! Started logfile: /scr/pima/bg219d_uvs/J0458+0608_X_uvs.log on Thu Apr  7 06:39:43 2016
obs /scr/pima/bg219d_uvs/J0458+0608_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219d_uvs/J0458+0608_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.762963 visibilities/baseline/integration-bin.
! Found source: J0458+0608
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17304 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219d_uvs/J0458+0608_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.015838Jy  sigma=25.198224
! Fit after  self-cal, rms=0.819726Jy  sigma=20.348461
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8423 mas, bmaj=1.741 mas, bpa=-0.9296 degrees
! Estimated noise=0.467902 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.136746 Jy
! Component: 100  -  total flux cleaned = 0.171114 Jy
! Total flux subtracted in 100 components = 0.171114 Jy
! Clean residual min=-0.007536 max=0.017694 Jy/beam
! Clean residual mean=-0.000026 rms=0.002175 Jy/beam
! Combined flux in latest and established models = 0.171114 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.171114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069097Jy  sigma=1.646976
! Fit after  self-cal, rms=0.069030Jy  sigma=1.646020
! Inverting map 
! Added new window around map position (3.8, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0189086 Jy
! Component: 100  -  total flux cleaned = 0.0310171 Jy
! Total flux subtracted in 100 components = 0.0310171 Jy
! Clean residual min=-0.005425 max=0.006494 Jy/beam
! Clean residual mean=-0.000018 rms=0.001359 Jy/beam
! Combined flux in latest and established models = 0.202131 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.202131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062532Jy  sigma=1.472782
! Fit after  self-cal, rms=0.062351Jy  sigma=1.467979
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0088496 Jy
! Component: 100  -  total flux cleaned = 0.0148893 Jy
! Total flux subtracted in 100 components = 0.0148893 Jy
! Clean residual min=-0.004772 max=0.005307 Jy/beam
! Clean residual mean=-0.000014 rms=0.001106 Jy/beam
! Combined flux in latest and established models = 0.21702 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.21702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060548Jy  sigma=1.419838
! Fit after  self-cal, rms=0.060517Jy  sigma=1.418781
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.02 mas, bmaj=1.985 mas, bpa=0.0927 degrees
! Estimated noise=0.301944 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00754602 Jy
! Component: 100  -  total flux cleaned = 0.0128414 Jy
! Component: 150  -  total flux cleaned = 0.0166712 Jy
! Component: 200  -  total flux cleaned = 0.0195151 Jy
! Total flux subtracted in 200 components = 0.0195151 Jy
! Clean residual min=-0.004346 max=0.006381 Jy/beam
! Clean residual mean=-0.000011 rms=0.001069 Jy/beam
! Combined flux in latest and established models = 0.236535 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 55 components and 0.236535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059321Jy  sigma=1.387691
! Fit after  self-cal, rms=0.059294Jy  sigma=1.386512
! Inverting map 
! Added new window around map position (-2, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00557005 Jy
! Component: 100  -  total flux cleaned = 0.00892193 Jy
! Component: 150  -  total flux cleaned = 0.0114744 Jy
! Component: 200  -  total flux cleaned = 0.013518 Jy
! Total flux subtracted in 200 components = 0.013518 Jy
! Clean residual min=-0.003312 max=0.004470 Jy/beam
! Clean residual mean=-0.000006 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.250053 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 87 components and 0.250053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058681Jy  sigma=1.370351
! Fit after  self-cal, rms=0.058625Jy  sigma=1.368506
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.02 x 1.985 at 0.0927 degrees (North through East)
! Clean map  min=-0.0033576  max=0.1805 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.98     
!   LA        0.98     MK        1.05     NL        1.01     OV        1.02     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.04     OV        1.01     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.97     MK        0.99     NL        1.03     OV        1.04     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        0.98     
!   LA        1.00     MK        0.99     NL        1.01     OV        1.01     
!   PT        0.95     SC        1.01     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.01     KP        0.98     
!   LA        1.01     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        0.99     
!   LA        1.01     MK        0.97     NL        1.02     OV        1.04     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        0.99     KP        1.01     
!   LA        1.02     MK        1.02     NL        1.02     OV        1.01     
!   PT        0.97     SC        0.99     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058625Jy  sigma=1.368506
! Fit after  self-cal, rms=0.058504Jy  sigma=1.360480
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.022 mas, bmaj=1.992 mas, bpa=0.09371 degrees
! Estimated noise=0.302228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000959967 Jy
! Component: 100  -  total flux cleaned = 0.00157362 Jy
! Component: 150  -  total flux cleaned = 0.00206606 Jy
! Component: 200  -  total flux cleaned = 0.00221567 Jy
! Total flux subtracted in 200 components = 0.00221567 Jy
! Clean residual min=-0.002827 max=0.003644 Jy/beam
! Clean residual mean=-0.000002 rms=0.000778 Jy/beam
! Combined flux in latest and established models = 0.252269 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 104 components and 0.252269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058450Jy  sigma=1.359096
! Fit after  self-cal, rms=0.058448Jy  sigma=1.358965
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058448Jy  sigma=1.358965
! Fit after  self-cal, rms=0.058477Jy  sigma=1.354920
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=1.99 mas, bpa=0.1185 degrees
! Estimated noise=0.302582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000731357 Jy
! Component: 100  -  total flux cleaned = 0.000924516 Jy
! Component: 150  -  total flux cleaned = 0.00104552 Jy
! Component: 200  -  total flux cleaned = 0.00115668 Jy
! Total flux subtracted in 200 components = 0.00115668 Jy
! Clean residual min=-0.002734 max=0.003411 Jy/beam
! Clean residual mean=-0.000003 rms=0.000747 Jy/beam
! Combined flux in latest and established models = 0.253426 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 115 components and 0.253425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058450Jy  sigma=1.354262
! Fit after  self-cal, rms=0.058451Jy  sigma=1.354196
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.8, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00355034 Jy
! Component: 100  -  total flux cleaned = 0.00589959 Jy
! Component: 150  -  total flux cleaned = 0.00758008 Jy
! Component: 200  -  total flux cleaned = 0.0088465 Jy
! Total flux subtracted in 200 components = 0.0088465 Jy
! Clean residual min=-0.002543 max=0.002601 Jy/beam
! Clean residual mean=-0.000003 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.262272 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 159 components and 0.262272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058198Jy  sigma=1.347267
! Fit after  self-cal, rms=0.058180Jy  sigma=1.346888
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058180Jy  sigma=1.346888
! Fit after  self-cal, rms=0.058138Jy  sigma=1.346249
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.02 mas, bmaj=1.989 mas, bpa=-0.04399 degrees
! Estimated noise=0.302231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162351 Jy
! Component: 100  -  total flux cleaned = 0.00273759 Jy
! Component: 150  -  total flux cleaned = 0.00363113 Jy
! Component: 200  -  total flux cleaned = 0.00428466 Jy
! Total flux subtracted in 200 components = 0.00428466 Jy
! Clean residual min=-0.002469 max=0.002548 Jy/beam
! Clean residual mean=-0.000002 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.266556 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 168 components and 0.266556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058078Jy  sigma=1.344622
! Fit after  self-cal, rms=0.058074Jy  sigma=1.344533
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (19.6, 19.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.002315 Jy
! Component: 100  -  total flux cleaned = 0.00365071 Jy
! Component: 150  -  total flux cleaned = 0.00466897 Jy
! Component: 200  -  total flux cleaned = 0.00553004 Jy
! Total flux subtracted in 200 components = 0.00553004 Jy
! Clean residual min=-0.002215 max=0.002068 Jy/beam
! Clean residual mean=-0.000002 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.272086 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 187 components and 0.272087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057971Jy  sigma=1.341675
! Fit after  self-cal, rms=0.057967Jy  sigma=1.341576
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057967Jy  sigma=1.341576
! Fit after  self-cal, rms=0.057981Jy  sigma=1.341367
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=3.132 mas, bpa=-1.122 degrees
! Estimated noise=0.365499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163953 Jy
! Component: 100  -  total flux cleaned = 0.0028039 Jy
! Component: 150  -  total flux cleaned = 0.00377911 Jy
! Component: 200  -  total flux cleaned = 0.00446153 Jy
! Total flux subtracted in 200 components = 0.00446153 Jy
! Clean residual min=-0.003075 max=0.002643 Jy/beam
! Clean residual mean=-0.000002 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.276548 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 196 components and 0.276548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057965Jy  sigma=1.340811
! Fit after  self-cal, rms=0.057965Jy  sigma=1.340741
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000679029 Jy
! Component: 100  -  total flux cleaned = 0.0011617 Jy
! Component: 150  -  total flux cleaned = 0.00159744 Jy
! Component: 200  -  total flux cleaned = 0.00187828 Jy
! Total flux subtracted in 200 components = 0.00187828 Jy
! Clean residual min=-0.003025 max=0.002577 Jy/beam
! Clean residual mean=-0.000001 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.278426 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 206 components and 0.278426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057963Jy  sigma=1.340651
! Fit after  self-cal, rms=0.057963Jy  sigma=1.340635
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.019 mas, bmaj=1.989 mas, bpa=-0.09767 degrees
! Estimated noise=0.302115 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.019 x 1.989 at -0.09767 degrees (North through East)
! Clean map  min=-0.002181  max=0.1806 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8412 mas, bmaj=1.742 mas, bpa=-1.122 degrees
! Estimated noise=0.468938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.136727 Jy
! Component: 100  -  total flux cleaned = 0.172553 Jy
! Component: 150  -  total flux cleaned = 0.192571 Jy
! Component: 200  -  total flux cleaned = 0.205574 Jy
! Total flux subtracted in 200 components = 0.205574 Jy
! Clean residual min=-0.005188 max=0.006941 Jy/beam
! Clean residual mean=-0.000016 rms=0.001281 Jy/beam
! Combined flux in latest and established models = 0.205574 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.205574 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.019 mas, bmaj=1.989 mas, bpa=-0.09767 degrees
! Estimated noise=0.302115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114286 Jy
! Component: 100  -  total flux cleaned = 0.0192355 Jy
! Component: 150  -  total flux cleaned = 0.0250925 Jy
! Component: 200  -  total flux cleaned = 0.0296752 Jy
! Total flux subtracted in 200 components = 0.0296752 Jy
! Clean residual min=-0.003529 max=0.003672 Jy/beam
! Clean residual mean=-0.000011 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 0.235249 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 54 components and 0.235249 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=3.132 mas, bpa=-1.122 degrees
! Estimated noise=0.365499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00660032 Jy
! Component: 100  -  total flux cleaned = 0.0116084 Jy
! Component: 150  -  total flux cleaned = 0.0156088 Jy
! Component: 200  -  total flux cleaned = 0.0189926 Jy
! Total flux subtracted in 200 components = 0.0189926 Jy
! Clean residual min=-0.003659 max=0.003019 Jy/beam
! Clean residual mean=-0.000010 rms=0.001032 Jy/beam
! Combined flux in latest and established models = 0.254241 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00291826 Jy
! Component: 100  -  total flux cleaned = 0.00547145 Jy
! Component: 150  -  total flux cleaned = 0.00773304 Jy
! Component: 200  -  total flux cleaned = 0.00974721 Jy
! Total flux subtracted in 200 components = 0.00974721 Jy
! Clean residual min=-0.003294 max=0.002750 Jy/beam
! Clean residual mean=-0.000007 rms=0.000863 Jy/beam
! Combined flux in latest and established models = 0.263989 Jy
! Adding 104 model components to the UV plane model.
! The established model now contains 150 components and 0.263989 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.019 mas, bmaj=1.989 mas, bpa=-0.09767 degrees
! Estimated noise=0.302115 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217418 Jy
! Component: 100  -  total flux cleaned = 0.00340925 Jy
! Component: 150  -  total flux cleaned = 0.0045081 Jy
! Component: 200  -  total flux cleaned = 0.00551839 Jy
! Total flux subtracted in 200 components = 0.00551839 Jy
! Clean residual min=-0.002383 max=0.002194 Jy/beam
! Clean residual mean=-0.000003 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.269507 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 173 components and 0.269507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058068Jy  sigma=1.343086
! Fit after  self-cal, rms=0.058060Jy  sigma=1.342766
wmodel /scr/pima/bg219d_uvs/J0458+0608_X_map.mod
! Writing 173 model components to file: /scr/pima/bg219d_uvs/J0458+0608_X_map.mod
wobs /scr/pima/bg219d_uvs/J0458+0608_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219d_uvs/J0458+0608_X_uvs.fits
wwins /scr/pima/bg219d_uvs/J0458+0608_X_map.win
! wwins: Wrote 5 windows to /scr/pima/bg219d_uvs/J0458+0608_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00076932 Jy
! Component: 100  -  total flux cleaned = -0.00119222 Jy
! Component: 150  -  total flux cleaned = -0.00130057 Jy
! Component: 200  -  total flux cleaned = -0.00140335 Jy
! Component: 250  -  total flux cleaned = -0.00140305 Jy
! Component: 300  -  total flux cleaned = -0.00143474 Jy
! Component: 350  -  total flux cleaned = -0.00155761 Jy
! Component: 400  -  total flux cleaned = -0.00170523 Jy
! Component: 450  -  total flux cleaned = -0.00179112 Jy
! Component: 500  -  total flux cleaned = -0.0018477 Jy
! Component: 550  -  total flux cleaned = -0.00184778 Jy
! Component: 600  -  total flux cleaned = -0.00184787 Jy
! Component: 650  -  total flux cleaned = -0.00177128 Jy
! Component: 700  -  total flux cleaned = -0.00177154 Jy
! Component: 750  -  total flux cleaned = -0.00174658 Jy
! Component: 800  -  total flux cleaned = -0.00167447 Jy
! Component: 850  -  total flux cleaned = -0.00169822 Jy
! Component: 900  -  total flux cleaned = -0.00169791 Jy
! Component: 950  -  total flux cleaned = -0.00172054 Jy
! Component: 1000  -  total flux cleaned = -0.00167716 Jy
! Component: 1050  -  total flux cleaned = -0.00167692 Jy
! Component: 1100  -  total flux cleaned = -0.00167648 Jy
! Component: 1150  -  total flux cleaned = -0.0016344 Jy
! Component: 1200  -  total flux cleaned = -0.00157332 Jy
! Component: 1250  -  total flux cleaned = -0.00157291 Jy
! Component: 1300  -  total flux cleaned = -0.00149418 Jy
! Component: 1350  -  total flux cleaned = -0.00141773 Jy
! Component: 1400  -  total flux cleaned = -0.00136082 Jy
! Component: 1450  -  total flux cleaned = -0.00128683 Jy
! Component: 1500  -  total flux cleaned = -0.00117743 Jy
! Component: 1550  -  total flux cleaned = -0.00114138 Jy
! Component: 1600  -  total flux cleaned = -0.00105231 Jy
! Component: 1650  -  total flux cleaned = -0.000999851 Jy
! Component: 1700  -  total flux cleaned = -0.000999735 Jy
! Component: 1750  -  total flux cleaned = -0.000914645 Jy
! Component: 1800  -  total flux cleaned = -0.000881075 Jy
! Component: 1850  -  total flux cleaned = -0.000864809 Jy
! Component: 1900  -  total flux cleaned = -0.000815869 Jy
! Component: 1950  -  total flux cleaned = -0.000783963 Jy
! Component: 2000  -  total flux cleaned = -0.000784041 Jy
! Component: 2050  -  total flux cleaned = -0.000752333 Jy
! Component: 2100  -  total flux cleaned = -0.000752437 Jy
! Component: 2150  -  total flux cleaned = -0.000721874 Jy
! Component: 2200  -  total flux cleaned = -0.000706886 Jy
! Component: 2250  -  total flux cleaned = -0.000752284 Jy
! Component: 2300  -  total flux cleaned = -0.000767114 Jy
! Component: 2350  -  total flux cleaned = -0.000752322 Jy
! Component: 2400  -  total flux cleaned = -0.000737646 Jy
! Component: 2450  -  total flux cleaned = -0.000766708 Jy
! Component: 2500  -  total flux cleaned = -0.000781464 Jy
! Component: 2550  -  total flux cleaned = -0.000809659 Jy
! Component: 2600  -  total flux cleaned = -0.000851556 Jy
! Component: 2650  -  total flux cleaned = -0.000865359 Jy
! Component: 2700  -  total flux cleaned = -0.000865301 Jy
! Component: 2750  -  total flux cleaned = -0.000810884 Jy
! Component: 2800  -  total flux cleaned = -0.000851427 Jy
! Component: 2850  -  total flux cleaned = -0.000824547 Jy
! Component: 2900  -  total flux cleaned = -0.000837821 Jy
! Component: 2950  -  total flux cleaned = -0.000837778 Jy
! Component: 3000  -  total flux cleaned = -0.000876994 Jy
! Component: 3050  -  total flux cleaned = -0.000902755 Jy
! Component: 3100  -  total flux cleaned = -0.000890034 Jy
! Component: 3150  -  total flux cleaned = -0.000902869 Jy
! Component: 3200  -  total flux cleaned = -0.000877612 Jy
! Component: 3250  -  total flux cleaned = -0.000940333 Jy
! Component: 3300  -  total flux cleaned = -0.0009403 Jy
! Component: 3350  -  total flux cleaned = -0.000915698 Jy
! Component: 3400  -  total flux cleaned = -0.000940151 Jy
! Component: 3450  -  total flux cleaned = -0.000903635 Jy
! Component: 3500  -  total flux cleaned = -0.000927652 Jy
! Component: 3550  -  total flux cleaned = -0.000939595 Jy
! Component: 3600  -  total flux cleaned = -0.000880336 Jy
! Component: 3650  -  total flux cleaned = -0.000915829 Jy
! Component: 3700  -  total flux cleaned = -0.000939282 Jy
! Component: 3750  -  total flux cleaned = -0.0009277 Jy
! Component: 3800  -  total flux cleaned = -0.000962192 Jy
! Component: 3850  -  total flux cleaned = -0.000927705 Jy
! Component: 3900  -  total flux cleaned = -0.000939074 Jy
! Component: 3950  -  total flux cleaned = -0.000961651 Jy
! Component: 4000  -  total flux cleaned = -0.000950433 Jy
! Component: 4050  -  total flux cleaned = -0.000995139 Jy
! Total flux subtracted in 4096 components = -0.00100638 Jy
! Clean residual min=-0.000766 max=0.000587 Jy/beam
! Clean residual mean=-0.000001 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.268501 Jy
keep
! Adding 322 model components to the UV plane model.
! The established model now contains 495 components and 0.2685 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219d_uvs/J0458+0608_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.019 x 1.989 at -0.09767 degrees (North through East)
! Clean map  min=-0.0012165  max=0.18013 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219d_uvs/J0458+0608_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.180128 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000187249 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.31186 0.31186 0.62372 1.24744 2.49488 4.98976 9.97951 19.959 39.9181 79.8361
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.18 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  961.97 
quit
! Quitting program
! Log file /scr/pima/bg219d_uvs/J0458+0608_X_uvs.log closed on Thu Apr  7 06:39:47 2016