! Started logfile: /scr/pima/bg219e_uvs/J0053-0727_S_dfm.log on Thu May 19 18:17:43 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0053-0727_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0053-0727_S_uva.fits
! AN table 1: 61 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.833789 visibilities/baseline/integration-bin.
! Found source: J0053-0727
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7324 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0053-0727_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012573Jy  sigma=19.996938
! Fit after  self-cal, rms=0.836472Jy  sigma=16.397836
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.483 mas, bmaj=9.891 mas, bpa=18.23 degrees
! Estimated noise=0.650623 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.122941 Jy
! Component: 100  -  total flux cleaned = 0.170811 Jy
! Total flux subtracted in 100 components = 0.170811 Jy
! Clean residual min=-0.009025 max=0.021379 Jy/beam
! Clean residual mean=-0.000030 rms=0.002871 Jy/beam
! Combined flux in latest and established models = 0.170811 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.170811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088272Jy  sigma=1.567097
! Fit after  self-cal, rms=0.087098Jy  sigma=1.551385
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0257251 Jy
! Component: 100  -  total flux cleaned = 0.0392722 Jy
! Total flux subtracted in 100 components = 0.0392722 Jy
! Clean residual min=-0.005389 max=0.009144 Jy/beam
! Clean residual mean=-0.000012 rms=0.001610 Jy/beam
! Combined flux in latest and established models = 0.210083 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 41 components and 0.210083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078206Jy  sigma=1.365282
! Fit after  self-cal, rms=0.077743Jy  sigma=1.358025
! Inverting map 
! Added new window around map position (-1, -9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103934 Jy
! Component: 100  -  total flux cleaned = 0.0164528 Jy
! Total flux subtracted in 100 components = 0.0164528 Jy
! Clean residual min=-0.004764 max=0.006149 Jy/beam
! Clean residual mean=-0.000004 rms=0.001250 Jy/beam
! Combined flux in latest and established models = 0.226536 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 54 components and 0.226536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076313Jy  sigma=1.332218
! Fit after  self-cal, rms=0.076176Jy  sigma=1.330434
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.321 mas, bmaj=11.22 mas, bpa=15.71 degrees
! Estimated noise=0.465841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359723 Jy
! Component: 100  -  total flux cleaned = 0.00445823 Jy
! Component: 150  -  total flux cleaned = 0.00492064 Jy
! Component: 200  -  total flux cleaned = 0.00513527 Jy
! Total flux subtracted in 200 components = 0.00513527 Jy
! Clean residual min=-0.003904 max=0.003190 Jy/beam
! Clean residual mean=-0.000004 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.231671 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 64 components and 0.231671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075912Jy  sigma=1.327065
! Fit after  self-cal, rms=0.075882Jy  sigma=1.326567
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.321 x 11.22 at 15.71 degrees (North through East)
! Clean map  min=-0.0040231  max=0.15584 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.04     KP        1.03     
!   LA        0.98     NL        0.97     OV        1.00     PT        1.01     
!   SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.02     KP        1.02     
!   LA        1.02     NL        0.90     OV        1.00     PT        1.02     
!   SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.00     KP        1.02     
!   LA        1.03     NL        1.00     OV        1.03     PT        1.04     
!   SC        0.93     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        0.99     KP        0.99     
!   LA        1.02     NL        0.97     OV        0.99     PT        1.02     
!   SC        0.95     
! 
! 
! Fit before self-cal, rms=0.075882Jy  sigma=1.326567
! Fit after  self-cal, rms=0.074105Jy  sigma=1.318599
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.285 mas, bmaj=11.17 mas, bpa=16.13 degrees
! Estimated noise=0.463142 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134832 Jy
! Component: 100  -  total flux cleaned = 0.00180699 Jy
! Component: 150  -  total flux cleaned = 0.002119 Jy
! Component: 200  -  total flux cleaned = 0.00238308 Jy
! Total flux subtracted in 200 components = 0.00238308 Jy
! Clean residual min=-0.002753 max=0.002854 Jy/beam
! Clean residual mean=-0.000003 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.234054 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 78 components and 0.234054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074008Jy  sigma=1.317202
! Fit after  self-cal, rms=0.073968Jy  sigma=1.316861
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073968Jy  sigma=1.316861
! Fit after  self-cal, rms=0.071401Jy  sigma=1.304378
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.263 mas, bmaj=11.15 mas, bpa=16.27 degrees
! Estimated noise=0.461147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000422752 Jy
! Component: 100  -  total flux cleaned = 0.000509936 Jy
! Component: 150  -  total flux cleaned = 0.000582096 Jy
! Component: 200  -  total flux cleaned = 0.000680467 Jy
! Total flux subtracted in 200 components = 0.000680467 Jy
! Clean residual min=-0.002444 max=0.002556 Jy/beam
! Clean residual mean=-0.000006 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.234735 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 84 components and 0.234735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071360Jy  sigma=1.303619
! Fit after  self-cal, rms=0.071337Jy  sigma=1.303453
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (107.5, 117).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000571742 Jy
! Component: 100  -  total flux cleaned = 0.00010252 Jy
! Component: 150  -  total flux cleaned = 5.88739e-05 Jy
! Component: 200  -  total flux cleaned = 0.000170678 Jy
! Total flux subtracted in 200 components = 0.000170678 Jy
! Clean residual min=-0.002308 max=0.002350 Jy/beam
! Clean residual mean=-0.000005 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.234906 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 98 components and 0.234906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071243Jy  sigma=1.301428
! Fit after  self-cal, rms=0.071240Jy  sigma=1.301282
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071240Jy  sigma=1.301282
! Fit after  self-cal, rms=0.071155Jy  sigma=1.301222
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.256 mas, bmaj=11.15 mas, bpa=16.32 degrees
! Estimated noise=0.460641 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000238597 Jy
! Component: 100  -  total flux cleaned = 0.000277566 Jy
! Component: 150  -  total flux cleaned = 0.00037873 Jy
! Component: 200  -  total flux cleaned = 0.000473241 Jy
! Total flux subtracted in 200 components = 0.000473241 Jy
! Clean residual min=-0.002241 max=0.002244 Jy/beam
! Clean residual mean=-0.000005 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.235379 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 100 components and 0.235379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071124Jy  sigma=1.300543
! Fit after  self-cal, rms=0.071120Jy  sigma=1.300506
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.57042e-06 Jy
! Component: 100  -  total flux cleaned = 9.68239e-05 Jy
! Component: 150  -  total flux cleaned = 0.000185084 Jy
! Component: 200  -  total flux cleaned = 0.000269508 Jy
! Total flux subtracted in 200 components = 0.000269508 Jy
! Clean residual min=-0.002228 max=0.002183 Jy/beam
! Clean residual mean=-0.000006 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.235648 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 104 components and 0.235648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071098Jy  sigma=1.300044
! Fit after  self-cal, rms=0.071094Jy  sigma=1.300018
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071094Jy  sigma=1.300018
! Fit after  self-cal, rms=0.071080Jy  sigma=1.299990
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.064 mas, bmaj=14.7 mas, bpa=5.484 degrees
! Estimated noise=0.532513 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142306 Jy
! Component: 100  -  total flux cleaned = 0.00023339 Jy
! Component: 150  -  total flux cleaned = 0.000247382 Jy
! Component: 200  -  total flux cleaned = 0.000309976 Jy
! Total flux subtracted in 200 components = 0.000309976 Jy
! Clean residual min=-0.002331 max=0.002427 Jy/beam
! Clean residual mean=-0.000009 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.235958 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 119 components and 0.235958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071078Jy  sigma=1.299868
! Fit after  self-cal, rms=0.071076Jy  sigma=1.299846
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.37737e-06 Jy
! Component: 100  -  total flux cleaned = 3.14203e-05 Jy
! Component: 150  -  total flux cleaned = 5.33727e-05 Jy
! Component: 200  -  total flux cleaned = 7.34311e-05 Jy
! Total flux subtracted in 200 components = 7.34311e-05 Jy
! Clean residual min=-0.002301 max=0.002387 Jy/beam
! Clean residual mean=-0.000009 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.236032 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 134 components and 0.236032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071076Jy  sigma=1.299809
! Fit after  self-cal, rms=0.071076Jy  sigma=1.299797
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.254 mas, bmaj=11.15 mas, bpa=16.33 degrees
! Estimated noise=0.460526 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.254 x 11.15 at 16.33 degrees (North through East)
! Clean map  min=-0.0021616  max=0.15394 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.444 mas, bmaj=9.894 mas, bpa=18.67 degrees
! Estimated noise=0.634726 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.123065 Jy
! Component: 100  -  total flux cleaned = 0.171727 Jy
! Component: 150  -  total flux cleaned = 0.194911 Jy
! Component: 200  -  total flux cleaned = 0.208868 Jy
! Total flux subtracted in 200 components = 0.208868 Jy
! Clean residual min=-0.004405 max=0.007214 Jy/beam
! Clean residual mean=-0.000014 rms=0.001278 Jy/beam
! Combined flux in latest and established models = 0.208868 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.208868 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.254 mas, bmaj=11.15 mas, bpa=16.33 degrees
! Estimated noise=0.460526 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112297 Jy
! Component: 100  -  total flux cleaned = 0.0175282 Jy
! Component: 150  -  total flux cleaned = 0.020729 Jy
! Component: 200  -  total flux cleaned = 0.0226867 Jy
! Total flux subtracted in 200 components = 0.0226867 Jy
! Clean residual min=-0.002657 max=0.002571 Jy/beam
! Clean residual mean=-0.000009 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.231555 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 74 components and 0.231555 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.064 mas, bmaj=14.7 mas, bpa=5.484 degrees
! Estimated noise=0.532513 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020667 Jy
! Component: 100  -  total flux cleaned = 0.00288682 Jy
! Component: 150  -  total flux cleaned = 0.00347528 Jy
! Component: 200  -  total flux cleaned = 0.00365985 Jy
! Total flux subtracted in 200 components = 0.00365985 Jy
! Clean residual min=-0.002306 max=0.002207 Jy/beam
! Clean residual mean=-0.000009 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.235214 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128285 Jy
! Component: 100  -  total flux cleaned = 0.000242004 Jy
! Component: 150  -  total flux cleaned = 0.000293051 Jy
! Component: 200  -  total flux cleaned = 0.000362332 Jy
! Total flux subtracted in 200 components = 0.000362332 Jy
! Clean residual min=-0.002262 max=0.002261 Jy/beam
! Clean residual mean=-0.000009 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.235577 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 123 components and 0.235577 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.254 mas, bmaj=11.15 mas, bpa=16.33 degrees
! Estimated noise=0.460526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.2708e-05 Jy
! Component: 100  -  total flux cleaned = 1.79451e-05 Jy
! Component: 150  -  total flux cleaned = 0.000131955 Jy
! Component: 200  -  total flux cleaned = 0.000271099 Jy
! Total flux subtracted in 200 components = 0.000271099 Jy
! Clean residual min=-0.002354 max=0.002164 Jy/beam
! Clean residual mean=-0.000005 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.235848 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 143 components and 0.235848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071112Jy  sigma=1.300218
! Fit after  self-cal, rms=0.071080Jy  sigma=1.299851
wmodel /J0053-0727_S_map.mod
! wmodel: Unable to open new model file: /J0053-0727_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0053-0727_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.254 x 11.15 at 16.33 degrees (North through East)
! Clean map  min=-0.0022934  max=0.1535 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0053-0727_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.153505 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000549474 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.07386 1.07386 2.14771 4.29543 8.59086 17.1817 34.3634 68.7269
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.153 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  279.366 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0053-0727_S_dfm.log closed on Thu May 19 18:17:46 2016