! Started logfile: /scr/pima/bg219e_uvs/J0030+7037_X_dfm.log on Thu May 19 18:16:28 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0030+7037_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0030+7037_X_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.869048 visibilities/baseline/integration-bin.
! Found source: J0030+7037
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10512 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0030+7037_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.093128Jy  sigma=23.327674
! Fit after  self-cal, rms=0.585832Jy  sigma=12.384786
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9114 mas, bmaj=1.794 mas, bpa=63.62 degrees
! Estimated noise=0.621496 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.314221 Jy
! Component: 100  -  total flux cleaned = 0.401109 Jy
! Total flux subtracted in 100 components = 0.401109 Jy
! Clean residual min=-0.014719 max=0.037573 Jy/beam
! Clean residual mean=0.000055 rms=0.004028 Jy/beam
! Combined flux in latest and established models = 0.401108 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.401108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098018Jy  sigma=2.020013
! Fit after  self-cal, rms=0.097619Jy  sigma=2.014204
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0434552 Jy
! Component: 100  -  total flux cleaned = 0.0661695 Jy
! Total flux subtracted in 100 components = 0.0661695 Jy
! Clean residual min=-0.006979 max=0.010909 Jy/beam
! Clean residual mean=0.000009 rms=0.001812 Jy/beam
! Combined flux in latest and established models = 0.467278 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 0.467278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071795Jy  sigma=1.459863
! Fit after  self-cal, rms=0.071194Jy  sigma=1.449787
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142767 Jy
! Component: 100  -  total flux cleaned = 0.0221063 Jy
! Total flux subtracted in 100 components = 0.0221063 Jy
! Clean residual min=-0.005039 max=0.006366 Jy/beam
! Clean residual mean=-0.000007 rms=0.001300 Jy/beam
! Combined flux in latest and established models = 0.489384 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.489384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066993Jy  sigma=1.361341
! Fit after  self-cal, rms=0.066904Jy  sigma=1.359972
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.143 mas, bmaj=2.127 mas, bpa=62.8 degrees
! Estimated noise=0.361785 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112578 Jy
! Component: 100  -  total flux cleaned = 0.0189869 Jy
! Component: 150  -  total flux cleaned = 0.0247681 Jy
! Component: 200  -  total flux cleaned = 0.0292047 Jy
! Total flux subtracted in 200 components = 0.0292047 Jy
! Clean residual min=-0.003905 max=0.004527 Jy/beam
! Clean residual mean=-0.000010 rms=0.001065 Jy/beam
! Combined flux in latest and established models = 0.518589 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 55 components and 0.518589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064334Jy  sigma=1.308240
! Fit after  self-cal, rms=0.064211Jy  sigma=1.305929
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.143 x 2.127 at 62.8 degrees (North through East)
! Clean map  min=-0.0036648  max=0.42032 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.04     KP        0.98     
!   LA        0.99     NL        1.01     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.97     NL        1.01     OV        1.00     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.03     KP        0.98     
!   LA        0.98     NL        1.00     OV        0.99     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        0.97     
!   LA        0.99     NL        1.01     OV        0.99     PT        0.98     
!   SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.98     NL        1.01     OV        1.00     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.01     KP        0.97     
!   LA        0.98     NL        1.00     OV        1.00     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.03     KP        0.98     
!   LA        0.99     NL        1.02     OV        0.98     PT        1.02     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.02     KP        0.98     
!   LA        0.99     NL        1.00     OV        0.98     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.04     KP        0.98     
!   LA        0.98     NL        1.00     OV        0.99     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        0.97     
!   LA        0.99     NL        1.00     OV        0.99     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        0.99     
!   LA        0.98     NL        1.02     OV        0.99     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.99     NL        1.01     OV        1.00     PT        1.00     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.064211Jy  sigma=1.305929
! Fit after  self-cal, rms=0.063388Jy  sigma=1.289995
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=2.135 mas, bpa=62.79 degrees
! Estimated noise=0.360194 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167248 Jy
! Component: 100  -  total flux cleaned = 0.00192765 Jy
! Component: 150  -  total flux cleaned = 0.00200635 Jy
! Component: 200  -  total flux cleaned = 0.0020661 Jy
! Total flux subtracted in 200 components = 0.0020661 Jy
! Clean residual min=-0.002867 max=0.003406 Jy/beam
! Clean residual mean=-0.000015 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.520655 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 71 components and 0.520655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063210Jy  sigma=1.286044
! Fit after  self-cal, rms=0.063196Jy  sigma=1.285747
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063196Jy  sigma=1.285747
! Fit after  self-cal, rms=0.063045Jy  sigma=1.277129
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.148 mas, bmaj=2.142 mas, bpa=62.72 degrees
! Estimated noise=0.360335 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000201941 Jy
! Component: 100  -  total flux cleaned = 6.75454e-05 Jy
! Component: 150  -  total flux cleaned = 0.000192562 Jy
! Component: 200  -  total flux cleaned = 0.000335147 Jy
! Total flux subtracted in 200 components = 0.000335147 Jy
! Clean residual min=-0.002552 max=0.003404 Jy/beam
! Clean residual mean=-0.000002 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.52099 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 78 components and 0.52099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062960Jy  sigma=1.275430
! Fit after  self-cal, rms=0.062953Jy  sigma=1.275272
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.4, -4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00322431 Jy
! Component: 100  -  total flux cleaned = 0.00510228 Jy
! Component: 150  -  total flux cleaned = 0.0059635 Jy
! Component: 200  -  total flux cleaned = 0.00633667 Jy
! Total flux subtracted in 200 components = 0.00633667 Jy
! Clean residual min=-0.002167 max=0.002479 Jy/beam
! Clean residual mean=-0.000005 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.527327 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 97 components and 0.527327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062770Jy  sigma=1.271232
! Fit after  self-cal, rms=0.062755Jy  sigma=1.270968
! Inverting map 
! Added new window around map position (1.6, 33.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218361 Jy
! Component: 100  -  total flux cleaned = 0.00262839 Jy
! Component: 150  -  total flux cleaned = 0.00301649 Jy
! Component: 200  -  total flux cleaned = 0.00336762 Jy
! Total flux subtracted in 200 components = 0.00336762 Jy
! Clean residual min=-0.002104 max=0.002014 Jy/beam
! Clean residual mean=-0.000007 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.530695 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 119 components and 0.530695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062663Jy  sigma=1.268896
! Fit after  self-cal, rms=0.062660Jy  sigma=1.268829
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062660Jy  sigma=1.268829
! Fit after  self-cal, rms=0.062686Jy  sigma=1.268394
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.148 mas, bmaj=2.144 mas, bpa=62.7 degrees
! Estimated noise=0.360025 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000287441 Jy
! Component: 100  -  total flux cleaned = 0.000326357 Jy
! Component: 150  -  total flux cleaned = 0.000360561 Jy
! Component: 200  -  total flux cleaned = 0.000390231 Jy
! Total flux subtracted in 200 components = 0.000390231 Jy
! Clean residual min=-0.002074 max=0.002020 Jy/beam
! Clean residual mean=-0.000008 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.531085 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 127 components and 0.531085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062647Jy  sigma=1.267521
! Fit after  self-cal, rms=0.062646Jy  sigma=1.267491
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000252265 Jy
! Component: 100  -  total flux cleaned = 0.000307425 Jy
! Component: 150  -  total flux cleaned = 0.000306889 Jy
! Component: 200  -  total flux cleaned = 0.000358553 Jy
! Total flux subtracted in 200 components = 0.000358553 Jy
! Clean residual min=-0.002090 max=0.002003 Jy/beam
! Clean residual mean=-0.000008 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.531443 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 134 components and 0.531443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062625Jy  sigma=1.267026
! Fit after  self-cal, rms=0.062623Jy  sigma=1.267014
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062623Jy  sigma=1.267014
! Fit after  self-cal, rms=0.062646Jy  sigma=1.266943
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.242 mas, bmaj=2.986 mas, bpa=76.2 degrees
! Estimated noise=0.425793 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015113 Jy
! Component: 100  -  total flux cleaned = 0.000150635 Jy
! Component: 150  -  total flux cleaned = 6.62998e-05 Jy
! Component: 200  -  total flux cleaned = 2.82266e-05 Jy
! Total flux subtracted in 200 components = 2.82266e-05 Jy
! Clean residual min=-0.002195 max=0.002216 Jy/beam
! Clean residual mean=-0.000015 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.531472 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 152 components and 0.531471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062636Jy  sigma=1.266674
! Fit after  self-cal, rms=0.062636Jy  sigma=1.266663
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16.6, -24.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102641 Jy
! Component: 100  -  total flux cleaned = 0.00109278 Jy
! Component: 150  -  total flux cleaned = 0.000874736 Jy
! Component: 200  -  total flux cleaned = 0.00068648 Jy
! Total flux subtracted in 200 components = 0.00068648 Jy
! Clean residual min=-0.001710 max=0.001961 Jy/beam
! Clean residual mean=-0.000012 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.532158 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 181 components and 0.532158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062569Jy  sigma=1.265287
! Fit after  self-cal, rms=0.062565Jy  sigma=1.265190
! Inverting map 
! Added new window around map position (11.4, 19.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011209 Jy
! Component: 100  -  total flux cleaned = 0.00146072 Jy
! Component: 150  -  total flux cleaned = 0.00172274 Jy
! Component: 200  -  total flux cleaned = 0.00193276 Jy
! Total flux subtracted in 200 components = 0.00193276 Jy
! Clean residual min=-0.001510 max=0.001360 Jy/beam
! Clean residual mean=-0.000014 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.534091 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 215 components and 0.534091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062528Jy  sigma=1.264282
! Fit after  self-cal, rms=0.062527Jy  sigma=1.264224
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=2.145 mas, bpa=62.68 degrees
! Estimated noise=0.359937 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.149 x 2.145 at 62.68 degrees (North through East)
! Clean map  min=-0.001486  max=0.41877 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9124 mas, bmaj=1.808 mas, bpa=63.41 degrees
! Estimated noise=0.623198 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.314648 Jy
! Component: 100  -  total flux cleaned = 0.403816 Jy
! Component: 150  -  total flux cleaned = 0.446027 Jy
! Component: 200  -  total flux cleaned = 0.468233 Jy
! Total flux subtracted in 200 components = 0.468233 Jy
! Clean residual min=-0.005572 max=0.010718 Jy/beam
! Clean residual mean=0.000011 rms=0.001548 Jy/beam
! Combined flux in latest and established models = 0.468233 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.468233 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=2.145 mas, bpa=62.68 degrees
! Estimated noise=0.359937 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015825 Jy
! Component: 100  -  total flux cleaned = 0.0255858 Jy
! Component: 150  -  total flux cleaned = 0.0326183 Jy
! Component: 200  -  total flux cleaned = 0.0379136 Jy
! Total flux subtracted in 200 components = 0.0379136 Jy
! Clean residual min=-0.002812 max=0.003395 Jy/beam
! Clean residual mean=0.000003 rms=0.000830 Jy/beam
! Combined flux in latest and established models = 0.506146 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 56 components and 0.506146 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.242 mas, bmaj=2.986 mas, bpa=76.2 degrees
! Estimated noise=0.425793 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00630897 Jy
! Component: 100  -  total flux cleaned = 0.0106558 Jy
! Component: 150  -  total flux cleaned = 0.014008 Jy
! Component: 200  -  total flux cleaned = 0.0161787 Jy
! Total flux subtracted in 200 components = 0.0161787 Jy
! Clean residual min=-0.002453 max=0.002588 Jy/beam
! Clean residual mean=-0.000004 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.522325 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193262 Jy
! Component: 100  -  total flux cleaned = 0.00344288 Jy
! Component: 150  -  total flux cleaned = 0.00483297 Jy
! Component: 200  -  total flux cleaned = 0.00604722 Jy
! Total flux subtracted in 200 components = 0.00604722 Jy
! Clean residual min=-0.001999 max=0.001891 Jy/beam
! Clean residual mean=-0.000008 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.528372 Jy
! Adding 109 model components to the UV plane model.
! The established model now contains 151 components and 0.528372 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=2.145 mas, bpa=62.68 degrees
! Estimated noise=0.359937 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188408 Jy
! Component: 100  -  total flux cleaned = 0.00282287 Jy
! Component: 150  -  total flux cleaned = 0.003247 Jy
! Component: 200  -  total flux cleaned = 0.00347524 Jy
! Total flux subtracted in 200 components = 0.00347524 Jy
! Clean residual min=-0.002061 max=0.001939 Jy/beam
! Clean residual mean=-0.000007 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.531847 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 183 components and 0.531847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062669Jy  sigma=1.266975
! Fit after  self-cal, rms=0.062658Jy  sigma=1.266781
wmodel /J0030+7037_X_map.mod
! wmodel: Unable to open new model file: /J0030+7037_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0030+7037_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.149 x 2.145 at 62.68 degrees (North through East)
! Clean map  min=-0.0018811  max=0.42001 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0030+7037_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.420009 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000441963 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.315682 0.315682 0.631363 1.26273 2.52545 5.0509 10.1018 20.2036 40.4072 80.8145
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.42 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  950.324 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0030+7037_X_dfm.log closed on Thu May 19 18:16:31 2016