! Started logfile: /scr/pima/bg219e_uvs/J0118-2141_X_dfm.log on Thu May 19 18:18:42 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0118-2141_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0118-2141_X_uva.fits
! AN table 1: 8 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.885417 visibilities/baseline/integration-bin.
! Found source: J0118-2141
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 3060 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0118-2141_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.382076Jy  sigma=23.228490
! Fit after  self-cal, rms=0.209462Jy  sigma=3.538194
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7646 mas, bmaj=3.782 mas, bpa=21.54 degrees
! Estimated noise=1.15364 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.629649 Jy
! Component: 100  -  total flux cleaned = 0.802191 Jy
! Total flux subtracted in 100 components = 0.802191 Jy
! Clean residual min=-0.030333 max=0.076192 Jy/beam
! Clean residual mean=-0.000211 rms=0.011636 Jy/beam
! Combined flux in latest and established models = 0.802191 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.802191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.168213Jy  sigma=2.820052
! Fit after  self-cal, rms=0.168064Jy  sigma=2.818366
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0854051 Jy
! Component: 100  -  total flux cleaned = 0.132449 Jy
! Total flux subtracted in 100 components = 0.132449 Jy
! Clean residual min=-0.016241 max=0.026302 Jy/beam
! Clean residual mean=-0.000079 rms=0.004948 Jy/beam
! Combined flux in latest and established models = 0.93464 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.93464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095071Jy  sigma=1.541136
! Fit after  self-cal, rms=0.094902Jy  sigma=1.538813
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9605 mas, bmaj=3.855 mas, bpa=19.41 degrees
! Estimated noise=0.788548 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0415399 Jy
! Component: 100  -  total flux cleaned = 0.0650993 Jy
! Component: 150  -  total flux cleaned = 0.0796231 Jy
! Component: 200  -  total flux cleaned = 0.0888527 Jy
! Total flux subtracted in 200 components = 0.0888527 Jy
! Clean residual min=-0.010134 max=0.013135 Jy/beam
! Clean residual mean=-0.000014 rms=0.002992 Jy/beam
! Combined flux in latest and established models = 1.02349 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 47 components and 1.02349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074524Jy  sigma=1.170079
! Fit after  self-cal, rms=0.074521Jy  sigma=1.169934
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9605 x 3.855 at 19.41 degrees (North through East)
! Clean map  min=-0.0097982  max=0.85485 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.07     KP        1.00     
!   LA        1.00     NL        1.01     OV        0.97     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.07     KP        0.99     
!   LA        0.99     NL        1.01     OV        0.98     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.05     KP        0.99     
!   LA        0.99     NL        0.98     OV        0.97     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.06     KP        1.01     
!   LA        0.97     NL        1.01     OV        0.98     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.06     KP        0.99     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.07     KP        0.99     
!   LA        1.00     NL        0.99     OV        0.98     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.04     KP        0.99     
!   LA        1.01     NL        1.01     OV        0.97     PT        1.02     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.06     KP        0.98     
!   LA        1.00     NL        1.00     OV        0.98     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.06     KP        0.98     
!   LA        0.99     NL        1.00     OV        0.98     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.05     KP        0.98     
!   LA        1.01     NL        0.99     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.08     KP        1.00     
!   LA        1.00     NL        1.00     OV        0.96     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.06     KP        0.99     
!   LA        0.99     NL        0.99     OV        0.99     PT        0.99     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.074521Jy  sigma=1.169934
! Fit after  self-cal, rms=0.070328Jy  sigma=1.088780
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9638 mas, bmaj=3.893 mas, bpa=19.51 degrees
! Estimated noise=0.787802 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00747148 Jy
! Component: 100  -  total flux cleaned = -0.0101528 Jy
! Component: 150  -  total flux cleaned = -0.0107849 Jy
! Component: 200  -  total flux cleaned = -0.0114319 Jy
! Total flux subtracted in 200 components = -0.0114319 Jy
! Clean residual min=-0.006617 max=0.007171 Jy/beam
! Clean residual mean=0.000003 rms=0.001852 Jy/beam
! Combined flux in latest and established models = 1.01206 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 63 components and 1.01206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069504Jy  sigma=1.075094
! Fit after  self-cal, rms=0.069520Jy  sigma=1.075054
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069520Jy  sigma=1.075054
! Fit after  self-cal, rms=0.069248Jy  sigma=1.069938
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.964 mas, bmaj=3.905 mas, bpa=19.56 degrees
! Estimated noise=0.787273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00509621 Jy
! Component: 100  -  total flux cleaned = -0.00702723 Jy
! Component: 150  -  total flux cleaned = -0.00764031 Jy
! Component: 200  -  total flux cleaned = -0.00818399 Jy
! Total flux subtracted in 200 components = -0.00818399 Jy
! Clean residual min=-0.005837 max=0.006373 Jy/beam
! Clean residual mean=0.000003 rms=0.001613 Jy/beam
! Combined flux in latest and established models = 1.00388 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 70 components and 1.00388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068822Jy  sigma=1.063570
! Fit after  self-cal, rms=0.068822Jy  sigma=1.063563
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000444521 Jy
! Component: 100  -  total flux cleaned = -0.000760275 Jy
! Component: 150  -  total flux cleaned = -0.000992147 Jy
! Component: 200  -  total flux cleaned = -0.00121546 Jy
! Total flux subtracted in 200 components = -0.00121546 Jy
! Clean residual min=-0.005784 max=0.006321 Jy/beam
! Clean residual mean=0.000002 rms=0.001608 Jy/beam
! Combined flux in latest and established models = 1.00266 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 81 components and 1.00266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068790Jy  sigma=1.062896
! Fit after  self-cal, rms=0.068790Jy  sigma=1.062887
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068790Jy  sigma=1.062887
! Fit after  self-cal, rms=0.068621Jy  sigma=1.058789
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9641 mas, bmaj=3.916 mas, bpa=19.6 degrees
! Estimated noise=0.787197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00365146 Jy
! Component: 100  -  total flux cleaned = -0.00479238 Jy
! Component: 150  -  total flux cleaned = -0.00525863 Jy
! Component: 200  -  total flux cleaned = -0.00566956 Jy
! Total flux subtracted in 200 components = -0.00566956 Jy
! Clean residual min=-0.005157 max=0.005687 Jy/beam
! Clean residual mean=0.000003 rms=0.001417 Jy/beam
! Combined flux in latest and established models = 0.996992 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 87 components and 0.996992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068397Jy  sigma=1.055458
! Fit after  self-cal, rms=0.068398Jy  sigma=1.055455
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000303575 Jy
! Component: 100  -  total flux cleaned = -0.000461698 Jy
! Component: 150  -  total flux cleaned = -0.000462799 Jy
! Component: 200  -  total flux cleaned = -0.000487342 Jy
! Total flux subtracted in 200 components = -0.000487342 Jy
! Clean residual min=-0.005106 max=0.005684 Jy/beam
! Clean residual mean=0.000002 rms=0.001413 Jy/beam
! Combined flux in latest and established models = 0.996504 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 93 components and 0.996504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068378Jy  sigma=1.055050
! Fit after  self-cal, rms=0.068377Jy  sigma=1.055046
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068377Jy  sigma=1.055046
! Fit after  self-cal, rms=0.068305Jy  sigma=1.052899
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.125 mas, bmaj=5.376 mas, bpa=7.83 degrees
! Estimated noise=0.947286 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00203193 Jy
! Component: 100  -  total flux cleaned = -0.00259316 Jy
! Component: 150  -  total flux cleaned = -0.00265782 Jy
! Component: 200  -  total flux cleaned = -0.00267704 Jy
! Total flux subtracted in 200 components = -0.00267704 Jy
! Clean residual min=-0.005346 max=0.006864 Jy/beam
! Clean residual mean=0.000005 rms=0.001637 Jy/beam
! Combined flux in latest and established models = 0.993827 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 101 components and 0.993828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068224Jy  sigma=1.052007
! Fit after  self-cal, rms=0.068224Jy  sigma=1.051890
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.54489e-06 Jy
! Component: 100  -  total flux cleaned = -6.48591e-06 Jy
! Component: 150  -  total flux cleaned = -6.16829e-06 Jy
! Component: 200  -  total flux cleaned = -5.98217e-06 Jy
! Total flux subtracted in 200 components = -5.98217e-06 Jy
! Clean residual min=-0.005368 max=0.006877 Jy/beam
! Clean residual mean=0.000005 rms=0.001633 Jy/beam
! Combined flux in latest and established models = 0.993822 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 102 components and 0.993822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068212Jy  sigma=1.051709
! Fit after  self-cal, rms=0.068212Jy  sigma=1.051705
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9638 mas, bmaj=3.923 mas, bpa=19.64 degrees
! Estimated noise=0.786966 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9638 x 3.923 at 19.64 degrees (North through East)
! Clean map  min=-0.0045735  max=0.85658 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068212Jy  sigma=1.051705
! Fit after  self-cal, rms=0.062275Jy  sigma=0.936703
! Inverting map and beam 
! Estimated beam: bmin=0.9638 mas, bmaj=3.927 mas, bpa=19.65 degrees
! Estimated noise=0.785688 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00284179 Jy
! Component: 100  -  total flux cleaned = -0.00410836 Jy
! Component: 150  -  total flux cleaned = -0.00440174 Jy
! Component: 200  -  total flux cleaned = -0.00467613 Jy
! Total flux subtracted in 200 components = -0.00467613 Jy
! Clean residual min=-0.004680 max=0.005797 Jy/beam
! Clean residual mean=0.000004 rms=0.001251 Jy/beam
! Combined flux in latest and established models = 0.989145 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 116 components and 0.989145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062134Jy  sigma=0.934364
! Fit after  self-cal, rms=0.062130Jy  sigma=0.934354
! Inverting map 
! Added new window around map position (22.4, 50.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00414087 Jy
! Component: 100  -  total flux cleaned = 0.00557055 Jy
! Component: 150  -  total flux cleaned = 0.00640784 Jy
! Component: 200  -  total flux cleaned = 0.00710389 Jy
! Total flux subtracted in 200 components = 0.00710389 Jy
! Clean residual min=-0.004050 max=0.003616 Jy/beam
! Clean residual mean=0.000002 rms=0.001017 Jy/beam
! Combined flux in latest and established models = 0.996249 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 137 components and 0.996249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061556Jy  sigma=0.924977
! Fit after  self-cal, rms=0.061536Jy  sigma=0.924602
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061536Jy  sigma=0.924602
! Fit after  self-cal, rms=0.061423Jy  sigma=0.923054
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7617 mas, bmaj=3.865 mas, bpa=21.75 degrees
! Estimated noise=1.15411 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.629867 Jy
! Component: 100  -  total flux cleaned = 0.805552 Jy
! Component: 150  -  total flux cleaned = 0.888421 Jy
! Component: 200  -  total flux cleaned = 0.932028 Jy
! Total flux subtracted in 200 components = 0.932028 Jy
! Clean residual min=-0.012250 max=0.021011 Jy/beam
! Clean residual mean=-0.000051 rms=0.003550 Jy/beam
! Combined flux in latest and established models = 0.932028 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.932028 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9631 mas, bmaj=3.931 mas, bpa=19.68 degrees
! Estimated noise=0.784542 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0297831 Jy
! Component: 100  -  total flux cleaned = 0.0434651 Jy
! Component: 150  -  total flux cleaned = 0.051245 Jy
! Component: 200  -  total flux cleaned = 0.0565608 Jy
! Total flux subtracted in 200 components = 0.0565608 Jy
! Clean residual min=-0.004465 max=0.005061 Jy/beam
! Clean residual mean=-0.000007 rms=0.001229 Jy/beam
! Combined flux in latest and established models = 0.988588 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 29 components and 0.988588 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.128 mas, bmaj=5.38 mas, bpa=7.866 degrees
! Estimated noise=0.944125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00367802 Jy
! Component: 100  -  total flux cleaned = 0.00547174 Jy
! Component: 150  -  total flux cleaned = 0.00691722 Jy
! Component: 200  -  total flux cleaned = 0.00802504 Jy
! Total flux subtracted in 200 components = 0.00802504 Jy
! Clean residual min=-0.004087 max=0.003590 Jy/beam
! Clean residual mean=0.000000 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.996613 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000586442 Jy
! Component: 100  -  total flux cleaned = 0.00110102 Jy
! Component: 150  -  total flux cleaned = 0.00127278 Jy
! Component: 200  -  total flux cleaned = 0.00148356 Jy
! Total flux subtracted in 200 components = 0.00148356 Jy
! Clean residual min=-0.003967 max=0.003337 Jy/beam
! Clean residual mean=0.000002 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 0.998097 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 69 components and 0.998097 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9631 mas, bmaj=3.931 mas, bpa=19.68 degrees
! Estimated noise=0.784542 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000314262 Jy
! Component: 100  -  total flux cleaned = 0.000604256 Jy
! Component: 150  -  total flux cleaned = 0.000798411 Jy
! Component: 200  -  total flux cleaned = 0.000920338 Jy
! Total flux subtracted in 200 components = 0.000920338 Jy
! Clean residual min=-0.003670 max=0.004163 Jy/beam
! Clean residual mean=0.000004 rms=0.000936 Jy/beam
! Combined flux in latest and established models = 0.999017 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 89 components and 0.999017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061450Jy  sigma=0.923136
! Fit after  self-cal, rms=0.061414Jy  sigma=0.922548
wmodel /J0118-2141_X_map.mod
! wmodel: Unable to open new model file: /J0118-2141_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0118-2141_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9631 x 3.931 at 19.68 degrees (North through East)
! Clean map  min=-0.004025  max=0.85353 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0118-2141_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.853532 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000920981 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.323707 0.323707 0.647414 1.29483 2.58966 5.17931 10.3586 20.7173 41.4345 82.869
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0027 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.853 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  926.763 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0118-2141_X_dfm.log closed on Thu May 19 18:18:45 2016