! Started logfile: /scr/pima/bg219e_uvs/J0025-2227_S_uvs.log on Thu Apr  7 06:31:36 2016
obs /scr/pima/bg219e_uvs/J0025-2227_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0025-2227_S_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.901235 visibilities/baseline/integration-bin.
! Found source: J0025-2227
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4672 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0025-2227_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019741Jy  sigma=19.021397
! Fit after  self-cal, rms=0.804990Jy  sigma=14.937691
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.116 mas, bmaj=13.5 mas, bpa=17.86 degrees
! Estimated noise=0.9206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.152436 Jy
! Component: 100  -  total flux cleaned = 0.186732 Jy
! Total flux subtracted in 100 components = 0.186732 Jy
! Clean residual min=-0.007534 max=0.012339 Jy/beam
! Clean residual mean=-0.000006 rms=0.001994 Jy/beam
! Combined flux in latest and established models = 0.186732 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.186732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079149Jy  sigma=1.408580
! Fit after  self-cal, rms=0.079129Jy  sigma=1.408369
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013597 Jy
! Component: 100  -  total flux cleaned = 0.0205352 Jy
! Total flux subtracted in 100 components = 0.0205352 Jy
! Clean residual min=-0.005646 max=0.005648 Jy/beam
! Clean residual mean=0.000006 rms=0.001503 Jy/beam
! Combined flux in latest and established models = 0.207267 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 22 components and 0.207267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076390Jy  sigma=1.346738
! Fit after  self-cal, rms=0.076329Jy  sigma=1.345577
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.014 mas, bmaj=14.51 mas, bpa=16.23 degrees
! Estimated noise=0.610279 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00649744 Jy
! Component: 100  -  total flux cleaned = 0.0100115 Jy
! Component: 150  -  total flux cleaned = 0.0121831 Jy
! Component: 200  -  total flux cleaned = 0.0135472 Jy
! Total flux subtracted in 200 components = 0.0135472 Jy
! Clean residual min=-0.003164 max=0.003643 Jy/beam
! Clean residual mean=-0.000009 rms=0.000899 Jy/beam
! Combined flux in latest and established models = 0.220815 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 56 components and 0.220815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075801Jy  sigma=1.334168
! Fit after  self-cal, rms=0.075808Jy  sigma=1.333995
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.014 x 14.51 at 16.23 degrees (North through East)
! Clean map  min=-0.0030552  max=0.19773 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        0.98     
!   LA        1.03     NL        0.97     OV        1.01     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        1.06     KP        1.00     
!   LA        1.03     NL        0.98     OV        0.97     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.06     KP        1.00     
!   LA        1.01     NL        0.99     OV        0.98     PT        1.02     
!   SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.02     KP        0.99     
!   LA        1.01     NL        0.98     OV        0.99     PT        1.00     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.075808Jy  sigma=1.333995
! Fit after  self-cal, rms=0.075875Jy  sigma=1.329265
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.03 mas, bmaj=14.56 mas, bpa=16.25 degrees
! Estimated noise=0.609687 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000744346 Jy
! Component: 100  -  total flux cleaned = -0.000802948 Jy
! Component: 150  -  total flux cleaned = -0.000803667 Jy
! Component: 200  -  total flux cleaned = -0.000752346 Jy
! Total flux subtracted in 200 components = -0.000752346 Jy
! Clean residual min=-0.003035 max=0.003488 Jy/beam
! Clean residual mean=-0.000020 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.220062 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 64 components and 0.220062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075851Jy  sigma=1.328838
! Fit after  self-cal, rms=0.075861Jy  sigma=1.328779
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075861Jy  sigma=1.328779
! Fit after  self-cal, rms=0.075957Jy  sigma=1.326798
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.035 mas, bmaj=14.57 mas, bpa=16.24 degrees
! Estimated noise=0.610306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000432746 Jy
! Component: 100  -  total flux cleaned = -0.000383859 Jy
! Component: 150  -  total flux cleaned = -0.000317257 Jy
! Component: 200  -  total flux cleaned = -0.000297357 Jy
! Total flux subtracted in 200 components = -0.000297357 Jy
! Clean residual min=-0.002925 max=0.003482 Jy/beam
! Clean residual mean=-0.000018 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.219765 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 74 components and 0.219765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075943Jy  sigma=1.326536
! Fit after  self-cal, rms=0.075944Jy  sigma=1.326526
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.67012e-05 Jy
! Component: 100  -  total flux cleaned = 3.56539e-05 Jy
! Component: 150  -  total flux cleaned = 7.20786e-05 Jy
! Component: 200  -  total flux cleaned = 8.99561e-05 Jy
! Total flux subtracted in 200 components = 8.99561e-05 Jy
! Clean residual min=-0.002916 max=0.003486 Jy/beam
! Clean residual mean=-0.000018 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.219855 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.219855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075935Jy  sigma=1.326386
! Fit after  self-cal, rms=0.075935Jy  sigma=1.326380
! Inverting map 
! Added new window around map position (-86, -20.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159724 Jy
! Component: 100  -  total flux cleaned = 0.00160392 Jy
! Component: 150  -  total flux cleaned = 0.00148226 Jy
! Component: 200  -  total flux cleaned = 0.00133198 Jy
! Total flux subtracted in 200 components = 0.00133198 Jy
! Clean residual min=-0.002770 max=0.003247 Jy/beam
! Clean residual mean=-0.000018 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.221187 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 99 components and 0.221187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075785Jy  sigma=1.323473
! Fit after  self-cal, rms=0.075777Jy  sigma=1.323369
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075777Jy  sigma=1.323369
! Fit after  self-cal, rms=0.075696Jy  sigma=1.318348
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.036 mas, bmaj=14.56 mas, bpa=16.22 degrees
! Estimated noise=0.608611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000401965 Jy
! Component: 100  -  total flux cleaned = 9.5545e-05 Jy
! Component: 150  -  total flux cleaned = -5.60898e-05 Jy
! Component: 200  -  total flux cleaned = -9.12011e-05 Jy
! Total flux subtracted in 200 components = -9.12011e-05 Jy
! Clean residual min=-0.002813 max=0.002784 Jy/beam
! Clean residual mean=-0.000016 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.221096 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 122 components and 0.221096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075657Jy  sigma=1.317531
! Fit after  self-cal, rms=0.075663Jy  sigma=1.317470
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.48101e-05 Jy
! Component: 100  -  total flux cleaned = -6.67703e-06 Jy
! Component: 150  -  total flux cleaned = 1.87117e-05 Jy
! Component: 200  -  total flux cleaned = -7.29168e-06 Jy
! Total flux subtracted in 200 components = -7.29168e-06 Jy
! Clean residual min=-0.002782 max=0.002758 Jy/beam
! Clean residual mean=-0.000016 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.221089 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 135 components and 0.221089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075646Jy  sigma=1.317098
! Fit after  self-cal, rms=0.075645Jy  sigma=1.317089
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075645Jy  sigma=1.317089
! Fit after  self-cal, rms=0.075598Jy  sigma=1.317032
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.028 mas, bmaj=20.04 mas, bpa=6.447 degrees
! Estimated noise=0.678204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000242213 Jy
! Component: 100  -  total flux cleaned = -0.000331177 Jy
! Component: 150  -  total flux cleaned = -0.000383059 Jy
! Component: 200  -  total flux cleaned = -0.000451332 Jy
! Total flux subtracted in 200 components = -0.000451332 Jy
! Clean residual min=-0.002459 max=0.002675 Jy/beam
! Clean residual mean=-0.000021 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.220637 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 147 components and 0.220637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075599Jy  sigma=1.316899
! Fit after  self-cal, rms=0.075601Jy  sigma=1.316862
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000209048 Jy
! Component: 100  -  total flux cleaned = -0.000288439 Jy
! Component: 150  -  total flux cleaned = -0.000342649 Jy
! Component: 200  -  total flux cleaned = -0.000393538 Jy
! Total flux subtracted in 200 components = -0.000393538 Jy
! Clean residual min=-0.002444 max=0.002593 Jy/beam
! Clean residual mean=-0.000020 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.220244 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 156 components and 0.220244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075603Jy  sigma=1.316825
! Fit after  self-cal, rms=0.075604Jy  sigma=1.316814
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.037 mas, bmaj=14.57 mas, bpa=16.22 degrees
! Estimated noise=0.607895 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.037 x 14.57 at 16.22 degrees (North through East)
! Clean map  min=-0.002626  max=0.19742 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.132 mas, bmaj=13.5 mas, bpa=17.84 degrees
! Estimated noise=0.917682 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.151838 Jy
! Component: 100  -  total flux cleaned = 0.186383 Jy
! Component: 150  -  total flux cleaned = 0.199881 Jy
! Component: 200  -  total flux cleaned = 0.206641 Jy
! Total flux subtracted in 200 components = 0.206641 Jy
! Clean residual min=-0.005648 max=0.004818 Jy/beam
! Clean residual mean=-0.000002 rms=0.001369 Jy/beam
! Combined flux in latest and established models = 0.206641 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.206641 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.037 mas, bmaj=14.57 mas, bpa=16.22 degrees
! Estimated noise=0.607895 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00652521 Jy
! Component: 100  -  total flux cleaned = 0.00943978 Jy
! Component: 150  -  total flux cleaned = 0.0102507 Jy
! Component: 200  -  total flux cleaned = 0.0108936 Jy
! Total flux subtracted in 200 components = 0.0108936 Jy
! Clean residual min=-0.002955 max=0.002905 Jy/beam
! Clean residual mean=-0.000018 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.217534 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 50 components and 0.217535 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.028 mas, bmaj=20.04 mas, bpa=6.447 degrees
! Estimated noise=0.678204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145873 Jy
! Component: 100  -  total flux cleaned = 0.00189208 Jy
! Component: 150  -  total flux cleaned = 0.00201965 Jy
! Component: 200  -  total flux cleaned = 0.00221219 Jy
! Total flux subtracted in 200 components = 0.00221219 Jy
! Clean residual min=-0.002439 max=0.002688 Jy/beam
! Clean residual mean=-0.000022 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.219747 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107519 Jy
! Component: 100  -  total flux cleaned = 0.000141422 Jy
! Component: 150  -  total flux cleaned = 0.000203085 Jy
! Component: 200  -  total flux cleaned = 0.000231882 Jy
! Total flux subtracted in 200 components = 0.000231882 Jy
! Clean residual min=-0.002393 max=0.002602 Jy/beam
! Clean residual mean=-0.000020 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.219979 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 74 components and 0.219979 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.037 mas, bmaj=14.57 mas, bpa=16.22 degrees
! Estimated noise=0.607895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.15411e-06 Jy
! Component: 100  -  total flux cleaned = 0.000114088 Jy
! Component: 150  -  total flux cleaned = 0.000153402 Jy
! Component: 200  -  total flux cleaned = 0.000189558 Jy
! Total flux subtracted in 200 components = 0.000189558 Jy
! Clean residual min=-0.002723 max=0.002789 Jy/beam
! Clean residual mean=-0.000015 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.220168 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 95 components and 0.220168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075653Jy  sigma=1.317693
! Fit after  self-cal, rms=0.075650Jy  sigma=1.317646
wmodel /scr/pima/bg219e_uvs/J0025-2227_S_map.mod
! Writing 95 model components to file: /scr/pima/bg219e_uvs/J0025-2227_S_map.mod
wobs /scr/pima/bg219e_uvs/J0025-2227_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0025-2227_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J0025-2227_S_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219e_uvs/J0025-2227_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202507 Jy
! Component: 100  -  total flux cleaned = 0.000667751 Jy
! Component: 150  -  total flux cleaned = 0.000755612 Jy
! Component: 200  -  total flux cleaned = 0.00079751 Jy
! Component: 250  -  total flux cleaned = 0.000676539 Jy
! Component: 300  -  total flux cleaned = 0.000558982 Jy
! Component: 350  -  total flux cleaned = 0.000484441 Jy
! Component: 400  -  total flux cleaned = 0.000485083 Jy
! Component: 450  -  total flux cleaned = 0.000414575 Jy
! Component: 500  -  total flux cleaned = 0.000276397 Jy
! Component: 550  -  total flux cleaned = 0.000140035 Jy
! Component: 600  -  total flux cleaned = -9.36854e-05 Jy
! Component: 650  -  total flux cleaned = -0.000224637 Jy
! Component: 700  -  total flux cleaned = -0.000289236 Jy
! Component: 750  -  total flux cleaned = -0.00047781 Jy
! Component: 800  -  total flux cleaned = -0.000508662 Jy
! Component: 850  -  total flux cleaned = -0.000600124 Jy
! Component: 900  -  total flux cleaned = -0.000719491 Jy
! Component: 950  -  total flux cleaned = -0.000778311 Jy
! Component: 1000  -  total flux cleaned = -0.000865712 Jy
! Component: 1050  -  total flux cleaned = -0.00106678 Jy
! Component: 1100  -  total flux cleaned = -0.00123648 Jy
! Component: 1150  -  total flux cleaned = -0.00137609 Jy
! Component: 1200  -  total flux cleaned = -0.00156902 Jy
! Component: 1250  -  total flux cleaned = -0.00173238 Jy
! Component: 1300  -  total flux cleaned = -0.00181308 Jy
! Component: 1350  -  total flux cleaned = -0.00191972 Jy
! Component: 1400  -  total flux cleaned = -0.00210365 Jy
! Component: 1450  -  total flux cleaned = -0.00225869 Jy
! Component: 1500  -  total flux cleaned = -0.00230976 Jy
! Component: 1550  -  total flux cleaned = -0.00243659 Jy
! Component: 1600  -  total flux cleaned = -0.00253718 Jy
! Component: 1650  -  total flux cleaned = -0.00263659 Jy
! Component: 1700  -  total flux cleaned = -0.00283277 Jy
! Component: 1750  -  total flux cleaned = -0.00288136 Jy
! Component: 1800  -  total flux cleaned = -0.00302554 Jy
! Component: 1850  -  total flux cleaned = -0.00304903 Jy
! Component: 1900  -  total flux cleaned = -0.00314305 Jy
! Component: 1950  -  total flux cleaned = -0.00323592 Jy
! Component: 2000  -  total flux cleaned = -0.003305 Jy
! Component: 2050  -  total flux cleaned = -0.0034189 Jy
! Component: 2100  -  total flux cleaned = -0.00359906 Jy
! Component: 2150  -  total flux cleaned = -0.00371028 Jy
! Component: 2200  -  total flux cleaned = -0.00370998 Jy
! Component: 2250  -  total flux cleaned = -0.00373225 Jy
! Component: 2300  -  total flux cleaned = -0.00388418 Jy
! Component: 2350  -  total flux cleaned = -0.00394893 Jy
! Component: 2400  -  total flux cleaned = -0.00405546 Jy
! Component: 2450  -  total flux cleaned = -0.0041819 Jy
! Component: 2500  -  total flux cleaned = -0.00416115 Jy
! Component: 2550  -  total flux cleaned = -0.00430657 Jy
! Component: 2600  -  total flux cleaned = -0.0043476 Jy
! Component: 2650  -  total flux cleaned = -0.00436794 Jy
! Component: 2700  -  total flux cleaned = -0.00444914 Jy
! Component: 2750  -  total flux cleaned = -0.00450956 Jy
! Component: 2800  -  total flux cleaned = -0.00458953 Jy
! Component: 2850  -  total flux cleaned = -0.00458937 Jy
! Component: 2900  -  total flux cleaned = -0.00466774 Jy
! Component: 2950  -  total flux cleaned = -0.00466796 Jy
! Component: 3000  -  total flux cleaned = -0.00474558 Jy
! Component: 3050  -  total flux cleaned = -0.00472649 Jy
! Component: 3100  -  total flux cleaned = -0.00482187 Jy
! Component: 3150  -  total flux cleaned = -0.00480305 Jy
! Component: 3200  -  total flux cleaned = -0.00485955 Jy
! Component: 3250  -  total flux cleaned = -0.0048969 Jy
! Component: 3300  -  total flux cleaned = -0.0049156 Jy
! Component: 3350  -  total flux cleaned = -0.00491554 Jy
! Component: 3400  -  total flux cleaned = -0.00493388 Jy
! Component: 3450  -  total flux cleaned = -0.00500676 Jy
! Component: 3500  -  total flux cleaned = -0.00506061 Jy
! Component: 3550  -  total flux cleaned = -0.00498863 Jy
! Component: 3600  -  total flux cleaned = -0.00511375 Jy
! Component: 3650  -  total flux cleaned = -0.00509619 Jy
! Component: 3700  -  total flux cleaned = -0.00513153 Jy
! Component: 3750  -  total flux cleaned = -0.00511399 Jy
! Component: 3800  -  total flux cleaned = -0.00520094 Jy
! Component: 3850  -  total flux cleaned = -0.0052355 Jy
! Component: 3900  -  total flux cleaned = -0.00526962 Jy
! Component: 3950  -  total flux cleaned = -0.00526979 Jy
! Component: 4000  -  total flux cleaned = -0.00530373 Jy
! Component: 4050  -  total flux cleaned = -0.00537144 Jy
! Total flux subtracted in 4096 components = -0.00537144 Jy
! Clean residual min=-0.000900 max=0.001104 Jy/beam
! Clean residual mean=-0.000005 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.214797 Jy
keep
! Adding 248 model components to the UV plane model.
! The established model now contains 343 components and 0.214797 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0025-2227_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.037 x 14.57 at 16.22 degrees (North through East)
! Clean map  min=-0.0022875  max=0.19756 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0025-2227_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.197561 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000327192 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.496847 0.496847 0.993694 1.98739 3.97478 7.94955 15.8991 31.7982 63.5964
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.197 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  603.807 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0025-2227_S_uvs.log closed on Thu Apr  7 06:31:40 2016