! Started logfile: /scr/pima/bg219e_uvs/J0106-0155_X_dfm.log on Thu May 19 18:18:26 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0106-0155_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0106-0155_X_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.894841 visibilities/baseline/integration-bin.
! Found source: J0106-0155
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16236 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0106-0155_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014638Jy  sigma=24.230967
! Fit after  self-cal, rms=0.860995Jy  sigma=20.527421
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8842 mas, bmaj=2.556 mas, bpa=19.94 degrees
! Estimated noise=0.411283 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0994798 Jy
! Component: 100  -  total flux cleaned = 0.129259 Jy
! Total flux subtracted in 100 components = 0.129259 Jy
! Clean residual min=-0.010157 max=0.023120 Jy/beam
! Clean residual mean=0.000056 rms=0.002833 Jy/beam
! Combined flux in latest and established models = 0.129259 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.129259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081665Jy  sigma=1.919544
! Fit after  self-cal, rms=0.081562Jy  sigma=1.916938
! Inverting map 
! Added new window around map position (2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0220939 Jy
! Component: 100  -  total flux cleaned = 0.0361817 Jy
! Total flux subtracted in 100 components = 0.0361817 Jy
! Clean residual min=-0.007519 max=0.015962 Jy/beam
! Clean residual mean=0.000044 rms=0.002111 Jy/beam
! Combined flux in latest and established models = 0.165441 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 26 components and 0.165441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071652Jy  sigma=1.666662
! Fit after  self-cal, rms=0.071383Jy  sigma=1.659606
! Inverting map 
! Added new window around map position (3.8, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015618 Jy
! Component: 100  -  total flux cleaned = 0.0257363 Jy
! Total flux subtracted in 100 components = 0.0257363 Jy
! Clean residual min=-0.006193 max=0.007396 Jy/beam
! Clean residual mean=0.000036 rms=0.001568 Jy/beam
! Combined flux in latest and established models = 0.191177 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 40 components and 0.191177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065923Jy  sigma=1.521323
! Fit after  self-cal, rms=0.065560Jy  sigma=1.512310
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=2.759 mas, bpa=17.17 degrees
! Estimated noise=0.243688 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015049 Jy
! Component: 100  -  total flux cleaned = 0.0252155 Jy
! Component: 150  -  total flux cleaned = 0.0323157 Jy
! Component: 200  -  total flux cleaned = 0.0374633 Jy
! Total flux subtracted in 200 components = 0.0374633 Jy
! Clean residual min=-0.004945 max=0.005846 Jy/beam
! Clean residual mean=0.000027 rms=0.001411 Jy/beam
! Combined flux in latest and established models = 0.228641 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 72 components and 0.228641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061377Jy  sigma=1.404838
! Fit after  self-cal, rms=0.061067Jy  sigma=1.396575
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.106 x 2.759 at 17.17 degrees (North through East)
! Clean map  min=-0.0044735  max=0.13646 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.04     KP        0.98     
!   LA        0.97     NL        1.04     OV        0.99     PT        0.95     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.05     KP        1.00     
!   LA        0.96     NL        1.06     OV        0.98     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.98     KP        1.01     
!   LA        0.96     NL        1.01     OV        0.97     PT        0.95     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.03     KP        1.02     
!   LA        0.95     NL        1.02     OV        0.98     PT        0.94     
!   SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        1.01     
!   LA        0.96     NL        1.06     OV        0.97     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.00     KP        1.00     
!   LA        0.96     NL        1.05     OV        1.01     PT        0.97     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.95     KP        0.99     
!   LA        0.98     NL        1.08     OV        1.01     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.00     KP        1.01     
!   LA        0.99     NL        1.04     OV        0.97     PT        0.94     
!   SC        1.06     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        1.01     
!   LA        0.95     NL        1.00     OV        1.02     PT        0.93     
!   SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.02     KP        0.98     
!   LA        0.97     NL        1.04     OV        1.00     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.01     KP        1.01     
!   LA        0.98     NL        1.03     OV        0.99     PT        0.96     
!   SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.97     KP        0.98     
!   LA        0.97     NL        1.05     OV        1.00     PT        0.97     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.061067Jy  sigma=1.396575
! Fit after  self-cal, rms=0.059705Jy  sigma=1.384607
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.111 mas, bmaj=2.778 mas, bpa=17.18 degrees
! Estimated noise=0.239326 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407598 Jy
! Component: 100  -  total flux cleaned = 0.00516742 Jy
! Component: 150  -  total flux cleaned = 0.0055628 Jy
! Component: 200  -  total flux cleaned = 0.00587049 Jy
! Total flux subtracted in 200 components = 0.00587049 Jy
! Clean residual min=-0.003321 max=0.005728 Jy/beam
! Clean residual mean=0.000017 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.234511 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 95 components and 0.234511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059422Jy  sigma=1.376568
! Fit after  self-cal, rms=0.059377Jy  sigma=1.375131
! Inverting map 
! Added new window around map position (10.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00616544 Jy
! Component: 100  -  total flux cleaned = 0.00966125 Jy
! Component: 150  -  total flux cleaned = 0.0120363 Jy
! Component: 200  -  total flux cleaned = 0.0139057 Jy
! Total flux subtracted in 200 components = 0.0139057 Jy
! Clean residual min=-0.002688 max=0.003734 Jy/beam
! Clean residual mean=0.000012 rms=0.000801 Jy/beam
! Combined flux in latest and established models = 0.248417 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 131 components and 0.248417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058726Jy  sigma=1.357007
! Fit after  self-cal, rms=0.058665Jy  sigma=1.355449
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058665Jy  sigma=1.355449
! Fit after  self-cal, rms=0.058355Jy  sigma=1.350670
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.112 mas, bmaj=2.777 mas, bpa=17.15 degrees
! Estimated noise=0.238237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228094 Jy
! Component: 100  -  total flux cleaned = 0.00395995 Jy
! Component: 150  -  total flux cleaned = 0.00497253 Jy
! Component: 200  -  total flux cleaned = 0.00570778 Jy
! Total flux subtracted in 200 components = 0.00570778 Jy
! Clean residual min=-0.002242 max=0.003111 Jy/beam
! Clean residual mean=0.000009 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.254125 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 148 components and 0.254125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058232Jy  sigma=1.347148
! Fit after  self-cal, rms=0.058228Jy  sigma=1.346786
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7.4, 12.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00276286 Jy
! Component: 100  -  total flux cleaned = 0.00448999 Jy
! Component: 150  -  total flux cleaned = 0.00596891 Jy
! Component: 200  -  total flux cleaned = 0.00707089 Jy
! Total flux subtracted in 200 components = 0.00707089 Jy
! Clean residual min=-0.001872 max=0.002430 Jy/beam
! Clean residual mean=0.000007 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.261196 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 180 components and 0.261196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058066Jy  sigma=1.342180
! Fit after  self-cal, rms=0.058062Jy  sigma=1.342024
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058062Jy  sigma=1.342024
! Fit after  self-cal, rms=0.058086Jy  sigma=1.341837
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.112 mas, bmaj=2.78 mas, bpa=17.18 degrees
! Estimated noise=0.238184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139437 Jy
! Component: 100  -  total flux cleaned = 0.00241435 Jy
! Component: 150  -  total flux cleaned = 0.00329111 Jy
! Component: 200  -  total flux cleaned = 0.00397305 Jy
! Total flux subtracted in 200 components = 0.00397305 Jy
! Clean residual min=-0.001766 max=0.002217 Jy/beam
! Clean residual mean=0.000006 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.265169 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 197 components and 0.265168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058024Jy  sigma=1.340154
! Fit after  self-cal, rms=0.058023Jy  sigma=1.340093
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000847629 Jy
! Component: 100  -  total flux cleaned = 0.00146044 Jy
! Component: 150  -  total flux cleaned = 0.00205958 Jy
! Component: 200  -  total flux cleaned = 0.00264555 Jy
! Total flux subtracted in 200 components = 0.00264555 Jy
! Clean residual min=-0.001703 max=0.002152 Jy/beam
! Clean residual mean=0.000005 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.267814 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 215 components and 0.267814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057988Jy  sigma=1.339165
! Fit after  self-cal, rms=0.057978Jy  sigma=1.338658
! Inverting map 
! Added new window around map position (48.2, -41.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191056 Jy
! Component: 100  -  total flux cleaned = 0.00262607 Jy
! Component: 150  -  total flux cleaned = 0.00333897 Jy
! Component: 200  -  total flux cleaned = 0.00396001 Jy
! Total flux subtracted in 200 components = 0.00396001 Jy
! Clean residual min=-0.001644 max=0.001795 Jy/beam
! Clean residual mean=0.000003 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.271774 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 231 components and 0.271774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057905Jy  sigma=1.336692
! Fit after  self-cal, rms=0.057901Jy  sigma=1.336587
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057901Jy  sigma=1.336587
! Fit after  self-cal, rms=0.057875Jy  sigma=1.336308
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.271 mas, bmaj=3.505 mas, bpa=3.143 degrees
! Estimated noise=0.275303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014437 Jy
! Component: 100  -  total flux cleaned = 0.00236822 Jy
! Component: 150  -  total flux cleaned = 0.00316042 Jy
! Component: 200  -  total flux cleaned = 0.00381535 Jy
! Total flux subtracted in 200 components = 0.00381535 Jy
! Clean residual min=-0.002053 max=0.002029 Jy/beam
! Clean residual mean=0.000005 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.275589 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 250 components and 0.275589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057851Jy  sigma=1.335467
! Fit after  self-cal, rms=0.057848Jy  sigma=1.335407
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000477982 Jy
! Component: 100  -  total flux cleaned = 0.00101637 Jy
! Component: 150  -  total flux cleaned = 0.00149264 Jy
! Component: 200  -  total flux cleaned = 0.00191929 Jy
! Total flux subtracted in 200 components = 0.00191929 Jy
! Clean residual min=-0.001913 max=0.001868 Jy/beam
! Clean residual mean=0.000003 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.277509 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 261 components and 0.277509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057840Jy  sigma=1.335122
! Fit after  self-cal, rms=0.057839Jy  sigma=1.335086
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=2.78 mas, bpa=17.17 degrees
! Estimated noise=0.238122 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.113 x 2.78 at 17.17 degrees (North through East)
! Clean map  min=-0.0014905  max=0.13305 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8856 mas, bmaj=2.573 mas, bpa=19.93 degrees
! Estimated noise=0.40498 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0968586 Jy
! Component: 100  -  total flux cleaned = 0.130626 Jy
! Component: 150  -  total flux cleaned = 0.153656 Jy
! Component: 200  -  total flux cleaned = 0.170376 Jy
! Total flux subtracted in 200 components = 0.170376 Jy
! Clean residual min=-0.006514 max=0.009738 Jy/beam
! Clean residual mean=0.000040 rms=0.001865 Jy/beam
! Combined flux in latest and established models = 0.170376 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.170376 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=2.78 mas, bpa=17.17 degrees
! Estimated noise=0.238122 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0207117 Jy
! Component: 100  -  total flux cleaned = 0.0344745 Jy
! Component: 150  -  total flux cleaned = 0.0440234 Jy
! Component: 200  -  total flux cleaned = 0.0513735 Jy
! Total flux subtracted in 200 components = 0.0513735 Jy
! Clean residual min=-0.004589 max=0.004379 Jy/beam
! Clean residual mean=0.000022 rms=0.001213 Jy/beam
! Combined flux in latest and established models = 0.221749 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 59 components and 0.221749 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.271 mas, bmaj=3.505 mas, bpa=3.143 degrees
! Estimated noise=0.275303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00888589 Jy
! Component: 100  -  total flux cleaned = 0.0152436 Jy
! Component: 150  -  total flux cleaned = 0.0202921 Jy
! Component: 200  -  total flux cleaned = 0.0245535 Jy
! Total flux subtracted in 200 components = 0.0245535 Jy
! Clean residual min=-0.003891 max=0.003834 Jy/beam
! Clean residual mean=0.000023 rms=0.001141 Jy/beam
! Combined flux in latest and established models = 0.246303 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0036505 Jy
! Component: 100  -  total flux cleaned = 0.00680326 Jy
! Component: 150  -  total flux cleaned = 0.0095484 Jy
! Component: 200  -  total flux cleaned = 0.0119813 Jy
! Total flux subtracted in 200 components = 0.0119813 Jy
! Clean residual min=-0.003104 max=0.003001 Jy/beam
! Clean residual mean=0.000015 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.258284 Jy
! Adding 101 model components to the UV plane model.
! The established model now contains 148 components and 0.258284 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=2.78 mas, bpa=17.17 degrees
! Estimated noise=0.238122 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00229958 Jy
! Component: 100  -  total flux cleaned = 0.00403313 Jy
! Component: 150  -  total flux cleaned = 0.005318 Jy
! Component: 200  -  total flux cleaned = 0.00625173 Jy
! Total flux subtracted in 200 components = 0.00625173 Jy
! Clean residual min=-0.002045 max=0.002220 Jy/beam
! Clean residual mean=0.000006 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.264536 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 179 components and 0.264536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058062Jy  sigma=1.340257
! Fit after  self-cal, rms=0.058037Jy  sigma=1.339524
wmodel /J0106-0155_X_map.mod
! wmodel: Unable to open new model file: /J0106-0155_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0106-0155_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.113 x 2.78 at 17.17 degrees (North through East)
! Clean map  min=-0.0019466  max=0.13258 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0106-0155_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.132581 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000499417 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13007 1.13007 2.26013 4.52027 9.04053 18.0811 36.1621 72.3242
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.132 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  265.471 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0106-0155_X_dfm.log closed on Thu May 19 18:18:30 2016