! Started logfile: /scr/pima/bg219e_uvs/J0015-1807_X_dfm.log on Thu May 19 18:14:38 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0015-1807_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0015-1807_X_uva.fits
! AN table 1: 57 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.841131 visibilities/baseline/integration-bin.
! Found source: J0015-1807
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20712 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0015-1807_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011230Jy  sigma=21.681838
! Fit after  self-cal, rms=0.889066Jy  sigma=18.823382
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9257 mas, bmaj=2.784 mas, bpa=18.82 degrees
! Estimated noise=0.537368 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0815007 Jy
! Component: 100  -  total flux cleaned = 0.108129 Jy
! Total flux subtracted in 100 components = 0.108129 Jy
! Clean residual min=-0.005936 max=0.012543 Jy/beam
! Clean residual mean=0.000021 rms=0.001857 Jy/beam
! Combined flux in latest and established models = 0.108129 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.108129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077421Jy  sigma=1.508736
! Fit after  self-cal, rms=0.077293Jy  sigma=1.505495
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149882 Jy
! Component: 100  -  total flux cleaned = 0.0241803 Jy
! Total flux subtracted in 100 components = 0.0241803 Jy
! Clean residual min=-0.004197 max=0.007996 Jy/beam
! Clean residual mean=0.000012 rms=0.001153 Jy/beam
! Combined flux in latest and established models = 0.13231 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 38 components and 0.13231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073304Jy  sigma=1.386537
! Fit after  self-cal, rms=0.073310Jy  sigma=1.385754
! Inverting map 
! Added new window around map position (1.6, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00770095 Jy
! Component: 100  -  total flux cleaned = 0.012382 Jy
! Total flux subtracted in 100 components = 0.012382 Jy
! Clean residual min=-0.003568 max=0.003755 Jy/beam
! Clean residual mean=0.000008 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.144692 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 52 components and 0.144692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072271Jy  sigma=1.355382
! Fit after  self-cal, rms=0.072249Jy  sigma=1.354433
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.272 mas, bmaj=3.319 mas, bpa=12.12 degrees
! Estimated noise=0.240716 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00567812 Jy
! Component: 100  -  total flux cleaned = 0.00896649 Jy
! Component: 150  -  total flux cleaned = 0.0111433 Jy
! Component: 200  -  total flux cleaned = 0.012664 Jy
! Total flux subtracted in 200 components = 0.012664 Jy
! Clean residual min=-0.002295 max=0.002482 Jy/beam
! Clean residual mean=0.000008 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.157356 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 86 components and 0.157356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071836Jy  sigma=1.341881
! Fit after  self-cal, rms=0.071826Jy  sigma=1.341374
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.272 x 3.319 at 12.12 degrees (North through East)
! Clean map  min=-0.002069  max=0.10543 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.08     KP        0.97     
!   LA        0.98     NL        0.99     OV        0.96     PT        1.01     
!   SC        1.17     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.03     KP        1.02     
!   LA        0.96     NL        1.04     OV        0.99     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.08     KP        0.98     
!   LA        0.95     NL        0.98     OV        0.99     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        1.11     KP        0.98     
!   LA        0.96     NL        1.02     OV        0.98     PT        0.99     
!   SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.05     KP        0.96     
!   LA        0.99     NL        0.99     OV        1.00     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.07     KP        1.02     
!   LA        0.98     NL        0.98     OV        0.96     PT        0.99     
!   SC        1.09     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.09     KP        0.96     
!   LA        0.95     NL        1.04     OV        1.01     PT        1.02     
!   SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        0.99     
!   LA        1.00     NL        0.99     OV        0.99     PT        1.00     
!   SC        0.91     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.97     KP        0.98     
!   LA        1.03     NL        1.01     OV        0.99     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.04     OV        1.05     PT        1.01     
!   SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.97     KP        1.02     
!   LA        1.00     NL        0.98     OV        0.97     PT        0.99     
!   SC        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.05     KP        1.01     
!   LA        0.99     NL        0.98     OV        1.00     PT        0.98     
!   SC        0.94     
! 
! 
! Fit before self-cal, rms=0.071826Jy  sigma=1.341374
! Fit after  self-cal, rms=0.071956Jy  sigma=1.337461
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.277 mas, bmaj=3.335 mas, bpa=12.35 degrees
! Estimated noise=0.239496 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000486971 Jy
! Component: 100  -  total flux cleaned = 0.000441504 Jy
! Component: 150  -  total flux cleaned = 0.000422837 Jy
! Component: 200  -  total flux cleaned = 0.000422629 Jy
! Total flux subtracted in 200 components = 0.000422629 Jy
! Clean residual min=-0.001934 max=0.002285 Jy/beam
! Clean residual mean=0.000004 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.157778 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 115 components and 0.157778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071937Jy  sigma=1.337152
! Fit after  self-cal, rms=0.071954Jy  sigma=1.337049
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071954Jy  sigma=1.337049
! Fit after  self-cal, rms=0.073070Jy  sigma=1.334203
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.278 mas, bmaj=3.322 mas, bpa=12.26 degrees
! Estimated noise=0.239737 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000324355 Jy
! Component: 100  -  total flux cleaned = 0.000357719 Jy
! Component: 150  -  total flux cleaned = 0.000358231 Jy
! Component: 200  -  total flux cleaned = 0.000372799 Jy
! Total flux subtracted in 200 components = 0.000372799 Jy
! Clean residual min=-0.001870 max=0.002171 Jy/beam
! Clean residual mean=0.000002 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.158151 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 125 components and 0.158151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073063Jy  sigma=1.334037
! Fit after  self-cal, rms=0.073083Jy  sigma=1.333985
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (28.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019804 Jy
! Component: 100  -  total flux cleaned = 0.00260649 Jy
! Component: 150  -  total flux cleaned = 0.00261011 Jy
! Component: 200  -  total flux cleaned = 0.00258086 Jy
! Total flux subtracted in 200 components = 0.00258086 Jy
! Clean residual min=-0.001553 max=0.001715 Jy/beam
! Clean residual mean=0.000002 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.160732 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 155 components and 0.160732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073028Jy  sigma=1.332428
! Fit after  self-cal, rms=0.073023Jy  sigma=1.332344
! Inverting map 
! Added new window around map position (4.4, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154361 Jy
! Component: 100  -  total flux cleaned = 0.00185906 Jy
! Component: 150  -  total flux cleaned = 0.00211827 Jy
! Component: 200  -  total flux cleaned = 0.00231269 Jy
! Total flux subtracted in 200 components = 0.00231269 Jy
! Clean residual min=-0.001393 max=0.001465 Jy/beam
! Clean residual mean=0.000002 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.163045 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 190 components and 0.163045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072982Jy  sigma=1.331170
! Fit after  self-cal, rms=0.072978Jy  sigma=1.331105
! Inverting map 
! Added new window around map position (34, 20).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121732 Jy
! Component: 100  -  total flux cleaned = 0.00172454 Jy
! Component: 150  -  total flux cleaned = 0.00191258 Jy
! Component: 200  -  total flux cleaned = 0.0020835 Jy
! Total flux subtracted in 200 components = 0.0020835 Jy
! Clean residual min=-0.001279 max=0.001189 Jy/beam
! Clean residual mean=0.000001 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.165128 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 211 components and 0.165128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072955Jy  sigma=1.330455
! Fit after  self-cal, rms=0.072953Jy  sigma=1.330423
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072953Jy  sigma=1.330423
! Fit after  self-cal, rms=0.073233Jy  sigma=1.330527
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.28 mas, bmaj=3.321 mas, bpa=12.27 degrees
! Estimated noise=0.239758 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000365932 Jy
! Component: 100  -  total flux cleaned = 0.000535635 Jy
! Component: 150  -  total flux cleaned = 0.000691535 Jy
! Component: 200  -  total flux cleaned = 0.000782262 Jy
! Total flux subtracted in 200 components = 0.000782262 Jy
! Clean residual min=-0.001217 max=0.001103 Jy/beam
! Clean residual mean=0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.16591 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 224 components and 0.16591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073222Jy  sigma=1.330288
! Fit after  self-cal, rms=0.073223Jy  sigma=1.330273
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184728 Jy
! Component: 100  -  total flux cleaned = 0.000284858 Jy
! Component: 150  -  total flux cleaned = 0.000348184 Jy
! Component: 200  -  total flux cleaned = 0.000423876 Jy
! Total flux subtracted in 200 components = 0.000423876 Jy
! Clean residual min=-0.001190 max=0.001079 Jy/beam
! Clean residual mean=0.000000 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.166334 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 230 components and 0.166334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073216Jy  sigma=1.330133
! Fit after  self-cal, rms=0.073216Jy  sigma=1.330130
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073216Jy  sigma=1.330130
! Fit after  self-cal, rms=0.073344Jy  sigma=1.330122
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.367 mas, bmaj=4.983 mas, bpa=2.395 degrees
! Estimated noise=0.257991 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247318 Jy
! Component: 100  -  total flux cleaned = 0.00040958 Jy
! Component: 150  -  total flux cleaned = 0.000566906 Jy
! Component: 200  -  total flux cleaned = 0.000698342 Jy
! Total flux subtracted in 200 components = 0.000698342 Jy
! Clean residual min=-0.001463 max=0.000991 Jy/beam
! Clean residual mean=-0.000000 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.167033 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 253 components and 0.167033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073342Jy  sigma=1.330035
! Fit after  self-cal, rms=0.073341Jy  sigma=1.330033
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016354 Jy
! Component: 100  -  total flux cleaned = 0.000259023 Jy
! Component: 150  -  total flux cleaned = 0.000329986 Jy
! Component: 200  -  total flux cleaned = 0.000371363 Jy
! Total flux subtracted in 200 components = 0.000371363 Jy
! Clean residual min=-0.001449 max=0.000971 Jy/beam
! Clean residual mean=-0.000000 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.167404 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 268 components and 0.167404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073340Jy  sigma=1.329983
! Fit after  self-cal, rms=0.073339Jy  sigma=1.329982
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.28 mas, bmaj=3.319 mas, bpa=12.31 degrees
! Estimated noise=0.239892 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.28 x 3.319 at 12.31 degrees (North through East)
! Clean map  min=-0.0011516  max=0.10508 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.93 mas, bmaj=2.786 mas, bpa=18.99 degrees
! Estimated noise=0.541048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0817833 Jy
! Component: 100  -  total flux cleaned = 0.108826 Jy
! Component: 150  -  total flux cleaned = 0.123996 Jy
! Component: 200  -  total flux cleaned = 0.133576 Jy
! Total flux subtracted in 200 components = 0.133576 Jy
! Clean residual min=-0.003811 max=0.005358 Jy/beam
! Clean residual mean=0.000009 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.133576 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.133576 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.28 mas, bmaj=3.319 mas, bpa=12.31 degrees
! Estimated noise=0.239892 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00951066 Jy
! Component: 100  -  total flux cleaned = 0.0147661 Jy
! Component: 150  -  total flux cleaned = 0.0181309 Jy
! Component: 200  -  total flux cleaned = 0.0206954 Jy
! Total flux subtracted in 200 components = 0.0206954 Jy
! Clean residual min=-0.001971 max=0.002105 Jy/beam
! Clean residual mean=0.000006 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.154272 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 81 components and 0.154272 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.367 mas, bmaj=4.983 mas, bpa=2.395 degrees
! Estimated noise=0.257991 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285966 Jy
! Component: 100  -  total flux cleaned = 0.00498874 Jy
! Component: 150  -  total flux cleaned = 0.00666581 Jy
! Component: 200  -  total flux cleaned = 0.00801365 Jy
! Total flux subtracted in 200 components = 0.00801365 Jy
! Clean residual min=-0.001720 max=0.001321 Jy/beam
! Clean residual mean=0.000004 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.162285 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000898426 Jy
! Component: 100  -  total flux cleaned = 0.0016238 Jy
! Component: 150  -  total flux cleaned = 0.00227591 Jy
! Component: 200  -  total flux cleaned = 0.00264326 Jy
! Total flux subtracted in 200 components = 0.00264326 Jy
! Clean residual min=-0.001616 max=0.001117 Jy/beam
! Clean residual mean=0.000002 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.164928 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 168 components and 0.164928 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.28 mas, bmaj=3.319 mas, bpa=12.31 degrees
! Estimated noise=0.239892 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000172037 Jy
! Component: 100  -  total flux cleaned = 0.000350915 Jy
! Component: 150  -  total flux cleaned = 0.000568479 Jy
! Component: 200  -  total flux cleaned = 0.000721236 Jy
! Total flux subtracted in 200 components = 0.000721236 Jy
! Clean residual min=-0.001309 max=0.001119 Jy/beam
! Clean residual mean=0.000001 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.16565 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 191 components and 0.16565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073378Jy  sigma=1.330606
! Fit after  self-cal, rms=0.073364Jy  sigma=1.330520
wmodel /J0015-1807_X_map.mod
! wmodel: Unable to open new model file: /J0015-1807_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0015-1807_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.28 x 3.319 at 12.31 degrees (North through East)
! Clean map  min=-0.0012659  max=0.10563 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0015-1807_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.105628 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000294621 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.836771 0.836771 1.67354 3.34708 6.69417 13.3883 26.7767 53.5534
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.105 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  358.52 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0015-1807_X_dfm.log closed on Thu May 19 18:14:42 2016