! Started logfile: /scr/pima/bg219e_uvs/J0011-1434_X_dfm.log on Thu May 19 18:13:59 2016 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /scr/pima/bg219e_uvs/J0011-1434_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J0011-1434_X_uva.fits ! AN table 1: 47 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.886525 visibilities/baseline/integration-bin. ! Found source: J0011-1434 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 18000 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0011-1434_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.007484Jy sigma=22.778946 ! Fit after self-cal, rms=0.914610Jy sigma=20.537447 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9345 mas, bmaj=2.64 mas, bpa=18.29 degrees ! Estimated noise=0.472835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0636284 Jy ! Component: 100 - total flux cleaned = 0.0846078 Jy ! Total flux subtracted in 100 components = 0.0846078 Jy ! Clean residual min=-0.007764 max=0.018559 Jy/beam ! Clean residual mean=0.000020 rms=0.002492 Jy/beam ! Combined flux in latest and established models = 0.0846078 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0846078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083730Jy sigma=1.678905 ! Fit after self-cal, rms=0.082847Jy sigma=1.663119 ! Inverting map ! Added new window around map position (-1.6, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196355 Jy ! Component: 100 - total flux cleaned = 0.0301246 Jy ! Total flux subtracted in 100 components = 0.0301246 Jy ! Clean residual min=-0.006455 max=0.010070 Jy/beam ! Clean residual mean=0.000012 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.114732 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.114732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077296Jy sigma=1.500159 ! Fit after self-cal, rms=0.076359Jy sigma=1.476707 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116343 Jy ! Component: 100 - total flux cleaned = 0.0170544 Jy ! Total flux subtracted in 100 components = 0.0170544 Jy ! Clean residual min=-0.005194 max=0.005020 Jy/beam ! Clean residual mean=0.000007 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.131787 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 42 components and 0.131787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074539Jy sigma=1.423350 ! Fit after self-cal, rms=0.074164Jy sigma=1.413554 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618407 Jy ! Component: 100 - total flux cleaned = 0.0087764 Jy ! Total flux subtracted in 100 components = 0.0087764 Jy ! Clean residual min=-0.004128 max=0.003801 Jy/beam ! Clean residual mean=0.000004 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.140563 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.140563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073700Jy sigma=1.400919 ! Fit after self-cal, rms=0.073592Jy sigma=1.397923 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.198 mas, bmaj=3.14 mas, bpa=15.14 degrees ! Estimated noise=0.24276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272105 Jy ! Component: 100 - total flux cleaned = 0.00293557 Jy ! Component: 150 - total flux cleaned = 0.00293047 Jy ! Component: 200 - total flux cleaned = 0.00296366 Jy ! Total flux subtracted in 200 components = 0.00296366 Jy ! Clean residual min=-0.002188 max=0.001817 Jy/beam ! Clean residual mean=0.000004 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.143527 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 59 components and 0.143527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073468Jy sigma=1.395561 ! Fit after self-cal, rms=0.073434Jy sigma=1.394894 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.198 x 3.14 at 15.14 degrees (North through East) ! Clean map min=-0.0018478 max=0.079234 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.92 KP 0.97 ! LA 1.02 NL 1.03 OV 1.01 PT 0.99 ! SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.05 KP 1.01 ! LA 1.00 NL 0.99 OV 1.00 PT 1.01 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.06 KP 1.00 ! LA 0.99 NL 0.96 OV 0.96 PT 0.99 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.08 KP 1.01 ! LA 0.99 NL 1.02 OV 1.03 PT 1.00 ! SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.96 KP 1.00 ! LA 0.97 NL 1.06 OV 1.00 PT 1.02 ! SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.00 KP 0.98 ! LA 1.03 NL 1.03 OV 1.00 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.02 KP 1.05 ! LA 0.98 NL 1.08 OV 0.95 PT 1.07 ! SC 1.09 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.94 KP 0.99 ! LA 1.03 NL 1.02 OV 0.97 PT 0.98 ! SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.00 KP 1.04 ! LA 0.98 NL 0.99 OV 0.94 PT 1.01 ! SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 1.06 KP 0.97 ! LA 0.99 NL 1.00 OV 1.01 PT 1.00 ! SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.09 KP 1.00 ! LA 1.00 NL 1.00 OV 0.98 PT 1.02 ! SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.96 HN 0.87 KP 1.01 ! LA 1.02 NL 0.99 OV 0.96 PT 1.03 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.073434Jy sigma=1.394894 ! Fit after self-cal, rms=0.073834Jy sigma=1.391799 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.2 mas, bmaj=3.145 mas, bpa=15.09 degrees ! Estimated noise=0.242811 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209413 Jy ! Component: 100 - total flux cleaned = 0.000104084 Jy ! Component: 150 - total flux cleaned = 7.29613e-05 Jy ! Component: 200 - total flux cleaned = 1.92499e-05 Jy ! Total flux subtracted in 200 components = 1.92499e-05 Jy ! Clean residual min=-0.001871 max=0.001739 Jy/beam ! Clean residual mean=0.000004 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.143546 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.143546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073785Jy sigma=1.391121 ! Fit after self-cal, rms=0.073793Jy sigma=1.390796 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073793Jy sigma=1.390796 ! Fit after self-cal, rms=0.073932Jy sigma=1.387765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.201 mas, bmaj=3.145 mas, bpa=14.89 degrees ! Estimated noise=0.242354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411298 Jy ! Component: 100 - total flux cleaned = 0.000348665 Jy ! Component: 150 - total flux cleaned = 0.000296856 Jy ! Component: 200 - total flux cleaned = 0.000275777 Jy ! Total flux subtracted in 200 components = 0.000275777 Jy ! Clean residual min=-0.001615 max=0.001431 Jy/beam ! Clean residual mean=0.000000 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.143822 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 0.143822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073899Jy sigma=1.387284 ! Fit after self-cal, rms=0.073901Jy sigma=1.387021 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.54917e-06 Jy ! Component: 100 - total flux cleaned = -2.64841e-05 Jy ! Component: 150 - total flux cleaned = -2.67669e-05 Jy ! Component: 200 - total flux cleaned = -8.13133e-05 Jy ! Total flux subtracted in 200 components = -8.13133e-05 Jy ! Clean residual min=-0.001520 max=0.001432 Jy/beam ! Clean residual mean=0.000000 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.143741 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.143741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073879Jy sigma=1.386727 ! Fit after self-cal, rms=0.073867Jy sigma=1.386593 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073867Jy sigma=1.386593 ! Fit after self-cal, rms=0.073706Jy sigma=1.386562 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.2 mas, bmaj=3.143 mas, bpa=14.88 degrees ! Estimated noise=0.242088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194963 Jy ! Component: 100 - total flux cleaned = 0.00017707 Jy ! Component: 150 - total flux cleaned = 0.000157849 Jy ! Component: 200 - total flux cleaned = 0.000140573 Jy ! Total flux subtracted in 200 components = 0.000140573 Jy ! Clean residual min=-0.001457 max=0.001431 Jy/beam ! Clean residual mean=-0.000000 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.143881 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 84 components and 0.143881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073689Jy sigma=1.386312 ! Fit after self-cal, rms=0.073680Jy sigma=1.386210 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.81378e-05 Jy ! Component: 100 - total flux cleaned = -4.4024e-05 Jy ! Component: 150 - total flux cleaned = -7.41722e-05 Jy ! Component: 200 - total flux cleaned = -0.000115698 Jy ! Total flux subtracted in 200 components = -0.000115698 Jy ! Clean residual min=-0.001402 max=0.001434 Jy/beam ! Clean residual mean=-0.000000 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.143766 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 85 components and 0.143766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073668Jy sigma=1.386043 ! Fit after self-cal, rms=0.073660Jy sigma=1.385963 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073660Jy sigma=1.385963 ! Fit after self-cal, rms=0.073541Jy sigma=1.385952 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.272 mas, bmaj=4.492 mas, bpa=3.621 degrees ! Estimated noise=0.264426 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138971 Jy ! Component: 100 - total flux cleaned = 0.000151953 Jy ! Component: 150 - total flux cleaned = 0.000142285 Jy ! Component: 200 - total flux cleaned = 0.00012177 Jy ! Total flux subtracted in 200 components = 0.00012177 Jy ! Clean residual min=-0.001153 max=0.001281 Jy/beam ! Clean residual mean=-0.000001 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.143887 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 90 components and 0.143887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073536Jy sigma=1.385860 ! Fit after self-cal, rms=0.073524Jy sigma=1.385759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.7617e-05 Jy ! Component: 100 - total flux cleaned = -3.90606e-06 Jy ! Component: 150 - total flux cleaned = -1.84101e-05 Jy ! Component: 200 - total flux cleaned = -3.0373e-05 Jy ! Total flux subtracted in 200 components = -3.0373e-05 Jy ! Clean residual min=-0.001153 max=0.001238 Jy/beam ! Clean residual mean=-0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.143857 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 91 components and 0.143857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073520Jy sigma=1.385708 ! Fit after self-cal, rms=0.073514Jy sigma=1.385643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.199 mas, bmaj=3.142 mas, bpa=14.87 degrees ! Estimated noise=0.242004 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.199 x 3.142 at 14.87 degrees (North through East) ! Clean map min=-0.0012236 max=0.078087 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9368 mas, bmaj=2.624 mas, bpa=17.77 degrees ! Estimated noise=0.468368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670707 Jy ! Component: 100 - total flux cleaned = 0.0971661 Jy ! Component: 150 - total flux cleaned = 0.11393 Jy ! Component: 200 - total flux cleaned = 0.123911 Jy ! Total flux subtracted in 200 components = 0.123911 Jy ! Clean residual min=-0.003650 max=0.005148 Jy/beam ! Clean residual mean=0.000005 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.123911 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.123911 Jy ! Inverting map and beam ! Estimated beam: bmin=1.199 mas, bmaj=3.142 mas, bpa=14.87 degrees ! Estimated noise=0.242004 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00840866 Jy ! Component: 100 - total flux cleaned = 0.0129446 Jy ! Component: 150 - total flux cleaned = 0.0156579 Jy ! Component: 200 - total flux cleaned = 0.0173573 Jy ! Total flux subtracted in 200 components = 0.0173573 Jy ! Clean residual min=-0.001349 max=0.001440 Jy/beam ! Clean residual mean=0.000001 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.141269 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 42 components and 0.141268 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.272 mas, bmaj=4.492 mas, bpa=3.621 degrees ! Estimated noise=0.264426 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142798 Jy ! Component: 100 - total flux cleaned = 0.00220629 Jy ! Component: 150 - total flux cleaned = 0.0025268 Jy ! Component: 200 - total flux cleaned = 0.0026083 Jy ! Total flux subtracted in 200 components = 0.0026083 Jy ! Clean residual min=-0.001183 max=0.001145 Jy/beam ! Clean residual mean=-0.000001 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.143877 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.6976e-05 Jy ! Component: 100 - total flux cleaned = 0.00011342 Jy ! Component: 150 - total flux cleaned = 0.000121274 Jy ! Component: 200 - total flux cleaned = 0.000113823 Jy ! Total flux subtracted in 200 components = 0.000113823 Jy ! Clean residual min=-0.001168 max=0.001146 Jy/beam ! Clean residual mean=-0.000001 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.143991 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 66 components and 0.143991 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.199 mas, bmaj=3.142 mas, bpa=14.87 degrees ! Estimated noise=0.242004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137879 Jy ! Component: 100 - total flux cleaned = -0.000102284 Jy ! Component: 150 - total flux cleaned = -7.04775e-05 Jy ! Component: 200 - total flux cleaned = -8.56093e-05 Jy ! Total flux subtracted in 200 components = -8.56093e-05 Jy ! Clean residual min=-0.001345 max=0.001319 Jy/beam ! Clean residual mean=-0.000000 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.143905 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.143905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073521Jy sigma=1.385605 ! Fit after self-cal, rms=0.073520Jy sigma=1.385459 wmodel /J0011-1434_X_map.mod ! wmodel: Unable to open new model file: /J0011-1434_X_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219e_uvs/J0011-1434_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.199 x 3.142 at 14.87 degrees (North through East) ! Clean map min=-0.001238 max=0.077637 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0011-1434_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0776374 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000331265 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.28005 1.28005 2.56009 5.12018 10.2404 20.4807 40.9614 81.9229 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.077 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 234.366 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J0011-1434_X_dfm.log closed on Thu May 19 18:14:02 2016