! Started logfile: /scr/pima/bg219e_uvs/J0019-3031_S_uvs.log on Thu Apr 7 06:31:23 2016 obs /scr/pima/bg219e_uvs/J0019-3031_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J0019-3031_S_uva.fits ! AN table 1: 47 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.893026 visibilities/baseline/integration-bin. ! Found source: J0019-3031 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 6044 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0019-3031_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.077109Jy sigma=17.380334 ! Fit after self-cal, rms=0.625569Jy sigma=9.370124 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=12.32 mas, bpa=18.57 degrees ! Estimated noise=0.922721 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.31119 Jy ! Component: 100 - total flux cleaned = 0.387243 Jy ! Total flux subtracted in 100 components = 0.387243 Jy ! Clean residual min=-0.016214 max=0.032630 Jy/beam ! Clean residual mean=-0.000070 rms=0.005404 Jy/beam ! Combined flux in latest and established models = 0.387243 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.387243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138097Jy sigma=1.860929 ! Fit after self-cal, rms=0.137902Jy sigma=1.860053 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0364032 Jy ! Component: 100 - total flux cleaned = 0.0561086 Jy ! Total flux subtracted in 100 components = 0.0561086 Jy ! Clean residual min=-0.017411 max=0.020883 Jy/beam ! Clean residual mean=-0.000030 rms=0.004287 Jy/beam ! Combined flux in latest and established models = 0.443352 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.443352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126147Jy sigma=1.628506 ! Fit after self-cal, rms=0.126106Jy sigma=1.628183 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.013 mas, bmaj=14.81 mas, bpa=16 degrees ! Estimated noise=0.596424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170427 Jy ! Component: 100 - total flux cleaned = 0.0262596 Jy ! Component: 150 - total flux cleaned = 0.0297412 Jy ! Component: 200 - total flux cleaned = 0.030152 Jy ! Total flux subtracted in 200 components = 0.030152 Jy ! Clean residual min=-0.014137 max=0.016588 Jy/beam ! Clean residual mean=-0.000007 rms=0.003648 Jy/beam ! Combined flux in latest and established models = 0.473504 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 37 components and 0.473504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123319Jy sigma=1.585122 ! Fit after self-cal, rms=0.123262Jy sigma=1.584981 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.013 x 14.81 at 16 degrees (North through East) ! Clean map min=-0.012934 max=0.37616 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.19 KP 1.00 ! LA 1.00 NL 0.97 OV 0.97 PT 1.01 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.14 KP 1.02 ! LA 0.99 NL 1.00 OV 0.97 PT 1.04 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.123262Jy sigma=1.584981 ! Fit after self-cal, rms=0.124108Jy sigma=1.563797 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.021 mas, bmaj=14.95 mas, bpa=16.27 degrees ! Estimated noise=0.596077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00274876 Jy ! Component: 100 - total flux cleaned = -0.00336786 Jy ! Component: 150 - total flux cleaned = -0.00390018 Jy ! Component: 200 - total flux cleaned = -0.00422009 Jy ! Total flux subtracted in 200 components = -0.00422009 Jy ! Clean residual min=-0.013048 max=0.015763 Jy/beam ! Clean residual mean=-0.000013 rms=0.003368 Jy/beam ! Combined flux in latest and established models = 0.469284 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.469284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123197Jy sigma=1.557582 ! Fit after self-cal, rms=0.123200Jy sigma=1.557513 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123200Jy sigma=1.557513 ! Fit after self-cal, rms=0.120540Jy sigma=1.567736 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=14.7 mas, bpa=16.45 degrees ! Estimated noise=0.580586 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169944 Jy ! Component: 100 - total flux cleaned = 0.00266615 Jy ! Component: 150 - total flux cleaned = 0.00287016 Jy ! Component: 200 - total flux cleaned = 0.00249991 Jy ! Total flux subtracted in 200 components = 0.00249991 Jy ! Clean residual min=-0.013254 max=0.016107 Jy/beam ! Clean residual mean=-0.000013 rms=0.003367 Jy/beam ! Combined flux in latest and established models = 0.471784 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 0.471784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118995Jy sigma=1.557111 ! Fit after self-cal, rms=0.118915Jy sigma=1.556939 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.5, 64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654216 Jy ! Component: 100 - total flux cleaned = 0.00427095 Jy ! Component: 150 - total flux cleaned = 0.0019627 Jy ! Component: 200 - total flux cleaned = 0.000289452 Jy ! Total flux subtracted in 200 components = 0.000289452 Jy ! Clean residual min=-0.011537 max=0.012423 Jy/beam ! Clean residual mean=-0.000015 rms=0.002914 Jy/beam ! Combined flux in latest and established models = 0.472073 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 93 components and 0.472073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114742Jy sigma=1.506536 ! Fit after self-cal, rms=0.114467Jy sigma=1.503632 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114467Jy sigma=1.503632 ! Fit after self-cal, rms=0.114091Jy sigma=1.500123 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.919 mas, bmaj=14.7 mas, bpa=16.43 degrees ! Estimated noise=0.577851 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000722302 Jy ! Component: 100 - total flux cleaned = 0.000132806 Jy ! Component: 150 - total flux cleaned = -0.000681955 Jy ! Component: 200 - total flux cleaned = -0.00117452 Jy ! Total flux subtracted in 200 components = -0.00117452 Jy ! Clean residual min=-0.010679 max=0.011032 Jy/beam ! Clean residual mean=-0.000020 rms=0.002710 Jy/beam ! Combined flux in latest and established models = 0.470899 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 109 components and 0.470899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112163Jy sigma=1.483352 ! Fit after self-cal, rms=0.112064Jy sigma=1.482690 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.25686e-05 Jy ! Component: 100 - total flux cleaned = -0.000619879 Jy ! Component: 150 - total flux cleaned = -0.0012348 Jy ! Component: 200 - total flux cleaned = -0.00181191 Jy ! Total flux subtracted in 200 components = -0.00181191 Jy ! Clean residual min=-0.010557 max=0.010106 Jy/beam ! Clean residual mean=-0.000021 rms=0.002618 Jy/beam ! Combined flux in latest and established models = 0.469087 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 120 components and 0.469087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111005Jy sigma=1.473243 ! Fit after self-cal, rms=0.110935Jy sigma=1.472946 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110935Jy sigma=1.472946 ! Fit after self-cal, rms=0.110787Jy sigma=1.472605 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.073 mas, bmaj=23.39 mas, bpa=7.961 degrees ! Estimated noise=0.657505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.003551 Jy ! Component: 100 - total flux cleaned = -0.00338441 Jy ! Component: 150 - total flux cleaned = -0.00281028 Jy ! Component: 200 - total flux cleaned = -0.00230234 Jy ! Total flux subtracted in 200 components = -0.00230234 Jy ! Clean residual min=-0.009020 max=0.008269 Jy/beam ! Clean residual mean=-0.000030 rms=0.002682 Jy/beam ! Combined flux in latest and established models = 0.466784 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 130 components and 0.466784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110520Jy sigma=1.469264 ! Fit after self-cal, rms=0.110497Jy sigma=1.468896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000538627 Jy ! Component: 100 - total flux cleaned = 0.000889009 Jy ! Component: 150 - total flux cleaned = 0.00110454 Jy ! Component: 200 - total flux cleaned = 0.00130742 Jy ! Total flux subtracted in 200 components = 0.00130742 Jy ! Clean residual min=-0.009159 max=0.008294 Jy/beam ! Clean residual mean=-0.000027 rms=0.002655 Jy/beam ! Combined flux in latest and established models = 0.468092 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 0.468092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110199Jy sigma=1.467578 ! Fit after self-cal, rms=0.110178Jy sigma=1.467351 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.916 mas, bmaj=14.71 mas, bpa=16.42 degrees ! Estimated noise=0.576349 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.916 x 14.71 at 16.42 degrees (North through East) ! Clean map min=-0.017722 max=0.36678 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=12.33 mas, bpa=18.85 degrees ! Estimated noise=0.876098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.295242 Jy ! Component: 100 - total flux cleaned = 0.367186 Jy ! Component: 150 - total flux cleaned = 0.40266 Jy ! Component: 200 - total flux cleaned = 0.425552 Jy ! Total flux subtracted in 200 components = 0.425552 Jy ! Clean residual min=-0.016982 max=0.020022 Jy/beam ! Clean residual mean=-0.000049 rms=0.003920 Jy/beam ! Combined flux in latest and established models = 0.425552 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.425552 Jy ! Inverting map and beam ! Estimated beam: bmin=3.916 mas, bmaj=14.71 mas, bpa=16.42 degrees ! Estimated noise=0.576349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260594 Jy ! Component: 100 - total flux cleaned = 0.0350249 Jy ! Component: 150 - total flux cleaned = 0.036088 Jy ! Component: 200 - total flux cleaned = 0.0365451 Jy ! Total flux subtracted in 200 components = 0.0365451 Jy ! Clean residual min=-0.010930 max=0.013541 Jy/beam ! Clean residual mean=-0.000020 rms=0.003030 Jy/beam ! Combined flux in latest and established models = 0.462097 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 82 components and 0.462097 Jy ! Inverting map ! Added new window around map position (-9, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275739 Jy ! Component: 100 - total flux cleaned = 0.0027822 Jy ! Component: 150 - total flux cleaned = 0.00313495 Jy ! Component: 200 - total flux cleaned = 0.00347012 Jy ! Total flux subtracted in 200 components = 0.00347012 Jy ! Clean residual min=-0.009402 max=0.008756 Jy/beam ! Clean residual mean=-0.000018 rms=0.002643 Jy/beam ! Combined flux in latest and established models = 0.465567 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 114 components and 0.465567 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.073 mas, bmaj=23.39 mas, bpa=7.961 degrees ! Estimated noise=0.657505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325853 Jy ! Component: 100 - total flux cleaned = 0.00655896 Jy ! Component: 150 - total flux cleaned = 0.00836386 Jy ! Component: 200 - total flux cleaned = 0.00942713 Jy ! Total flux subtracted in 200 components = 0.00942713 Jy ! Clean residual min=-0.008159 max=0.008800 Jy/beam ! Clean residual mean=-0.000014 rms=0.002578 Jy/beam ! Combined flux in latest and established models = 0.474994 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000970419 Jy ! Component: 100 - total flux cleaned = 0.00172401 Jy ! Component: 150 - total flux cleaned = 0.00214731 Jy ! Component: 200 - total flux cleaned = 0.00242326 Jy ! Total flux subtracted in 200 components = 0.00242326 Jy ! Clean residual min=-0.008122 max=0.008846 Jy/beam ! Clean residual mean=-0.000010 rms=0.002531 Jy/beam ! Combined flux in latest and established models = 0.477417 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 156 components and 0.477417 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.916 mas, bmaj=14.71 mas, bpa=16.42 degrees ! Estimated noise=0.576349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153503 Jy ! Component: 100 - total flux cleaned = -0.00342735 Jy ! Component: 150 - total flux cleaned = -0.00366629 Jy ! Component: 200 - total flux cleaned = -0.00343715 Jy ! Total flux subtracted in 200 components = -0.00343715 Jy ! Clean residual min=-0.008371 max=0.008172 Jy/beam ! Clean residual mean=-0.000012 rms=0.002349 Jy/beam ! Combined flux in latest and established models = 0.47398 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 190 components and 0.47398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107672Jy sigma=1.444622 ! Fit after self-cal, rms=0.107595Jy sigma=1.443379 wmodel /scr/pima/bg219e_uvs/J0019-3031_S_map.mod ! Writing 190 model components to file: /scr/pima/bg219e_uvs/J0019-3031_S_map.mod wobs /scr/pima/bg219e_uvs/J0019-3031_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J0019-3031_S_uvs.fits wwins /scr/pima/bg219e_uvs/J0019-3031_S_map.win ! wwins: Wrote 4 windows to /scr/pima/bg219e_uvs/J0019-3031_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113224 Jy ! Component: 100 - total flux cleaned = -0.000319087 Jy ! Component: 150 - total flux cleaned = 0.00019868 Jy ! Component: 200 - total flux cleaned = 7.66968e-05 Jy ! Component: 250 - total flux cleaned = -4.31879e-05 Jy ! Component: 300 - total flux cleaned = -0.000513735 Jy ! Component: 350 - total flux cleaned = -0.00097008 Jy ! Component: 400 - total flux cleaned = -0.0013037 Jy ! Component: 450 - total flux cleaned = -0.0013061 Jy ! Component: 500 - total flux cleaned = -0.00120119 Jy ! Component: 550 - total flux cleaned = -0.00172322 Jy ! Component: 600 - total flux cleaned = -0.00172053 Jy ! Component: 650 - total flux cleaned = -0.00182303 Jy ! Component: 700 - total flux cleaned = -0.00202367 Jy ! Component: 750 - total flux cleaned = -0.00231593 Jy ! Component: 800 - total flux cleaned = -0.00241053 Jy ! Component: 850 - total flux cleaned = -0.00222246 Jy ! Component: 900 - total flux cleaned = -0.00249858 Jy ! Component: 950 - total flux cleaned = -0.00213324 Jy ! Component: 1000 - total flux cleaned = -0.0024915 Jy ! Component: 1050 - total flux cleaned = -0.00222554 Jy ! Component: 1100 - total flux cleaned = -0.00213889 Jy ! Component: 1150 - total flux cleaned = -0.00205334 Jy ! Component: 1200 - total flux cleaned = -0.00205377 Jy ! Component: 1250 - total flux cleaned = -0.00163564 Jy ! Component: 1300 - total flux cleaned = -0.00180195 Jy ! Component: 1350 - total flux cleaned = -0.00180191 Jy ! Component: 1400 - total flux cleaned = -0.00172139 Jy ! Component: 1450 - total flux cleaned = -0.0017989 Jy ! Component: 1500 - total flux cleaned = -0.00179886 Jy ! Component: 1550 - total flux cleaned = -0.0018759 Jy ! Component: 1600 - total flux cleaned = -0.00202762 Jy ! Component: 1650 - total flux cleaned = -0.00202721 Jy ! Component: 1700 - total flux cleaned = -0.00172868 Jy ! Component: 1750 - total flux cleaned = -0.00217186 Jy ! Component: 1800 - total flux cleaned = -0.00217041 Jy ! Component: 1850 - total flux cleaned = -0.0021699 Jy ! Component: 1900 - total flux cleaned = -0.00231317 Jy ! Component: 1950 - total flux cleaned = -0.00259509 Jy ! Component: 2000 - total flux cleaned = -0.00280515 Jy ! Component: 2050 - total flux cleaned = -0.00280473 Jy ! Component: 2100 - total flux cleaned = -0.00280601 Jy ! Component: 2150 - total flux cleaned = -0.00307813 Jy ! Component: 2200 - total flux cleaned = -0.003145 Jy ! Component: 2250 - total flux cleaned = -0.00321151 Jy ! Component: 2300 - total flux cleaned = -0.00327717 Jy ! Component: 2350 - total flux cleaned = -0.00327792 Jy ! Component: 2400 - total flux cleaned = -0.00340735 Jy ! Component: 2450 - total flux cleaned = -0.00334323 Jy ! Component: 2500 - total flux cleaned = -0.00353406 Jy ! Component: 2550 - total flux cleaned = -0.00353398 Jy ! Component: 2600 - total flux cleaned = -0.00347172 Jy ! Component: 2650 - total flux cleaned = -0.00353319 Jy ! Component: 2700 - total flux cleaned = -0.00347247 Jy ! Component: 2750 - total flux cleaned = -0.0035328 Jy ! Component: 2800 - total flux cleaned = -0.00359234 Jy ! Component: 2850 - total flux cleaned = -0.00347351 Jy ! Component: 2900 - total flux cleaned = -0.00341495 Jy ! Component: 2950 - total flux cleaned = -0.0034729 Jy ! Component: 3000 - total flux cleaned = -0.00347294 Jy ! Component: 3050 - total flux cleaned = -0.00353041 Jy ! Component: 3100 - total flux cleaned = -0.00353007 Jy ! Component: 3150 - total flux cleaned = -0.00352965 Jy ! Component: 3200 - total flux cleaned = -0.0034742 Jy ! Component: 3250 - total flux cleaned = -0.00347423 Jy ! Component: 3300 - total flux cleaned = -0.00358432 Jy ! Component: 3350 - total flux cleaned = -0.00342055 Jy ! Component: 3400 - total flux cleaned = -0.00331296 Jy ! Component: 3450 - total flux cleaned = -0.00347376 Jy ! Component: 3500 - total flux cleaned = -0.00315507 Jy ! Component: 3550 - total flux cleaned = -0.00331367 Jy ! Component: 3600 - total flux cleaned = -0.00315747 Jy ! Component: 3650 - total flux cleaned = -0.003262 Jy ! Component: 3700 - total flux cleaned = -0.00305547 Jy ! Component: 3750 - total flux cleaned = -0.00295408 Jy ! Component: 3800 - total flux cleaned = -0.00300483 Jy ! Component: 3850 - total flux cleaned = -0.00290377 Jy ! Component: 3900 - total flux cleaned = -0.00270366 Jy ! Component: 3950 - total flux cleaned = -0.00260455 Jy ! Component: 4000 - total flux cleaned = -0.00235885 Jy ! Component: 4050 - total flux cleaned = -0.00226174 Jy ! Total flux subtracted in 4096 components = -0.00221334 Jy ! Clean residual min=-0.002412 max=0.002479 Jy/beam ! Clean residual mean=-0.000022 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.471767 Jy keep ! Adding 335 model components to the UV plane model. ! The established model now contains 525 components and 0.471767 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J0019-3031_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.916 x 14.71 at 16.42 degrees (North through East) ! Clean map min=-0.016938 max=0.35464 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0019-3031_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.354642 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00110477 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.934554 0.934554 1.86911 3.73821 7.47643 14.9529 29.9057 59.8114 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.354 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 321.008 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J0019-3031_S_uvs.log closed on Thu Apr 7 06:31:27 2016