! Started logfile: /scr/pima/bg219e_uvs/J0037+0808_X_dfm.log on Thu May 19 18:16:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0037+0808_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0037+0808_X_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.877315 visibilities/baseline/integration-bin.
! Found source: J0037+0808
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13644 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0037+0808_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.028111Jy  sigma=24.284050
! Fit after  self-cal, rms=0.798783Jy  sigma=18.794353
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9245 mas, bmaj=2.409 mas, bpa=20.53 degrees
! Estimated noise=0.497855 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.149551 Jy
! Component: 100  -  total flux cleaned = 0.186975 Jy
! Total flux subtracted in 100 components = 0.186975 Jy
! Clean residual min=-0.008336 max=0.018927 Jy/beam
! Clean residual mean=-0.000013 rms=0.002316 Jy/beam
! Combined flux in latest and established models = 0.186975 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.186975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073571Jy  sigma=1.682602
! Fit after  self-cal, rms=0.073527Jy  sigma=1.681023
! Inverting map 
! Added new window around map position (-2, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209182 Jy
! Component: 100  -  total flux cleaned = 0.0344167 Jy
! Total flux subtracted in 100 components = 0.0344167 Jy
! Clean residual min=-0.005039 max=0.007215 Jy/beam
! Clean residual mean=-0.000005 rms=0.001364 Jy/beam
! Combined flux in latest and established models = 0.221392 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.221392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065068Jy  sigma=1.462878
! Fit after  self-cal, rms=0.064797Jy  sigma=1.456549
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100081 Jy
! Component: 100  -  total flux cleaned = 0.0165068 Jy
! Total flux subtracted in 100 components = 0.0165068 Jy
! Clean residual min=-0.003444 max=0.004566 Jy/beam
! Clean residual mean=-0.000002 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.237899 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 29 components and 0.237899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062588Jy  sigma=1.398707
! Fit after  self-cal, rms=0.062506Jy  sigma=1.396856
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.192 mas, bmaj=2.566 mas, bpa=17.54 degrees
! Estimated noise=0.281231 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00715759 Jy
! Component: 100  -  total flux cleaned = 0.0112786 Jy
! Component: 150  -  total flux cleaned = 0.0140003 Jy
! Component: 200  -  total flux cleaned = 0.0158395 Jy
! Total flux subtracted in 200 components = 0.0158395 Jy
! Clean residual min=-0.002227 max=0.003200 Jy/beam
! Clean residual mean=0.000000 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.253738 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 56 components and 0.253738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061653Jy  sigma=1.374840
! Fit after  self-cal, rms=0.061627Jy  sigma=1.374089
! Inverting map 
! Added new window around map position (-40, 29.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00281267 Jy
! Component: 100  -  total flux cleaned = 0.00416834 Jy
! Component: 150  -  total flux cleaned = 0.00473629 Jy
! Component: 200  -  total flux cleaned = 0.0050093 Jy
! Total flux subtracted in 200 components = 0.0050093 Jy
! Clean residual min=-0.001961 max=0.002112 Jy/beam
! Clean residual mean=-0.000001 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.258747 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 75 components and 0.258747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061487Jy  sigma=1.370625
! Fit after  self-cal, rms=0.061471Jy  sigma=1.370240
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.192 x 2.566 at 17.54 degrees (North through East)
! Clean map  min=-0.001885  max=0.19955 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.06     KP        0.97     
!   LA        0.99     NL        1.00     OV        1.00     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.00     KP        1.00     
!   LA        1.00     NL        1.01     OV        0.98     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.02     KP        1.01     
!   LA        0.97     NL        0.99     OV        0.98     PT        0.98     
!   SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        1.00     KP        0.98     
!   LA        1.00     NL        1.01     OV        1.00     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.99     KP        1.01     
!   LA        1.00     NL        0.99     OV        1.01     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.99     KP        1.00     
!   LA        0.99     NL        1.01     OV        1.00     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        1.01     
!   LA        0.97     NL        1.06     OV        0.99     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        1.01     
!   LA        0.99     NL        1.01     OV        0.98     PT        0.98     
!   SC        1.06     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.01     KP        0.99     
!   LA        1.00     NL        0.96     OV        0.99     PT        0.99     
!   SC        1.07     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.98     KP        1.00     
!   LA        1.01     NL        1.00     OV        0.99     PT        1.00     
!   SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.04     KP        1.02     
!   LA        1.03     NL        1.02     OV        1.01     PT        1.03     
!   SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.05     KP        1.00     
!   LA        1.04     NL        1.00     OV        1.00     PT        1.02     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.061471Jy  sigma=1.370240
! Fit after  self-cal, rms=0.061671Jy  sigma=1.363454
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.194 mas, bmaj=2.573 mas, bpa=17.58 degrees
! Estimated noise=0.281617 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115741 Jy
! Component: 100  -  total flux cleaned = 0.000112455 Jy
! Component: 150  -  total flux cleaned = 0.000160562 Jy
! Component: 200  -  total flux cleaned = 0.000138818 Jy
! Total flux subtracted in 200 components = 0.000138818 Jy
! Clean residual min=-0.001907 max=0.001934 Jy/beam
! Clean residual mean=-0.000000 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.258886 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 98 components and 0.258886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061649Jy  sigma=1.362952
! Fit after  self-cal, rms=0.061656Jy  sigma=1.362883
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061656Jy  sigma=1.362883
! Fit after  self-cal, rms=0.061496Jy  sigma=1.358415
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.196 mas, bmaj=2.575 mas, bpa=17.53 degrees
! Estimated noise=0.28158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000300614 Jy
! Component: 100  -  total flux cleaned = -0.000557849 Jy
! Component: 150  -  total flux cleaned = -0.000736214 Jy
! Component: 200  -  total flux cleaned = -0.000873932 Jy
! Total flux subtracted in 200 components = -0.000873932 Jy
! Clean residual min=-0.001579 max=0.001848 Jy/beam
! Clean residual mean=0.000001 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.258012 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 116 components and 0.258012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061481Jy  sigma=1.358051
! Fit after  self-cal, rms=0.061481Jy  sigma=1.358010
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (14.4, 31.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110006 Jy
! Component: 100  -  total flux cleaned = 0.0012177 Jy
! Component: 150  -  total flux cleaned = 0.00124544 Jy
! Component: 200  -  total flux cleaned = 0.00129525 Jy
! Total flux subtracted in 200 components = 0.00129525 Jy
! Clean residual min=-0.001488 max=0.001503 Jy/beam
! Clean residual mean=0.000001 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.259308 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 131 components and 0.259307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061430Jy  sigma=1.356797
! Fit after  self-cal, rms=0.061429Jy  sigma=1.356734
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061429Jy  sigma=1.356734
! Fit after  self-cal, rms=0.061425Jy  sigma=1.356674
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.196 mas, bmaj=2.576 mas, bpa=17.53 degrees
! Estimated noise=0.281456 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000236646 Jy
! Component: 100  -  total flux cleaned = 7.83727e-05 Jy
! Component: 150  -  total flux cleaned = 5.71519e-05 Jy
! Component: 200  -  total flux cleaned = -2.04649e-05 Jy
! Total flux subtracted in 200 components = -2.04649e-05 Jy
! Clean residual min=-0.001442 max=0.001457 Jy/beam
! Clean residual mean=0.000001 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.259287 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 143 components and 0.259287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061410Jy  sigma=1.356345
! Fit after  self-cal, rms=0.061410Jy  sigma=1.356338
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.75303e-06 Jy
! Component: 100  -  total flux cleaned = -6.8099e-05 Jy
! Component: 150  -  total flux cleaned = -0.000136388 Jy
! Component: 200  -  total flux cleaned = -0.000201992 Jy
! Total flux subtracted in 200 components = -0.000201992 Jy
! Clean residual min=-0.001436 max=0.001407 Jy/beam
! Clean residual mean=0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.259085 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 149 components and 0.259085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061400Jy  sigma=1.356143
! Fit after  self-cal, rms=0.061400Jy  sigma=1.356140
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061400Jy  sigma=1.356140
! Fit after  self-cal, rms=0.061389Jy  sigma=1.356120
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.259 mas, bmaj=3.115 mas, bpa=3.519 degrees
! Estimated noise=0.321866 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000258457 Jy
! Component: 100  -  total flux cleaned = -0.000450019 Jy
! Component: 150  -  total flux cleaned = -0.000556657 Jy
! Component: 200  -  total flux cleaned = -0.000598658 Jy
! Total flux subtracted in 200 components = -0.000598658 Jy
! Clean residual min=-0.001603 max=0.001306 Jy/beam
! Clean residual mean=0.000002 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.258486 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 162 components and 0.258486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061387Jy  sigma=1.356016
! Fit after  self-cal, rms=0.061386Jy  sigma=1.356005
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.94966e-05 Jy
! Component: 100  -  total flux cleaned = -0.000124848 Jy
! Component: 150  -  total flux cleaned = -0.000161475 Jy
! Component: 200  -  total flux cleaned = -0.000195831 Jy
! Total flux subtracted in 200 components = -0.000195831 Jy
! Clean residual min=-0.001594 max=0.001270 Jy/beam
! Clean residual mean=0.000002 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.258291 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 168 components and 0.258291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061384Jy  sigma=1.355946
! Fit after  self-cal, rms=0.061384Jy  sigma=1.355942
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.196 mas, bmaj=2.576 mas, bpa=17.52 degrees
! Estimated noise=0.281354 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.196 x 2.576 at 17.52 degrees (North through East)
! Clean map  min=-0.0013884  max=0.19949 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.927 mas, bmaj=2.416 mas, bpa=20.54 degrees
! Estimated noise=0.500382 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150006 Jy
! Component: 100  -  total flux cleaned = 0.188498 Jy
! Component: 150  -  total flux cleaned = 0.210325 Jy
! Component: 200  -  total flux cleaned = 0.224445 Jy
! Total flux subtracted in 200 components = 0.224445 Jy
! Clean residual min=-0.003845 max=0.007508 Jy/beam
! Clean residual mean=-0.000004 rms=0.001176 Jy/beam
! Combined flux in latest and established models = 0.224445 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.224445 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.196 mas, bmaj=2.576 mas, bpa=17.52 degrees
! Estimated noise=0.281354 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126397 Jy
! Component: 100  -  total flux cleaned = 0.0195546 Jy
! Component: 150  -  total flux cleaned = 0.0238716 Jy
! Component: 200  -  total flux cleaned = 0.0267857 Jy
! Total flux subtracted in 200 components = 0.0267857 Jy
! Clean residual min=-0.001994 max=0.001971 Jy/beam
! Clean residual mean=-0.000000 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.251231 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 43 components and 0.251231 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.259 mas, bmaj=3.115 mas, bpa=3.519 degrees
! Estimated noise=0.321866 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270038 Jy
! Component: 100  -  total flux cleaned = 0.00412973 Jy
! Component: 150  -  total flux cleaned = 0.00502128 Jy
! Component: 200  -  total flux cleaned = 0.0057396 Jy
! Total flux subtracted in 200 components = 0.0057396 Jy
! Clean residual min=-0.001803 max=0.001537 Jy/beam
! Clean residual mean=0.000002 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.25697 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00037583 Jy
! Component: 100  -  total flux cleaned = 0.000601457 Jy
! Component: 150  -  total flux cleaned = 0.000772932 Jy
! Component: 200  -  total flux cleaned = 0.000902015 Jy
! Total flux subtracted in 200 components = 0.000902015 Jy
! Clean residual min=-0.001718 max=0.001339 Jy/beam
! Clean residual mean=0.000002 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.257873 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 100 components and 0.257873 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.196 mas, bmaj=2.576 mas, bpa=17.52 degrees
! Estimated noise=0.281354 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000347588 Jy
! Component: 100  -  total flux cleaned = 0.000490962 Jy
! Component: 150  -  total flux cleaned = 0.000582364 Jy
! Component: 200  -  total flux cleaned = 0.000610681 Jy
! Total flux subtracted in 200 components = 0.000610681 Jy
! Clean residual min=-0.001556 max=0.001479 Jy/beam
! Clean residual mean=0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.258483 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 121 components and 0.258483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061430Jy  sigma=1.356798
! Fit after  self-cal, rms=0.061423Jy  sigma=1.356731
wmodel /J0037+0808_X_map.mod
! wmodel: Unable to open new model file: /J0037+0808_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0037+0808_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.196 x 2.576 at 17.52 degrees (North through East)
! Clean map  min=-0.0014544  max=0.19968 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0037+0808_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.199683 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0003563 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.535297 0.535297 1.07059 2.14119 4.28238 8.56476 17.1295 34.259 68.5181
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.199 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  560.436 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0037+0808_X_dfm.log closed on Thu May 19 18:16:39 2016