! Started logfile: /scr/pima/bg219e_uvs/J0025-2227_X_dfm.log on Thu May 19 18:15:43 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0025-2227_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0025-2227_X_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.901235 visibilities/baseline/integration-bin.
! Found source: J0025-2227
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 14016 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0025-2227_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.033043Jy  sigma=22.043721
! Fit after  self-cal, rms=0.774745Jy  sigma=16.354997
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7721 mas, bmaj=3.548 mas, bpa=19.27 degrees
! Estimated noise=0.600595 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.172375 Jy
! Component: 100  -  total flux cleaned = 0.214826 Jy
! Total flux subtracted in 100 components = 0.214826 Jy
! Clean residual min=-0.007823 max=0.018251 Jy/beam
! Clean residual mean=-0.000016 rms=0.002257 Jy/beam
! Combined flux in latest and established models = 0.214826 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.214826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080178Jy  sigma=1.616602
! Fit after  self-cal, rms=0.080068Jy  sigma=1.614597
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0215345 Jy
! Component: 100  -  total flux cleaned = 0.0337659 Jy
! Total flux subtracted in 100 components = 0.0337659 Jy
! Clean residual min=-0.004156 max=0.006148 Jy/beam
! Clean residual mean=-0.000007 rms=0.001179 Jy/beam
! Combined flux in latest and established models = 0.248592 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.248592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072277Jy  sigma=1.417388
! Fit after  self-cal, rms=0.072117Jy  sigma=1.414171
! Inverting map 
! Added new window around map position (1.4, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0079194 Jy
! Component: 100  -  total flux cleaned = 0.0128577 Jy
! Total flux subtracted in 100 components = 0.0128577 Jy
! Clean residual min=-0.003450 max=0.003699 Jy/beam
! Clean residual mean=-0.000004 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.261449 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 29 components and 0.261449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070846Jy  sigma=1.381246
! Fit after  self-cal, rms=0.070830Jy  sigma=1.380794
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.05 mas, bmaj=3.848 mas, bpa=17.01 degrees
! Estimated noise=0.308022 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00578014 Jy
! Component: 100  -  total flux cleaned = 0.00921408 Jy
! Component: 150  -  total flux cleaned = 0.0115631 Jy
! Component: 200  -  total flux cleaned = 0.0129209 Jy
! Total flux subtracted in 200 components = 0.0129209 Jy
! Clean residual min=-0.002705 max=0.002520 Jy/beam
! Clean residual mean=-0.000004 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.27437 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 69 components and 0.27437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070344Jy  sigma=1.368424
! Fit after  self-cal, rms=0.070341Jy  sigma=1.368081
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.05 x 3.848 at 17.01 degrees (North through East)
! Clean map  min=-0.0027067  max=0.22937 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.07     KP        1.00     
!   LA        1.01     NL        0.98     OV        0.99     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.03     KP        0.99     
!   LA        1.00     NL        1.02     OV        1.01     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.05     KP        1.00     
!   LA        0.99     NL        0.99     OV        0.99     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.07     KP        1.02     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.07     KP        0.98     
!   LA        0.99     NL        0.99     OV        1.01     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.03     KP        1.00     
!   LA        1.00     NL        0.98     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.11     KP        1.00     
!   LA        1.00     NL        1.01     OV        1.01     PT        1.04     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.08     KP        1.01     
!   LA        1.00     NL        0.98     OV        1.00     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.06     KP        1.00     
!   LA        1.00     NL        0.99     OV        0.98     PT        1.00     
!   SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.04     KP        0.98     
!   LA        1.01     NL        0.97     OV        1.01     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.05     KP        1.00     
!   LA        1.00     NL        0.99     OV        0.96     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.07     KP        1.02     
!   LA        0.98     NL        0.98     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.070341Jy  sigma=1.368081
! Fit after  self-cal, rms=0.071301Jy  sigma=1.361195
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.053 mas, bmaj=3.879 mas, bpa=17.17 degrees
! Estimated noise=0.307767 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000615666 Jy
! Component: 100  -  total flux cleaned = -0.00097222 Jy
! Component: 150  -  total flux cleaned = -0.00121949 Jy
! Component: 200  -  total flux cleaned = -0.00132065 Jy
! Total flux subtracted in 200 components = -0.00132065 Jy
! Clean residual min=-0.002184 max=0.001972 Jy/beam
! Clean residual mean=-0.000001 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.273049 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 90 components and 0.273049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071233Jy  sigma=1.359971
! Fit after  self-cal, rms=0.071254Jy  sigma=1.359862
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071254Jy  sigma=1.359862
! Fit after  self-cal, rms=0.071476Jy  sigma=1.358127
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.054 mas, bmaj=3.885 mas, bpa=17.21 degrees
! Estimated noise=0.307577 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000855575 Jy
! Component: 100  -  total flux cleaned = -0.000962482 Jy
! Component: 150  -  total flux cleaned = -0.000993564 Jy
! Component: 200  -  total flux cleaned = -0.000993817 Jy
! Total flux subtracted in 200 components = -0.000993817 Jy
! Clean residual min=-0.002046 max=0.001904 Jy/beam
! Clean residual mean=-0.000001 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.272056 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 100 components and 0.272056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071438Jy  sigma=1.357482
! Fit after  self-cal, rms=0.071437Jy  sigma=1.357453
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120575 Jy
! Component: 100  -  total flux cleaned = 0.000144895 Jy
! Component: 150  -  total flux cleaned = 0.000166704 Jy
! Component: 200  -  total flux cleaned = 0.000166855 Jy
! Total flux subtracted in 200 components = 0.000166855 Jy
! Clean residual min=-0.002007 max=0.001901 Jy/beam
! Clean residual mean=-0.000001 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.272222 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 108 components and 0.272222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071423Jy  sigma=1.357179
! Fit after  self-cal, rms=0.071420Jy  sigma=1.357166
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071420Jy  sigma=1.357166
! Fit after  self-cal, rms=0.071781Jy  sigma=1.353197
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.054 mas, bmaj=3.888 mas, bpa=17.24 degrees
! Estimated noise=0.307505 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000886809 Jy
! Component: 100  -  total flux cleaned = -0.000889039 Jy
! Component: 150  -  total flux cleaned = -0.000889246 Jy
! Component: 200  -  total flux cleaned = -0.000851669 Jy
! Total flux subtracted in 200 components = -0.000851669 Jy
! Clean residual min=-0.001832 max=0.001710 Jy/beam
! Clean residual mean=-0.000001 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.271371 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 112 components and 0.271371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071760Jy  sigma=1.352875
! Fit after  self-cal, rms=0.071763Jy  sigma=1.352856
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.42035e-05 Jy
! Component: 100  -  total flux cleaned = 0.000106751 Jy
! Component: 150  -  total flux cleaned = 0.000136748 Jy
! Component: 200  -  total flux cleaned = 0.000164536 Jy
! Total flux subtracted in 200 components = 0.000164536 Jy
! Clean residual min=-0.001812 max=0.001676 Jy/beam
! Clean residual mean=-0.000001 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.271535 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 118 components and 0.271535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071757Jy  sigma=1.352736
! Fit after  self-cal, rms=0.071755Jy  sigma=1.352732
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071755Jy  sigma=1.352732
! Fit after  self-cal, rms=0.072009Jy  sigma=1.352626
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.238 mas, bmaj=5.458 mas, bpa=5.75 degrees
! Estimated noise=0.348623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012303 Jy
! Component: 100  -  total flux cleaned = 0.000161448 Jy
! Component: 150  -  total flux cleaned = 0.000175401 Jy
! Component: 200  -  total flux cleaned = 0.000175645 Jy
! Total flux subtracted in 200 components = 0.000175645 Jy
! Clean residual min=-0.001998 max=0.001834 Jy/beam
! Clean residual mean=-0.000002 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.271711 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 130 components and 0.271711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072006Jy  sigma=1.352537
! Fit after  self-cal, rms=0.072007Jy  sigma=1.352516
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123127 Jy
! Component: 100  -  total flux cleaned = 0.000184731 Jy
! Component: 150  -  total flux cleaned = 0.000220987 Jy
! Component: 200  -  total flux cleaned = 0.000263275 Jy
! Total flux subtracted in 200 components = 0.000263275 Jy
! Clean residual min=-0.001988 max=0.001871 Jy/beam
! Clean residual mean=-0.000001 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.271974 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 136 components and 0.271974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072009Jy  sigma=1.352500
! Fit after  self-cal, rms=0.072008Jy  sigma=1.352494
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=3.894 mas, bpa=17.28 degrees
! Estimated noise=0.307491 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.055 x 3.894 at 17.28 degrees (North through East)
! Clean map  min=-0.0016844  max=0.23025 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7716 mas, bmaj=3.599 mas, bpa=19.49 degrees
! Estimated noise=0.604725 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.173457 Jy
! Component: 100  -  total flux cleaned = 0.215868 Jy
! Component: 150  -  total flux cleaned = 0.236502 Jy
! Component: 200  -  total flux cleaned = 0.248297 Jy
! Total flux subtracted in 200 components = 0.248297 Jy
! Clean residual min=-0.003801 max=0.005908 Jy/beam
! Clean residual mean=-0.000006 rms=0.001002 Jy/beam
! Combined flux in latest and established models = 0.248297 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.248297 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=3.894 mas, bpa=17.28 degrees
! Estimated noise=0.307491 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00955596 Jy
! Component: 100  -  total flux cleaned = 0.0144093 Jy
! Component: 150  -  total flux cleaned = 0.0173623 Jy
! Component: 200  -  total flux cleaned = 0.0193324 Jy
! Total flux subtracted in 200 components = 0.0193324 Jy
! Clean residual min=-0.001964 max=0.001946 Jy/beam
! Clean residual mean=-0.000004 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.267629 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 62 components and 0.267629 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.238 mas, bmaj=5.458 mas, bpa=5.75 degrees
! Estimated noise=0.348623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019372 Jy
! Component: 100  -  total flux cleaned = 0.00306644 Jy
! Component: 150  -  total flux cleaned = 0.00379021 Jy
! Component: 200  -  total flux cleaned = 0.00425396 Jy
! Total flux subtracted in 200 components = 0.00425396 Jy
! Clean residual min=-0.002160 max=0.001844 Jy/beam
! Clean residual mean=-0.000001 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.271883 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120419 Jy
! Component: 100  -  total flux cleaned = 0.000203107 Jy
! Component: 150  -  total flux cleaned = 0.000254295 Jy
! Component: 200  -  total flux cleaned = 0.000301463 Jy
! Total flux subtracted in 200 components = 0.000301463 Jy
! Clean residual min=-0.002104 max=0.001873 Jy/beam
! Clean residual mean=-0.000001 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.272185 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 84 components and 0.272185 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=3.894 mas, bpa=17.28 degrees
! Estimated noise=0.307491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000456135 Jy
! Component: 100  -  total flux cleaned = -0.000536168 Jy
! Component: 150  -  total flux cleaned = -0.000501174 Jy
! Component: 200  -  total flux cleaned = -0.000470696 Jy
! Total flux subtracted in 200 components = -0.000470696 Jy
! Clean residual min=-0.001773 max=0.001606 Jy/beam
! Clean residual mean=-0.000001 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.271714 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 93 components and 0.271714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071984Jy  sigma=1.352306
! Fit after  self-cal, rms=0.071975Jy  sigma=1.352276
wmodel /J0025-2227_X_map.mod
! wmodel: Unable to open new model file: /J0025-2227_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0025-2227_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.055 x 3.894 at 17.28 degrees (North through East)
! Clean map  min=-0.001674  max=0.23072 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0025-2227_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.23072 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000435756 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.566603 0.566603 1.13321 2.26641 4.53282 9.06565 18.1313 36.2626 72.5252
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.23 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  529.471 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0025-2227_X_dfm.log closed on Thu May 19 18:15:46 2016