! Started logfile: /scr/pima/bg219e_uvs/J0126+7046_X_uvs.log on Thu Apr  7 08:56:26 2016
obs /scr/pima/bg219e_uvs/J0126+7046_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0126+7046_X_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.896953 visibilities/baseline/integration-bin.
! Found source: J0126+7046
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24024 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0126+7046_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.015236Jy  sigma=24.586821
! Fit after  self-cal, rms=0.849810Jy  sigma=20.427704
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9417 mas, bmaj=1.735 mas, bpa=77.42 degrees
! Estimated noise=0.626952 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105728 Jy
! Component: 100  -  total flux cleaned = 0.152296 Jy
! Total flux subtracted in 100 components = 0.152296 Jy
! Clean residual min=-0.008995 max=0.022050 Jy/beam
! Clean residual mean=-0.000043 rms=0.002836 Jy/beam
! Combined flux in latest and established models = 0.152296 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.152296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078502Jy  sigma=1.862753
! Fit after  self-cal, rms=0.077694Jy  sigma=1.846524
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0264799 Jy
! Component: 100  -  total flux cleaned = 0.0413277 Jy
! Total flux subtracted in 100 components = 0.0413277 Jy
! Clean residual min=-0.005778 max=0.009835 Jy/beam
! Clean residual mean=-0.000020 rms=0.001591 Jy/beam
! Combined flux in latest and established models = 0.193623 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.193623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063582Jy  sigma=1.483528
! Fit after  self-cal, rms=0.063302Jy  sigma=1.478016
! Inverting map 
! Added new window around map position (-0.4, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106826 Jy
! Component: 100  -  total flux cleaned = 0.0167582 Jy
! Total flux subtracted in 100 components = 0.0167582 Jy
! Clean residual min=-0.005271 max=0.009179 Jy/beam
! Clean residual mean=-0.000011 rms=0.001295 Jy/beam
! Combined flux in latest and established models = 0.210382 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 30 components and 0.210382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060474Jy  sigma=1.406846
! Fit after  self-cal, rms=0.060358Jy  sigma=1.404605
! Inverting map 
! Added new window around map position (0.2, -2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00825448 Jy
! Component: 100  -  total flux cleaned = 0.0129395 Jy
! Total flux subtracted in 100 components = 0.0129395 Jy
! Clean residual min=-0.004393 max=0.004464 Jy/beam
! Clean residual mean=-0.000007 rms=0.001074 Jy/beam
! Combined flux in latest and established models = 0.223321 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 42 components and 0.223321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058889Jy  sigma=1.366459
! Fit after  self-cal, rms=0.058774Jy  sigma=1.363864
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.168 mas, bmaj=2.032 mas, bpa=76.43 degrees
! Estimated noise=0.267507 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0061911 Jy
! Component: 100  -  total flux cleaned = 0.0101149 Jy
! Component: 150  -  total flux cleaned = 0.0127592 Jy
! Component: 200  -  total flux cleaned = 0.0146302 Jy
! Total flux subtracted in 200 components = 0.0146302 Jy
! Clean residual min=-0.001753 max=0.001932 Jy/beam
! Clean residual mean=-0.000007 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.237951 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 65 components and 0.237951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058050Jy  sigma=1.345179
! Fit after  self-cal, rms=0.058006Jy  sigma=1.344311
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.168 x 2.032 at 76.43 degrees (North through East)
! Clean map  min=-0.0016594  max=0.14753 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        0.98     
!   LA        0.98     NL        1.01     OV        0.99     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.00     KP        0.97     
!   LA        1.01     NL        1.00     OV        1.00     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.97     
!   LA        0.98     NL        0.99     OV        0.99     PT        0.97     
!   SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.04     KP        0.99     
!   LA        1.00     NL        1.01     OV        0.99     PT        0.97     
!   SC        0.97     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.01     OV        0.99     PT        0.97     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.98     KP        0.96     
!   LA        1.03     NL        1.01     OV        0.97     PT        1.04     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.99     KP        1.00     
!   LA        1.00     NL        1.01     OV        1.02     PT        0.98     
!   SC        0.99     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058006Jy  sigma=1.344311
! Fit after  self-cal, rms=0.057597Jy  sigma=1.339732
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.17 mas, bmaj=2.036 mas, bpa=76.39 degrees
! Estimated noise=0.266201 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000597034 Jy
! Component: 100  -  total flux cleaned = 0.000533567 Jy
! Component: 150  -  total flux cleaned = 0.00042949 Jy
! Component: 200  -  total flux cleaned = 0.000383806 Jy
! Total flux subtracted in 200 components = 0.000383806 Jy
! Clean residual min=-0.001549 max=0.001688 Jy/beam
! Clean residual mean=-0.000001 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.238335 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 80 components and 0.238335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057558Jy  sigma=1.338800
! Fit after  self-cal, rms=0.057551Jy  sigma=1.338680
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057551Jy  sigma=1.338680
! Fit after  self-cal, rms=0.057389Jy  sigma=1.336424
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.166 mas, bmaj=2.043 mas, bpa=76.13 degrees
! Estimated noise=0.265459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000172398 Jy
! Component: 100  -  total flux cleaned = -0.000215873 Jy
! Component: 150  -  total flux cleaned = -0.000200459 Jy
! Component: 200  -  total flux cleaned = -0.000229278 Jy
! Total flux subtracted in 200 components = -0.000229278 Jy
! Clean residual min=-0.001621 max=0.001593 Jy/beam
! Clean residual mean=-0.000001 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.238106 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 91 components and 0.238106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057376Jy  sigma=1.336129
! Fit after  self-cal, rms=0.057377Jy  sigma=1.336075
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.22562e-05 Jy
! Component: 100  -  total flux cleaned = 2.5388e-05 Jy
! Component: 150  -  total flux cleaned = 2.83012e-06 Jy
! Component: 200  -  total flux cleaned = -1.7885e-05 Jy
! Total flux subtracted in 200 components = -1.7885e-05 Jy
! Clean residual min=-0.001633 max=0.001561 Jy/beam
! Clean residual mean=-0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.238088 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 94 components and 0.238088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057371Jy  sigma=1.335948
! Fit after  self-cal, rms=0.057370Jy  sigma=1.335935
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057370Jy  sigma=1.335935
! Fit after  self-cal, rms=0.057472Jy  sigma=1.335922
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.167 mas, bmaj=2.046 mas, bpa=76.04 degrees
! Estimated noise=0.265591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000251998 Jy
! Component: 100  -  total flux cleaned = -0.000228607 Jy
! Component: 150  -  total flux cleaned = -0.000199201 Jy
! Component: 200  -  total flux cleaned = -0.000224602 Jy
! Total flux subtracted in 200 components = -0.000224602 Jy
! Clean residual min=-0.001640 max=0.001518 Jy/beam
! Clean residual mean=-0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.237863 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.237863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057467Jy  sigma=1.335820
! Fit after  self-cal, rms=0.057467Jy  sigma=1.335806
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.81593e-06 Jy
! Component: 100  -  total flux cleaned = -2.08379e-05 Jy
! Component: 150  -  total flux cleaned = -3.56839e-05 Jy
! Component: 200  -  total flux cleaned = -4.27139e-05 Jy
! Total flux subtracted in 200 components = -4.27139e-05 Jy
! Clean residual min=-0.001650 max=0.001501 Jy/beam
! Clean residual mean=-0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.23782 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 99 components and 0.23782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057465Jy  sigma=1.335757
! Fit after  self-cal, rms=0.057464Jy  sigma=1.335749
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057464Jy  sigma=1.335749
! Fit after  self-cal, rms=0.057471Jy  sigma=1.335735
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.286 mas, bmaj=3.001 mas, bpa=88.63 degrees
! Estimated noise=0.313798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000230897 Jy
! Component: 100  -  total flux cleaned = -0.000258074 Jy
! Component: 150  -  total flux cleaned = -0.000293341 Jy
! Component: 200  -  total flux cleaned = -0.00032493 Jy
! Total flux subtracted in 200 components = -0.00032493 Jy
! Clean residual min=-0.001721 max=0.001594 Jy/beam
! Clean residual mean=-0.000001 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.237496 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 104 components and 0.237496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057470Jy  sigma=1.335712
! Fit after  self-cal, rms=0.057470Jy  sigma=1.335706
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.01325e-05 Jy
! Component: 100  -  total flux cleaned = -2.98548e-05 Jy
! Component: 150  -  total flux cleaned = -3.89169e-05 Jy
! Component: 200  -  total flux cleaned = -4.73292e-05 Jy
! Total flux subtracted in 200 components = -4.73292e-05 Jy
! Clean residual min=-0.001717 max=0.001582 Jy/beam
! Clean residual mean=-0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.237448 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 105 components and 0.237448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057470Jy  sigma=1.335695
! Fit after  self-cal, rms=0.057469Jy  sigma=1.335694
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.167 mas, bmaj=2.048 mas, bpa=76.01 degrees
! Estimated noise=0.265524 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.167 x 2.048 at 76.01 degrees (North through East)
! Clean map  min=-0.0015854  max=0.14652 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9386 mas, bmaj=1.746 mas, bpa=76.96 degrees
! Estimated noise=0.623101 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106096 Jy
! Component: 100  -  total flux cleaned = 0.154854 Jy
! Component: 150  -  total flux cleaned = 0.180532 Jy
! Component: 200  -  total flux cleaned = 0.196007 Jy
! Total flux subtracted in 200 components = 0.196007 Jy
! Clean residual min=-0.005473 max=0.008537 Jy/beam
! Clean residual mean=-0.000019 rms=0.001468 Jy/beam
! Combined flux in latest and established models = 0.196007 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.196007 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.167 mas, bmaj=2.048 mas, bpa=76.01 degrees
! Estimated noise=0.265524 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154079 Jy
! Component: 100  -  total flux cleaned = 0.024396 Jy
! Component: 150  -  total flux cleaned = 0.0300566 Jy
! Component: 200  -  total flux cleaned = 0.0338867 Jy
! Total flux subtracted in 200 components = 0.0338867 Jy
! Clean residual min=-0.002063 max=0.002352 Jy/beam
! Clean residual mean=-0.000010 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.229894 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 47 components and 0.229894 Jy
! Inverting map 
! Added new window around map position (0.2, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268607 Jy
! Component: 100  -  total flux cleaned = 0.00453152 Jy
! Component: 150  -  total flux cleaned = 0.00582661 Jy
! Component: 200  -  total flux cleaned = 0.00662069 Jy
! Total flux subtracted in 200 components = 0.00662069 Jy
! Clean residual min=-0.001717 max=0.001810 Jy/beam
! Clean residual mean=-0.000002 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.236514 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 65 components and 0.236514 Jy
! Inverting map 
! Added new window around map position (4.6, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000842532 Jy
! Component: 100  -  total flux cleaned = 0.000971865 Jy
! Component: 150  -  total flux cleaned = 0.00108688 Jy
! Component: 200  -  total flux cleaned = 0.0012365 Jy
! Total flux subtracted in 200 components = 0.0012365 Jy
! Clean residual min=-0.001576 max=0.001324 Jy/beam
! Clean residual mean=-0.000002 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.237751 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.237751 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.286 mas, bmaj=3.001 mas, bpa=88.63 degrees
! Estimated noise=0.313798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000434108 Jy
! Component: 100  -  total flux cleaned = 0.000610015 Jy
! Component: 150  -  total flux cleaned = 0.000685138 Jy
! Component: 200  -  total flux cleaned = 0.00069615 Jy
! Total flux subtracted in 200 components = 0.00069615 Jy
! Clean residual min=-0.001666 max=0.001330 Jy/beam
! Clean residual mean=-0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.238447 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.82452e-05 Jy
! Component: 100  -  total flux cleaned = 9.81361e-06 Jy
! Component: 150  -  total flux cleaned = 1.7999e-05 Jy
! Component: 200  -  total flux cleaned = 2.56703e-05 Jy
! Total flux subtracted in 200 components = 2.56703e-05 Jy
! Clean residual min=-0.001646 max=0.001355 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.238473 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 120 components and 0.238473 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.167 mas, bmaj=2.048 mas, bpa=76.01 degrees
! Estimated noise=0.265524 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140614 Jy
! Component: 100  -  total flux cleaned = -0.000262703 Jy
! Component: 150  -  total flux cleaned = -0.000340102 Jy
! Component: 200  -  total flux cleaned = -0.000354177 Jy
! Total flux subtracted in 200 components = -0.000354177 Jy
! Clean residual min=-0.001492 max=0.001385 Jy/beam
! Clean residual mean=-0.000001 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.238118 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 130 components and 0.238118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057440Jy  sigma=1.334784
! Fit after  self-cal, rms=0.057433Jy  sigma=1.334645
wmodel /scr/pima/bg219e_uvs/J0126+7046_X_map.mod
! Writing 130 model components to file: /scr/pima/bg219e_uvs/J0126+7046_X_map.mod
wobs /scr/pima/bg219e_uvs/J0126+7046_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0126+7046_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J0126+7046_X_map.win
! wwins: Wrote 5 windows to /scr/pima/bg219e_uvs/J0126+7046_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00026399 Jy
! Component: 100  -  total flux cleaned = -0.000497465 Jy
! Component: 150  -  total flux cleaned = -0.000737485 Jy
! Component: 200  -  total flux cleaned = -0.00096561 Jy
! Component: 250  -  total flux cleaned = -0.00112432 Jy
! Component: 300  -  total flux cleaned = -0.00127734 Jy
! Component: 350  -  total flux cleaned = -0.00144427 Jy
! Component: 400  -  total flux cleaned = -0.0015703 Jy
! Component: 450  -  total flux cleaned = -0.00163977 Jy
! Component: 500  -  total flux cleaned = -0.00165668 Jy
! Component: 550  -  total flux cleaned = -0.0017065 Jy
! Component: 600  -  total flux cleaned = -0.00175513 Jy
! Component: 650  -  total flux cleaned = -0.00172356 Jy
! Component: 700  -  total flux cleaned = -0.00173891 Jy
! Component: 750  -  total flux cleaned = -0.00169351 Jy
! Component: 800  -  total flux cleaned = -0.00170864 Jy
! Component: 850  -  total flux cleaned = -0.00167927 Jy
! Component: 900  -  total flux cleaned = -0.00169354 Jy
! Component: 950  -  total flux cleaned = -0.00169365 Jy
! Component: 1000  -  total flux cleaned = -0.00169372 Jy
! Component: 1050  -  total flux cleaned = -0.00170765 Jy
! Component: 1100  -  total flux cleaned = -0.00174794 Jy
! Component: 1150  -  total flux cleaned = -0.00172118 Jy
! Component: 1200  -  total flux cleaned = -0.00173419 Jy
! Component: 1250  -  total flux cleaned = -0.00172136 Jy
! Component: 1300  -  total flux cleaned = -0.00174706 Jy
! Component: 1350  -  total flux cleaned = -0.00175951 Jy
! Component: 1400  -  total flux cleaned = -0.00174728 Jy
! Component: 1450  -  total flux cleaned = -0.00178382 Jy
! Component: 1500  -  total flux cleaned = -0.00182012 Jy
! Component: 1550  -  total flux cleaned = -0.00184369 Jy
! Component: 1600  -  total flux cleaned = -0.00186732 Jy
! Component: 1650  -  total flux cleaned = -0.00189064 Jy
! Component: 1700  -  total flux cleaned = -0.00189082 Jy
! Component: 1750  -  total flux cleaned = -0.00194767 Jy
! Component: 1800  -  total flux cleaned = -0.00200376 Jy
! Component: 1850  -  total flux cleaned = -0.0020037 Jy
! Component: 1900  -  total flux cleaned = -0.00201463 Jy
! Component: 1950  -  total flux cleaned = -0.00205824 Jy
! Component: 2000  -  total flux cleaned = -0.00210119 Jy
! Component: 2050  -  total flux cleaned = -0.00209043 Jy
! Component: 2100  -  total flux cleaned = -0.00211151 Jy
! Component: 2150  -  total flux cleaned = -0.00212202 Jy
! Component: 2200  -  total flux cleaned = -0.00214277 Jy
! Component: 2250  -  total flux cleaned = -0.00220469 Jy
! Component: 2300  -  total flux cleaned = -0.00223537 Jy
! Component: 2350  -  total flux cleaned = -0.00224535 Jy
! Component: 2400  -  total flux cleaned = -0.00226553 Jy
! Component: 2450  -  total flux cleaned = -0.00231521 Jy
! Component: 2500  -  total flux cleaned = -0.0023053 Jy
! Component: 2550  -  total flux cleaned = -0.0022956 Jy
! Component: 2600  -  total flux cleaned = -0.00229555 Jy
! Component: 2650  -  total flux cleaned = -0.00227638 Jy
! Component: 2700  -  total flux cleaned = -0.00228595 Jy
! Component: 2750  -  total flux cleaned = -0.00224794 Jy
! Component: 2800  -  total flux cleaned = -0.00222908 Jy
! Component: 2850  -  total flux cleaned = -0.00220093 Jy
! Component: 2900  -  total flux cleaned = -0.00220095 Jy
! Component: 2950  -  total flux cleaned = -0.00214553 Jy
! Component: 3000  -  total flux cleaned = -0.00213641 Jy
! Component: 3050  -  total flux cleaned = -0.0020999 Jy
! Component: 3100  -  total flux cleaned = -0.00208167 Jy
! Component: 3150  -  total flux cleaned = -0.00204566 Jy
! Component: 3200  -  total flux cleaned = -0.00200084 Jy
! Component: 3250  -  total flux cleaned = -0.00199188 Jy
! Component: 3300  -  total flux cleaned = -0.00193885 Jy
! Component: 3350  -  total flux cleaned = -0.00192133 Jy
! Component: 3400  -  total flux cleaned = -0.00187767 Jy
! Component: 3450  -  total flux cleaned = -0.00187771 Jy
! Component: 3500  -  total flux cleaned = -0.00185179 Jy
! Component: 3550  -  total flux cleaned = -0.00186035 Jy
! Component: 3600  -  total flux cleaned = -0.00183472 Jy
! Component: 3650  -  total flux cleaned = -0.00180078 Jy
! Component: 3700  -  total flux cleaned = -0.0018093 Jy
! Component: 3750  -  total flux cleaned = -0.001801 Jy
! Component: 3800  -  total flux cleaned = -0.00178427 Jy
! Component: 3850  -  total flux cleaned = -0.00177597 Jy
! Component: 3900  -  total flux cleaned = -0.00177603 Jy
! Component: 3950  -  total flux cleaned = -0.00179247 Jy
! Component: 4000  -  total flux cleaned = -0.00175968 Jy
! Component: 4050  -  total flux cleaned = -0.00175157 Jy
! Total flux subtracted in 4096 components = -0.00175974 Jy
! Clean residual min=-0.000504 max=0.000564 Jy/beam
! Clean residual mean=-0.000001 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.236359 Jy
keep
! Adding 241 model components to the UV plane model.
! The established model now contains 371 components and 0.236359 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0126+7046_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.167 x 2.048 at 76.01 degrees (North through East)
! Clean map  min=-0.0010189  max=0.14639 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0126+7046_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.146389 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000131696 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.269889 0.269889 0.539778 1.07956 2.15911 4.31822 8.63645 17.2729 34.5458 69.0916
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.146 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1111.57 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0126+7046_X_uvs.log closed on Thu Apr  7 08:56:30 2016