! Started logfile: /scr/pima/bg219e_uvs/J0029+0509_X_dfm.log on Thu May 19 18:16:19 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0029+0509_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0029+0509_X_uva.fits
! AN table 1: 52 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.844017 visibilities/baseline/integration-bin.
! Found source: J0029+0509
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18960 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0029+0509_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005772Jy  sigma=24.371134
! Fit after  self-cal, rms=0.908462Jy  sigma=21.927687
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9252 mas, bmaj=2.438 mas, bpa=20.63 degrees
! Estimated noise=0.394341 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0637775 Jy
! Component: 100  -  total flux cleaned = 0.0917952 Jy
! Total flux subtracted in 100 components = 0.0917952 Jy
! Clean residual min=-0.006403 max=0.014124 Jy/beam
! Clean residual mean=-0.000002 rms=0.002078 Jy/beam
! Combined flux in latest and established models = 0.0917952 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0917952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071077Jy  sigma=1.658932
! Fit after  self-cal, rms=0.070436Jy  sigma=1.644584
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175418 Jy
! Component: 100  -  total flux cleaned = 0.0280754 Jy
! Total flux subtracted in 100 components = 0.0280754 Jy
! Clean residual min=-0.005174 max=0.010052 Jy/beam
! Clean residual mean=0.000000 rms=0.001400 Jy/beam
! Combined flux in latest and established models = 0.119871 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.119871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063857Jy  sigma=1.471893
! Fit after  self-cal, rms=0.063695Jy  sigma=1.467894
! Inverting map 
! Added new window around map position (-1.8, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101491 Jy
! Component: 100  -  total flux cleaned = 0.0163567 Jy
! Total flux subtracted in 100 components = 0.0163567 Jy
! Clean residual min=-0.004097 max=0.004460 Jy/beam
! Clean residual mean=0.000002 rms=0.001066 Jy/beam
! Combined flux in latest and established models = 0.136227 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 38 components and 0.136227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061563Jy  sigma=1.412177
! Fit after  self-cal, rms=0.061443Jy  sigma=1.409380
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.215 mas, bmaj=2.614 mas, bpa=17.55 degrees
! Estimated noise=0.227211 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00718962 Jy
! Component: 100  -  total flux cleaned = 0.0115109 Jy
! Component: 150  -  total flux cleaned = 0.0144652 Jy
! Component: 200  -  total flux cleaned = 0.0165641 Jy
! Total flux subtracted in 200 components = 0.0165641 Jy
! Clean residual min=-0.003848 max=0.004825 Jy/beam
! Clean residual mean=0.000004 rms=0.001110 Jy/beam
! Combined flux in latest and established models = 0.152791 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 62 components and 0.152791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060506Jy  sigma=1.386118
! Fit after  self-cal, rms=0.060468Jy  sigma=1.385164
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.215 x 2.614 at 17.55 degrees (North through East)
! Clean map  min=-0.0036774  max=0.082276 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.05     KP        0.97     
!   LA        1.01     NL        0.99     OV        0.99     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.09     KP        0.97     
!   LA        1.02     NL        1.03     OV        0.99     PT        0.99     
!   SC        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        0.98     KP        0.95     
!   LA        0.97     NL        1.05     OV        0.98     PT        0.97     
!   SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.98     
!   LA        0.99     NL        1.07     OV        0.99     PT        0.95     
!   SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.01     KP        0.92     
!   LA        1.05     NL        1.02     OV        0.98     PT        0.98     
!   SC        1.07     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.98     KP        0.95     
!   LA        1.04     NL        0.97     OV        1.00     PT        0.96     
!   SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.93     HN        0.98     KP        0.95     
!   LA        1.05     NL        1.02     OV        0.97     PT        1.01     
!   SC        0.91     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.95     HN        0.99     KP        0.97     
!   LA        1.07     NL        0.97     OV        1.02     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        1.08     KP        0.95     
!   LA        1.10     NL        1.00     OV        1.04     PT        0.95     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.13     KP        0.93     
!   LA        1.14     NL        1.01     OV        1.04     PT        0.95     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.92     HN        1.03     KP        0.96     
!   LA        1.08     NL        0.98     OV        1.00     PT        0.97     
!   SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        0.97     KP        0.97     
!   LA        1.06     NL        1.00     OV        1.07     PT        1.00     
!   SC        0.95     
! 
! 
! Fit before self-cal, rms=0.060468Jy  sigma=1.385164
! Fit after  self-cal, rms=0.059696Jy  sigma=1.378137
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.213 mas, bmaj=2.619 mas, bpa=17.92 degrees
! Estimated noise=0.224713 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122891 Jy
! Component: 100  -  total flux cleaned = 0.00136852 Jy
! Component: 150  -  total flux cleaned = 0.0014858 Jy
! Component: 200  -  total flux cleaned = 0.00159111 Jy
! Total flux subtracted in 200 components = 0.00159111 Jy
! Clean residual min=-0.003382 max=0.004495 Jy/beam
! Clean residual mean=0.000002 rms=0.001040 Jy/beam
! Combined flux in latest and established models = 0.154383 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 74 components and 0.154383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059652Jy  sigma=1.377159
! Fit after  self-cal, rms=0.059646Jy  sigma=1.376912
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059646Jy  sigma=1.376912
! Fit after  self-cal, rms=0.059571Jy  sigma=1.367750
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.221 mas, bmaj=2.62 mas, bpa=17.49 degrees
! Estimated noise=0.224362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000807903 Jy
! Component: 100  -  total flux cleaned = -0.00105986 Jy
! Component: 150  -  total flux cleaned = -0.00103912 Jy
! Component: 200  -  total flux cleaned = -0.00100027 Jy
! Total flux subtracted in 200 components = -0.00100027 Jy
! Clean residual min=-0.002850 max=0.003835 Jy/beam
! Clean residual mean=0.000001 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.153382 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 85 components and 0.153382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059543Jy  sigma=1.367128
! Fit after  self-cal, rms=0.059562Jy  sigma=1.366848
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.2, -8.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362216 Jy
! Component: 100  -  total flux cleaned = 0.00576246 Jy
! Component: 150  -  total flux cleaned = 0.00725192 Jy
! Component: 200  -  total flux cleaned = 0.00815712 Jy
! Total flux subtracted in 200 components = 0.00815712 Jy
! Clean residual min=-0.002903 max=0.003610 Jy/beam
! Clean residual mean=0.000003 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 0.161539 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 114 components and 0.161539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059304Jy  sigma=1.360899
! Fit after  self-cal, rms=0.059275Jy  sigma=1.360342
! Inverting map 
! Added new window around map position (-25.6, 44.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00332884 Jy
! Component: 100  -  total flux cleaned = 0.00528844 Jy
! Component: 150  -  total flux cleaned = 0.00679823 Jy
! Component: 200  -  total flux cleaned = 0.00803909 Jy
! Total flux subtracted in 200 components = 0.00803909 Jy
! Clean residual min=-0.002677 max=0.002925 Jy/beam
! Clean residual mean=0.000001 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.169578 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 156 components and 0.169578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059066Jy  sigma=1.354375
! Fit after  self-cal, rms=0.059044Jy  sigma=1.353798
! Inverting map 
! Added new window around map position (-11.6, 41.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00291423 Jy
! Component: 100  -  total flux cleaned = 0.0045852 Jy
! Component: 150  -  total flux cleaned = 0.00562818 Jy
! Component: 200  -  total flux cleaned = 0.00661545 Jy
! Total flux subtracted in 200 components = 0.00661545 Jy
! Clean residual min=-0.002307 max=0.002502 Jy/beam
! Clean residual mean=0.000001 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.176194 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 185 components and 0.176194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058874Jy  sigma=1.349326
! Fit after  self-cal, rms=0.058859Jy  sigma=1.348958
! Inverting map 
! Added new window around map position (-30.6, 14.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153155 Jy
! Component: 100  -  total flux cleaned = 0.00243332 Jy
! Component: 150  -  total flux cleaned = 0.00311184 Jy
! Component: 200  -  total flux cleaned = 0.00350452 Jy
! Total flux subtracted in 200 components = 0.00350452 Jy
! Clean residual min=-0.002240 max=0.002119 Jy/beam
! Clean residual mean=0.000001 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.179698 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 221 components and 0.179699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058742Jy  sigma=1.345738
! Fit after  self-cal, rms=0.058729Jy  sigma=1.345485
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058729Jy  sigma=1.345485
! Fit after  self-cal, rms=0.058544Jy  sigma=1.344312
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.223 mas, bmaj=2.626 mas, bpa=17.56 degrees
! Estimated noise=0.223146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000864727 Jy
! Component: 100  -  total flux cleaned = 0.00144581 Jy
! Component: 150  -  total flux cleaned = 0.00188397 Jy
! Component: 200  -  total flux cleaned = 0.0022449 Jy
! Total flux subtracted in 200 components = 0.0022449 Jy
! Clean residual min=-0.002095 max=0.002023 Jy/beam
! Clean residual mean=0.000002 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.181943 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 237 components and 0.181944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058488Jy  sigma=1.342884
! Fit after  self-cal, rms=0.058492Jy  sigma=1.342755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000639559 Jy
! Component: 100  -  total flux cleaned = 0.000975687 Jy
! Component: 150  -  total flux cleaned = 0.00128938 Jy
! Component: 200  -  total flux cleaned = 0.00158561 Jy
! Total flux subtracted in 200 components = 0.00158561 Jy
! Clean residual min=-0.002001 max=0.001983 Jy/beam
! Clean residual mean=0.000002 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.183529 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 250 components and 0.183529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058459Jy  sigma=1.341981
! Fit after  self-cal, rms=0.058457Jy  sigma=1.341948
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058457Jy  sigma=1.341948
! Fit after  self-cal, rms=0.058575Jy  sigma=1.341692
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.363 mas, bmaj=3.315 mas, bpa=2.853 degrees
! Estimated noise=0.251074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105208 Jy
! Component: 100  -  total flux cleaned = 0.00166634 Jy
! Component: 150  -  total flux cleaned = 0.00210458 Jy
! Component: 200  -  total flux cleaned = 0.00249662 Jy
! Total flux subtracted in 200 components = 0.00249662 Jy
! Clean residual min=-0.002064 max=0.002397 Jy/beam
! Clean residual mean=0.000003 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.186026 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 282 components and 0.186026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058555Jy  sigma=1.341014
! Fit after  self-cal, rms=0.058554Jy  sigma=1.340953
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-43.6, -32.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163581 Jy
! Component: 100  -  total flux cleaned = 0.00221216 Jy
! Component: 150  -  total flux cleaned = 0.00264872 Jy
! Component: 200  -  total flux cleaned = 0.00292045 Jy
! Total flux subtracted in 200 components = 0.00292045 Jy
! Clean residual min=-0.001758 max=0.001976 Jy/beam
! Clean residual mean=0.000003 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.188946 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 316 components and 0.188946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058475Jy  sigma=1.338961
! Fit after  self-cal, rms=0.058466Jy  sigma=1.338784
! Inverting map 
! Added new window around map position (-31.8, -7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00148004 Jy
! Component: 100  -  total flux cleaned = 0.00184145 Jy
! Component: 150  -  total flux cleaned = 0.00238346 Jy
! Component: 200  -  total flux cleaned = 0.00287322 Jy
! Total flux subtracted in 200 components = 0.00287322 Jy
! Clean residual min=-0.001490 max=0.001425 Jy/beam
! Clean residual mean=0.000002 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.191819 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 356 components and 0.191819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058415Jy  sigma=1.337265
! Fit after  self-cal, rms=0.058411Jy  sigma=1.337175
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.224 mas, bmaj=2.628 mas, bpa=17.59 degrees
! Estimated noise=0.223365 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.224 x 2.628 at 17.59 degrees (North through East)
! Clean map  min=-0.0021376  max=0.080787 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9311 mas, bmaj=2.447 mas, bpa=20.63 degrees
! Estimated noise=0.390764 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.063577 Jy
! Component: 100  -  total flux cleaned = 0.0922013 Jy
! Component: 150  -  total flux cleaned = 0.109454 Jy
! Component: 200  -  total flux cleaned = 0.1207 Jy
! Total flux subtracted in 200 components = 0.1207 Jy
! Clean residual min=-0.004440 max=0.006327 Jy/beam
! Clean residual mean=-0.000002 rms=0.001226 Jy/beam
! Combined flux in latest and established models = 0.1207 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.1207 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.224 mas, bmaj=2.628 mas, bpa=17.59 degrees
! Estimated noise=0.223365 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115035 Jy
! Component: 100  -  total flux cleaned = 0.0185508 Jy
! Component: 150  -  total flux cleaned = 0.0239718 Jy
! Component: 200  -  total flux cleaned = 0.0286082 Jy
! Total flux subtracted in 200 components = 0.0286082 Jy
! Clean residual min=-0.003047 max=0.003681 Jy/beam
! Clean residual mean=-0.000001 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 0.149308 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 72 components and 0.149308 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.363 mas, bmaj=3.315 mas, bpa=2.853 degrees
! Estimated noise=0.251074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00577907 Jy
! Component: 100  -  total flux cleaned = 0.0104868 Jy
! Component: 150  -  total flux cleaned = 0.0144896 Jy
! Component: 200  -  total flux cleaned = 0.0179692 Jy
! Total flux subtracted in 200 components = 0.0179692 Jy
! Clean residual min=-0.002869 max=0.003452 Jy/beam
! Clean residual mean=0.000000 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.167278 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257016 Jy
! Component: 100  -  total flux cleaned = 0.00485777 Jy
! Component: 150  -  total flux cleaned = 0.00661715 Jy
! Component: 200  -  total flux cleaned = 0.0081179 Jy
! Total flux subtracted in 200 components = 0.0081179 Jy
! Clean residual min=-0.002307 max=0.002512 Jy/beam
! Clean residual mean=0.000001 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.175395 Jy
! Adding 130 model components to the UV plane model.
! The established model now contains 187 components and 0.175395 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.224 mas, bmaj=2.628 mas, bpa=17.59 degrees
! Estimated noise=0.223365 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177356 Jy
! Component: 100  -  total flux cleaned = 0.00312426 Jy
! Component: 150  -  total flux cleaned = 0.00435565 Jy
! Component: 200  -  total flux cleaned = 0.00524203 Jy
! Total flux subtracted in 200 components = 0.00524203 Jy
! Clean residual min=-0.001921 max=0.002135 Jy/beam
! Clean residual mean=0.000001 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.180637 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 222 components and 0.180637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058700Jy  sigma=1.343566
! Fit after  self-cal, rms=0.058645Jy  sigma=1.342244
wmodel /J0029+0509_X_map.mod
! wmodel: Unable to open new model file: /J0029+0509_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0029+0509_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.224 x 2.628 at 17.59 degrees (North through East)
! Clean map  min=-0.0020289  max=0.079948 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0029+0509_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0799481 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000443036 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.66247 1.66247 3.32493 6.64986 13.2997 26.5994 53.1989
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.079 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  180.454 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0029+0509_X_dfm.log closed on Thu May 19 18:16:23 2016