! Started logfile: /scr/pima/bg219e_uvs/J0026-3512_S_dfm.log on Thu May 19 18:15:57 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219e_uvs/J0026-3512_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J0026-3512_S_uva.fits ! AN table 1: 61 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.68911 visibilities/baseline/integration-bin. ! Found source: J0026-3512 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 4708 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0026-3512_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008656Jy sigma=16.834156 ! Fit after self-cal, rms=0.942998Jy sigma=15.757666 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.896 mas, bmaj=14.66 mas, bpa=20.41 degrees ! Estimated noise=1.01685 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0466313 Jy ! Component: 100 - total flux cleaned = 0.0570888 Jy ! Total flux subtracted in 100 components = 0.0570888 Jy ! Clean residual min=-0.005442 max=0.004857 Jy/beam ! Clean residual mean=-0.000015 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.0570888 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0570888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080618Jy sigma=1.293546 ! Fit after self-cal, rms=0.079217Jy sigma=1.269069 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.982 mas, bmaj=18.11 mas, bpa=18.87 degrees ! Estimated noise=0.672915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050073 Jy ! Component: 100 - total flux cleaned = 0.00627703 Jy ! Component: 150 - total flux cleaned = 0.00651573 Jy ! Component: 200 - total flux cleaned = 0.00667058 Jy ! Total flux subtracted in 200 components = 0.00667058 Jy ! Clean residual min=-0.003256 max=0.003345 Jy/beam ! Clean residual mean=-0.000018 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.0637593 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.0637593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078963Jy sigma=1.263786 ! Fit after self-cal, rms=0.078964Jy sigma=1.263754 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.982 x 18.11 at 18.87 degrees (North through East) ! Clean map min=-0.0032207 max=0.0609 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.08 KP 1.04 LA 1.02 ! NL 0.93 OV 1.08 PT 0.87 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 KP 1.07 LA 0.89 ! NL 1.17 OV 1.04 PT 1.08 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.94 KP 1.03 LA 1.00 ! NL 1.04 OV 1.08 PT 0.92 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 KP 1.05 LA 1.06 ! NL 0.90 OV 1.00 PT 0.98 SC 1.02 ! ! ! Fit before self-cal, rms=0.078964Jy sigma=1.263754 ! Fit after self-cal, rms=0.078609Jy sigma=1.259830 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.955 mas, bmaj=18.12 mas, bpa=19.06 degrees ! Estimated noise=0.665852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134277 Jy ! Component: 100 - total flux cleaned = -8.8656e-05 Jy ! Component: 150 - total flux cleaned = -5.07203e-05 Jy ! Component: 200 - total flux cleaned = 1.68017e-05 Jy ! Total flux subtracted in 200 components = 1.68017e-05 Jy ! Clean residual min=-0.002972 max=0.003627 Jy/beam ! Clean residual mean=-0.000009 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.0637761 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.0637762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078595Jy sigma=1.259673 ! Fit after self-cal, rms=0.078773Jy sigma=1.258741 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078773Jy sigma=1.258741 ! Fit after self-cal, rms=0.079440Jy sigma=1.257125 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.956 mas, bmaj=18.16 mas, bpa=19.14 degrees ! Estimated noise=0.665788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.46089e-05 Jy ! Component: 100 - total flux cleaned = -4.62986e-05 Jy ! Component: 150 - total flux cleaned = -1.48834e-05 Jy ! Component: 200 - total flux cleaned = 1.29501e-05 Jy ! Total flux subtracted in 200 components = 1.29501e-05 Jy ! Clean residual min=-0.002892 max=0.003359 Jy/beam ! Clean residual mean=-0.000005 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.0637891 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.0637891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079430Jy sigma=1.257019 ! Fit after self-cal, rms=0.079525Jy sigma=1.256758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19, 97.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205392 Jy ! Component: 100 - total flux cleaned = 0.00205263 Jy ! Component: 150 - total flux cleaned = 0.00209997 Jy ! Component: 200 - total flux cleaned = 0.00214047 Jy ! Total flux subtracted in 200 components = 0.00214047 Jy ! Clean residual min=-0.002228 max=0.002525 Jy/beam ! Clean residual mean=-0.000006 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0659296 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 81 components and 0.0659296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079407Jy sigma=1.254903 ! Fit after self-cal, rms=0.079358Jy sigma=1.254313 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079358Jy sigma=1.254313 ! Fit after self-cal, rms=0.079047Jy sigma=1.254002 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.959 mas, bmaj=18.18 mas, bpa=19.25 degrees ! Estimated noise=0.661011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124001 Jy ! Component: 100 - total flux cleaned = 0.00128843 Jy ! Component: 150 - total flux cleaned = 0.00125001 Jy ! Component: 200 - total flux cleaned = 0.00115567 Jy ! Total flux subtracted in 200 components = 0.00115567 Jy ! Clean residual min=-0.002051 max=0.002324 Jy/beam ! Clean residual mean=-0.000001 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0670853 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 92 components and 0.0670852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078990Jy sigma=1.253107 ! Fit after self-cal, rms=0.078998Jy sigma=1.252618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000381522 Jy ! Component: 100 - total flux cleaned = 0.00042305 Jy ! Component: 150 - total flux cleaned = 0.000457505 Jy ! Component: 200 - total flux cleaned = 0.000402966 Jy ! Total flux subtracted in 200 components = 0.000402966 Jy ! Clean residual min=-0.002018 max=0.002349 Jy/beam ! Clean residual mean=0.000003 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0674882 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 112 components and 0.0674882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078962Jy sigma=1.252139 ! Fit after self-cal, rms=0.078899Jy sigma=1.251324 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078899Jy sigma=1.251324 ! Fit after self-cal, rms=0.078474Jy sigma=1.251096 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.901 mas, bmaj=30.7 mas, bpa=6.685 degrees ! Estimated noise=0.73731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000904393 Jy ! Component: 100 - total flux cleaned = 0.000840484 Jy ! Component: 150 - total flux cleaned = 0.00079012 Jy ! Component: 200 - total flux cleaned = 0.000768957 Jy ! Total flux subtracted in 200 components = 0.000768957 Jy ! Clean residual min=-0.001984 max=0.002546 Jy/beam ! Clean residual mean=-0.000001 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.0682572 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 123 components and 0.0682572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078450Jy sigma=1.250758 ! Fit after self-cal, rms=0.078451Jy sigma=1.250608 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331074 Jy ! Component: 100 - total flux cleaned = 0.000306383 Jy ! Component: 150 - total flux cleaned = 0.000219216 Jy ! Component: 200 - total flux cleaned = 0.000218653 Jy ! Total flux subtracted in 200 components = 0.000218653 Jy ! Clean residual min=-0.002004 max=0.002582 Jy/beam ! Clean residual mean=0.000002 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.0684758 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 137 components and 0.0684758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078435Jy sigma=1.250438 ! Fit after self-cal, rms=0.078426Jy sigma=1.250375 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=18.22 mas, bpa=19.3 degrees ! Estimated noise=0.655903 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.968 x 18.22 at 19.3 degrees (North through East) ! Clean map min=-0.0027975 max=0.05922 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=14.71 mas, bpa=20.74 degrees ! Estimated noise=0.98539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473295 Jy ! Component: 100 - total flux cleaned = 0.0569084 Jy ! Component: 150 - total flux cleaned = 0.060128 Jy ! Component: 200 - total flux cleaned = 0.06234 Jy ! Total flux subtracted in 200 components = 0.06234 Jy ! Clean residual min=-0.004749 max=0.004391 Jy/beam ! Clean residual mean=-0.000008 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.06234 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.06234 Jy ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=18.22 mas, bpa=19.3 degrees ! Estimated noise=0.655903 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300548 Jy ! Component: 100 - total flux cleaned = 0.00368543 Jy ! Component: 150 - total flux cleaned = 0.0039279 Jy ! Component: 200 - total flux cleaned = 0.004208 Jy ! Total flux subtracted in 200 components = 0.004208 Jy ! Clean residual min=-0.002696 max=0.002494 Jy/beam ! Clean residual mean=-0.000006 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.066548 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 0.066548 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.901 mas, bmaj=30.7 mas, bpa=6.685 degrees ! Estimated noise=0.73731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109728 Jy ! Component: 100 - total flux cleaned = 0.00144087 Jy ! Component: 150 - total flux cleaned = 0.00160126 Jy ! Component: 200 - total flux cleaned = 0.00166891 Jy ! Total flux subtracted in 200 components = 0.00166891 Jy ! Clean residual min=-0.002350 max=0.002611 Jy/beam ! Clean residual mean=-0.000001 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.0682169 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.22241e-05 Jy ! Component: 100 - total flux cleaned = 0.000118153 Jy ! Component: 150 - total flux cleaned = 0.00016832 Jy ! Component: 200 - total flux cleaned = 0.000213272 Jy ! Total flux subtracted in 200 components = 0.000213272 Jy ! Clean residual min=-0.002107 max=0.002604 Jy/beam ! Clean residual mean=0.000001 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.0684301 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 72 components and 0.0684301 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=18.22 mas, bpa=19.3 degrees ! Estimated noise=0.655903 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232117 Jy ! Component: 100 - total flux cleaned = -0.000154372 Jy ! Component: 150 - total flux cleaned = -8.68126e-05 Jy ! Component: 200 - total flux cleaned = 4.1324e-06 Jy ! Total flux subtracted in 200 components = 4.1324e-06 Jy ! Clean residual min=-0.002062 max=0.002237 Jy/beam ! Clean residual mean=0.000000 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0684343 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.0684343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078424Jy sigma=1.250389 ! Fit after self-cal, rms=0.078416Jy sigma=1.250276 wmodel /J0026-3512_S_map.mod ! wmodel: Unable to open new model file: /J0026-3512_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219e_uvs/J0026-3512_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.968 x 18.22 at 19.3 degrees (North through East) ! Clean map min=-0.0034333 max=0.059213 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0026-3512_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0592128 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000628027 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.18188 3.18188 6.36376 12.7275 25.455 50.9101 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.059 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 94.283 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J0026-3512_S_dfm.log closed on Thu May 19 18:16:00 2016