! Started logfile: /scr/pima/bg219d_uvs/J0144+2705_X_dfm.log on Thu May 19 17:24:06 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219d_uvs/J0144+2705_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219d_uvs/J0144+2705_X_uva.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.876437 visibilities/baseline/integration-bin.
! Found source: J0144+2705
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21960 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0144+2705_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.040929Jy  sigma=26.371159
! Fit after  self-cal, rms=0.703304Jy  sigma=17.837848
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9505 mas, bmaj=1.934 mas, bpa=21.51 degrees
! Estimated noise=0.432863 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.228016 Jy
! Component: 100  -  total flux cleaned = 0.277837 Jy
! Total flux subtracted in 100 components = 0.277837 Jy
! Clean residual min=-0.005567 max=0.014640 Jy/beam
! Clean residual mean=-0.000003 rms=0.001705 Jy/beam
! Combined flux in latest and established models = 0.277837 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.277837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064334Jy  sigma=1.568249
! Fit after  self-cal, rms=0.064323Jy  sigma=1.567956
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0150895 Jy
! Component: 100  -  total flux cleaned = 0.0228422 Jy
! Total flux subtracted in 100 components = 0.0228422 Jy
! Clean residual min=-0.004459 max=0.006194 Jy/beam
! Clean residual mean=-0.000004 rms=0.001173 Jy/beam
! Combined flux in latest and established models = 0.300679 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 15 components and 0.300679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059159Jy  sigma=1.429855
! Fit after  self-cal, rms=0.059111Jy  sigma=1.428898
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.232 mas, bmaj=2.146 mas, bpa=16.97 degrees
! Estimated noise=0.197765 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00988462 Jy
! Component: 100  -  total flux cleaned = 0.0157933 Jy
! Component: 150  -  total flux cleaned = 0.0200977 Jy
! Component: 200  -  total flux cleaned = 0.023416 Jy
! Total flux subtracted in 200 components = 0.023416 Jy
! Clean residual min=-0.004530 max=0.006525 Jy/beam
! Clean residual mean=-0.000010 rms=0.001262 Jy/beam
! Combined flux in latest and established models = 0.324095 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 49 components and 0.324095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057215Jy  sigma=1.378867
! Fit after  self-cal, rms=0.057093Jy  sigma=1.375719
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.232 x 2.146 at 16.97 degrees (North through East)
! Clean map  min=-0.0043124  max=0.29635 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.98     NL        1.03     OV        1.01     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.04     KP        0.98     
!   LA        0.99     NL        1.03     OV        0.99     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.98     NL        1.02     OV        0.99     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        0.99     
!   LA        0.98     NL        1.03     OV        1.00     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.97     
!   LA        0.99     NL        1.02     OV        1.00     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.99     KP        0.99     
!   LA        0.98     NL        1.02     OV        1.00     PT        0.98     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.03     KP        0.98     
!   LA        0.99     NL        1.01     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.97     NL        1.03     OV        0.98     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.00     KP        0.98     
!   LA        0.97     NL        1.03     OV        1.01     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.98     NL        1.01     OV        1.00     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.98     NL        1.01     OV        1.01     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.99     NL        1.02     OV        0.99     PT        0.98     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.057093Jy  sigma=1.375719
! Fit after  self-cal, rms=0.056406Jy  sigma=1.364826
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.231 mas, bmaj=2.153 mas, bpa=17.06 degrees
! Estimated noise=0.19668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000914772 Jy
! Component: 100  -  total flux cleaned = 0.000840465 Jy
! Component: 150  -  total flux cleaned = 0.000950667 Jy
! Component: 200  -  total flux cleaned = 0.000998237 Jy
! Total flux subtracted in 200 components = 0.000998237 Jy
! Clean residual min=-0.004636 max=0.005303 Jy/beam
! Clean residual mean=-0.000009 rms=0.001095 Jy/beam
! Combined flux in latest and established models = 0.325093 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 61 components and 0.325093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056250Jy  sigma=1.360753
! Fit after  self-cal, rms=0.056240Jy  sigma=1.360577
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056240Jy  sigma=1.360577
! Fit after  self-cal, rms=0.055254Jy  sigma=1.327809
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.235 mas, bmaj=2.151 mas, bpa=16.83 degrees
! Estimated noise=0.196698 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127021 Jy
! Component: 100  -  total flux cleaned = 0.00134687 Jy
! Component: 150  -  total flux cleaned = 0.00131751 Jy
! Component: 200  -  total flux cleaned = 0.00134537 Jy
! Total flux subtracted in 200 components = 0.00134537 Jy
! Clean residual min=-0.002279 max=0.003662 Jy/beam
! Clean residual mean=-0.000001 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.326438 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 75 components and 0.326438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055193Jy  sigma=1.326511
! Fit after  self-cal, rms=0.055191Jy  sigma=1.326409
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.2, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00376561 Jy
! Component: 100  -  total flux cleaned = 0.00592592 Jy
! Component: 150  -  total flux cleaned = 0.00717221 Jy
! Component: 200  -  total flux cleaned = 0.00760748 Jy
! Total flux subtracted in 200 components = 0.00760748 Jy
! Clean residual min=-0.001936 max=0.002849 Jy/beam
! Clean residual mean=-0.000003 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.334046 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 114 components and 0.334046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054926Jy  sigma=1.319048
! Fit after  self-cal, rms=0.054910Jy  sigma=1.318688
! Inverting map 
! Added new window around map position (-9.6, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00246496 Jy
! Component: 100  -  total flux cleaned = 0.00393433 Jy
! Component: 150  -  total flux cleaned = 0.00507045 Jy
! Component: 200  -  total flux cleaned = 0.00576774 Jy
! Total flux subtracted in 200 components = 0.00576774 Jy
! Clean residual min=-0.001710 max=0.001746 Jy/beam
! Clean residual mean=-0.000003 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.339814 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 142 components and 0.339814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054780Jy  sigma=1.315191
! Fit after  self-cal, rms=0.054769Jy  sigma=1.314842
! Inverting map 
! Added new window around map position (-14.8, 41.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167375 Jy
! Component: 100  -  total flux cleaned = 0.00271067 Jy
! Component: 150  -  total flux cleaned = 0.0034649 Jy
! Component: 200  -  total flux cleaned = 0.00401375 Jy
! Total flux subtracted in 200 components = 0.00401375 Jy
! Clean residual min=-0.001434 max=0.001366 Jy/beam
! Clean residual mean=-0.000002 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.343827 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 179 components and 0.343827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054701Jy  sigma=1.313062
! Fit after  self-cal, rms=0.054698Jy  sigma=1.313002
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054698Jy  sigma=1.313002
! Fit after  self-cal, rms=0.054551Jy  sigma=1.312416
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.235 mas, bmaj=2.15 mas, bpa=16.8 degrees
! Estimated noise=0.196349 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010028 Jy
! Component: 100  -  total flux cleaned = 0.00180893 Jy
! Component: 150  -  total flux cleaned = 0.00240089 Jy
! Component: 200  -  total flux cleaned = 0.00275662 Jy
! Total flux subtracted in 200 components = 0.00275662 Jy
! Clean residual min=-0.001320 max=0.001142 Jy/beam
! Clean residual mean=-0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.346584 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 209 components and 0.346584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054519Jy  sigma=1.311625
! Fit after  self-cal, rms=0.054517Jy  sigma=1.311598
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00045859 Jy
! Component: 100  -  total flux cleaned = 0.000686104 Jy
! Component: 150  -  total flux cleaned = 0.00083545 Jy
! Component: 200  -  total flux cleaned = 0.0010172 Jy
! Total flux subtracted in 200 components = 0.0010172 Jy
! Clean residual min=-0.001257 max=0.001108 Jy/beam
! Clean residual mean=-0.000001 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.347601 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 224 components and 0.347601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054500Jy  sigma=1.311223
! Fit after  self-cal, rms=0.054500Jy  sigma=1.311215
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054500Jy  sigma=1.311215
! Fit after  self-cal, rms=0.054470Jy  sigma=1.311155
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.28 mas, bmaj=2.771 mas, bpa=-1.807 degrees
! Estimated noise=0.224113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000805023 Jy
! Component: 100  -  total flux cleaned = 0.00131915 Jy
! Component: 150  -  total flux cleaned = 0.00166931 Jy
! Component: 200  -  total flux cleaned = 0.00192479 Jy
! Total flux subtracted in 200 components = 0.00192479 Jy
! Clean residual min=-0.001238 max=0.000957 Jy/beam
! Clean residual mean=-0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.349526 Jy
selfcal
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 259 components and 0.349526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054460Jy  sigma=1.310889
! Fit after  self-cal, rms=0.054458Jy  sigma=1.310868
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251309 Jy
! Component: 100  -  total flux cleaned = 0.000405973 Jy
! Component: 150  -  total flux cleaned = 0.000575747 Jy
! Component: 200  -  total flux cleaned = 0.000718396 Jy
! Total flux subtracted in 200 components = 0.000718396 Jy
! Clean residual min=-0.001215 max=0.000901 Jy/beam
! Clean residual mean=-0.000001 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.350244 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 275 components and 0.350244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054452Jy  sigma=1.310736
! Fit after  self-cal, rms=0.054452Jy  sigma=1.310728
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.235 mas, bmaj=2.149 mas, bpa=16.79 degrees
! Estimated noise=0.19627 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.235 x 2.149 at 16.79 degrees (North through East)
! Clean map  min=-0.0011431  max=0.29464 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9521 mas, bmaj=1.932 mas, bpa=21.31 degrees
! Estimated noise=0.431555 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.227261 Jy
! Component: 100  -  total flux cleaned = 0.277101 Jy
! Component: 150  -  total flux cleaned = 0.292403 Jy
! Component: 200  -  total flux cleaned = 0.301171 Jy
! Total flux subtracted in 200 components = 0.301171 Jy
! Clean residual min=-0.003176 max=0.004520 Jy/beam
! Clean residual mean=0.000002 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.30117 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.30117 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.235 mas, bmaj=2.149 mas, bpa=16.79 degrees
! Estimated noise=0.19627 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00822505 Jy
! Component: 100  -  total flux cleaned = 0.0136652 Jy
! Component: 150  -  total flux cleaned = 0.0179278 Jy
! Component: 200  -  total flux cleaned = 0.0213561 Jy
! Total flux subtracted in 200 components = 0.0213561 Jy
! Clean residual min=-0.002287 max=0.002266 Jy/beam
! Clean residual mean=-0.000002 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.322527 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 62 components and 0.322527 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.28 mas, bmaj=2.771 mas, bpa=-1.807 degrees
! Estimated noise=0.224113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.004522 Jy
! Component: 100  -  total flux cleaned = 0.00789039 Jy
! Component: 150  -  total flux cleaned = 0.0105796 Jy
! Component: 200  -  total flux cleaned = 0.0128351 Jy
! Total flux subtracted in 200 components = 0.0128351 Jy
! Clean residual min=-0.002044 max=0.001858 Jy/beam
! Clean residual mean=-0.000005 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.335362 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019421 Jy
! Component: 100  -  total flux cleaned = 0.00362107 Jy
! Component: 150  -  total flux cleaned = 0.00507966 Jy
! Component: 200  -  total flux cleaned = 0.0063584 Jy
! Total flux subtracted in 200 components = 0.0063584 Jy
! Clean residual min=-0.001540 max=0.001484 Jy/beam
! Clean residual mean=-0.000004 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.34172 Jy
! Adding 120 model components to the UV plane model.
! The established model now contains 161 components and 0.34172 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.235 mas, bmaj=2.149 mas, bpa=16.79 degrees
! Estimated noise=0.19627 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000690955 Jy
! Component: 100  -  total flux cleaned = 0.00145187 Jy
! Component: 150  -  total flux cleaned = 0.00213508 Jy
! Component: 200  -  total flux cleaned = 0.00279094 Jy
! Total flux subtracted in 200 components = 0.00279094 Jy
! Clean residual min=-0.001399 max=0.001169 Jy/beam
! Clean residual mean=-0.000002 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.344511 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 187 components and 0.344511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054498Jy  sigma=1.311773
! Fit after  self-cal, rms=0.054487Jy  sigma=1.311502
wmodel /J0144+2705_X_map.mod
! wmodel: Unable to open new model file: /J0144+2705_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219d_uvs/J0144+2705_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.235 x 2.149 at 16.79 degrees (North through East)
! Clean map  min=-0.0012766  max=0.29516 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219d_uvs/J0144+2705_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.295162 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000283244 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.287886 0.287886 0.575772 1.15154 2.30309 4.60617 9.21235 18.4247 36.8494 73.6988
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.295 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1042.08 
quit
! Quitting program
! Log file /scr/pima/bg219d_uvs/J0144+2705_X_dfm.log closed on Thu May 19 17:24:09 2016