! Started logfile: difmap.log_86 on Sun Jul 31 17:52:13 2016 ![@/tmp/difmap__7596.1] ! Obeying initialization file: /tmp/difmap__7596.1 ![@/home/lpetrov/config/difmap.cnf] device /XW ! Attempting to open device: '/XW' vflags="fb3" integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float taper_size taper_size = 70. integer field_size field_size = 1024 float field_cell field_cell = 0.1 float old_peak float new_peak float flux_cutoff ![Exited script file: /home/lpetrov/config/difmap.cnf] ![@/tmp/difmap__7596.2] ![Exited script file: /tmp/difmap__7596.2] obs J0637+1458_S_uva.fits ! Reading UV FITS file: J0637+1458_S_uva.fits ! AN table 1: 36 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.881173 visibilities/baseline/integration-bin. ! Found source: J0637+1458 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 4568 visibilities. ![Exited script file: /tmp/difmap__7596.1] sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 field_size=1024 field_cell=0.4 taper_size = 20. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.034602Jy sigma=23.056752 ! Fit after self-cal, rms=0.753679Jy sigma=16.790820 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help ! Applying 5 buffered edits. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clrmod true,true clean 200, 0.02 ! Inverting map and beam ! Estimated beam: bmin=3.592 mas, bmaj=8.294 mas, bpa=17.43 degrees ! Estimated noise=0.719768 mJy/beam. ! clean: niter=200 gain=0.02 cutoff=0 ! Component: 050 - total flux cleaned = 0.154779 Jy ! Component: 100 - total flux cleaned = 0.212539 Jy ! Component: 150 - total flux cleaned = 0.241315 Jy ! Component: 200 - total flux cleaned = 0.257406 Jy ! Total flux subtracted in 200 components = 0.257406 Jy ! Clean residual min=-0.008612 max=0.012358 Jy/beam ! Clean residual mean=0.000000 rms=0.002756 Jy/beam ! Combined flux in latest and established models = 0.257406 Jy mapl map,true ! ! Move the cursor into the plot window and press 'H' for help ! Note that 2 components lie outside the plot. clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262449Jy sigma=5.804682 ! Fit after self-cal, rms=0.262449Jy sigma=5.804682 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=3.592 mas, bmaj=8.294 mas, bpa=17.43 degrees ! Estimated noise=0.719768 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0961528 Jy ! Component: 100 - total flux cleaned = 0.154326 Jy ! Component: 150 - total flux cleaned = 0.189545 Jy ! Component: 200 - total flux cleaned = 0.212152 Jy ! Component: 250 - total flux cleaned = 0.228702 Jy ! Component: 300 - total flux cleaned = 0.240991 Jy ! Component: 350 - total flux cleaned = 0.250171 Jy ! Component: 400 - total flux cleaned = 0.257072 Jy ! Component: 450 - total flux cleaned = 0.262279 Jy ! Component: 500 - total flux cleaned = 0.266406 Jy ! Component: 550 - total flux cleaned = 0.269752 Jy ! Component: 600 - total flux cleaned = 0.272488 Jy ! Component: 650 - total flux cleaned = 0.274744 Jy ! Component: 700 - total flux cleaned = 0.276607 Jy ! Component: 750 - total flux cleaned = 0.278152 Jy ! Component: 800 - total flux cleaned = 0.279437 Jy ! Total flux subtracted in 800 components = 0.279437 Jy ! Clean residual min=-0.008127 max=0.011129 Jy/beam ! Clean residual mean=0.000012 rms=0.002500 Jy/beam ! Combined flux in latest and established models = 0.279437 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.279437 Jy ! Inverting map and beam ! Estimated beam: bmin=4.357 mas, bmaj=9.047 mas, bpa=15.54 degrees ! Estimated noise=0.513391 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137758 Jy ! Component: 100 - total flux cleaned = -0.00221103 Jy ! Component: 150 - total flux cleaned = -0.00260448 Jy ! Component: 200 - total flux cleaned = -0.00267556 Jy ! Component: 250 - total flux cleaned = -0.00273949 Jy ! Component: 300 - total flux cleaned = -0.002799 Jy ! Component: 350 - total flux cleaned = -0.00286831 Jy ! Component: 400 - total flux cleaned = -0.00293238 Jy ! Component: 450 - total flux cleaned = -0.00298023 Jy ! Component: 500 - total flux cleaned = -0.00301407 Jy ! Component: 550 - total flux cleaned = -0.00302472 Jy ! Component: 600 - total flux cleaned = -0.00303514 Jy ! Component: 650 - total flux cleaned = -0.00304517 Jy ! Component: 700 - total flux cleaned = -0.00305488 Jy ! Component: 750 - total flux cleaned = -0.00306424 Jy ! Component: 800 - total flux cleaned = -0.00307331 Jy ! Component: 850 - total flux cleaned = -0.00308214 Jy ! Component: 900 - total flux cleaned = -0.00308216 Jy ! Component: 950 - total flux cleaned = -0.00309067 Jy ! Component: 1000 - total flux cleaned = -0.00309067 Jy ! Component: 1050 - total flux cleaned = -0.0030907 Jy ! Component: 1100 - total flux cleaned = -0.00309878 Jy ! Component: 1150 - total flux cleaned = -0.00309884 Jy ! Component: 1200 - total flux cleaned = -0.00309874 Jy ! Total flux subtracted in 1200 components = -0.00309874 Jy ! Clean residual min=-0.008063 max=0.012476 Jy/beam ! Clean residual mean=0.000020 rms=0.003177 Jy/beam ! Combined flux in latest and established models = 0.276339 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.276339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069002Jy sigma=1.499171 ! Fit after self-cal, rms=0.068654Jy sigma=1.492716 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068654Jy sigma=1.492716 ! Fit after self-cal, rms=0.059189Jy sigma=1.274605 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256073Jy sigma=5.804682 ! Fit after self-cal, rms=0.256073Jy sigma=5.804682 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=3.598 mas, bmaj=8.275 mas, bpa=17.43 degrees ! Estimated noise=0.702293 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0937725 Jy ! Component: 100 - total flux cleaned = 0.150512 Jy ! Component: 150 - total flux cleaned = 0.184893 Jy ! Component: 200 - total flux cleaned = 0.207186 Jy ! Component: 250 - total flux cleaned = 0.223529 Jy ! Component: 300 - total flux cleaned = 0.235656 Jy ! Component: 350 - total flux cleaned = 0.244722 Jy ! Component: 400 - total flux cleaned = 0.251515 Jy ! Component: 450 - total flux cleaned = 0.256622 Jy ! Component: 500 - total flux cleaned = 0.260491 Jy ! Component: 550 - total flux cleaned = 0.263463 Jy ! Component: 600 - total flux cleaned = 0.265886 Jy ! Component: 650 - total flux cleaned = 0.267894 Jy ! Component: 700 - total flux cleaned = 0.269563 Jy ! Component: 750 - total flux cleaned = 0.270952 Jy ! Component: 800 - total flux cleaned = 0.272108 Jy ! Total flux subtracted in 800 components = 0.272108 Jy ! Clean residual min=-0.003995 max=0.006468 Jy/beam ! Clean residual mean=-0.000012 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.272108 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.272108 Jy ! Inverting map and beam ! Estimated beam: bmin=4.35 mas, bmaj=8.964 mas, bpa=15.52 degrees ! Estimated noise=0.507771 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154782 Jy ! Component: 100 - total flux cleaned = 0.00267261 Jy ! Component: 150 - total flux cleaned = 0.00355254 Jy ! Component: 200 - total flux cleaned = 0.00425436 Jy ! Component: 250 - total flux cleaned = 0.00481664 Jy ! Component: 300 - total flux cleaned = 0.0052676 Jy ! Component: 350 - total flux cleaned = 0.00562932 Jy ! Component: 400 - total flux cleaned = 0.00579937 Jy ! Component: 450 - total flux cleaned = 0.0058644 Jy ! Component: 500 - total flux cleaned = 0.00593455 Jy ! Component: 550 - total flux cleaned = 0.00599011 Jy ! Component: 600 - total flux cleaned = 0.00604185 Jy ! Component: 650 - total flux cleaned = 0.00609004 Jy ! Component: 700 - total flux cleaned = 0.00613497 Jy ! Component: 750 - total flux cleaned = 0.00617009 Jy ! Component: 800 - total flux cleaned = 0.00620976 Jy ! Component: 850 - total flux cleaned = 0.00624088 Jy ! Component: 900 - total flux cleaned = 0.00624678 Jy ! Component: 950 - total flux cleaned = 0.0062525 Jy ! Component: 1000 - total flux cleaned = 0.00625825 Jy ! Component: 1050 - total flux cleaned = 0.00626961 Jy ! Component: 1100 - total flux cleaned = 0.00626956 Jy ! Component: 1150 - total flux cleaned = 0.00626959 Jy ! Component: 1200 - total flux cleaned = 0.00626405 Jy ! Total flux subtracted in 1200 components = 0.00626405 Jy ! Clean residual min=-0.003834 max=0.005237 Jy/beam ! Clean residual mean=-0.000011 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.278372 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256073Jy sigma=5.804682 ! Fit after self-cal, rms=0.256073Jy sigma=5.804682 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=3.598 mas, bmaj=8.275 mas, bpa=17.43 degrees ! Estimated noise=0.702293 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0937725 Jy ! Component: 100 - total flux cleaned = 0.150512 Jy ! Component: 150 - total flux cleaned = 0.184893 Jy ! Component: 200 - total flux cleaned = 0.207186 Jy ! Component: 250 - total flux cleaned = 0.223529 Jy ! Component: 300 - total flux cleaned = 0.235656 Jy ! Component: 350 - total flux cleaned = 0.244722 Jy ! Component: 400 - total flux cleaned = 0.251515 Jy ! Component: 450 - total flux cleaned = 0.256622 Jy ! Component: 500 - total flux cleaned = 0.260524 Jy ! Component: 550 - total flux cleaned = 0.263704 Jy ! Component: 600 - total flux cleaned = 0.266365 Jy ! Component: 650 - total flux cleaned = 0.268644 Jy ! Component: 700 - total flux cleaned = 0.270598 Jy ! Component: 750 - total flux cleaned = 0.272278 Jy ! Component: 800 - total flux cleaned = 0.273734 Jy ! Total flux subtracted in 800 components = 0.273734 Jy ! Clean residual min=-0.003995 max=0.004032 Jy/beam ! Clean residual mean=-0.000012 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.273734 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.273734 Jy ! Inverting map and beam ! Estimated beam: bmin=4.35 mas, bmaj=8.964 mas, bpa=15.52 degrees ! Estimated noise=0.507771 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178115 Jy ! Component: 100 - total flux cleaned = 0.0031476 Jy ! Component: 150 - total flux cleaned = 0.00424172 Jy ! Component: 200 - total flux cleaned = 0.00514783 Jy ! Component: 250 - total flux cleaned = 0.00590712 Jy ! Component: 300 - total flux cleaned = 0.00654949 Jy ! Component: 350 - total flux cleaned = 0.00709471 Jy ! Component: 400 - total flux cleaned = 0.00755811 Jy ! Component: 450 - total flux cleaned = 0.00795251 Jy ! Component: 500 - total flux cleaned = 0.00810694 Jy ! Component: 550 - total flux cleaned = 0.00822381 Jy ! Component: 600 - total flux cleaned = 0.00832097 Jy ! Component: 650 - total flux cleaned = 0.0083786 Jy ! Component: 700 - total flux cleaned = 0.00842251 Jy ! Component: 750 - total flux cleaned = 0.0084438 Jy ! Component: 800 - total flux cleaned = 0.0084745 Jy ! Component: 850 - total flux cleaned = 0.00850408 Jy ! Component: 900 - total flux cleaned = 0.00852325 Jy ! Component: 950 - total flux cleaned = 0.00855095 Jy ! Component: 1000 - total flux cleaned = 0.00855993 Jy ! Component: 1050 - total flux cleaned = 0.00856874 Jy ! Component: 1100 - total flux cleaned = 0.00856882 Jy ! Component: 1150 - total flux cleaned = 0.00857717 Jy ! Component: 1200 - total flux cleaned = 0.00857713 Jy ! Total flux subtracted in 1200 components = 0.00857713 Jy ! Clean residual min=-0.003309 max=0.003239 Jy/beam ! Clean residual mean=-0.000010 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.282311 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.35 x 8.964 at 15.52 degrees (North through East) ! Clean map min=-0.0032699 max=0.23982 Jy/beam ! Clean map min=-0.0032699 max=0.24258 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256073Jy sigma=5.804682 ! Fit after self-cal, rms=0.256073Jy sigma=5.804682 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=3.598 mas, bmaj=8.275 mas, bpa=17.43 degrees ! Estimated noise=0.702293 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0937725 Jy ! Component: 100 - total flux cleaned = 0.150512 Jy ! Component: 150 - total flux cleaned = 0.184893 Jy ! Component: 200 - total flux cleaned = 0.207186 Jy ! Component: 250 - total flux cleaned = 0.223529 Jy ! Component: 300 - total flux cleaned = 0.235656 Jy ! Component: 350 - total flux cleaned = 0.244722 Jy ! Component: 400 - total flux cleaned = 0.251515 Jy ! Component: 450 - total flux cleaned = 0.256622 Jy ! Component: 500 - total flux cleaned = 0.260524 Jy ! Component: 550 - total flux cleaned = 0.263704 Jy ! Component: 600 - total flux cleaned = 0.266365 Jy ! Component: 650 - total flux cleaned = 0.268644 Jy ! Component: 700 - total flux cleaned = 0.270598 Jy ! Component: 750 - total flux cleaned = 0.272278 Jy ! Component: 800 - total flux cleaned = 0.273734 Jy ! Total flux subtracted in 800 components = 0.273734 Jy ! Clean residual min=-0.003995 max=0.004032 Jy/beam ! Clean residual mean=-0.000012 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.273734 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.273734 Jy ! Inverting map and beam ! Estimated beam: bmin=4.35 mas, bmaj=8.964 mas, bpa=15.52 degrees ! Estimated noise=0.507771 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178115 Jy ! Component: 100 - total flux cleaned = 0.0031476 Jy ! Component: 150 - total flux cleaned = 0.00424172 Jy ! Component: 200 - total flux cleaned = 0.00514783 Jy ! Component: 250 - total flux cleaned = 0.00590712 Jy ! Component: 300 - total flux cleaned = 0.00654949 Jy ! Component: 350 - total flux cleaned = 0.00709471 Jy ! Component: 400 - total flux cleaned = 0.00755811 Jy ! Component: 450 - total flux cleaned = 0.00795251 Jy ! Component: 500 - total flux cleaned = 0.00810694 Jy ! Component: 550 - total flux cleaned = 0.00822381 Jy ! Component: 600 - total flux cleaned = 0.00832097 Jy ! Component: 650 - total flux cleaned = 0.0083786 Jy ! Component: 700 - total flux cleaned = 0.00842251 Jy ! Component: 750 - total flux cleaned = 0.0084438 Jy ! Component: 800 - total flux cleaned = 0.0084745 Jy ! Component: 850 - total flux cleaned = 0.00850408 Jy ! Component: 900 - total flux cleaned = 0.00852325 Jy ! Component: 950 - total flux cleaned = 0.00855095 Jy ! Component: 1000 - total flux cleaned = 0.00855993 Jy ! Component: 1050 - total flux cleaned = 0.00856874 Jy ! Component: 1100 - total flux cleaned = 0.00856882 Jy ! Component: 1150 - total flux cleaned = 0.00857717 Jy ! Component: 1200 - total flux cleaned = 0.00857713 Jy ! Total flux subtracted in 1200 components = 0.00857713 Jy ! Clean residual min=-0.003309 max=0.003239 Jy/beam ! Clean residual mean=-0.000010 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.282311 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help proj ! Adding 43 model components to the UV plane model. ! The established model now contains 71 components and 0.282311 Jy ! Using default options string "m3" ! Move the cursor into the plot window and press 'H' for help ! Applying 2 buffered edits. uncalib selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058735Jy sigma=1.263505 ! Fit after self-cal, rms=0.058650Jy sigma=1.259953 selfcal true,true,10. ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058650Jy sigma=1.259953 ! Fit after self-cal, rms=0.058303Jy sigma=1.253114 x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map and beam ! Estimated beam: bmin=4.357 mas, bmaj=8.921 mas, bpa=15.39 degrees ! Estimated noise=0.507235 mJy/beam. ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000538045 Jy ! Component: 100 - total flux cleaned = -0.000537187 Jy ! Component: 150 - total flux cleaned = -0.000537489 Jy ! Component: 200 - total flux cleaned = -0.000415595 Jy ! Component: 250 - total flux cleaned = -0.00049425 Jy ! Component: 300 - total flux cleaned = -0.000606434 Jy ! Component: 350 - total flux cleaned = -0.000786377 Jy ! Component: 400 - total flux cleaned = -0.00092401 Jy ! Component: 450 - total flux cleaned = -0.000956697 Jy ! Component: 500 - total flux cleaned = -0.00105209 Jy ! Component: 550 - total flux cleaned = -0.00120699 Jy ! Component: 600 - total flux cleaned = -0.00135705 Jy ! Component: 650 - total flux cleaned = -0.00150368 Jy ! Component: 700 - total flux cleaned = -0.00164716 Jy ! Component: 750 - total flux cleaned = -0.00173142 Jy ! Component: 800 - total flux cleaned = -0.00192273 Jy ! Component: 850 - total flux cleaned = -0.00205649 Jy ! Component: 900 - total flux cleaned = -0.00218727 Jy ! Component: 950 - total flux cleaned = -0.00223845 Jy ! Component: 1000 - total flux cleaned = -0.00241413 Jy ! Component: 1050 - total flux cleaned = -0.00256134 Jy ! Component: 1100 - total flux cleaned = -0.00270594 Jy ! Component: 1150 - total flux cleaned = -0.00284835 Jy ! Component: 1200 - total flux cleaned = -0.0030119 Jy ! Component: 1250 - total flux cleaned = -0.00324098 Jy ! Component: 1300 - total flux cleaned = -0.00337619 Jy ! Component: 1350 - total flux cleaned = -0.00362051 Jy ! Component: 1400 - total flux cleaned = -0.00379504 Jy ! Component: 1450 - total flux cleaned = -0.0040107 Jy ! Component: 1500 - total flux cleaned = -0.00424433 Jy ! Component: 1550 - total flux cleaned = -0.00447422 Jy ! Component: 1600 - total flux cleaned = -0.00468004 Jy ! Component: 1650 - total flux cleaned = -0.00488342 Jy ! Component: 1700 - total flux cleaned = -0.00508341 Jy ! Component: 1750 - total flux cleaned = -0.0053005 Jy ! Component: 1800 - total flux cleaned = -0.00545619 Jy ! Component: 1850 - total flux cleaned = -0.00559063 Jy ! Component: 1900 - total flux cleaned = -0.00581843 Jy ! Component: 1950 - total flux cleaned = -0.0060248 Jy ! Component: 2000 - total flux cleaned = -0.00626565 Jy ! Component: 2050 - total flux cleaned = -0.00637545 Jy ! Component: 2100 - total flux cleaned = -0.00657475 Jy ! Component: 2150 - total flux cleaned = -0.00677156 Jy ! Component: 2200 - total flux cleaned = -0.0069131 Jy ! Component: 2250 - total flux cleaned = -0.00705336 Jy ! Component: 2300 - total flux cleaned = -0.0072438 Jy ! Component: 2350 - total flux cleaned = -0.00739788 Jy ! Component: 2400 - total flux cleaned = -0.0074658 Jy ! Component: 2450 - total flux cleaned = -0.00760035 Jy ! Component: 2500 - total flux cleaned = -0.00774997 Jy ! Component: 2550 - total flux cleaned = -0.00789797 Jy ! Component: 2600 - total flux cleaned = -0.00799563 Jy ! Component: 2650 - total flux cleaned = -0.00806015 Jy ! Component: 2700 - total flux cleaned = -0.00817187 Jy ! Component: 2750 - total flux cleaned = -0.00825102 Jy ! Component: 2800 - total flux cleaned = -0.0083295 Jy ! Component: 2850 - total flux cleaned = -0.00839176 Jy ! Component: 2900 - total flux cleaned = -0.00843802 Jy ! Component: 2950 - total flux cleaned = -0.00849916 Jy ! Component: 3000 - total flux cleaned = -0.00851431 Jy ! Component: 3050 - total flux cleaned = -0.00857434 Jy ! Component: 3100 - total flux cleaned = -0.00863387 Jy ! Component: 3150 - total flux cleaned = -0.00867793 Jy ! Component: 3200 - total flux cleaned = -0.00869251 Jy ! Component: 3250 - total flux cleaned = -0.00873602 Jy ! Component: 3300 - total flux cleaned = -0.008765 Jy ! Component: 3350 - total flux cleaned = -0.00880778 Jy ! Component: 3400 - total flux cleaned = -0.00885035 Jy ! Component: 3450 - total flux cleaned = -0.00892062 Jy ! Component: 3500 - total flux cleaned = -0.00893464 Jy ! Component: 3550 - total flux cleaned = -0.00893486 Jy ! Component: 3600 - total flux cleaned = -0.00897607 Jy ! Component: 3650 - total flux cleaned = -0.00903043 Jy ! Component: 3700 - total flux cleaned = -0.00904381 Jy ! Component: 3750 - total flux cleaned = -0.00904372 Jy ! Component: 3800 - total flux cleaned = -0.00907056 Jy ! Component: 3850 - total flux cleaned = -0.00911021 Jy ! Component: 3900 - total flux cleaned = -0.00912332 Jy ! Component: 3950 - total flux cleaned = -0.00918869 Jy ! Component: 4000 - total flux cleaned = -0.0091109 Jy ! Component: 4050 - total flux cleaned = -0.00916247 Jy ! Total flux subtracted in 4096 components = -0.00914968 Jy ! Clean residual min=-0.000778 max=0.000729 Jy/beam ! Clean residual mean=0.000001 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.273162 Jy levs=0.75,1.5,3.0,6.0,12,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.357 x 8.921 at 15.39 degrees (North through East) ! Clean map min=-0.000778 max=0.24233 Jy/beam ! Clean map min=-0.0019717 max=0.24234 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. save J0637+1458_S ! Writing UV FITS file: J0637+1458_S.uvf ! Writing 361 model components to file: J0637+1458_S.mod ! wwins: Wrote 8 windows to J0637+1458_S.win ! Adding 290 model components to the UV plane model. ! The established model now contains 361 components and 0.273162 Jy ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.357 x 8.921 at 15.39 degrees (North through East) ! Clean map min=-0.0019387 max=0.24233 Jy/beam ! Writing clean map to FITS file: J0637+1458_S.fits ! Writing difmap environment to: J0637+1458_S.par levs=0.4,0.8,1.6,3.2,6.4,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. save J0637+1458_S ! Writing UV FITS file: J0637+1458_S.uvf ! Writing 361 model components to file: J0637+1458_S.mod ! wwins: Wrote 8 windows to J0637+1458_S.win ! Writing clean map to FITS file: J0637+1458_S.fits ! Writing difmap environment to: J0637+1458_S.par quit ! Quitting program ! Log file difmap.log_86 closed on Sun Jul 31 17:53:06 2016