! Started logfile: /scr/pima/bg219e_uvs/J0106-0155_S_uvs.log on Thu Apr  7 06:33:06 2016
obs /scr/pima/bg219e_uvs/J0106-0155_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0106-0155_S_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.894841 visibilities/baseline/integration-bin.
! Found source: J0106-0155
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5412 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0106-0155_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.101505Jy  sigma=22.575205
! Fit after  self-cal, rms=0.692145Jy  sigma=14.130231
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.458 mas, bmaj=9.465 mas, bpa=17.05 degrees
! Estimated noise=0.702056 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.23629 Jy
! Component: 100  -  total flux cleaned = 0.335676 Jy
! Total flux subtracted in 100 components = 0.335676 Jy
! Clean residual min=-0.020490 max=0.045944 Jy/beam
! Clean residual mean=0.000225 rms=0.007242 Jy/beam
! Combined flux in latest and established models = 0.335676 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.335676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144272Jy  sigma=2.864562
! Fit after  self-cal, rms=0.142531Jy  sigma=2.836993
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0533438 Jy
! Component: 100  -  total flux cleaned = 0.0811501 Jy
! Total flux subtracted in 100 components = 0.0811501 Jy
! Clean residual min=-0.017409 max=0.043257 Jy/beam
! Clean residual mean=0.000152 rms=0.005302 Jy/beam
! Combined flux in latest and established models = 0.416827 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.416827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111218Jy  sigma=2.214385
! Fit after  self-cal, rms=0.110972Jy  sigma=2.210777
! Inverting map 
! Added new window around map position (8.5, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0400962 Jy
! Component: 100  -  total flux cleaned = 0.062708 Jy
! Total flux subtracted in 100 components = 0.062708 Jy
! Clean residual min=-0.012541 max=0.021964 Jy/beam
! Clean residual mean=0.000103 rms=0.003614 Jy/beam
! Combined flux in latest and established models = 0.479535 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 42 components and 0.479534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088815Jy  sigma=1.754587
! Fit after  self-cal, rms=0.086919Jy  sigma=1.718280
! Inverting map 
! Added new window around map position (15, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0246774 Jy
! Component: 100  -  total flux cleaned = 0.0403739 Jy
! Total flux subtracted in 100 components = 0.0403739 Jy
! Clean residual min=-0.009831 max=0.012091 Jy/beam
! Clean residual mean=0.000073 rms=0.002486 Jy/beam
! Combined flux in latest and established models = 0.519908 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 62 components and 0.519909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076664Jy  sigma=1.507213
! Fit after  self-cal, rms=0.075558Jy  sigma=1.485763
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.094 mas, bmaj=10.23 mas, bpa=16.03 degrees
! Estimated noise=0.495287 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204884 Jy
! Component: 100  -  total flux cleaned = 0.034114 Jy
! Component: 150  -  total flux cleaned = 0.043783 Jy
! Component: 200  -  total flux cleaned = 0.0509495 Jy
! Total flux subtracted in 200 components = 0.0509495 Jy
! Clean residual min=-0.006181 max=0.007506 Jy/beam
! Clean residual mean=0.000042 rms=0.001730 Jy/beam
! Combined flux in latest and established models = 0.570858 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 113 components and 0.570858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068391Jy  sigma=1.340302
! Fit after  self-cal, rms=0.067647Jy  sigma=1.326283
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.094 x 10.23 at 16.03 degrees (North through East)
! Clean map  min=-0.0054123  max=0.3132 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.99     KP        0.99     
!   LA        0.98     NL        1.02     OV        1.00     PT        0.97     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.97     NL        1.01     OV        0.99     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.97     NL        1.00     OV        1.00     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.98     KP        0.97     
!   LA        1.00     NL        1.02     OV        1.02     PT        1.01     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.067647Jy  sigma=1.326283
! Fit after  self-cal, rms=0.065997Jy  sigma=1.311578
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.084 mas, bmaj=10.24 mas, bpa=16.17 degrees
! Estimated noise=0.488202 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00614333 Jy
! Component: 100  -  total flux cleaned = 0.00905431 Jy
! Component: 150  -  total flux cleaned = 0.0101853 Jy
! Component: 200  -  total flux cleaned = 0.0105785 Jy
! Total flux subtracted in 200 components = 0.0105785 Jy
! Clean residual min=-0.003795 max=0.005235 Jy/beam
! Clean residual mean=0.000014 rms=0.001107 Jy/beam
! Combined flux in latest and established models = 0.581436 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 155 components and 0.581436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065320Jy  sigma=1.297094
! Fit after  self-cal, rms=0.065217Jy  sigma=1.295173
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065217Jy  sigma=1.295173
! Fit after  self-cal, rms=0.064394Jy  sigma=1.282624
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.08 mas, bmaj=10.22 mas, bpa=16.09 degrees
! Estimated noise=0.48829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334563 Jy
! Component: 100  -  total flux cleaned = 0.00462921 Jy
! Component: 150  -  total flux cleaned = 0.0052985 Jy
! Component: 200  -  total flux cleaned = 0.00574239 Jy
! Total flux subtracted in 200 components = 0.00574239 Jy
! Clean residual min=-0.003215 max=0.004964 Jy/beam
! Clean residual mean=0.000012 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.587179 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 178 components and 0.587179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064158Jy  sigma=1.277769
! Fit after  self-cal, rms=0.064120Jy  sigma=1.277199
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.5, -116.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00428965 Jy
! Component: 100  -  total flux cleaned = 0.00665958 Jy
! Component: 150  -  total flux cleaned = 0.00791566 Jy
! Component: 200  -  total flux cleaned = 0.00878171 Jy
! Total flux subtracted in 200 components = 0.00878171 Jy
! Clean residual min=-0.002889 max=0.003511 Jy/beam
! Clean residual mean=0.000011 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.595961 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 203 components and 0.595961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063757Jy  sigma=1.270397
! Fit after  self-cal, rms=0.063736Jy  sigma=1.269944
! Inverting map 
! Added new window around map position (33, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00332659 Jy
! Component: 100  -  total flux cleaned = 0.0053434 Jy
! Component: 150  -  total flux cleaned = 0.00693418 Jy
! Component: 200  -  total flux cleaned = 0.00804285 Jy
! Total flux subtracted in 200 components = 0.00804285 Jy
! Clean residual min=-0.002728 max=0.002313 Jy/beam
! Clean residual mean=0.000008 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.604003 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 239 components and 0.604003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063519Jy  sigma=1.265479
! Fit after  self-cal, rms=0.063511Jy  sigma=1.265340
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063511Jy  sigma=1.265340
! Fit after  self-cal, rms=0.063481Jy  sigma=1.264847
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.08 mas, bmaj=10.22 mas, bpa=16.1 degrees
! Estimated noise=0.488395 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109746 Jy
! Component: 100  -  total flux cleaned = 0.00205987 Jy
! Component: 150  -  total flux cleaned = 0.00268224 Jy
! Component: 200  -  total flux cleaned = 0.00298872 Jy
! Total flux subtracted in 200 components = 0.00298872 Jy
! Clean residual min=-0.002480 max=0.002248 Jy/beam
! Clean residual mean=0.000006 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.606992 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 251 components and 0.606992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063406Jy  sigma=1.263356
! Fit after  self-cal, rms=0.063402Jy  sigma=1.263302
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000411942 Jy
! Component: 100  -  total flux cleaned = 0.000650247 Jy
! Component: 150  -  total flux cleaned = 0.000910173 Jy
! Component: 200  -  total flux cleaned = 0.000980657 Jy
! Total flux subtracted in 200 components = 0.000980657 Jy
! Clean residual min=-0.002398 max=0.002109 Jy/beam
! Clean residual mean=0.000005 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.607973 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 265 components and 0.607973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063359Jy  sigma=1.262480
! Fit after  self-cal, rms=0.063356Jy  sigma=1.262456
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063356Jy  sigma=1.262456
! Fit after  self-cal, rms=0.063378Jy  sigma=1.262359
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.776 mas, bmaj=12.7 mas, bpa=4.066 degrees
! Estimated noise=0.57928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105413 Jy
! Component: 100  -  total flux cleaned = 0.00131124 Jy
! Component: 150  -  total flux cleaned = 0.00160985 Jy
! Component: 200  -  total flux cleaned = 0.00190292 Jy
! Total flux subtracted in 200 components = 0.00190292 Jy
! Clean residual min=-0.002203 max=0.002028 Jy/beam
! Clean residual mean=0.000007 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.609876 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 288 components and 0.609876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063347Jy  sigma=1.261823
! Fit after  self-cal, rms=0.063343Jy  sigma=1.261751
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000133764 Jy
! Component: 100  -  total flux cleaned = 0.000278665 Jy
! Component: 150  -  total flux cleaned = 0.000387236 Jy
! Component: 200  -  total flux cleaned = 0.000462167 Jy
! Total flux subtracted in 200 components = 0.000462167 Jy
! Clean residual min=-0.002237 max=0.001983 Jy/beam
! Clean residual mean=0.000006 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.610338 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 307 components and 0.610338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063330Jy  sigma=1.261532
! Fit after  self-cal, rms=0.063328Jy  sigma=1.261489
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.081 mas, bmaj=10.22 mas, bpa=16.08 degrees
! Estimated noise=0.488602 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.081 x 10.22 at 16.08 degrees (North through East)
! Clean map  min=-0.0021274  max=0.30755 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.446 mas, bmaj=9.451 mas, bpa=17.11 degrees
! Estimated noise=0.69142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.232999 Jy
! Component: 100  -  total flux cleaned = 0.332509 Jy
! Component: 150  -  total flux cleaned = 0.391901 Jy
! Component: 200  -  total flux cleaned = 0.43516 Jy
! Total flux subtracted in 200 components = 0.43516 Jy
! Clean residual min=-0.011716 max=0.024671 Jy/beam
! Clean residual mean=0.000135 rms=0.004328 Jy/beam
! Combined flux in latest and established models = 0.43516 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.43516 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.081 mas, bmaj=10.22 mas, bpa=16.08 degrees
! Estimated noise=0.488602 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0476047 Jy
! Component: 100  -  total flux cleaned = 0.0791298 Jy
! Component: 150  -  total flux cleaned = 0.100944 Jy
! Component: 200  -  total flux cleaned = 0.116233 Jy
! Total flux subtracted in 200 components = 0.116233 Jy
! Clean residual min=-0.005806 max=0.008440 Jy/beam
! Clean residual mean=0.000052 rms=0.001877 Jy/beam
! Combined flux in latest and established models = 0.551393 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 67 components and 0.551393 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107654 Jy
! Component: 100  -  total flux cleaned = 0.01853 Jy
! Component: 150  -  total flux cleaned = 0.024505 Jy
! Component: 200  -  total flux cleaned = 0.0293993 Jy
! Total flux subtracted in 200 components = 0.0293993 Jy
! Clean residual min=-0.003879 max=0.003748 Jy/beam
! Clean residual mean=0.000022 rms=0.001028 Jy/beam
! Combined flux in latest and established models = 0.580792 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 102 components and 0.580792 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.776 mas, bmaj=12.7 mas, bpa=4.066 degrees
! Estimated noise=0.57928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00597796 Jy
! Component: 100  -  total flux cleaned = 0.0103545 Jy
! Component: 150  -  total flux cleaned = 0.0138364 Jy
! Component: 200  -  total flux cleaned = 0.0167292 Jy
! Total flux subtracted in 200 components = 0.0167292 Jy
! Clean residual min=-0.003145 max=0.003137 Jy/beam
! Clean residual mean=0.000020 rms=0.000878 Jy/beam
! Combined flux in latest and established models = 0.597522 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234909 Jy
! Component: 100  -  total flux cleaned = 0.00402877 Jy
! Component: 150  -  total flux cleaned = 0.00541733 Jy
! Component: 200  -  total flux cleaned = 0.00677228 Jy
! Total flux subtracted in 200 components = 0.00677228 Jy
! Clean residual min=-0.002398 max=0.002481 Jy/beam
! Clean residual mean=0.000013 rms=0.000721 Jy/beam
! Combined flux in latest and established models = 0.604294 Jy
! Adding 115 model components to the UV plane model.
! The established model now contains 206 components and 0.604294 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.081 mas, bmaj=10.22 mas, bpa=16.08 degrees
! Estimated noise=0.488602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.6863e-05 Jy
! Component: 100  -  total flux cleaned = 0.000773882 Jy
! Component: 150  -  total flux cleaned = 0.00125858 Jy
! Component: 200  -  total flux cleaned = 0.00169643 Jy
! Total flux subtracted in 200 components = 0.00169643 Jy
! Clean residual min=-0.002511 max=0.002586 Jy/beam
! Clean residual mean=0.000007 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.605991 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 228 components and 0.605991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063558Jy  sigma=1.265797
! Fit after  self-cal, rms=0.063547Jy  sigma=1.265384
wmodel /scr/pima/bg219e_uvs/J0106-0155_S_map.mod
! Writing 228 model components to file: /scr/pima/bg219e_uvs/J0106-0155_S_map.mod
wobs /scr/pima/bg219e_uvs/J0106-0155_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0106-0155_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J0106-0155_S_map.win
! wwins: Wrote 5 windows to /scr/pima/bg219e_uvs/J0106-0155_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000524839 Jy
! Component: 100  -  total flux cleaned = -0.000877862 Jy
! Component: 150  -  total flux cleaned = -0.00139674 Jy
! Component: 200  -  total flux cleaned = -0.00167827 Jy
! Component: 250  -  total flux cleaned = -0.00184691 Jy
! Component: 300  -  total flux cleaned = -0.00194445 Jy
! Component: 350  -  total flux cleaned = -0.00200837 Jy
! Component: 400  -  total flux cleaned = -0.00194707 Jy
! Component: 450  -  total flux cleaned = -0.00197747 Jy
! Component: 500  -  total flux cleaned = -0.0020061 Jy
! Component: 550  -  total flux cleaned = -0.00189138 Jy
! Component: 600  -  total flux cleaned = -0.00194816 Jy
! Component: 650  -  total flux cleaned = -0.00183836 Jy
! Component: 700  -  total flux cleaned = -0.00181168 Jy
! Component: 750  -  total flux cleaned = -0.00189093 Jy
! Component: 800  -  total flux cleaned = -0.00183856 Jy
! Component: 850  -  total flux cleaned = -0.0018642 Jy
! Component: 900  -  total flux cleaned = -0.00186459 Jy
! Component: 950  -  total flux cleaned = -0.0018401 Jy
! Component: 1000  -  total flux cleaned = -0.00193822 Jy
! Component: 1050  -  total flux cleaned = -0.00191394 Jy
! Component: 1100  -  total flux cleaned = -0.00186611 Jy
! Component: 1150  -  total flux cleaned = -0.00191322 Jy
! Component: 1200  -  total flux cleaned = -0.00184325 Jy
! Component: 1250  -  total flux cleaned = -0.0017974 Jy
! Component: 1300  -  total flux cleaned = -0.00177452 Jy
! Component: 1350  -  total flux cleaned = -0.00177421 Jy
! Component: 1400  -  total flux cleaned = -0.00172923 Jy
! Component: 1450  -  total flux cleaned = -0.00155339 Jy
! Component: 1500  -  total flux cleaned = -0.00153194 Jy
! Component: 1550  -  total flux cleaned = -0.00146768 Jy
! Component: 1600  -  total flux cleaned = -0.00140378 Jy
! Component: 1650  -  total flux cleaned = -0.00131995 Jy
! Component: 1700  -  total flux cleaned = -0.00131995 Jy
! Component: 1750  -  total flux cleaned = -0.00123707 Jy
! Component: 1800  -  total flux cleaned = -0.00103338 Jy
! Component: 1850  -  total flux cleaned = -0.000953107 Jy
! Component: 1900  -  total flux cleaned = -0.00089327 Jy
! Component: 1950  -  total flux cleaned = -0.000834111 Jy
! Component: 2000  -  total flux cleaned = -0.000677375 Jy
! Component: 2050  -  total flux cleaned = -0.000657799 Jy
! Component: 2100  -  total flux cleaned = -0.000523473 Jy
! Component: 2150  -  total flux cleaned = -0.000371028 Jy
! Component: 2200  -  total flux cleaned = -0.000220451 Jy
! Component: 2250  -  total flux cleaned = -0.000183145 Jy
! Component: 2300  -  total flux cleaned = -3.52467e-05 Jy
! Component: 2350  -  total flux cleaned = -1.69756e-05 Jy
! Component: 2400  -  total flux cleaned = 0.000128616 Jy
! Component: 2450  -  total flux cleaned = 0.000182592 Jy
! Component: 2500  -  total flux cleaned = 0.00023623 Jy
! Component: 2550  -  total flux cleaned = 0.000342451 Jy
! Component: 2600  -  total flux cleaned = 0.000412604 Jy
! Component: 2650  -  total flux cleaned = 0.000499693 Jy
! Component: 2700  -  total flux cleaned = 0.000516852 Jy
! Component: 2750  -  total flux cleaned = 0.000602921 Jy
! Component: 2800  -  total flux cleaned = 0.000619794 Jy
! Component: 2850  -  total flux cleaned = 0.000670477 Jy
! Component: 2900  -  total flux cleaned = 0.000703919 Jy
! Component: 2950  -  total flux cleaned = 0.000720399 Jy
! Component: 3000  -  total flux cleaned = 0.000704077 Jy
! Component: 3050  -  total flux cleaned = 0.000769755 Jy
! Component: 3100  -  total flux cleaned = 0.000769739 Jy
! Component: 3150  -  total flux cleaned = 0.000786074 Jy
! Component: 3200  -  total flux cleaned = 0.000818023 Jy
! Component: 3250  -  total flux cleaned = 0.000802168 Jy
! Component: 3300  -  total flux cleaned = 0.000865716 Jy
! Component: 3350  -  total flux cleaned = 0.000850057 Jy
! Component: 3400  -  total flux cleaned = 0.000896996 Jy
! Component: 3450  -  total flux cleaned = 0.000927988 Jy
! Component: 3500  -  total flux cleaned = 0.000912685 Jy
! Component: 3550  -  total flux cleaned = 0.000958519 Jy
! Component: 3600  -  total flux cleaned = 0.000912978 Jy
! Component: 3650  -  total flux cleaned = 0.000943153 Jy
! Component: 3700  -  total flux cleaned = 0.00100325 Jy
! Component: 3750  -  total flux cleaned = 0.00098831 Jy
! Component: 3800  -  total flux cleaned = 0.00100313 Jy
! Component: 3850  -  total flux cleaned = 0.00101795 Jy
! Component: 3900  -  total flux cleaned = 0.00100365 Jy
! Component: 3950  -  total flux cleaned = 0.0010473 Jy
! Component: 4000  -  total flux cleaned = 0.00107605 Jy
! Component: 4050  -  total flux cleaned = 0.0011192 Jy
! Total flux subtracted in 4096 components = 0.00110488 Jy
! Clean residual min=-0.000863 max=0.000827 Jy/beam
! Clean residual mean=0.000003 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.607095 Jy
keep
! Adding 257 model components to the UV plane model.
! The established model now contains 485 components and 0.607095 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0106-0155_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.081 x 10.22 at 16.08 degrees (North through East)
! Clean map  min=-0.0018499  max=0.30668 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0106-0155_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.30668 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000263332 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.257596 0.257596 0.515191 1.03038 2.06076 4.12153 8.24306 16.4861 32.9722 65.9445
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.306 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1164.62 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0106-0155_S_uvs.log closed on Thu Apr  7 06:33:10 2016