! Started logfile: /scr/pima/bg219e_uvs/J0048+0640_X_dfm.log on Thu May 19 18:17:16 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0048+0640_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0048+0640_X_uva.fits
! AN table 1: 52 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.834936 visibilities/baseline/integration-bin.
! Found source: J0048+0640
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18756 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0048+0640_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004547Jy  sigma=24.607662
! Fit after  self-cal, rms=0.923884Jy  sigma=22.598748
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9004 mas, bmaj=2.43 mas, bpa=22.22 degrees
! Estimated noise=0.377748 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0553558 Jy
! Component: 100  -  total flux cleaned = 0.0712925 Jy
! Total flux subtracted in 100 components = 0.0712925 Jy
! Clean residual min=-0.008758 max=0.024053 Jy/beam
! Clean residual mean=-0.000005 rms=0.002527 Jy/beam
! Combined flux in latest and established models = 0.0712925 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0712925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070832Jy  sigma=1.675874
! Fit after  self-cal, rms=0.069668Jy  sigma=1.648139
! Inverting map 
! Added new window around map position (2.8, 3.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0197937 Jy
! Component: 100  -  total flux cleaned = 0.0284624 Jy
! Total flux subtracted in 100 components = 0.0284624 Jy
! Clean residual min=-0.006295 max=0.022451 Jy/beam
! Clean residual mean=-0.000005 rms=0.001909 Jy/beam
! Combined flux in latest and established models = 0.0997548 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 0.0997548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064596Jy  sigma=1.514644
! Fit after  self-cal, rms=0.062413Jy  sigma=1.462373
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013551 Jy
! Component: 100  -  total flux cleaned = 0.0173533 Jy
! Total flux subtracted in 100 components = 0.0173533 Jy
! Clean residual min=-0.004837 max=0.013606 Jy/beam
! Clean residual mean=-0.000003 rms=0.001339 Jy/beam
! Combined flux in latest and established models = 0.117108 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 24 components and 0.117108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060141Jy  sigma=1.401874
! Fit after  self-cal, rms=0.059082Jy  sigma=1.377655
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00817257 Jy
! Component: 100  -  total flux cleaned = 0.00835509 Jy
! Total flux subtracted in 100 components = 0.00835509 Jy
! Clean residual min=-0.003910 max=0.008158 Jy/beam
! Clean residual mean=-0.000001 rms=0.000987 Jy/beam
! Combined flux in latest and established models = 0.125463 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 0.125463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058294Jy  sigma=1.356174
! Fit after  self-cal, rms=0.057910Jy  sigma=1.347256
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.185 mas, bmaj=2.593 mas, bpa=19.86 degrees
! Estimated noise=0.226294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00356055 Jy
! Component: 100  -  total flux cleaned = 0.00382746 Jy
! Component: 150  -  total flux cleaned = 0.00369623 Jy
! Component: 200  -  total flux cleaned = 0.00359507 Jy
! Total flux subtracted in 200 components = 0.00359507 Jy
! Clean residual min=-0.002149 max=0.004875 Jy/beam
! Clean residual mean=0.000000 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.129058 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 39 components and 0.129058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057581Jy  sigma=1.337950
! Fit after  self-cal, rms=0.057427Jy  sigma=1.334700
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.185 x 2.593 at 19.86 degrees (North through East)
! Clean map  min=-0.0020709  max=0.06578 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.02     KP        0.99     
!   LA        0.97     NL        1.01     OV        1.00     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.07     KP        0.98     
!   LA        1.02     NL        1.00     OV        1.00     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.01     KP        1.00     
!   LA        0.94     NL        1.00     OV        1.03     PT        0.97     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        1.00     
!   LA        0.98     NL        1.04     OV        0.99     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.09     KP        1.02     
!   LA        1.00     NL        1.02     OV        0.99     PT        1.05     
!   SC        0.91     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.96     KP        1.00     
!   LA        1.03     NL        1.04     OV        0.98     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.00     KP        0.98     
!   LA        1.03     NL        1.00     OV        0.98     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.06     KP        0.98     
!   LA        1.00     NL        1.01     OV        1.03     PT        0.96     
!   SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.01     KP        1.00     
!   LA        1.05     NL        0.96     OV        1.00     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.97     HN        0.98     KP        0.98     
!   LA        1.03     NL        1.05     OV        0.98     PT        1.01     
!   SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        0.97     KP        1.01     
!   LA        1.03     NL        1.02     OV        1.03     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.98     KP        1.02     
!   LA        0.98     NL        1.04     OV        1.00     PT        1.01     
!   SC        0.95     
! 
! 
! Fit before self-cal, rms=0.057427Jy  sigma=1.334700
! Fit after  self-cal, rms=0.057259Jy  sigma=1.332344
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.181 mas, bmaj=2.6 mas, bpa=20.09 degrees
! Estimated noise=0.22562 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192977 Jy
! Component: 100  -  total flux cleaned = 0.00248429 Jy
! Component: 150  -  total flux cleaned = 0.00249342 Jy
! Component: 200  -  total flux cleaned = 0.00239792 Jy
! Total flux subtracted in 200 components = 0.00239792 Jy
! Clean residual min=-0.001877 max=0.001666 Jy/beam
! Clean residual mean=0.000000 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.131456 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.131456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057025Jy  sigma=1.325839
! Fit after  self-cal, rms=0.056980Jy  sigma=1.325130
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056980Jy  sigma=1.325130
! Fit after  self-cal, rms=0.057003Jy  sigma=1.322060
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.18 mas, bmaj=2.601 mas, bpa=20.11 degrees
! Estimated noise=0.225367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000200862 Jy
! Component: 100  -  total flux cleaned = 0.000165015 Jy
! Component: 150  -  total flux cleaned = -4.67652e-05 Jy
! Component: 200  -  total flux cleaned = -0.000169147 Jy
! Total flux subtracted in 200 components = -0.000169147 Jy
! Clean residual min=-0.001858 max=0.001506 Jy/beam
! Clean residual mean=0.000001 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.131287 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 63 components and 0.131287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056948Jy  sigma=1.320443
! Fit after  self-cal, rms=0.056942Jy  sigma=1.320103
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.0803e-05 Jy
! Component: 100  -  total flux cleaned = -7.23967e-05 Jy
! Component: 150  -  total flux cleaned = -0.000148264 Jy
! Component: 200  -  total flux cleaned = -0.000172115 Jy
! Total flux subtracted in 200 components = -0.000172115 Jy
! Clean residual min=-0.001723 max=0.001391 Jy/beam
! Clean residual mean=0.000000 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.131115 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 75 components and 0.131115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056914Jy  sigma=1.319294
! Fit after  self-cal, rms=0.056904Jy  sigma=1.319143
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056904Jy  sigma=1.319143
! Fit after  self-cal, rms=0.056838Jy  sigma=1.319088
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.181 mas, bmaj=2.599 mas, bpa=20.1 degrees
! Estimated noise=0.224949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.16385e-05 Jy
! Component: 100  -  total flux cleaned = 6.50934e-05 Jy
! Component: 150  -  total flux cleaned = 0.000108038 Jy
! Component: 200  -  total flux cleaned = 0.000107174 Jy
! Total flux subtracted in 200 components = 0.000107174 Jy
! Clean residual min=-0.001512 max=0.001311 Jy/beam
! Clean residual mean=0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.131222 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 81 components and 0.131222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056820Jy  sigma=1.318536
! Fit after  self-cal, rms=0.056815Jy  sigma=1.318438
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.89233e-05 Jy
! Component: 100  -  total flux cleaned = 5.63074e-05 Jy
! Component: 150  -  total flux cleaned = 7.62852e-05 Jy
! Component: 200  -  total flux cleaned = 7.65223e-05 Jy
! Total flux subtracted in 200 components = 7.65223e-05 Jy
! Clean residual min=-0.001441 max=0.001271 Jy/beam
! Clean residual mean=0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.131299 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 89 components and 0.131299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056803Jy  sigma=1.318076
! Fit after  self-cal, rms=0.056797Jy  sigma=1.318007
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056797Jy  sigma=1.318007
! Fit after  self-cal, rms=0.056765Jy  sigma=1.317989
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.31 mas, bmaj=3.116 mas, bpa=4.739 degrees
! Estimated noise=0.256264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131837 Jy
! Component: 100  -  total flux cleaned = 0.000117784 Jy
! Component: 150  -  total flux cleaned = 2.36677e-05 Jy
! Component: 200  -  total flux cleaned = -4.59288e-05 Jy
! Total flux subtracted in 200 components = -4.59288e-05 Jy
! Clean residual min=-0.001429 max=0.001389 Jy/beam
! Clean residual mean=0.000002 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.131253 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 102 components and 0.131253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056762Jy  sigma=1.317772
! Fit after  self-cal, rms=0.056759Jy  sigma=1.317706
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.79096e-05 Jy
! Component: 100  -  total flux cleaned = -8.75666e-05 Jy
! Component: 150  -  total flux cleaned = -0.000135597 Jy
! Component: 200  -  total flux cleaned = -0.000178843 Jy
! Total flux subtracted in 200 components = -0.000178843 Jy
! Clean residual min=-0.001394 max=0.001384 Jy/beam
! Clean residual mean=0.000002 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.131074 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 112 components and 0.131074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056756Jy  sigma=1.317561
! Fit after  self-cal, rms=0.056753Jy  sigma=1.317500
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.182 mas, bmaj=2.598 mas, bpa=20.07 degrees
! Estimated noise=0.224752 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.182 x 2.598 at 20.07 degrees (North through East)
! Clean map  min=-0.0012935  max=0.061752 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8955 mas, bmaj=2.441 mas, bpa=22.34 degrees
! Estimated noise=0.374582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0616005 Jy
! Component: 100  -  total flux cleaned = 0.0900874 Jy
! Component: 150  -  total flux cleaned = 0.104114 Jy
! Component: 200  -  total flux cleaned = 0.112178 Jy
! Total flux subtracted in 200 components = 0.112178 Jy
! Clean residual min=-0.003236 max=0.004357 Jy/beam
! Clean residual mean=-0.000003 rms=0.000778 Jy/beam
! Combined flux in latest and established models = 0.112178 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.112178 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.182 mas, bmaj=2.598 mas, bpa=20.07 degrees
! Estimated noise=0.224752 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00662199 Jy
! Component: 100  -  total flux cleaned = 0.0106273 Jy
! Component: 150  -  total flux cleaned = 0.0134904 Jy
! Component: 200  -  total flux cleaned = 0.0156277 Jy
! Total flux subtracted in 200 components = 0.0156277 Jy
! Clean residual min=-0.002041 max=0.001748 Jy/beam
! Clean residual mean=-0.000001 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.127806 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 50 components and 0.127806 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.31 mas, bmaj=3.116 mas, bpa=4.739 degrees
! Estimated noise=0.256264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219491 Jy
! Component: 100  -  total flux cleaned = 0.0026728 Jy
! Component: 150  -  total flux cleaned = 0.00279203 Jy
! Component: 200  -  total flux cleaned = 0.0028569 Jy
! Total flux subtracted in 200 components = 0.0028569 Jy
! Clean residual min=-0.001422 max=0.001552 Jy/beam
! Clean residual mean=0.000001 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.130663 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.77359e-05 Jy
! Component: 100  -  total flux cleaned = -3.0166e-06 Jy
! Component: 150  -  total flux cleaned = -2.93448e-06 Jy
! Component: 200  -  total flux cleaned = -3.23673e-06 Jy
! Total flux subtracted in 200 components = -3.23673e-06 Jy
! Clean residual min=-0.001367 max=0.001499 Jy/beam
! Clean residual mean=0.000001 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.130659 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 104 components and 0.13066 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.182 mas, bmaj=2.598 mas, bpa=20.07 degrees
! Estimated noise=0.224752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.2323e-05 Jy
! Component: 100  -  total flux cleaned = 0.000150017 Jy
! Component: 150  -  total flux cleaned = 0.000274709 Jy
! Component: 200  -  total flux cleaned = 0.000384167 Jy
! Total flux subtracted in 200 components = 0.000384167 Jy
! Clean residual min=-0.001510 max=0.001416 Jy/beam
! Clean residual mean=0.000001 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.131044 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 122 components and 0.131044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056768Jy  sigma=1.317831
! Fit after  self-cal, rms=0.056754Jy  sigma=1.317559
wmodel /J0048+0640_X_map.mod
! wmodel: Unable to open new model file: /J0048+0640_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0048+0640_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.182 x 2.598 at 20.07 degrees (North through East)
! Clean map  min=-0.0013197  max=0.061553 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0048+0640_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0615527 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000329803 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.60742 1.60742 3.21484 6.42967 12.8593 25.7187 51.4374
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.061 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  186.634 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0048+0640_X_dfm.log closed on Thu May 19 18:17:19 2016