! Started logfile: /scr/pima/bg219b_uvs/J2308+0946_S_dfm.log on Thu May 19 20:40:12 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219b_uvs/J2308+0946_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J2308+0946_S_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.92037 visibilities/baseline/integration-bin.
! Found source: J2308+0946
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7952 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2308+0946_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.063182Jy  sigma=23.898706
! Fit after  self-cal, rms=0.672376Jy  sigma=15.102021
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.796 mas, bmaj=6.948 mas, bpa=-5.357 degrees
! Estimated noise=0.494942 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.254836 Jy
! Component: 100  -  total flux cleaned = 0.310418 Jy
! Total flux subtracted in 100 components = 0.310418 Jy
! Clean residual min=-0.005724 max=0.015842 Jy/beam
! Clean residual mean=0.000011 rms=0.001544 Jy/beam
! Combined flux in latest and established models = 0.310418 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.310418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065609Jy  sigma=1.398709
! Fit after  self-cal, rms=0.065605Jy  sigma=1.398647
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161605 Jy
! Component: 100  -  total flux cleaned = 0.0245882 Jy
! Total flux subtracted in 100 components = 0.0245882 Jy
! Clean residual min=-0.003648 max=0.004548 Jy/beam
! Clean residual mean=0.000004 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 0.335006 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 31 components and 0.335006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061012Jy  sigma=1.290162
! Fit after  self-cal, rms=0.060967Jy  sigma=1.289265
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.35 mas, bmaj=7.422 mas, bpa=-4.675 degrees
! Estimated noise=0.360278 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00689203 Jy
! Component: 100  -  total flux cleaned = 0.0108461 Jy
! Component: 150  -  total flux cleaned = 0.0133951 Jy
! Component: 200  -  total flux cleaned = 0.0150739 Jy
! Total flux subtracted in 200 components = 0.0150739 Jy
! Clean residual min=-0.002821 max=0.002719 Jy/beam
! Clean residual mean=0.000001 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.35008 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 66 components and 0.35008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060141Jy  sigma=1.270210
! Fit after  self-cal, rms=0.060123Jy  sigma=1.269822
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.35 x 7.422 at -4.675 degrees (North through East)
! Clean map  min=-0.0026749  max=0.32741 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.98     KP        1.01     
!   LA        0.97     MK        1.01     NL        1.01     OV        1.01     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        1.01     
!   LA        0.98     MK        1.03     NL        0.99     OV        1.02     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.97     MK        1.02     NL        0.99     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        0.98     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.060123Jy  sigma=1.269822
! Fit after  self-cal, rms=0.059210Jy  sigma=1.252562
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.364 mas, bmaj=7.445 mas, bpa=-4.61 degrees
! Estimated noise=0.360636 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206709 Jy
! Component: 100  -  total flux cleaned = 0.000208256 Jy
! Component: 150  -  total flux cleaned = 0.000157246 Jy
! Component: 200  -  total flux cleaned = 0.000198328 Jy
! Total flux subtracted in 200 components = 0.000198328 Jy
! Clean residual min=-0.002057 max=0.002047 Jy/beam
! Clean residual mean=0.000003 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.350279 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 77 components and 0.350279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059179Jy  sigma=1.251863
! Fit after  self-cal, rms=0.059173Jy  sigma=1.251702
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059173Jy  sigma=1.251702
! Fit after  self-cal, rms=0.058870Jy  sigma=1.245535
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.363 mas, bmaj=7.44 mas, bpa=-4.649 degrees
! Estimated noise=0.360604 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.67772e-05 Jy
! Component: 100  -  total flux cleaned = 1.22487e-05 Jy
! Component: 150  -  total flux cleaned = -4.83081e-07 Jy
! Component: 200  -  total flux cleaned = -1.11061e-05 Jy
! Total flux subtracted in 200 components = -1.11061e-05 Jy
! Clean residual min=-0.002007 max=0.001863 Jy/beam
! Clean residual mean=0.000001 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.350267 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 89 components and 0.350267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058859Jy  sigma=1.245288
! Fit after  self-cal, rms=0.058855Jy  sigma=1.245199
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.48984e-05 Jy
! Component: 100  -  total flux cleaned = 5.22881e-05 Jy
! Component: 150  -  total flux cleaned = 4.30161e-05 Jy
! Component: 200  -  total flux cleaned = 4.29726e-05 Jy
! Total flux subtracted in 200 components = 4.29726e-05 Jy
! Clean residual min=-0.002004 max=0.001854 Jy/beam
! Clean residual mean=0.000001 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.35031 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 96 components and 0.35031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058850Jy  sigma=1.245068
! Fit after  self-cal, rms=0.058847Jy  sigma=1.245023
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058847Jy  sigma=1.245023
! Fit after  self-cal, rms=0.058837Jy  sigma=1.244983
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.364 mas, bmaj=7.439 mas, bpa=-4.609 degrees
! Estimated noise=0.360638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.11043e-05 Jy
! Component: 100  -  total flux cleaned = -3.95449e-05 Jy
! Component: 150  -  total flux cleaned = -5.66082e-05 Jy
! Component: 200  -  total flux cleaned = -7.01759e-05 Jy
! Total flux subtracted in 200 components = -7.01759e-05 Jy
! Clean residual min=-0.001993 max=0.001865 Jy/beam
! Clean residual mean=0.000001 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.35024 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 98 components and 0.35024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058832Jy  sigma=1.244863
! Fit after  self-cal, rms=0.058831Jy  sigma=1.244830
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.98212e-05 Jy
! Component: 100  -  total flux cleaned = 3.81166e-05 Jy
! Component: 150  -  total flux cleaned = 2.47079e-05 Jy
! Component: 200  -  total flux cleaned = 1.92723e-05 Jy
! Total flux subtracted in 200 components = 1.92723e-05 Jy
! Clean residual min=-0.001993 max=0.001858 Jy/beam
! Clean residual mean=0.000001 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.35026 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 99 components and 0.35026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058828Jy  sigma=1.244767
! Fit after  self-cal, rms=0.058827Jy  sigma=1.244748
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058827Jy  sigma=1.244748
! Fit after  self-cal, rms=0.058825Jy  sigma=1.244720
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.313 mas, bmaj=10.97 mas, bpa=-6.939 degrees
! Estimated noise=0.44816 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000256052 Jy
! Component: 100  -  total flux cleaned = 0.000203319 Jy
! Component: 150  -  total flux cleaned = 0.000178673 Jy
! Component: 200  -  total flux cleaned = 0.000173601 Jy
! Total flux subtracted in 200 components = 0.000173601 Jy
! Clean residual min=-0.002245 max=0.002549 Jy/beam
! Clean residual mean=0.000002 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.350433 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 108 components and 0.350433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058826Jy  sigma=1.244668
! Fit after  self-cal, rms=0.058823Jy  sigma=1.244611
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.25455e-05 Jy
! Component: 100  -  total flux cleaned = 7.68767e-06 Jy
! Component: 150  -  total flux cleaned = -7.7428e-06 Jy
! Component: 200  -  total flux cleaned = -1.1535e-05 Jy
! Total flux subtracted in 200 components = -1.1535e-05 Jy
! Clean residual min=-0.002254 max=0.002518 Jy/beam
! Clean residual mean=0.000002 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.350422 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 112 components and 0.350422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058825Jy  sigma=1.244618
! Fit after  self-cal, rms=0.058823Jy  sigma=1.244581
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.366 mas, bmaj=7.438 mas, bpa=-4.577 degrees
! Estimated noise=0.360686 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.366 x 7.438 at -4.577 degrees (North through East)
! Clean map  min=-0.0019302  max=0.327 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.808 mas, bmaj=6.953 mas, bpa=-5.314 degrees
! Estimated noise=0.495351 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.254993 Jy
! Component: 100  -  total flux cleaned = 0.310672 Jy
! Component: 150  -  total flux cleaned = 0.326629 Jy
! Component: 200  -  total flux cleaned = 0.334997 Jy
! Total flux subtracted in 200 components = 0.334997 Jy
! Clean residual min=-0.002901 max=0.004113 Jy/beam
! Clean residual mean=0.000004 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.334997 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.334997 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.366 mas, bmaj=7.438 mas, bpa=-4.577 degrees
! Estimated noise=0.360686 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00630129 Jy
! Component: 100  -  total flux cleaned = 0.00973521 Jy
! Component: 150  -  total flux cleaned = 0.0117695 Jy
! Component: 200  -  total flux cleaned = 0.0130138 Jy
! Total flux subtracted in 200 components = 0.0130138 Jy
! Clean residual min=-0.001978 max=0.001880 Jy/beam
! Clean residual mean=0.000002 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.348011 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 58 components and 0.348011 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.313 mas, bmaj=10.97 mas, bpa=-6.939 degrees
! Estimated noise=0.44816 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120325 Jy
! Component: 100  -  total flux cleaned = 0.00170542 Jy
! Component: 150  -  total flux cleaned = 0.00181763 Jy
! Component: 200  -  total flux cleaned = 0.00186122 Jy
! Total flux subtracted in 200 components = 0.00186122 Jy
! Clean residual min=-0.002227 max=0.002598 Jy/beam
! Clean residual mean=0.000002 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.349872 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.95913e-05 Jy
! Component: 100  -  total flux cleaned = 8.58421e-05 Jy
! Component: 150  -  total flux cleaned = 0.000127286 Jy
! Component: 200  -  total flux cleaned = 0.000157615 Jy
! Total flux subtracted in 200 components = 0.000157615 Jy
! Clean residual min=-0.002234 max=0.002573 Jy/beam
! Clean residual mean=0.000002 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.35003 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.35003 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.366 mas, bmaj=7.438 mas, bpa=-4.577 degrees
! Estimated noise=0.360686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000184998 Jy
! Component: 100  -  total flux cleaned = -7.07685e-05 Jy
! Component: 150  -  total flux cleaned = -1.12758e-05 Jy
! Component: 200  -  total flux cleaned = 5.85169e-06 Jy
! Total flux subtracted in 200 components = 5.85169e-06 Jy
! Clean residual min=-0.001999 max=0.001821 Jy/beam
! Clean residual mean=0.000001 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.350035 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 87 components and 0.350035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058838Jy  sigma=1.244985
! Fit after  self-cal, rms=0.058837Jy  sigma=1.244944
wmodel /J2308+0946_S_map.mod
! wmodel: Unable to open new model file: /J2308+0946_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J2308+0946_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.366 x 7.438 at -4.577 degrees (North through East)
! Clean map  min=-0.0019251  max=0.32725 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2308+0946_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.327253 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000463445 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.424851 0.424851 0.849701 1.6994 3.3988 6.79761 13.5952 27.1904 54.3809
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.327 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  706.13 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J2308+0946_S_dfm.log closed on Thu May 19 20:40:15 2016