! Started logfile: /scr/pima/bg219e_uvs/J0051-0650_X_dfm.log on Thu May 19 18:17:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0051-0650_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0051-0650_X_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.905864 visibilities/baseline/integration-bin.
! Found source: J0051-0650
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 14088 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0051-0650_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.219324Jy  sigma=23.572036
! Fit after  self-cal, rms=0.346725Jy  sigma=6.657936
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8628 mas, bmaj=2.682 mas, bpa=20.83 degrees
! Estimated noise=0.556741 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.495876 Jy
! Component: 100  -  total flux cleaned = 0.617779 Jy
! Total flux subtracted in 100 components = 0.617779 Jy
! Clean residual min=-0.018397 max=0.050282 Jy/beam
! Clean residual mean=0.000012 rms=0.005516 Jy/beam
! Combined flux in latest and established models = 0.617779 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.617779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.127119Jy  sigma=2.408909
! Fit after  self-cal, rms=0.126877Jy  sigma=2.405945
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0541017 Jy
! Component: 100  -  total flux cleaned = 0.0835361 Jy
! Total flux subtracted in 100 components = 0.0835361 Jy
! Clean residual min=-0.010861 max=0.028881 Jy/beam
! Clean residual mean=0.000013 rms=0.003066 Jy/beam
! Combined flux in latest and established models = 0.701315 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 14 components and 0.701315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088460Jy  sigma=1.652174
! Fit after  self-cal, rms=0.088194Jy  sigma=1.647177
! Inverting map 
! Added new window around map position (-1.8, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0269802 Jy
! Component: 100  -  total flux cleaned = 0.0431344 Jy
! Total flux subtracted in 100 components = 0.0431344 Jy
! Clean residual min=-0.008309 max=0.009375 Jy/beam
! Clean residual mean=0.000012 rms=0.001986 Jy/beam
! Combined flux in latest and established models = 0.744449 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 0.744449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075088Jy  sigma=1.391691
! Fit after  self-cal, rms=0.074450Jy  sigma=1.378700
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013238 Jy
! Component: 100  -  total flux cleaned = 0.0221995 Jy
! Total flux subtracted in 100 components = 0.0221995 Jy
! Clean residual min=-0.006611 max=0.007485 Jy/beam
! Clean residual mean=0.000011 rms=0.001535 Jy/beam
! Combined flux in latest and established models = 0.766649 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 43 components and 0.766649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070200Jy  sigma=1.296878
! Fit after  self-cal, rms=0.070047Jy  sigma=1.293740
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.092 mas, bmaj=2.842 mas, bpa=18.93 degrees
! Estimated noise=0.33696 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126334 Jy
! Component: 100  -  total flux cleaned = 0.0208261 Jy
! Component: 150  -  total flux cleaned = 0.0269794 Jy
! Component: 200  -  total flux cleaned = 0.0318346 Jy
! Total flux subtracted in 200 components = 0.0318346 Jy
! Clean residual min=-0.005278 max=0.009028 Jy/beam
! Clean residual mean=0.000043 rms=0.001711 Jy/beam
! Combined flux in latest and established models = 0.798483 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 94 components and 0.798483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067087Jy  sigma=1.239038
! Fit after  self-cal, rms=0.067018Jy  sigma=1.237569
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.092 x 2.842 at 18.93 degrees (North through East)
! Clean map  min=-0.005025  max=0.65753 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.03     KP        1.00     
!   LA        1.00     NL        1.01     OV        0.99     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.01     KP        1.01     
!   LA        1.00     NL        1.03     OV        0.98     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.00     OV        1.00     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.02     OV        1.00     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.99     
!   LA        1.00     NL        1.02     OV        0.99     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.98     NL        1.02     OV        0.99     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.99     NL        1.01     OV        0.99     PT        1.02     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.98     
!   LA        0.98     NL        1.01     OV        0.99     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.99     KP        0.99     
!   LA        0.98     NL        1.00     OV        1.00     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.01     OV        0.99     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.98     NL        1.01     OV        1.00     PT        0.97     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.067018Jy  sigma=1.237569
! Fit after  self-cal, rms=0.065352Jy  sigma=1.207974
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=2.853 mas, bpa=18.95 degrees
! Estimated noise=0.335869 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.2, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00853132 Jy
! Component: 100  -  total flux cleaned = 0.013478 Jy
! Component: 150  -  total flux cleaned = 0.0169917 Jy
! Component: 200  -  total flux cleaned = 0.0198091 Jy
! Total flux subtracted in 200 components = 0.0198091 Jy
! Clean residual min=-0.003787 max=0.004613 Jy/beam
! Clean residual mean=0.000024 rms=0.001013 Jy/beam
! Combined flux in latest and established models = 0.818292 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 138 components and 0.818292 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064081Jy  sigma=1.183557
! Fit after  self-cal, rms=0.064015Jy  sigma=1.182284
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064015Jy  sigma=1.182284
! Fit after  self-cal, rms=0.063530Jy  sigma=1.174491
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=2.85 mas, bpa=18.93 degrees
! Estimated noise=0.335259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00297695 Jy
! Component: 100  -  total flux cleaned = 0.00462154 Jy
! Component: 150  -  total flux cleaned = 0.00556217 Jy
! Component: 200  -  total flux cleaned = 0.006439 Jy
! Total flux subtracted in 200 components = 0.006439 Jy
! Clean residual min=-0.002979 max=0.003473 Jy/beam
! Clean residual mean=0.000016 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.824731 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 167 components and 0.824731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063322Jy  sigma=1.170520
! Fit after  self-cal, rms=0.063310Jy  sigma=1.170319
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.4, 6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00328112 Jy
! Component: 100  -  total flux cleaned = 0.0047917 Jy
! Component: 150  -  total flux cleaned = 0.0060194 Jy
! Component: 200  -  total flux cleaned = 0.00710493 Jy
! Total flux subtracted in 200 components = 0.00710493 Jy
! Clean residual min=-0.002546 max=0.002886 Jy/beam
! Clean residual mean=0.000013 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.831836 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 200 components and 0.831836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063092Jy  sigma=1.166038
! Fit after  self-cal, rms=0.063076Jy  sigma=1.165727
! Inverting map 
! Added new window around map position (-26.4, -27).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285686 Jy
! Component: 100  -  total flux cleaned = 0.00453028 Jy
! Component: 150  -  total flux cleaned = 0.00551778 Jy
! Component: 200  -  total flux cleaned = 0.00640619 Jy
! Total flux subtracted in 200 components = 0.00640619 Jy
! Clean residual min=-0.002238 max=0.002463 Jy/beam
! Clean residual mean=0.000011 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.838242 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 234 components and 0.838242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062906Jy  sigma=1.162227
! Fit after  self-cal, rms=0.062895Jy  sigma=1.162016
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062895Jy  sigma=1.162016
! Fit after  self-cal, rms=0.062819Jy  sigma=1.161348
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=2.85 mas, bpa=18.94 degrees
! Estimated noise=0.334949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147018 Jy
! Component: 100  -  total flux cleaned = 0.00241306 Jy
! Component: 150  -  total flux cleaned = 0.0031995 Jy
! Component: 200  -  total flux cleaned = 0.00382385 Jy
! Total flux subtracted in 200 components = 0.00382385 Jy
! Clean residual min=-0.002040 max=0.002166 Jy/beam
! Clean residual mean=0.000010 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.842066 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 249 components and 0.842066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062738Jy  sigma=1.159719
! Fit after  self-cal, rms=0.062733Jy  sigma=1.159634
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000988178 Jy
! Component: 100  -  total flux cleaned = 0.00152322 Jy
! Component: 150  -  total flux cleaned = 0.0020957 Jy
! Component: 200  -  total flux cleaned = 0.00255965 Jy
! Total flux subtracted in 200 components = 0.00255965 Jy
! Clean residual min=-0.001960 max=0.002022 Jy/beam
! Clean residual mean=0.000009 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.844626 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 272 components and 0.844626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062690Jy  sigma=1.158749
! Fit after  self-cal, rms=0.062688Jy  sigma=1.158717
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062688Jy  sigma=1.158717
! Fit after  self-cal, rms=0.062666Jy  sigma=1.158614
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.197 mas, bmaj=3.698 mas, bpa=7.666 degrees
! Estimated noise=0.397228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000974359 Jy
! Component: 100  -  total flux cleaned = 0.00177602 Jy
! Component: 150  -  total flux cleaned = 0.00251525 Jy
! Component: 200  -  total flux cleaned = 0.00321336 Jy
! Total flux subtracted in 200 components = 0.00321336 Jy
! Clean residual min=-0.002112 max=0.002278 Jy/beam
! Clean residual mean=0.000015 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.84784 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 309 components and 0.84784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062632Jy  sigma=1.157847
! Fit after  self-cal, rms=0.062629Jy  sigma=1.157791
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000644244 Jy
! Component: 100  -  total flux cleaned = 0.00127461 Jy
! Component: 150  -  total flux cleaned = 0.00184508 Jy
! Component: 200  -  total flux cleaned = 0.00230766 Jy
! Total flux subtracted in 200 components = 0.00230766 Jy
! Clean residual min=-0.001989 max=0.002127 Jy/beam
! Clean residual mean=0.000013 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.850147 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 326 components and 0.850147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062613Jy  sigma=1.157459
! Fit after  self-cal, rms=0.062612Jy  sigma=1.157431
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=2.851 mas, bpa=18.94 degrees
! Estimated noise=0.334807 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.093 x 2.851 at 18.94 degrees (North through East)
! Clean map  min=-0.0017962  max=0.65507 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062612Jy  sigma=1.157431
! Fit after  self-cal, rms=0.058006Jy  sigma=1.055078
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=2.851 mas, bpa=18.96 degrees
! Estimated noise=0.334345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000573056 Jy
! Component: 100  -  total flux cleaned = -0.000550453 Jy
! Component: 150  -  total flux cleaned = -0.000288473 Jy
! Component: 200  -  total flux cleaned = -9.81322e-05 Jy
! Total flux subtracted in 200 components = -9.81322e-05 Jy
! Clean residual min=-0.001971 max=0.001930 Jy/beam
! Clean residual mean=0.000008 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.850049 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 348 components and 0.850049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057978Jy  sigma=1.054547
! Fit after  self-cal, rms=0.057978Jy  sigma=1.054534
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.7662e-05 Jy
! Component: 100  -  total flux cleaned = 0.000281214 Jy
! Component: 150  -  total flux cleaned = 0.000484728 Jy
! Component: 200  -  total flux cleaned = 0.000677932 Jy
! Total flux subtracted in 200 components = 0.000677932 Jy
! Clean residual min=-0.001928 max=0.001896 Jy/beam
! Clean residual mean=0.000007 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.850727 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 362 components and 0.850727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057964Jy  sigma=1.054291
! Fit after  self-cal, rms=0.057964Jy  sigma=1.054284
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057964Jy  sigma=1.054284
! Fit after  self-cal, rms=0.057849Jy  sigma=1.052492
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8632 mas, bmaj=2.69 mas, bpa=20.82 degrees
! Estimated noise=0.554363 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.493762 Jy
! Component: 100  -  total flux cleaned = 0.615777 Jy
! Component: 150  -  total flux cleaned = 0.670336 Jy
! Component: 200  -  total flux cleaned = 0.703402 Jy
! Total flux subtracted in 200 components = 0.703402 Jy
! Clean residual min=-0.008688 max=0.017474 Jy/beam
! Clean residual mean=0.000009 rms=0.002496 Jy/beam
! Combined flux in latest and established models = 0.703403 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.703403 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=2.852 mas, bpa=18.97 degrees
! Estimated noise=0.334087 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0322872 Jy
! Component: 100  -  total flux cleaned = 0.0509537 Jy
! Component: 150  -  total flux cleaned = 0.0633817 Jy
! Component: 200  -  total flux cleaned = 0.0728973 Jy
! Total flux subtracted in 200 components = 0.0728973 Jy
! Clean residual min=-0.004996 max=0.006523 Jy/beam
! Clean residual mean=0.000035 rms=0.001544 Jy/beam
! Combined flux in latest and established models = 0.7763 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 60 components and 0.7763 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.198 mas, bmaj=3.698 mas, bpa=7.695 degrees
! Estimated noise=0.396436 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121036 Jy
! Component: 100  -  total flux cleaned = 0.0212803 Jy
! Component: 150  -  total flux cleaned = 0.0285904 Jy
! Component: 200  -  total flux cleaned = 0.0345397 Jy
! Total flux subtracted in 200 components = 0.0345397 Jy
! Clean residual min=-0.004293 max=0.004991 Jy/beam
! Clean residual mean=0.000041 rms=0.001390 Jy/beam
! Combined flux in latest and established models = 0.81084 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0049538 Jy
! Component: 100  -  total flux cleaned = 0.00912103 Jy
! Component: 150  -  total flux cleaned = 0.0126685 Jy
! Component: 200  -  total flux cleaned = 0.0157351 Jy
! Total flux subtracted in 200 components = 0.0157351 Jy
! Clean residual min=-0.003033 max=0.002966 Jy/beam
! Clean residual mean=0.000030 rms=0.000979 Jy/beam
! Combined flux in latest and established models = 0.826575 Jy
! Adding 119 model components to the UV plane model.
! The established model now contains 162 components and 0.826575 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=2.852 mas, bpa=18.97 degrees
! Estimated noise=0.334087 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247981 Jy
! Component: 100  -  total flux cleaned = 0.00454043 Jy
! Component: 150  -  total flux cleaned = 0.00639695 Jy
! Component: 200  -  total flux cleaned = 0.00808656 Jy
! Total flux subtracted in 200 components = 0.00808656 Jy
! Clean residual min=-0.002183 max=0.002131 Jy/beam
! Clean residual mean=0.000013 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.834661 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 192 components and 0.834661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058082Jy  sigma=1.057019
! Fit after  self-cal, rms=0.058061Jy  sigma=1.056596
wmodel /J0051-0650_X_map.mod
! wmodel: Unable to open new model file: /J0051-0650_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0051-0650_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.093 x 2.852 at 18.97 degrees (North through East)
! Clean map  min=-0.0020364  max=0.65568 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0051-0650_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.655682 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00056313 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.257654 0.257654 0.515308 1.03062 2.06123 4.12247 8.24493 16.4899 32.9797 65.9595
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.655 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1164.35 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0051-0650_X_dfm.log closed on Thu May 19 18:17:42 2016