! Started logfile: /scr/pima/bg219e_uvs/J0010+4412_X_dfm.log on Thu May 19 18:13:34 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0010+4412_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0010+4412_X_uva.fits
! AN table 1: 48 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.920139 visibilities/baseline/integration-bin.
! Found source: J0010+4412
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19080 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0010+4412_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012473Jy  sigma=24.284847
! Fit after  self-cal, rms=0.900298Jy  sigma=21.576088
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.049 mas, bmaj=1.644 mas, bpa=50.57 degrees
! Estimated noise=0.506006 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0756667 Jy
! Component: 100  -  total flux cleaned = 0.0963505 Jy
! Total flux subtracted in 100 components = 0.0963505 Jy
! Clean residual min=-0.006071 max=0.019120 Jy/beam
! Clean residual mean=0.000064 rms=0.001789 Jy/beam
! Combined flux in latest and established models = 0.0963505 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0963505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065916Jy  sigma=1.510620
! Fit after  self-cal, rms=0.065685Jy  sigma=1.505125
! Inverting map 
! Added new window around map position (0.4, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165758 Jy
! Component: 100  -  total flux cleaned = 0.0248968 Jy
! Total flux subtracted in 100 components = 0.0248968 Jy
! Clean residual min=-0.004123 max=0.005535 Jy/beam
! Clean residual mean=0.000027 rms=0.001055 Jy/beam
! Combined flux in latest and established models = 0.121247 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.121247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061021Jy  sigma=1.381206
! Fit after  self-cal, rms=0.060645Jy  sigma=1.372215
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0064881 Jy
! Component: 100  -  total flux cleaned = 0.0101972 Jy
! Total flux subtracted in 100 components = 0.0101972 Jy
! Clean residual min=-0.003415 max=0.003529 Jy/beam
! Clean residual mean=0.000013 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.131445 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 23 components and 0.131445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059887Jy  sigma=1.351588
! Fit after  self-cal, rms=0.059832Jy  sigma=1.350398
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.387 mas, bmaj=1.827 mas, bpa=50.76 degrees
! Estimated noise=0.218148 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00360189 Jy
! Component: 100  -  total flux cleaned = 0.0054655 Jy
! Component: 150  -  total flux cleaned = 0.00666701 Jy
! Component: 200  -  total flux cleaned = 0.00749781 Jy
! Total flux subtracted in 200 components = 0.00749781 Jy
! Clean residual min=-0.001637 max=0.001621 Jy/beam
! Clean residual mean=0.000004 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.138942 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 40 components and 0.138942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059621Jy  sigma=1.344737
! Fit after  self-cal, rms=0.059598Jy  sigma=1.344145
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.387 x 1.827 at 50.76 degrees (North through East)
! Clean map  min=-0.0015124  max=0.098254 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        1.06     KP        0.98     
!   LA        0.96     NL        1.02     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        1.01     
!   LA        0.99     NL        1.01     OV        1.00     PT        1.00     
!   SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.97     KP        1.02     
!   LA        0.98     NL        0.98     OV        1.03     PT        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.96     KP        0.99     
!   LA        0.98     NL        1.04     OV        0.96     PT        1.02     
!   SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.00     KP        0.98     
!   LA        0.97     NL        1.03     OV        1.01     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.02     KP        0.96     
!   LA        0.99     NL        1.01     OV        0.96     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.02     KP        1.01     
!   LA        0.92     NL        1.03     OV        0.97     PT        1.05     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.04     KP        1.00     
!   LA        1.02     NL        1.01     OV        0.98     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.03     KP        0.99     
!   LA        1.01     NL        1.00     OV        0.97     PT        0.96     
!   SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.96     KP        1.02     
!   LA        0.98     NL        1.01     OV        0.99     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.99     
!   LA        0.97     NL        1.00     OV        0.98     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.95     KP        1.00     
!   LA        0.96     NL        1.00     OV        1.00     PT        1.05     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.059598Jy  sigma=1.344145
! Fit after  self-cal, rms=0.059420Jy  sigma=1.341051
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.39 mas, bmaj=1.829 mas, bpa=50.7 degrees
! Estimated noise=0.217599 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.39007e-05 Jy
! Component: 100  -  total flux cleaned = -0.000156308 Jy
! Component: 150  -  total flux cleaned = -0.000243605 Jy
! Component: 200  -  total flux cleaned = -0.00025881 Jy
! Total flux subtracted in 200 components = -0.00025881 Jy
! Clean residual min=-0.001405 max=0.001473 Jy/beam
! Clean residual mean=0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.138684 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 47 components and 0.138684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059404Jy  sigma=1.340638
! Fit after  self-cal, rms=0.059409Jy  sigma=1.340460
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059409Jy  sigma=1.340460
! Fit after  self-cal, rms=0.059423Jy  sigma=1.338601
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.392 mas, bmaj=1.83 mas, bpa=50.93 degrees
! Estimated noise=0.217367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000276244 Jy
! Component: 100  -  total flux cleaned = -0.000328594 Jy
! Component: 150  -  total flux cleaned = -0.000328514 Jy
! Component: 200  -  total flux cleaned = -0.000355338 Jy
! Total flux subtracted in 200 components = -0.000355338 Jy
! Clean residual min=-0.001352 max=0.001436 Jy/beam
! Clean residual mean=0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.138328 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 51 components and 0.138328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059414Jy  sigma=1.338387
! Fit after  self-cal, rms=0.059418Jy  sigma=1.338316
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-19.4, -9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000805644 Jy
! Component: 100  -  total flux cleaned = 0.000945909 Jy
! Component: 150  -  total flux cleaned = 0.00100353 Jy
! Component: 200  -  total flux cleaned = 0.00107277 Jy
! Total flux subtracted in 200 components = 0.00107277 Jy
! Clean residual min=-0.001260 max=0.001152 Jy/beam
! Clean residual mean=0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.139401 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 70 components and 0.139401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059391Jy  sigma=1.337696
! Fit after  self-cal, rms=0.059389Jy  sigma=1.337660
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059389Jy  sigma=1.337660
! Fit after  self-cal, rms=0.059317Jy  sigma=1.337625
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.394 mas, bmaj=1.83 mas, bpa=51 degrees
! Estimated noise=0.217011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000106774 Jy
! Component: 100  -  total flux cleaned = 0.000122876 Jy
! Component: 150  -  total flux cleaned = 0.000137663 Jy
! Component: 200  -  total flux cleaned = 0.000137971 Jy
! Total flux subtracted in 200 components = 0.000137971 Jy
! Clean residual min=-0.001229 max=0.001139 Jy/beam
! Clean residual mean=0.000001 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.139539 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 78 components and 0.139539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059309Jy  sigma=1.337460
! Fit after  self-cal, rms=0.059309Jy  sigma=1.337450
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.59943e-05 Jy
! Component: 100  -  total flux cleaned = 4.32814e-05 Jy
! Component: 150  -  total flux cleaned = 3.17403e-05 Jy
! Component: 200  -  total flux cleaned = 2.0748e-05 Jy
! Total flux subtracted in 200 components = 2.0748e-05 Jy
! Clean residual min=-0.001223 max=0.001129 Jy/beam
! Clean residual mean=0.000001 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.13956 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 84 components and 0.13956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059304Jy  sigma=1.337351
! Fit after  self-cal, rms=0.059304Jy  sigma=1.337344
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059304Jy  sigma=1.337344
! Fit after  self-cal, rms=0.059271Jy  sigma=1.337333
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.404 mas, bmaj=2.523 mas, bpa=-54.6 degrees
! Estimated noise=0.243636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111712 Jy
! Component: 100  -  total flux cleaned = -0.000147313 Jy
! Component: 150  -  total flux cleaned = -0.000173516 Jy
! Component: 200  -  total flux cleaned = -0.000181589 Jy
! Total flux subtracted in 200 components = -0.000181589 Jy
! Clean residual min=-0.001387 max=0.001262 Jy/beam
! Clean residual mean=0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.139378 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 99 components and 0.139378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059271Jy  sigma=1.337302
! Fit after  self-cal, rms=0.059269Jy  sigma=1.337273
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.13566e-05 Jy
! Component: 100  -  total flux cleaned = -3.34539e-05 Jy
! Component: 150  -  total flux cleaned = -4.06813e-05 Jy
! Component: 200  -  total flux cleaned = -4.0655e-05 Jy
! Total flux subtracted in 200 components = -4.0655e-05 Jy
! Clean residual min=-0.001374 max=0.001235 Jy/beam
! Clean residual mean=0.000001 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.139337 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 105 components and 0.139337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059269Jy  sigma=1.337252
! Fit after  self-cal, rms=0.059267Jy  sigma=1.337239
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.395 mas, bmaj=1.83 mas, bpa=51.06 degrees
! Estimated noise=0.216796 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.395 x 1.83 at 51.06 degrees (North through East)
! Clean map  min=-0.001212  max=0.097452 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.053 mas, bmaj=1.647 mas, bpa=50.75 degrees
! Estimated noise=0.504814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0754184 Jy
! Component: 100  -  total flux cleaned = 0.101227 Jy
! Component: 150  -  total flux cleaned = 0.114046 Jy
! Component: 200  -  total flux cleaned = 0.121615 Jy
! Total flux subtracted in 200 components = 0.121615 Jy
! Clean residual min=-0.003387 max=0.004238 Jy/beam
! Clean residual mean=0.000023 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.121615 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.121615 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.395 mas, bmaj=1.83 mas, bpa=51.06 degrees
! Estimated noise=0.216796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00682176 Jy
! Component: 100  -  total flux cleaned = 0.010441 Jy
! Component: 150  -  total flux cleaned = 0.0126558 Jy
! Component: 200  -  total flux cleaned = 0.0142184 Jy
! Total flux subtracted in 200 components = 0.0142184 Jy
! Clean residual min=-0.001514 max=0.001419 Jy/beam
! Clean residual mean=0.000004 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.135833 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 51 components and 0.135833 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.404 mas, bmaj=2.523 mas, bpa=-54.6 degrees
! Estimated noise=0.243636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144974 Jy
! Component: 100  -  total flux cleaned = 0.00223719 Jy
! Component: 150  -  total flux cleaned = 0.00261332 Jy
! Component: 200  -  total flux cleaned = 0.00289597 Jy
! Total flux subtracted in 200 components = 0.00289597 Jy
! Clean residual min=-0.001396 max=0.001216 Jy/beam
! Clean residual mean=0.000002 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.138729 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149232 Jy
! Component: 100  -  total flux cleaned = 0.000285263 Jy
! Component: 150  -  total flux cleaned = 0.000401072 Jy
! Component: 200  -  total flux cleaned = 0.000456113 Jy
! Total flux subtracted in 200 components = 0.000456113 Jy
! Clean residual min=-0.001339 max=0.001255 Jy/beam
! Clean residual mean=0.000001 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.139185 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 82 components and 0.139185 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.395 mas, bmaj=1.83 mas, bpa=51.06 degrees
! Estimated noise=0.216796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.26056e-05 Jy
! Component: 100  -  total flux cleaned = 1.88835e-05 Jy
! Component: 150  -  total flux cleaned = 5.54522e-05 Jy
! Component: 200  -  total flux cleaned = 7.21567e-05 Jy
! Total flux subtracted in 200 components = 7.21567e-05 Jy
! Clean residual min=-0.001360 max=0.001242 Jy/beam
! Clean residual mean=0.000000 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.139258 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 95 components and 0.139258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059291Jy  sigma=1.337663
! Fit after  self-cal, rms=0.059286Jy  sigma=1.337614
wmodel /J0010+4412_X_map.mod
! wmodel: Unable to open new model file: /J0010+4412_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0010+4412_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.395 x 1.83 at 51.06 degrees (North through East)
! Clean map  min=-0.0012852  max=0.097425 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0010+4412_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.097425 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000287892 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.886504 0.886504 1.77301 3.54602 7.09203 14.1841 28.3681 56.7363
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.097 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  338.407 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0010+4412_X_dfm.log closed on Thu May 19 18:13:37 2016