component: 100  -  total flux cleaned = 0.00918698 Jy
! Component: 150  -  total flux cleaned = 0.0117026 Jy
! Component: 200  -  total flux cleaned = 0.0137668 Jy
! Total flux subtracted in 200 components = 0.0137668 Jy
! Clean residual min=-0.002036 max=0.002034 Jy/beam
! Clean residual mean=-0.000019 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.121813 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 110 components and 0.121813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059243Jy  sigma=1.321284
! Fit after  self-cal, rms=0.059171Jy  sigma=1.319441
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.302 x 2.185 at -83.78 degrees (North through East)
! Clean map  min=-0.0018225  max=0.07003 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        0.95     KP        1.00     
!   LA        0.97     NL        1.00     OV        0.98     PT        0.95     
!   SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        1.03     KP        0.99     
!   LA        0.99     NL        1.01     OV        1.02     PT        0.94     
!   SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.98     KP        0.95     
!   LA        0.96     NL        1.03     OV        1.00     PT        0.92     
!   SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.03     KP        0.98     
!   LA        0.96     NL        1.03     OV        1.00     PT        0.95     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        0.97     KP        1.01     
!   LA        0.96     NL        1.03     OV        1.00     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.05     KP        0.96     
!   LA        0.97     NL        1.04     OV        0.98     PT        0.99     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.95     HN        0.99     KP        1.01     
!   LA        0.96     NL        1.00     OV        0.98     PT        1.02     
!   SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        0.92     KP        0.99     
!   LA        0.98     NL        0.98     OV        1.01     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.93     KP        0.98     
!   LA        1.01     NL        1.01     OV        0.96     PT        0.95     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.89     KP        0.95     
!   LA        1.01     NL        1.07     OV        0.98     PT        0.97     
!   SC        0.89     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.98     HN        0.98     KP        0.97     
!   LA        1.01     NL        1.06     OV        0.98     PT        0.99     
!   SC        0.89     
! 
! 
! Fit before self-cal, rms=0.059171Jy  sigma=1.319441
! Fit after  self-cal, rms=0.057843Jy  sigma=1.316163
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.296 mas, bmaj=2.182 mas, bpa=-83.95 degrees
! Estimated noise=0.214606 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214292 Jy
! Component: 100  -  total flux cleaned = 0.00358839 Jy
! Component: 150  -  total flux cleaned = 0.0046619 Jy
! Component: 200  -  total flux cleaned = 0.00511791 Jy
! Total flux subtracted in 200 components = 0.00511791 Jy
! Clean residual min=-0.001584 max=0.001625 Jy/beam
! Clean residual mean=-0.000006 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.126931 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 129 components and 0.126931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057741Jy  sigma=1.313656
! Fit after  self-cal, rms=0.057727Jy  sigma=1.313238
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057727Jy  sigma=1.313238
! Fit after  self-cal, rms=0.058092Jy  sigma=1.311796
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.299 mas, bmaj=2.172 mas, bpa=-84.22 degrees
! Estimated noise=0.214766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00098766 Jy
! Component: 100  -  total flux cleaned = 0.00146921 Jy
! Component: 150  -  total flux cleaned = 0.00167669 Jy
! Component: 200  -  total flux cleaned = 0.00188823 Jy
! Total flux subtracted in 200 components = 0.00188823 Jy
! Clean residual min=-0.001433 max=0.001434 Jy/beam
! Clean residual mean=-0.000004 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.128819 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 143 components and 0.128819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058064Jy  sigma=1.311141
! Fit after  self-cal, rms=0.058075Jy  sigma=1.311027
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.4, -32.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133494 Jy
! Component: 100  -  total flux cleaned = 0.00189256 Jy
! Component: 150  -  total flux cleaned = 0.00209547 Jy
! Component: 200  -  total flux cleaned = 0.00223134 Jy
! Total flux subtracted in 200 components = 0.00223134 Jy
! Clean residual min=-0.001292 max=0.001224 Jy/beam
! Clean residual mean=-0.000003 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.13105 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 166 components and 0.13105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058037Jy  sigma=1.310146
! Fit after  self-cal, rms=0.058031Jy  sigma=1.310066
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058031Jy  sigma=1.310066
! Fit after  self-cal, rms=0.058098Jy  sigma=1.309619
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.299 mas, bmaj=2.167 mas, bpa=-84.21 degrees
! Estimated noise=0.214696 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000666488 Jy
! Component: 100  -  total flux cleaned = 0.000805196 Jy
! Component: 150  -  total flux cleaned = 0.000952981 Jy
! Component: 200  -  total flux cleaned = 0.00106966 Jy
! Total flux subtracted in 200 components = 0.00106966 Jy
! Clean residual min=-0.001188 max=0.001158 Jy/beam
! Clean residual mean=-0.000004 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.13212 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 176 components and 0.13212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058081Jy  sigma=1.309249
! Fit after  self-cal, rms=0.058087Jy  sigma=1.309086
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000207679 Jy
! Component: 100  -  total flux cleaned = 0.000303689 Jy
! Component: 150  -  total flux cleaned = 0.000357424 Jy
! Component: 200  -  total flux cleaned = 0.000392053 Jy
! Total flux subtracted in 200 components = 0.000392053 Jy
! Clean residual min=-0.001160 max=0.001114 Jy/beam
! Clean residual mean=-0.000003 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.132512 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 187 components and 0.132512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058075Jy  sigma=1.308848
! Fit after  self-cal, rms=0.058075Jy  sigma=1.308833
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058075Jy  sigma=1.308833
! Fit after  self-cal, rms=0.058042Jy  sigma=1.308836
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.233 mas, bmaj=3.039 mas, bpa=-83.49 degrees
! Estimated noise=0.245707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000587323 Jy
! Component: 100  -  total flux cleaned = 0.000983496 Jy
! Component: 150  -  total flux cleaned = 0.00111487 Jy
! Component: 200  -  total flux cleaned = 0.00117313 Jy
! Total flux subtracted in 200 components = 0.00117313 Jy
! Clean residual min=-0.001120 max=0.001075 Jy/beam
! Clean residual mean=-0.000006 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.133685 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 206 components and 0.133685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058037Jy  sigma=1.308706
! Fit after  self-cal, rms=0.058036Jy  sigma=1.308686
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161146 Jy
! Component: 100  -  total flux cleaned = 0.000227928 Jy
! Component: 150  -  total flux cleaned = 0.000279008 Jy
! Component: 200  -  total flux cleaned = 0.000317344 Jy
! Total flux subtracted in 200 components = 0.000317344 Jy
! Clean residual min=-0.001111 max=0.001045 Jy/beam
! Clean residual mean=-0.000006 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.134003 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 214 components and 0.134002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058034Jy  sigma=1.308632
! Fit after  self-cal, rms=0.058033Jy  sigma=1.308626
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.298 mas, bmaj=2.164 mas, bpa=-84.26 degrees
! Estimated noise=0.214596 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.298 x 2.164 at -84.26 degrees (North through East)
! Clean map  min=-0.0011228  max=0.068217 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.037 mas, bmaj=1.754 mas, bpa=-87.87 degrees
! Estimated noise=0.537466 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0468037 Jy
! Component: 100  -  total flux cleaned = 0.0652085 Jy
! Component: 150  -  total flux cleaned = 0.0770492 Jy
! Component: 200  -  total flux cleaned = 0.0850761 Jy
! Total flux subtracted in 200 components = 0.0850761 Jy
! Clean residual min=-0.005289 max=0.004633 Jy/beam
! Clean residual mean=-0.000030 rms=0.001202 Jy/beam
! Combined flux in latest and established models = 0.0850761 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.0850761 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.298 mas, bmaj=2.164 mas, bpa=-84.26 degrees
! Estimated noise=0.214596 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106214 Jy
! Component: 100  -  total flux cleaned = 0.0176317 Jy
! Component: 150  -  total flux cleaned = 0.0229784 Jy
! Component: 200  -  total flux cleaned = 0.0271666 Jy
! Total flux subtracted in 200 components = 0.0271666 Jy
! Clean residual min=-0.002248 max=0.002559 Jy/beam
! Clean residual mean=-0.000025 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.112243 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 75 components and 0.112243 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.233 mas, bmaj=3.039 mas, bpa=-83.49 degrees
! Estimated noise=0.245707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00497948 Jy
! Component: 100  -  total flux cleaned = 0.00853035 Jy
! Component: 150  -  total flux cleaned = 0.0112408 Jy
! Component: 200  -  total flux cleaned = 0.0133796 Jy
! Total flux subtracted in 200 components = 0.0133796 Jy
! Clean residual min=-0.001689 max=0.001634 Jy/beam
! Clean residual mean=-0.000020 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.125622 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170984 Jy
! Component: 100  -  total flux cleaned = 0.00308592 Jy
! Component: 150  -  total flux cleaned = 0.00419991 Jy
! Component: 200  -  total flux cleaned = 0.00510649 Jy
! Total flux subtracted in 200 components = 0.00510649 Jy
! Clean residual min=-0.001269 max=0.001123 Jy/beam
! Clean residual mean=-0.000012 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.130729 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 146 components and 0.130729 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.298 mas, bmaj=2.164 mas, bpa=-84.26 degrees
! Estimated noise=0.214596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000567758 Jy
! Component: 100  -  total flux cleaned = 0.00100937 Jy
! Component: 150  -  total flux cleaned = 0.0012612 Jy
! Component: 200  -  total flux cleaned = 0.00144353 Jy
! Total flux subtracted in 200 components = 0.00144353 Jy
! Clean residual min=-0.001165 max=0.001154 Jy/beam
! Clean residual mean=-0.000005 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.132172 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 169 components and 0.132172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058067Jy  sigma=1.309285
! Fit after  self-cal, rms=0.058054Jy  sigma=1.309039
wmodel /J0127+7323_X_map.mod
! wmodel: Unable to open new model file: /J0127+7323_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0127+7323_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.298 x 2.164 at -84.26 degrees (North through East)
! Clean map  min=-0.001119  max=0.068439 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0127+7323_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0684394 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000277954 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.2184 1.2184 2.43679 4.87359 9.74718 19.4944 38.9887 77.9774
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.068 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  246.225 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0127+7323_X_dfm.log closed on Thu May 19 18:19:02 2016