! Started logfile: /scr/pima/bg219e_uvs/J0003-1927_X_uvs.log on Thu Apr  7 08:53:08 2016
obs /scr/pima/bg219e_uvs/J0003-1927_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0003-1927_X_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.841821 visibilities/baseline/integration-bin.
! Found source: J0003-1927
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13092 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0003-1927_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.005918Jy  sigma=23.015262
! Fit after  self-cal, rms=0.932849Jy  sigma=21.280015
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8886 mas, bmaj=2.784 mas, bpa=19.02 degrees
! Estimated noise=0.685694 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0510461 Jy
! Component: 100  -  total flux cleaned = 0.0645178 Jy
! Total flux subtracted in 100 components = 0.0645178 Jy
! Clean residual min=-0.005212 max=0.008069 Jy/beam
! Clean residual mean=0.000012 rms=0.001413 Jy/beam
! Combined flux in latest and established models = 0.0645178 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0645178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068228Jy  sigma=1.429629
! Fit after  self-cal, rms=0.066668Jy  sigma=1.395169
! Inverting map 
! Added new window around map position (-1.6, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00995531 Jy
! Component: 100  -  total flux cleaned = 0.0161812 Jy
! Total flux subtracted in 100 components = 0.0161812 Jy
! Clean residual min=-0.004607 max=0.004796 Jy/beam
! Clean residual mean=0.000007 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.080699 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.080699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064751Jy  sigma=1.343378
! Fit after  self-cal, rms=0.064608Jy  sigma=1.340026
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.18 mas, bmaj=3.233 mas, bpa=17.92 degrees
! Estimated noise=0.389881 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00662408 Jy
! Component: 100  -  total flux cleaned = 0.0100281 Jy
! Component: 150  -  total flux cleaned = 0.0120446 Jy
! Component: 200  -  total flux cleaned = 0.0133296 Jy
! Total flux subtracted in 200 components = 0.0133296 Jy
! Clean residual min=-0.002610 max=0.002894 Jy/beam
! Clean residual mean=0.000006 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.0940286 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 36 components and 0.0940286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063965Jy  sigma=1.323085
! Fit after  self-cal, rms=0.063895Jy  sigma=1.321547
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.18 x 3.233 at 17.92 degrees (North through East)
! Clean map  min=-0.0024457  max=0.06794 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.93     KP        0.97     
!   LA        0.97     NL        1.06     OV        1.01     PT        1.00     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.03     KP        0.97     
!   LA        1.04     NL        1.05     OV        0.95     PT        0.99     
!   SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.07     HN        0.89     KP        1.00     
!   LA        0.87     NL        1.06     OV        1.04     PT        1.02     
!   SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.04     HN        0.96     KP        0.95     
!   LA        0.99     NL        1.11     OV        1.07     PT        0.97     
!   SC        0.99     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.94     KP        0.98     
!   LA        0.93     NL        1.04     OV        1.07     PT        0.99     
!   SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        0.87     KP        0.93     
!   LA        0.94     NL        1.08     OV        1.01     PT        1.05     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.87     KP        0.97     
!   LA        0.98     NL        0.97     OV        1.03     PT        1.01     
!   SC        0.94     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063895Jy  sigma=1.321547
! Fit after  self-cal, rms=0.062079Jy  sigma=1.316786
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.176 mas, bmaj=3.208 mas, bpa=17.7 degrees
! Estimated noise=0.386073 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107043 Jy
! Component: 100  -  total flux cleaned = 0.00106914 Jy
! Component: 150  -  total flux cleaned = 0.00104234 Jy
! Component: 200  -  total flux cleaned = 0.00101908 Jy
! Total flux subtracted in 200 components = 0.00101908 Jy
! Clean residual min=-0.002225 max=0.002530 Jy/beam
! Clean residual mean=0.000003 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.0950477 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 47 components and 0.0950477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062039Jy  sigma=1.316019
! Fit after  self-cal, rms=0.062026Jy  sigma=1.315619
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062026Jy  sigma=1.315619
! Fit after  self-cal, rms=0.061909Jy  sigma=1.313498
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.173 mas, bmaj=3.199 mas, bpa=17.66 degrees
! Estimated noise=0.386421 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000795663 Jy
! Component: 100  -  total flux cleaned = 0.000821999 Jy
! Component: 150  -  total flux cleaned = 0.000862438 Jy
! Component: 200  -  total flux cleaned = 0.000898325 Jy
! Total flux subtracted in 200 components = 0.000898325 Jy
! Clean residual min=-0.002183 max=0.002422 Jy/beam
! Clean residual mean=0.000002 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.095946 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 59 components and 0.095946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061884Jy  sigma=1.313022
! Fit after  self-cal, rms=0.061887Jy  sigma=1.312859
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17.4, -38.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191368 Jy
! Component: 100  -  total flux cleaned = 0.00254019 Jy
! Component: 150  -  total flux cleaned = 0.00282575 Jy
! Component: 200  -  total flux cleaned = 0.00311351 Jy
! Total flux subtracted in 200 components = 0.00311351 Jy
! Clean residual min=-0.001983 max=0.002272 Jy/beam
! Clean residual mean=0.000001 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.0990595 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 79 components and 0.0990595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061793Jy  sigma=1.310822
! Fit after  self-cal, rms=0.061797Jy  sigma=1.310614
! Inverting map 
! Added new window around map position (-18, 30.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022278 Jy
! Component: 100  -  total flux cleaned = 0.00244618 Jy
! Component: 150  -  total flux cleaned = 0.00244854 Jy
! Component: 200  -  total flux cleaned = 0.00241365 Jy
! Total flux subtracted in 200 components = 0.00241365 Jy
! Clean residual min=-0.001905 max=0.001902 Jy/beam
! Clean residual mean=0.000002 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.101473 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 101 components and 0.101473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061698Jy  sigma=1.308351
! Fit after  self-cal, rms=0.061695Jy  sigma=1.308125
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061695Jy  sigma=1.308125
! Fit after  self-cal, rms=0.061812Jy  sigma=1.307738
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.171 mas, bmaj=3.186 mas, bpa=17.6 degrees
! Estimated noise=0.386115 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104224 Jy
! Component: 100  -  total flux cleaned = 0.00126833 Jy
! Component: 150  -  total flux cleaned = 0.00140626 Jy
! Component: 200  -  total flux cleaned = 0.00146995 Jy
! Total flux subtracted in 200 components = 0.00146995 Jy
! Clean residual min=-0.001825 max=0.001698 Jy/beam
! Clean residual mean=0.000002 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.102943 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 111 components and 0.102943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061766Jy  sigma=1.306809
! Fit after  self-cal, rms=0.061774Jy  sigma=1.306743
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000217155 Jy
! Component: 100  -  total flux cleaned = 0.000185403 Jy
! Component: 150  -  total flux cleaned = 0.00021466 Jy
! Component: 200  -  total flux cleaned = 0.000242395 Jy
! Total flux subtracted in 200 components = 0.000242395 Jy
! Clean residual min=-0.001796 max=0.001648 Jy/beam
! Clean residual mean=0.000002 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.103185 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 117 components and 0.103185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061745Jy  sigma=1.306192
! Fit after  self-cal, rms=0.061749Jy  sigma=1.306173
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061749Jy  sigma=1.306173
! Fit after  self-cal, rms=0.061794Jy  sigma=1.306099
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.361 mas, bmaj=4.745 mas, bpa=7.406 degrees
! Estimated noise=0.439821 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000491189 Jy
! Component: 100  -  total flux cleaned = 0.000644879 Jy
! Component: 150  -  total flux cleaned = 0.000689751 Jy
! Component: 200  -  total flux cleaned = 0.000689789 Jy
! Total flux subtracted in 200 components = 0.000689789 Jy
! Clean residual min=-0.001751 max=0.001611 Jy/beam
! Clean residual mean=0.000004 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.103875 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 137 components and 0.103875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061780Jy  sigma=1.305812
! Fit after  self-cal, rms=0.061777Jy  sigma=1.305783
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.66395e-06 Jy
! Component: 100  -  total flux cleaned = 3.58631e-05 Jy
! Component: 150  -  total flux cleaned = 3.56611e-05 Jy
! Component: 200  -  total flux cleaned = 3.54828e-05 Jy
! Total flux subtracted in 200 components = 3.54828e-05 Jy
! Clean residual min=-0.001740 max=0.001569 Jy/beam
! Clean residual mean=0.000004 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.103911 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 147 components and 0.103911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061767Jy  sigma=1.305594
! Fit after  self-cal, rms=0.061766Jy  sigma=1.305580
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.17 mas, bmaj=3.18 mas, bpa=17.59 degrees
! Estimated noise=0.386659 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.17 x 3.18 at 17.59 degrees (North through East)
! Clean map  min=-0.0017179  max=0.067015 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.888 mas, bmaj=2.731 mas, bpa=18.53 degrees
! Estimated noise=0.671907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0505253 Jy
! Component: 100  -  total flux cleaned = 0.0666464 Jy
! Component: 150  -  total flux cleaned = 0.0766589 Jy
! Component: 200  -  total flux cleaned = 0.0832909 Jy
! Total flux subtracted in 200 components = 0.0832909 Jy
! Clean residual min=-0.004158 max=0.004836 Jy/beam
! Clean residual mean=0.000005 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.0832909 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0832909 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.17 mas, bmaj=3.18 mas, bpa=17.59 degrees
! Estimated noise=0.386659 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00641823 Jy
! Component: 100  -  total flux cleaned = 0.0102389 Jy
! Component: 150  -  total flux cleaned = 0.0130472 Jy
! Component: 200  -  total flux cleaned = 0.0149039 Jy
! Total flux subtracted in 200 components = 0.0149039 Jy
! Clean residual min=-0.002296 max=0.001884 Jy/beam
! Clean residual mean=0.000005 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.0981948 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 44 components and 0.0981948 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.361 mas, bmaj=4.745 mas, bpa=7.406 degrees
! Estimated noise=0.439821 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208996 Jy
! Component: 100  -  total flux cleaned = 0.00320119 Jy
! Component: 150  -  total flux cleaned = 0.00391527 Jy
! Component: 200  -  total flux cleaned = 0.00440029 Jy
! Total flux subtracted in 200 components = 0.00440029 Jy
! Clean residual min=-0.001979 max=0.001697 Jy/beam
! Clean residual mean=0.000005 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.102595 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00013265 Jy
! Component: 100  -  total flux cleaned = 0.000283776 Jy
! Component: 150  -  total flux cleaned = 0.000367325 Jy
! Component: 200  -  total flux cleaned = 0.000420323 Jy
! Total flux subtracted in 200 components = 0.000420323 Jy
! Clean residual min=-0.001889 max=0.001611 Jy/beam
! Clean residual mean=0.000005 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.103015 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 94 components and 0.103015 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.17 mas, bmaj=3.18 mas, bpa=17.59 degrees
! Estimated noise=0.386659 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.12233e-05 Jy
! Component: 100  -  total flux cleaned = 0.000108514 Jy
! Component: 150  -  total flux cleaned = 0.000189901 Jy
! Component: 200  -  total flux cleaned = 0.000263484 Jy
! Total flux subtracted in 200 components = 0.000263484 Jy
! Clean residual min=-0.001782 max=0.001587 Jy/beam
! Clean residual mean=0.000003 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.103279 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 106 components and 0.103279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061826Jy  sigma=1.306500
! Fit after  self-cal, rms=0.061826Jy  sigma=1.306208
wmodel /scr/pima/bg219e_uvs/J0003-1927_X_map.mod
! Writing 106 model components to file: /scr/pima/bg219e_uvs/J0003-1927_X_map.mod
wobs /scr/pima/bg219e_uvs/J0003-1927_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0003-1927_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J0003-1927_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219e_uvs/J0003-1927_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000783514 Jy
! Component: 100  -  total flux cleaned = -0.00118517 Jy
! Component: 150  -  total flux cleaned = -0.00145673 Jy
! Component: 200  -  total flux cleaned = -0.00169159 Jy
! Component: 250  -  total flux cleaned = -0.00184225 Jy
! Component: 300  -  total flux cleaned = -0.00198812 Jy
! Component: 350  -  total flux cleaned = -0.0021761 Jy
! Component: 400  -  total flux cleaned = -0.00228943 Jy
! Component: 450  -  total flux cleaned = -0.00240059 Jy
! Component: 500  -  total flux cleaned = -0.00261665 Jy
! Component: 550  -  total flux cleaned = -0.00274288 Jy
! Component: 600  -  total flux cleaned = -0.00288686 Jy
! Component: 650  -  total flux cleaned = -0.00294732 Jy
! Component: 700  -  total flux cleaned = -0.0031057 Jy
! Component: 750  -  total flux cleaned = -0.00314459 Jy
! Component: 800  -  total flux cleaned = -0.00323995 Jy
! Component: 850  -  total flux cleaned = -0.00333369 Jy
! Component: 900  -  total flux cleaned = -0.00337079 Jy
! Component: 950  -  total flux cleaned = -0.00347988 Jy
! Component: 1000  -  total flux cleaned = -0.00362219 Jy
! Component: 1050  -  total flux cleaned = -0.00364006 Jy
! Component: 1100  -  total flux cleaned = -0.00374413 Jy
! Component: 1150  -  total flux cleaned = -0.00381222 Jy
! Component: 1200  -  total flux cleaned = -0.00391307 Jy
! Component: 1250  -  total flux cleaned = -0.00397937 Jy
! Component: 1300  -  total flux cleaned = -0.00406147 Jy
! Component: 1350  -  total flux cleaned = -0.00417471 Jy
! Component: 1400  -  total flux cleaned = -0.00422272 Jy
! Component: 1450  -  total flux cleaned = -0.00433278 Jy
! Component: 1500  -  total flux cleaned = -0.00444147 Jy
! Component: 1550  -  total flux cleaned = -0.00448713 Jy
! Component: 1600  -  total flux cleaned = -0.00456264 Jy
! Component: 1650  -  total flux cleaned = -0.00459267 Jy
! Component: 1700  -  total flux cleaned = -0.00469609 Jy
! Component: 1750  -  total flux cleaned = -0.00471067 Jy
! Component: 1800  -  total flux cleaned = -0.00473929 Jy
! Component: 1850  -  total flux cleaned = -0.00481063 Jy
! Component: 1900  -  total flux cleaned = -0.00482462 Jy
! Component: 1950  -  total flux cleaned = -0.0048667 Jy
! Component: 2000  -  total flux cleaned = -0.00489436 Jy
! Component: 2050  -  total flux cleaned = -0.00497652 Jy
! Component: 2100  -  total flux cleaned = -0.00498999 Jy
! Component: 2150  -  total flux cleaned = -0.00500343 Jy
! Component: 2200  -  total flux cleaned = -0.00502998 Jy
! Component: 2250  -  total flux cleaned = -0.00506929 Jy
! Component: 2300  -  total flux cleaned = -0.00505608 Jy
! Component: 2350  -  total flux cleaned = -0.00505608 Jy
! Component: 2400  -  total flux cleaned = -0.00504339 Jy
! Component: 2450  -  total flux cleaned = -0.00505625 Jy
! Component: 2500  -  total flux cleaned = -0.00506878 Jy
! Component: 2550  -  total flux cleaned = -0.00508112 Jy
! Component: 2600  -  total flux cleaned = -0.00509338 Jy
! Component: 2650  -  total flux cleaned = -0.00510554 Jy
! Component: 2700  -  total flux cleaned = -0.00509342 Jy
! Component: 2750  -  total flux cleaned = -0.00506932 Jy
! Component: 2800  -  total flux cleaned = -0.00510515 Jy
! Component: 2850  -  total flux cleaned = -0.00508144 Jy
! Component: 2900  -  total flux cleaned = -0.00510509 Jy
! Component: 2950  -  total flux cleaned = -0.00504658 Jy
! Component: 3000  -  total flux cleaned = -0.00504663 Jy
! Component: 3050  -  total flux cleaned = -0.00500034 Jy
! Component: 3100  -  total flux cleaned = -0.00493149 Jy
! Component: 3150  -  total flux cleaned = -0.00489758 Jy
! Component: 3200  -  total flux cleaned = -0.00489766 Jy
! Component: 3250  -  total flux cleaned = -0.00487529 Jy
! Component: 3300  -  total flux cleaned = -0.0048641 Jy
! Component: 3350  -  total flux cleaned = -0.00483078 Jy
! Component: 3400  -  total flux cleaned = -0.00478667 Jy
! Component: 3450  -  total flux cleaned = -0.00474284 Jy
! Component: 3500  -  total flux cleaned = -0.00471023 Jy
! Component: 3550  -  total flux cleaned = -0.0046671 Jy
! Component: 3600  -  total flux cleaned = -0.00464541 Jy
! Component: 3650  -  total flux cleaned = -0.00454929 Jy
! Component: 3700  -  total flux cleaned = -0.00457063 Jy
! Component: 3750  -  total flux cleaned = -0.00454948 Jy
! Component: 3800  -  total flux cleaned = -0.00447606 Jy
! Component: 3850  -  total flux cleaned = -0.0044552 Jy
! Component: 3900  -  total flux cleaned = -0.0044137 Jy
! Component: 3950  -  total flux cleaned = -0.00439311 Jy
! Component: 4000  -  total flux cleaned = -0.00437259 Jy
! Component: 4050  -  total flux cleaned = -0.00434198 Jy
! Total flux subtracted in 4096 components = -0.00430127 Jy
! Clean residual min=-0.000629 max=0.000543 Jy/beam
! Clean residual mean=0.000000 rms=0.000177 Jy/beam
! Combined flux in latest and established models = 0.0989777 Jy
keep
! Adding 261 model components to the UV plane model.
! The established model now contains 367 components and 0.0989777 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0003-1927_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.17 x 3.18 at 17.59 degrees (North through East)
! Clean map  min=-0.0014179  max=0.066229 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0003-1927_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.066229 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000172927 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.783314 0.783314 1.56663 3.13326 6.26651 12.533 25.0661 50.1321
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.066 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  382.988 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0003-1927_X_uvs.log closed on Thu Apr  7 08:53:12 2016