! Started logfile: /scr/pima/bg219e_uvs/J0126+7046_X_dfm.log on Thu May 19 18:18:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0126+7046_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0126+7046_X_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.896953 visibilities/baseline/integration-bin.
! Found source: J0126+7046
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24024 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0126+7046_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020413Jy  sigma=23.700502
! Fit after  self-cal, rms=0.851503Jy  sigma=19.633465
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8996 mas, bmaj=1.715 mas, bpa=76.89 degrees
! Estimated noise=0.53447 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101821 Jy
! Component: 100  -  total flux cleaned = 0.147688 Jy
! Total flux subtracted in 100 components = 0.147688 Jy
! Clean residual min=-0.008269 max=0.021720 Jy/beam
! Clean residual mean=-0.000036 rms=0.002632 Jy/beam
! Combined flux in latest and established models = 0.147688 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.147688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082301Jy  sigma=1.865781
! Fit after  self-cal, rms=0.081492Jy  sigma=1.850930
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0269054 Jy
! Component: 100  -  total flux cleaned = 0.042686 Jy
! Total flux subtracted in 100 components = 0.042686 Jy
! Clean residual min=-0.005203 max=0.010145 Jy/beam
! Clean residual mean=-0.000017 rms=0.001474 Jy/beam
! Combined flux in latest and established models = 0.190374 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.190374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066790Jy  sigma=1.483581
! Fit after  self-cal, rms=0.066496Jy  sigma=1.478705
! Inverting map 
! Added new window around map position (-0.2, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.01137 Jy
! Component: 100  -  total flux cleaned = 0.0177226 Jy
! Total flux subtracted in 100 components = 0.0177226 Jy
! Clean residual min=-0.004474 max=0.009471 Jy/beam
! Clean residual mean=-0.000009 rms=0.001189 Jy/beam
! Combined flux in latest and established models = 0.208097 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 25 components and 0.208097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063349Jy  sigma=1.401416
! Fit after  self-cal, rms=0.063228Jy  sigma=1.399340
! Inverting map 
! Added new window around map position (0.2, -2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00852582 Jy
! Component: 100  -  total flux cleaned = 0.0134509 Jy
! Total flux subtracted in 100 components = 0.0134509 Jy
! Clean residual min=-0.004102 max=0.004171 Jy/beam
! Clean residual mean=-0.000005 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.221548 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 39 components and 0.221548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061617Jy  sigma=1.359644
! Fit after  self-cal, rms=0.061497Jy  sigma=1.357187
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.16 mas, bmaj=2.016 mas, bpa=76.53 degrees
! Estimated noise=0.213315 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00667211 Jy
! Component: 100  -  total flux cleaned = 0.0108502 Jy
! Component: 150  -  total flux cleaned = 0.0136383 Jy
! Component: 200  -  total flux cleaned = 0.0155824 Jy
! Total flux subtracted in 200 components = 0.0155824 Jy
! Clean residual min=-0.001635 max=0.001808 Jy/beam
! Clean residual mean=-0.000006 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.23713 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 63 components and 0.23713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060703Jy  sigma=1.337328
! Fit after  self-cal, rms=0.060639Jy  sigma=1.336133
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.16 x 2.016 at 76.53 degrees (North through East)
! Clean map  min=-0.0014985  max=0.14601 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        0.98     
!   LA        0.98     NL        1.01     OV        0.99     PT        0.99     
!   SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.00     KP        0.97     
!   LA        1.00     NL        1.00     OV        1.00     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        0.97     
!   LA        0.98     NL        0.99     OV        0.99     PT        0.97     
!   SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.04     KP        0.99     
!   LA        1.00     NL        1.01     OV        0.99     PT        0.96     
!   SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        0.99     
!   LA        1.00     NL        1.01     OV        0.99     PT        0.97     
!   SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.97     KP        0.96     
!   LA        1.03     NL        1.00     OV        0.97     PT        1.04     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.98     KP        1.00     
!   LA        1.00     NL        1.01     OV        1.01     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.10     KP        1.00     
!   LA        0.99     NL        1.01     OV        0.98     PT        1.00     
!   SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00     KP        0.99     
!   LA        1.02     NL        1.02     OV        1.01     PT        0.99     
!   SC        0.94     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.02     KP        0.99     
!   LA        0.98     NL        1.02     OV        1.01     PT        1.00     
!   SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.04     KP        0.99     
!   LA        1.04     NL        1.02     OV        0.98     PT        0.98     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.060639Jy  sigma=1.336133
! Fit after  self-cal, rms=0.060446Jy  sigma=1.331640
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.162 mas, bmaj=2.021 mas, bpa=76.5 degrees
! Estimated noise=0.212537 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000640831 Jy
! Component: 100  -  total flux cleaned = 0.000665674 Jy
! Component: 150  -  total flux cleaned = 0.000637494 Jy
! Component: 200  -  total flux cleaned = 0.000613396 Jy
! Total flux subtracted in 200 components = 0.000613396 Jy
! Clean residual min=-0.001355 max=0.001372 Jy/beam
! Clean residual mean=-0.000000 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.237744 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 75 components and 0.237744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060405Jy  sigma=1.330714
! Fit after  self-cal, rms=0.060398Jy  sigma=1.330580
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060398Jy  sigma=1.330580
! Fit after  self-cal, rms=0.060134Jy  sigma=1.327890
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.155 mas, bmaj=2.029 mas, bpa=76.12 degrees
! Estimated noise=0.21177 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000171994 Jy
! Component: 100  -  total flux cleaned = -0.000107265 Jy
! Component: 150  -  total flux cleaned = -8.95934e-05 Jy
! Component: 200  -  total flux cleaned = -9.00959e-05 Jy
! Total flux subtracted in 200 components = -9.00959e-05 Jy
! Clean residual min=-0.001275 max=0.001194 Jy/beam
! Clean residual mean=0.000000 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.237654 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 86 components and 0.237654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060119Jy  sigma=1.327599
! Fit after  self-cal, rms=0.060120Jy  sigma=1.327543
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.68736e-05 Jy
! Component: 100  -  total flux cleaned = -1.64425e-05 Jy
! Component: 150  -  total flux cleaned = -2.96615e-05 Jy
! Component: 200  -  total flux cleaned = -4.14685e-05 Jy
! Total flux subtracted in 200 components = -4.14685e-05 Jy
! Clean residual min=-0.001282 max=0.001196 Jy/beam
! Clean residual mean=-0.000000 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.237612 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 0.237612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060113Jy  sigma=1.327410
! Fit after  self-cal, rms=0.060111Jy  sigma=1.327389
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060111Jy  sigma=1.327389
! Fit after  self-cal, rms=0.060168Jy  sigma=1.327498
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.154 mas, bmaj=2.031 mas, bpa=76.01 degrees
! Estimated noise=0.211782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.42204e-05 Jy
! Component: 100  -  total flux cleaned = -9.55265e-05 Jy
! Component: 150  -  total flux cleaned = -9.50642e-05 Jy
! Component: 200  -  total flux cleaned = -0.000116393 Jy
! Total flux subtracted in 200 components = -0.000116393 Jy
! Clean residual min=-0.001298 max=0.001172 Jy/beam
! Clean residual mean=-0.000000 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.237496 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 97 components and 0.237496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060162Jy  sigma=1.327385
! Fit after  self-cal, rms=0.060162Jy  sigma=1.327366
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.33731e-05 Jy
! Component: 100  -  total flux cleaned = -2.36936e-05 Jy
! Component: 150  -  total flux cleaned = -2.3147e-05 Jy
! Component: 200  -  total flux cleaned = -2.31172e-05 Jy
! Total flux subtracted in 200 components = -2.31172e-05 Jy
! Clean residual min=-0.001307 max=0.001170 Jy/beam
! Clean residual mean=-0.000000 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.237473 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 98 components and 0.237473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060158Jy  sigma=1.327295
! Fit after  self-cal, rms=0.060157Jy  sigma=1.327288
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060157Jy  sigma=1.327288
! Fit after  self-cal, rms=0.060196Jy  sigma=1.327279
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.284 mas, bmaj=2.995 mas, bpa=88.79 degrees
! Estimated noise=0.250514 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.41517e-05 Jy
! Component: 100  -  total flux cleaned = -0.000101061 Jy
! Component: 150  -  total flux cleaned = -0.000112154 Jy
! Component: 200  -  total flux cleaned = -0.000117388 Jy
! Total flux subtracted in 200 components = -0.000117388 Jy
! Clean residual min=-0.001239 max=0.001145 Jy/beam
! Clean residual mean=0.000000 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.237355 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 105 components and 0.237355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060196Jy  sigma=1.327254
! Fit after  self-cal, rms=0.060196Jy  sigma=1.327253
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.08331e-05 Jy
! Component: 100  -  total flux cleaned = 1.04484e-05 Jy
! Component: 150  -  total flux cleaned = 5.82409e-06 Jy
! Component: 200  -  total flux cleaned = -2.80378e-06 Jy
! Total flux subtracted in 200 components = -2.80378e-06 Jy
! Clean residual min=-0.001238 max=0.001142 Jy/beam
! Clean residual mean=0.000000 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.237352 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 106 components and 0.237352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060196Jy  sigma=1.327238
! Fit after  self-cal, rms=0.060196Jy  sigma=1.327238
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.154 mas, bmaj=2.032 mas, bpa=75.96 degrees
! Estimated noise=0.211842 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.154 x 2.032 at 75.96 degrees (North through East)
! Clean map  min=-0.0012379  max=0.14504 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.894 mas, bmaj=1.727 mas, bpa=76.33 degrees
! Estimated noise=0.531246 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102503 Jy
! Component: 100  -  total flux cleaned = 0.151118 Jy
! Component: 150  -  total flux cleaned = 0.177299 Jy
! Component: 200  -  total flux cleaned = 0.193544 Jy
! Total flux subtracted in 200 components = 0.193544 Jy
! Clean residual min=-0.005355 max=0.008876 Jy/beam
! Clean residual mean=-0.000016 rms=0.001366 Jy/beam
! Combined flux in latest and established models = 0.193544 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.193544 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.154 mas, bmaj=2.032 mas, bpa=75.96 degrees
! Estimated noise=0.211842 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166048 Jy
! Component: 100  -  total flux cleaned = 0.0262208 Jy
! Component: 150  -  total flux cleaned = 0.0321133 Jy
! Component: 200  -  total flux cleaned = 0.0360219 Jy
! Total flux subtracted in 200 components = 0.0360219 Jy
! Clean residual min=-0.001702 max=0.002541 Jy/beam
! Clean residual mean=-0.000009 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.229566 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 40 components and 0.229566 Jy
! Inverting map 
! Added new window around map position (0.2, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275283 Jy
! Component: 100  -  total flux cleaned = 0.00459663 Jy
! Component: 150  -  total flux cleaned = 0.0058721 Jy
! Component: 200  -  total flux cleaned = 0.00676879 Jy
! Total flux subtracted in 200 components = 0.00676879 Jy
! Clean residual min=-0.001287 max=0.001170 Jy/beam
! Clean residual mean=-0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.236335 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 57 components and 0.236335 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.284 mas, bmaj=2.995 mas, bpa=88.79 degrees
! Estimated noise=0.250514 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000730256 Jy
! Component: 100  -  total flux cleaned = 0.000849536 Jy
! Component: 150  -  total flux cleaned = 0.000874391 Jy
! Component: 200  -  total flux cleaned = 0.00089559 Jy
! Total flux subtracted in 200 components = 0.00089559 Jy
! Clean residual min=-0.001210 max=0.001102 Jy/beam
! Clean residual mean=-0.000000 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.23723 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.42038e-06 Jy
! Component: 100  -  total flux cleaned = -9.57726e-06 Jy
! Component: 150  -  total flux cleaned = -9.8723e-06 Jy
! Component: 200  -  total flux cleaned = -1.61346e-05 Jy
! Total flux subtracted in 200 components = -1.61346e-05 Jy
! Clean residual min=-0.001214 max=0.001113 Jy/beam
! Clean residual mean=-0.000000 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.237214 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 85 components and 0.237214 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.154 mas, bmaj=2.032 mas, bpa=75.96 degrees
! Estimated noise=0.211842 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.4634e-05 Jy
! Component: 100  -  total flux cleaned = -4.37205e-05 Jy
! Component: 150  -  total flux cleaned = -7.83131e-06 Jy
! Component: 200  -  total flux cleaned = -7.41062e-06 Jy
! Total flux subtracted in 200 components = -7.41062e-06 Jy
! Clean residual min=-0.001241 max=0.001156 Jy/beam
! Clean residual mean=-0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.237207 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 94 components and 0.237207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060198Jy  sigma=1.327267
! Fit after  self-cal, rms=0.060194Jy  sigma=1.327162
wmodel /J0126+7046_X_map.mod
! wmodel: Unable to open new model file: /J0126+7046_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0126+7046_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.154 x 2.032 at 75.96 degrees (North through East)
! Clean map  min=-0.0011858  max=0.14481 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0126+7046_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.144814 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000275937 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.571638 0.571638 1.14328 2.28655 4.57311 9.14621 18.2924 36.5848 73.1697
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.144 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  524.807 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0126+7046_X_dfm.log closed on Thu May 19 18:18:53 2016