! Started logfile: /scr/pima/bg219e_uvs/J0058+0620_S_dfm.log on Thu May 19 18:18:06 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0058+0620_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0058+0620_S_uva.fits
! AN table 1: 68 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.868873 visibilities/baseline/integration-bin.
! Found source: J0058+0620
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 8508 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0058+0620_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014495Jy  sigma=21.724711
! Fit after  self-cal, rms=0.886098Jy  sigma=19.000560
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.744 mas, bmaj=8.919 mas, bpa=17.44 degrees
! Estimated noise=0.506387 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0900463 Jy
! Component: 100  -  total flux cleaned = 0.109682 Jy
! Total flux subtracted in 100 components = 0.109682 Jy
! Clean residual min=-0.003566 max=0.005479 Jy/beam
! Clean residual mean=0.000003 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 0.109682 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.109682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071548Jy  sigma=1.323287
! Fit after  self-cal, rms=0.071537Jy  sigma=1.323182
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00352877 Jy
! Component: 100  -  total flux cleaned = 0.00364804 Jy
! Total flux subtracted in 100 components = 0.00364804 Jy
! Clean residual min=-0.003503 max=0.003496 Jy/beam
! Clean residual mean=0.000000 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.11333 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.11333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071100Jy  sigma=1.317315
! Fit after  self-cal, rms=0.071097Jy  sigma=1.317241
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.542 mas, bmaj=9.612 mas, bpa=15.31 degrees
! Estimated noise=0.374009 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000291836 Jy
! Component: 100  -  total flux cleaned = 0.000100445 Jy
! Component: 150  -  total flux cleaned = -0.000103607 Jy
! Component: 200  -  total flux cleaned = -0.000266136 Jy
! Total flux subtracted in 200 components = -0.000266136 Jy
! Clean residual min=-0.003305 max=0.002599 Jy/beam
! Clean residual mean=-0.000001 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.113064 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 16 components and 0.113064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070939Jy  sigma=1.315924
! Fit after  self-cal, rms=0.070936Jy  sigma=1.315822
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.542 x 9.612 at 15.31 degrees (North through East)
! Clean map  min=-0.0032622  max=0.11634 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.00     KP        1.02     
!   LA        0.99     NL        1.02     OV        1.03     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.96     HN        1.01     KP        1.05     
!   LA        1.01     NL        1.00     OV        1.01     PT        1.02     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        1.02     KP        1.03     
!   LA        1.01     NL        1.01     OV        1.01     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.95     HN        0.95     KP        1.02     
!   LA        0.99     NL        0.95     OV        1.02     PT        0.97     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.070936Jy  sigma=1.315822
! Fit after  self-cal, rms=0.069399Jy  sigma=1.311704
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.537 mas, bmaj=9.604 mas, bpa=15.47 degrees
! Estimated noise=0.374573 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000426858 Jy
! Component: 100  -  total flux cleaned = 0.000619405 Jy
! Component: 150  -  total flux cleaned = 0.000722112 Jy
! Component: 200  -  total flux cleaned = 0.00076676 Jy
! Total flux subtracted in 200 components = 0.00076676 Jy
! Clean residual min=-0.002894 max=0.003049 Jy/beam
! Clean residual mean=-0.000000 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.113831 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.113831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069363Jy  sigma=1.311345
! Fit after  self-cal, rms=0.069339Jy  sigma=1.311228
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069339Jy  sigma=1.311228
! Fit after  self-cal, rms=0.069716Jy  sigma=1.307757
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.544 mas, bmaj=9.6 mas, bpa=15.41 degrees
! Estimated noise=0.378574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000513807 Jy
! Component: 100  -  total flux cleaned = 0.000290711 Jy
! Component: 150  -  total flux cleaned = 4.10107e-05 Jy
! Component: 200  -  total flux cleaned = -0.000125311 Jy
! Total flux subtracted in 200 components = -0.000125311 Jy
! Clean residual min=-0.002161 max=0.002619 Jy/beam
! Clean residual mean=-0.000000 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.113706 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 31 components and 0.113706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069646Jy  sigma=1.307370
! Fit after  self-cal, rms=0.069644Jy  sigma=1.307309
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-45, -64.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124875 Jy
! Component: 100  -  total flux cleaned = 0.00146657 Jy
! Component: 150  -  total flux cleaned = 0.00155682 Jy
! Component: 200  -  total flux cleaned = 0.00147402 Jy
! Total flux subtracted in 200 components = 0.00147402 Jy
! Clean residual min=-0.001873 max=0.002110 Jy/beam
! Clean residual mean=-0.000001 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.11518 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 58 components and 0.11518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069513Jy  sigma=1.305433
! Fit after  self-cal, rms=0.069504Jy  sigma=1.305262
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069504Jy  sigma=1.305262
! Fit after  self-cal, rms=0.069676Jy  sigma=1.305060
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.543 mas, bmaj=9.593 mas, bpa=15.37 degrees
! Estimated noise=0.380083 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000514326 Jy
! Component: 100  -  total flux cleaned = 0.000470481 Jy
! Component: 150  -  total flux cleaned = 0.000434545 Jy
! Component: 200  -  total flux cleaned = 0.000434731 Jy
! Total flux subtracted in 200 components = 0.000434731 Jy
! Clean residual min=-0.001893 max=0.002030 Jy/beam
! Clean residual mean=-0.000001 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.115614 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 68 components and 0.115614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069611Jy  sigma=1.304469
! Fit after  self-cal, rms=0.069608Jy  sigma=1.304446
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.00074e-05 Jy
! Component: 100  -  total flux cleaned = -6.01001e-05 Jy
! Component: 150  -  total flux cleaned = -8.9517e-05 Jy
! Component: 200  -  total flux cleaned = -0.000200448 Jy
! Total flux subtracted in 200 components = -0.000200448 Jy
! Clean residual min=-0.001901 max=0.002010 Jy/beam
! Clean residual mean=-0.000001 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.115414 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 75 components and 0.115414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069573Jy  sigma=1.304129
! Fit after  self-cal, rms=0.069572Jy  sigma=1.304120
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069572Jy  sigma=1.304120
! Fit after  self-cal, rms=0.067759Jy  sigma=1.301380
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.861 mas, bmaj=11.58 mas, bpa=2.528 degrees
! Estimated noise=0.428749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.87733e-05 Jy
! Component: 100  -  total flux cleaned = -8.05694e-05 Jy
! Component: 150  -  total flux cleaned = -8.07063e-05 Jy
! Component: 200  -  total flux cleaned = -0.000111561 Jy
! Total flux subtracted in 200 components = -0.000111561 Jy
! Clean residual min=-0.002003 max=0.001799 Jy/beam
! Clean residual mean=-0.000002 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.115302 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 90 components and 0.115302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067749Jy  sigma=1.301284
! Fit after  self-cal, rms=0.067727Jy  sigma=1.301229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.18593e-07 Jy
! Component: 100  -  total flux cleaned = -1.38177e-05 Jy
! Component: 150  -  total flux cleaned = -5.13211e-05 Jy
! Component: 200  -  total flux cleaned = -8.63601e-05 Jy
! Total flux subtracted in 200 components = -8.63601e-05 Jy
! Clean residual min=-0.001974 max=0.001809 Jy/beam
! Clean residual mean=-0.000002 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.115216 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 104 components and 0.115216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067721Jy  sigma=1.301171
! Fit after  self-cal, rms=0.067721Jy  sigma=1.301166
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.534 mas, bmaj=9.563 mas, bpa=15.36 degrees
! Estimated noise=0.379994 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.534 x 9.563 at 15.36 degrees (North through East)
! Clean map  min=-0.0039592  max=0.11944 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.744 mas, bmaj=8.881 mas, bpa=17.47 degrees
! Estimated noise=0.511365 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0909294 Jy
! Component: 100  -  total flux cleaned = 0.110758 Jy
! Component: 150  -  total flux cleaned = 0.115078 Jy
! Component: 200  -  total flux cleaned = 0.115705 Jy
! Total flux subtracted in 200 components = 0.115705 Jy
! Clean residual min=-0.002985 max=0.002676 Jy/beam
! Clean residual mean=0.000000 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.115705 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.115705 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.534 mas, bmaj=9.563 mas, bpa=15.36 degrees
! Estimated noise=0.379994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111389 Jy
! Component: 100  -  total flux cleaned = 0.000938167 Jy
! Component: 150  -  total flux cleaned = 0.000929601 Jy
! Component: 200  -  total flux cleaned = 0.00080188 Jy
! Total flux subtracted in 200 components = 0.00080188 Jy
! Clean residual min=-0.001989 max=0.002028 Jy/beam
! Clean residual mean=-0.000001 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.116507 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 32 components and 0.116507 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.861 mas, bmaj=11.58 mas, bpa=2.528 degrees
! Estimated noise=0.428749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00023301 Jy
! Component: 100  -  total flux cleaned = -0.000671357 Jy
! Component: 150  -  total flux cleaned = -0.000864717 Jy
! Component: 200  -  total flux cleaned = -0.000934099 Jy
! Total flux subtracted in 200 components = -0.000934099 Jy
! Clean residual min=-0.002026 max=0.001816 Jy/beam
! Clean residual mean=-0.000002 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.115573 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.06558e-05 Jy
! Component: 100  -  total flux cleaned = -3.06893e-05 Jy
! Component: 150  -  total flux cleaned = -5.71543e-05 Jy
! Component: 200  -  total flux cleaned = -8.1335e-05 Jy
! Total flux subtracted in 200 components = -8.1335e-05 Jy
! Clean residual min=-0.001974 max=0.001831 Jy/beam
! Clean residual mean=-0.000002 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.115492 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 53 components and 0.115492 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.534 mas, bmaj=9.563 mas, bpa=15.36 degrees
! Estimated noise=0.379994 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.86088e-05 Jy
! Component: 100  -  total flux cleaned = -8.95388e-05 Jy
! Component: 150  -  total flux cleaned = -2.41316e-05 Jy
! Component: 200  -  total flux cleaned = 6.7526e-05 Jy
! Total flux subtracted in 200 components = 6.7526e-05 Jy
! Clean residual min=-0.001724 max=0.001928 Jy/beam
! Clean residual mean=-0.000001 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.115559 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 74 components and 0.115559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067755Jy  sigma=1.301543
! Fit after  self-cal, rms=0.067756Jy  sigma=1.301515
wmodel /J0058+0620_S_map.mod
! wmodel: Unable to open new model file: /J0058+0620_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0058+0620_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.534 x 9.563 at 15.36 degrees (North through East)
! Clean map  min=-0.0038511  max=0.11915 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0058+0620_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.119148 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000467801 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.17787 1.17787 2.35573 4.71146 9.42293 18.8459 37.6917 75.3834
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.119 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  254.697 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0058+0620_S_dfm.log closed on Thu May 19 18:18:09 2016