! Started logfile: /scr/pima/bg219b_uvs/J2303-1841_X_uvs.log on Thu Apr  7 02:07:28 2016
obs /scr/pima/bg219b_uvs/J2303-1841_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J2303-1841_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.897531 visibilities/baseline/integration-bin.
! Found source: J2303-1841
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17448 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J2303-1841_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.049201Jy  sigma=23.014733
! Fit after  self-cal, rms=0.649199Jy  sigma=14.310916
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6522 mas, bmaj=1.677 mas, bpa=-3.793 degrees
! Estimated noise=0.540379 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.258878 Jy
! Component: 100  -  total flux cleaned = 0.337328 Jy
! Total flux subtracted in 100 components = 0.337328 Jy
! Clean residual min=-0.013615 max=0.056428 Jy/beam
! Clean residual mean=-0.000037 rms=0.004504 Jy/beam
! Combined flux in latest and established models = 0.337328 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.337328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.114122Jy  sigma=2.448137
! Fit after  self-cal, rms=0.113757Jy  sigma=2.441392
! Inverting map 
! Added new window around map position (1.4, 2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0514439 Jy
! Component: 100  -  total flux cleaned = 0.0782287 Jy
! Total flux subtracted in 100 components = 0.0782287 Jy
! Clean residual min=-0.008311 max=0.018016 Jy/beam
! Clean residual mean=-0.000018 rms=0.002274 Jy/beam
! Combined flux in latest and established models = 0.415556 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 0.415556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.079451Jy  sigma=1.665085
! Fit after  self-cal, rms=0.077975Jy  sigma=1.633523
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0189611 Jy
! Component: 100  -  total flux cleaned = 0.0305823 Jy
! Total flux subtracted in 100 components = 0.0305823 Jy
! Clean residual min=-0.005966 max=0.010492 Jy/beam
! Clean residual mean=-0.000009 rms=0.001539 Jy/beam
! Combined flux in latest and established models = 0.446139 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.446139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.070377Jy  sigma=1.453720
! Fit after  self-cal, rms=0.070127Jy  sigma=1.448559
! Inverting map 
! Added new window around map position (5.2, 7.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101087 Jy
! Component: 100  -  total flux cleaned = 0.0175868 Jy
! Total flux subtracted in 100 components = 0.0175868 Jy
! Clean residual min=-0.004886 max=0.007905 Jy/beam
! Clean residual mean=-0.000007 rms=0.001261 Jy/beam
! Combined flux in latest and established models = 0.463726 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 33 components and 0.463726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.067589Jy  sigma=1.389142
! Fit after  self-cal, rms=0.067543Jy  sigma=1.388177
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7976 mas, bmaj=2.039 mas, bpa=-1.786 degrees
! Estimated noise=0.347521 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109688 Jy
! Component: 100  -  total flux cleaned = 0.0183241 Jy
! Component: 150  -  total flux cleaned = 0.0237667 Jy
! Component: 200  -  total flux cleaned = 0.0278323 Jy
! Total flux subtracted in 200 components = 0.0278323 Jy
! Clean residual min=-0.004293 max=0.005866 Jy/beam
! Clean residual mean=-0.000003 rms=0.001106 Jy/beam
! Combined flux in latest and established models = 0.491558 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 66 components and 0.491558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065352Jy  sigma=1.335464
! Fit after  self-cal, rms=0.065283Jy  sigma=1.333467
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7976 x 2.039 at -1.786 degrees (North through East)
! Clean map  min=-0.0040007  max=0.34424 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.07     KP        0.96     
!   LA        0.97     MK        0.97     NL        1.01     OV        0.97     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.07     KP        0.98     
!   LA        0.99     MK        1.02     NL        1.02     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.10     KP        1.01     
!   LA        1.00     MK        1.02     NL        1.05     OV        0.99     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.06     KP        0.98     
!   LA        0.97     MK        0.98     NL        1.00     OV        0.97     
!   PT        0.96     SC        0.99     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.05     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.04     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.07     KP        1.02     
!   LA        1.00     MK        1.01     NL        1.02     OV        0.99     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.02     KP        0.98     
!   LA        0.97     MK        0.98     NL        1.00     OV        0.96     
!   PT        0.98     SC        0.99     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065283Jy  sigma=1.333467
! Fit after  self-cal, rms=0.064011Jy  sigma=1.286304
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8009 mas, bmaj=2.042 mas, bpa=-1.742 degrees
! Estimated noise=0.346756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011498 Jy
! Component: 100  -  total flux cleaned = 0.00101473 Jy
! Component: 150  -  total flux cleaned = 0.00080036 Jy
! Component: 200  -  total flux cleaned = 0.000841492 Jy
! Total flux subtracted in 200 components = 0.000841492 Jy
! Clean residual min=-0.003250 max=0.003074 Jy/beam
! Clean residual mean=0.000004 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.492399 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 79 components and 0.492399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063840Jy  sigma=1.282479
! Fit after  self-cal, rms=0.063850Jy  sigma=1.282284
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063850Jy  sigma=1.282284
! Fit after  self-cal, rms=0.063638Jy  sigma=1.271931
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8006 mas, bmaj=2.04 mas, bpa=-1.836 degrees
! Estimated noise=0.346414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00169538 Jy
! Component: 100  -  total flux cleaned = -0.0017458 Jy
! Component: 150  -  total flux cleaned = -0.00180634 Jy
! Component: 200  -  total flux cleaned = -0.0018331 Jy
! Total flux subtracted in 200 components = -0.0018331 Jy
! Clean residual min=-0.002391 max=0.002638 Jy/beam
! Clean residual mean=-0.000001 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.490566 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 91 components and 0.490566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063584Jy  sigma=1.270469
! Fit after  self-cal, rms=0.063580Jy  sigma=1.270325
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.8, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215208 Jy
! Component: 100  -  total flux cleaned = 0.00237421 Jy
! Component: 150  -  total flux cleaned = 0.00217516 Jy
! Component: 200  -  total flux cleaned = 0.00200086 Jy
! Total flux subtracted in 200 components = 0.00200086 Jy
! Clean residual min=-0.002069 max=0.001974 Jy/beam
! Clean residual mean=-0.000001 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.492567 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 106 components and 0.492567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063490Jy  sigma=1.267925
! Fit after  self-cal, rms=0.063480Jy  sigma=1.267675
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063480Jy  sigma=1.267675
! Fit after  self-cal, rms=0.063595Jy  sigma=1.267049
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8001 mas, bmaj=2.039 mas, bpa=-1.877 degrees
! Estimated noise=0.346238 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000475742 Jy
! Component: 100  -  total flux cleaned = 0.000518786 Jy
! Component: 150  -  total flux cleaned = 0.000454308 Jy
! Component: 200  -  total flux cleaned = 0.00036758 Jy
! Total flux subtracted in 200 components = 0.00036758 Jy
! Clean residual min=-0.001898 max=0.001724 Jy/beam
! Clean residual mean=-0.000002 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.492935 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 115 components and 0.492935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063556Jy  sigma=1.266017
! Fit after  self-cal, rms=0.063556Jy  sigma=1.265963
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188788 Jy
! Component: 100  -  total flux cleaned = 8.66199e-05 Jy
! Component: 150  -  total flux cleaned = 3.98199e-05 Jy
! Component: 200  -  total flux cleaned = -3.17651e-06 Jy
! Total flux subtracted in 200 components = -3.17651e-06 Jy
! Clean residual min=-0.001844 max=0.001693 Jy/beam
! Clean residual mean=-0.000002 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.492931 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 125 components and 0.492932 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063539Jy  sigma=1.265536
! Fit after  self-cal, rms=0.063539Jy  sigma=1.265520
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063539Jy  sigma=1.265520
! Fit after  self-cal, rms=0.063572Jy  sigma=1.265408
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.117 mas, bmaj=4.539 mas, bpa=4.451 degrees
! Estimated noise=0.456334 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000313674 Jy
! Component: 100  -  total flux cleaned = 0.000214607 Jy
! Component: 150  -  total flux cleaned = 9.34049e-05 Jy
! Component: 200  -  total flux cleaned = 2.58616e-05 Jy
! Total flux subtracted in 200 components = 2.58616e-05 Jy
! Clean residual min=-0.001998 max=0.001837 Jy/beam
! Clean residual mean=-0.000004 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.492957 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 135 components and 0.492957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063571Jy  sigma=1.265307
! Fit after  self-cal, rms=0.063569Jy  sigma=1.265271
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214227 Jy
! Component: 100  -  total flux cleaned = 0.00018364 Jy
! Component: 150  -  total flux cleaned = 0.000165711 Jy
! Component: 200  -  total flux cleaned = 0.000148862 Jy
! Total flux subtracted in 200 components = 0.000148862 Jy
! Clean residual min=-0.001951 max=0.001857 Jy/beam
! Clean residual mean=-0.000004 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.493106 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 139 components and 0.493106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063567Jy  sigma=1.265199
! Fit after  self-cal, rms=0.063566Jy  sigma=1.265193
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8 mas, bmaj=2.038 mas, bpa=-1.89 degrees
! Estimated noise=0.346145 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8 x 2.038 at -1.89 degrees (North through East)
! Clean map  min=-0.0016419  max=0.34254 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6532 mas, bmaj=1.674 mas, bpa=-3.851 degrees
! Estimated noise=0.538769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.258029 Jy
! Component: 100  -  total flux cleaned = 0.342475 Jy
! Component: 150  -  total flux cleaned = 0.388837 Jy
! Component: 200  -  total flux cleaned = 0.416083 Jy
! Total flux subtracted in 200 components = 0.416083 Jy
! Clean residual min=-0.006935 max=0.014103 Jy/beam
! Clean residual mean=-0.000013 rms=0.001771 Jy/beam
! Combined flux in latest and established models = 0.416083 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.416083 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8 mas, bmaj=2.038 mas, bpa=-1.89 degrees
! Estimated noise=0.346145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0251468 Jy
! Component: 100  -  total flux cleaned = 0.0392965 Jy
! Component: 150  -  total flux cleaned = 0.0491212 Jy
! Component: 200  -  total flux cleaned = 0.0561691 Jy
! Total flux subtracted in 200 components = 0.0561691 Jy
! Clean residual min=-0.003032 max=0.004229 Jy/beam
! Clean residual mean=-0.000005 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.472253 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 49 components and 0.472253 Jy
! Inverting map 
! Added new window around map position (4.4, 6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0051876 Jy
! Component: 100  -  total flux cleaned = 0.00903545 Jy
! Component: 150  -  total flux cleaned = 0.0119472 Jy
! Component: 200  -  total flux cleaned = 0.0141793 Jy
! Total flux subtracted in 200 components = 0.0141793 Jy
! Clean residual min=-0.002115 max=0.001885 Jy/beam
! Clean residual mean=-0.000003 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.486432 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 79 components and 0.486432 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.117 mas, bmaj=4.539 mas, bpa=4.451 degrees
! Estimated noise=0.456334 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00272434 Jy
! Component: 100  -  total flux cleaned = 0.00425459 Jy
! Component: 150  -  total flux cleaned = 0.00489925 Jy
! Component: 200  -  total flux cleaned = 0.00537765 Jy
! Total flux subtracted in 200 components = 0.00537765 Jy
! Clean residual min=-0.001986 max=0.002012 Jy/beam
! Clean residual mean=-0.000004 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.49181 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000315784 Jy
! Component: 100  -  total flux cleaned = 0.000526146 Jy
! Component: 150  -  total flux cleaned = 0.000631654 Jy
! Component: 200  -  total flux cleaned = 0.00072131 Jy
! Total flux subtracted in 200 components = 0.00072131 Jy
! Clean residual min=-0.001903 max=0.001973 Jy/beam
! Clean residual mean=-0.000004 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.492531 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 120 components and 0.492531 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8 mas, bmaj=2.038 mas, bpa=-1.89 degrees
! Estimated noise=0.346145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.70388e-05 Jy
! Component: 100  -  total flux cleaned = 0.000263692 Jy
! Component: 150  -  total flux cleaned = 0.000443435 Jy
! Component: 200  -  total flux cleaned = 0.00049754 Jy
! Total flux subtracted in 200 components = 0.00049754 Jy
! Clean residual min=-0.001811 max=0.001752 Jy/beam
! Clean residual mean=-0.000002 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.493028 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 141 components and 0.493028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063587Jy  sigma=1.265372
! Fit after  self-cal, rms=0.063576Jy  sigma=1.265196
wmodel /scr/pima/bg219b_uvs/J2303-1841_X_map.mod
! Writing 141 model components to file: /scr/pima/bg219b_uvs/J2303-1841_X_map.mod
wobs /scr/pima/bg219b_uvs/J2303-1841_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J2303-1841_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J2303-1841_X_map.win
! wwins: Wrote 6 windows to /scr/pima/bg219b_uvs/J2303-1841_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000367636 Jy
! Component: 100  -  total flux cleaned = -0.000637849 Jy
! Component: 150  -  total flux cleaned = -0.00072314 Jy
! Component: 200  -  total flux cleaned = -0.000749834 Jy
! Component: 250  -  total flux cleaned = -0.000856336 Jy
! Component: 300  -  total flux cleaned = -0.000882606 Jy
! Component: 350  -  total flux cleaned = -0.000933643 Jy
! Component: 400  -  total flux cleaned = -0.000933162 Jy
! Component: 450  -  total flux cleaned = -0.000860489 Jy
! Component: 500  -  total flux cleaned = -0.000813411 Jy
! Component: 550  -  total flux cleaned = -0.00076797 Jy
! Component: 600  -  total flux cleaned = -0.000745283 Jy
! Component: 650  -  total flux cleaned = -0.0007002 Jy
! Component: 700  -  total flux cleaned = -0.000612201 Jy
! Component: 750  -  total flux cleaned = -0.00054723 Jy
! Component: 800  -  total flux cleaned = -0.00041911 Jy
! Component: 850  -  total flux cleaned = -0.000293146 Jy
! Component: 900  -  total flux cleaned = -0.00018976 Jy
! Component: 950  -  total flux cleaned = -6.75914e-05 Jy
! Component: 1000  -  total flux cleaned = -7.51592e-06 Jy
! Component: 1050  -  total flux cleaned = 3.1929e-05 Jy
! Component: 1100  -  total flux cleaned = 5.13611e-05 Jy
! Component: 1150  -  total flux cleaned = 9.04334e-05 Jy
! Component: 1200  -  total flux cleaned = 0.000204906 Jy
! Component: 1250  -  total flux cleaned = 0.00022361 Jy
! Component: 1300  -  total flux cleaned = 0.000260862 Jy
! Component: 1350  -  total flux cleaned = 0.000334222 Jy
! Component: 1400  -  total flux cleaned = 0.000279665 Jy
! Component: 1450  -  total flux cleaned = 0.000315514 Jy
! Component: 1500  -  total flux cleaned = 0.000315266 Jy
! Component: 1550  -  total flux cleaned = 0.000262418 Jy
! Component: 1600  -  total flux cleaned = 0.000262497 Jy
! Component: 1650  -  total flux cleaned = 0.000262639 Jy
! Component: 1700  -  total flux cleaned = 0.000262461 Jy
! Component: 1750  -  total flux cleaned = 0.000279179 Jy
! Component: 1800  -  total flux cleaned = 0.000262738 Jy
! Component: 1850  -  total flux cleaned = 0.00029592 Jy
! Component: 1900  -  total flux cleaned = 0.000393838 Jy
! Component: 1950  -  total flux cleaned = 0.000442239 Jy
! Component: 2000  -  total flux cleaned = 0.000442471 Jy
! Component: 2050  -  total flux cleaned = 0.000458422 Jy
! Component: 2100  -  total flux cleaned = 0.000521318 Jy
! Component: 2150  -  total flux cleaned = 0.000536822 Jy
! Component: 2200  -  total flux cleaned = 0.000521176 Jy
! Component: 2250  -  total flux cleaned = 0.000521142 Jy
! Component: 2300  -  total flux cleaned = 0.000551657 Jy
! Component: 2350  -  total flux cleaned = 0.00050652 Jy
! Component: 2400  -  total flux cleaned = 0.000580919 Jy
! Component: 2450  -  total flux cleaned = 0.000566148 Jy
! Component: 2500  -  total flux cleaned = 0.000624632 Jy
! Component: 2550  -  total flux cleaned = 0.000653791 Jy
! Component: 2600  -  total flux cleaned = 0.000668151 Jy
! Component: 2650  -  total flux cleaned = 0.000696591 Jy
! Component: 2700  -  total flux cleaned = 0.000710711 Jy
! Component: 2750  -  total flux cleaned = 0.000780968 Jy
! Component: 2800  -  total flux cleaned = 0.000738937 Jy
! Component: 2850  -  total flux cleaned = 0.000752802 Jy
! Component: 2900  -  total flux cleaned = 0.000752848 Jy
! Component: 2950  -  total flux cleaned = 0.000752791 Jy
! Component: 3000  -  total flux cleaned = 0.000834115 Jy
! Component: 3050  -  total flux cleaned = 0.000807279 Jy
! Component: 3100  -  total flux cleaned = 0.000873921 Jy
! Component: 3150  -  total flux cleaned = 0.000887164 Jy
! Component: 3200  -  total flux cleaned = 0.0008609 Jy
! Component: 3250  -  total flux cleaned = 0.000887043 Jy
! Component: 3300  -  total flux cleaned = 0.0009129 Jy
! Component: 3350  -  total flux cleaned = 0.000938637 Jy
! Component: 3400  -  total flux cleaned = 0.000900272 Jy
! Component: 3450  -  total flux cleaned = 0.000912967 Jy
! Component: 3500  -  total flux cleaned = 0.000900381 Jy
! Component: 3550  -  total flux cleaned = 0.000938018 Jy
! Component: 3600  -  total flux cleaned = 0.000888206 Jy
! Component: 3650  -  total flux cleaned = 0.000937693 Jy
! Component: 3700  -  total flux cleaned = 0.000925266 Jy
! Component: 3750  -  total flux cleaned = 0.000888558 Jy
! Component: 3800  -  total flux cleaned = 0.000876575 Jy
! Component: 3850  -  total flux cleaned = 0.00087649 Jy
! Component: 3900  -  total flux cleaned = 0.000924407 Jy
! Component: 3950  -  total flux cleaned = 0.000924378 Jy
! Component: 4000  -  total flux cleaned = 0.00091253 Jy
! Component: 4050  -  total flux cleaned = 0.000947875 Jy
! Total flux subtracted in 4096 components = 0.000912904 Jy
! Clean residual min=-0.000721 max=0.000721 Jy/beam
! Clean residual mean=0.000000 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.493941 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 428 components and 0.493941 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J2303-1841_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8 x 2.038 at -1.89 degrees (North through East)
! Clean map  min=-0.0011538  max=0.34333 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2303-1841_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.343333 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000197345 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.172437 0.172437 0.344875 0.68975 1.3795 2.759 5.518 11.036 22.072 44.144 88.288
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.343 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1739.76 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J2303-1841_X_uvs.log closed on Thu Apr  7 02:07:34 2016