! Started logfile: /scr/pima/bg219b_uvs/J2300+1655_X_uvs.log on Thu Apr  7 02:07:14 2016
obs /scr/pima/bg219b_uvs/J2300+1655_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J2300+1655_X_uva.fits
! AN table 1: 37 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.648649 visibilities/baseline/integration-bin.
! Found source: J2300+1655
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12960 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J2300+1655_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 117 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 117 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 117 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 117 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 117 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 117 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 117 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.064331Jy  sigma=24.509166
! Fit after  self-cal, rms=0.646928Jy  sigma=14.807043
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7841 mas, bmaj=1.614 mas, bpa=-5.653 degrees
! Estimated noise=0.603279 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.262731 Jy
! Component: 100  -  total flux cleaned = 0.335837 Jy
! Total flux subtracted in 100 components = 0.335837 Jy
! Clean residual min=-0.015268 max=0.033123 Jy/beam
! Clean residual mean=-0.000006 rms=0.003649 Jy/beam
! Combined flux in latest and established models = 0.335837 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.335837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.096132Jy  sigma=2.173596
! Fit after  self-cal, rms=0.095957Jy  sigma=2.170645
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.037072 Jy
! Component: 100  -  total flux cleaned = 0.0562699 Jy
! Total flux subtracted in 100 components = 0.0562699 Jy
! Clean residual min=-0.009160 max=0.021576 Jy/beam
! Clean residual mean=-0.000008 rms=0.002321 Jy/beam
! Combined flux in latest and established models = 0.392107 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.392107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.074702Jy  sigma=1.653656
! Fit after  self-cal, rms=0.074598Jy  sigma=1.651904
! Inverting map 
! Added new window around map position (-4, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199646 Jy
! Component: 100  -  total flux cleaned = 0.0313746 Jy
! Total flux subtracted in 100 components = 0.0313746 Jy
! Clean residual min=-0.007278 max=0.016402 Jy/beam
! Clean residual mean=-0.000007 rms=0.001739 Jy/beam
! Combined flux in latest and established models = 0.423482 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 19 components and 0.423482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.067076Jy  sigma=1.479468
! Fit after  self-cal, rms=0.066613Jy  sigma=1.470021
! Inverting map 
! Added new window around map position (-1.4, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149123 Jy
! Component: 100  -  total flux cleaned = 0.0228091 Jy
! Total flux subtracted in 100 components = 0.0228091 Jy
! Clean residual min=-0.005405 max=0.005981 Jy/beam
! Clean residual mean=-0.000006 rms=0.001297 Jy/beam
! Combined flux in latest and established models = 0.446291 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 32 components and 0.446291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061919Jy  sigma=1.364809
! Fit after  self-cal, rms=0.061618Jy  sigma=1.357731
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9611 mas, bmaj=1.864 mas, bpa=-6.028 degrees
! Estimated noise=0.397256 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102814 Jy
! Component: 100  -  total flux cleaned = 0.0169549 Jy
! Component: 150  -  total flux cleaned = 0.0218028 Jy
! Component: 200  -  total flux cleaned = 0.0255749 Jy
! Total flux subtracted in 200 components = 0.0255749 Jy
! Clean residual min=-0.004662 max=0.004832 Jy/beam
! Clean residual mean=-0.000008 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.471866 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 58 components and 0.471866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059491Jy  sigma=1.308570
! Fit after  self-cal, rms=0.059381Jy  sigma=1.305724
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9611 x 1.864 at -6.028 degrees (North through East)
! Clean map  min=-0.0040901  max=0.35435 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.02     KP        0.95     
!   LA        0.98     MK        0.99     NL        1.02     OV        0.97     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.02     KP        0.98     
!   LA        0.99     MK        1.04     NL        1.03     OV        1.02     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.05     KP        1.01     
!   LA        1.01     MK        1.03     NL        1.05     OV        1.01     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.98     KP        0.97     
!   LA        0.97     MK        1.02     NL        1.01     OV        0.98     
!   PT        0.97     SC        1.01     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.97     
!   LA        0.97     MK        1.01     NL        1.03     OV        0.97     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.00     KP        1.01     
!   LA        1.01     MK        1.03     NL        1.03     OV        1.01     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.97     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.97     
!   PT        0.96     SC        1.03     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059381Jy  sigma=1.305724
! Fit after  self-cal, rms=0.057573Jy  sigma=1.261118
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9726 mas, bmaj=1.898 mas, bpa=-7.035 degrees
! Estimated noise=0.39995 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.003132 Jy
! Component: 100  -  total flux cleaned = 0.00338388 Jy
! Component: 150  -  total flux cleaned = 0.00353173 Jy
! Component: 200  -  total flux cleaned = 0.00368786 Jy
! Total flux subtracted in 200 components = 0.00368786 Jy
! Clean residual min=-0.003464 max=0.003465 Jy/beam
! Clean residual mean=-0.000006 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.475554 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 78 components and 0.475554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057368Jy  sigma=1.255773
! Fit after  self-cal, rms=0.057344Jy  sigma=1.255149
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057344Jy  sigma=1.255149
! Fit after  self-cal, rms=0.057033Jy  sigma=1.243970
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9739 mas, bmaj=1.897 mas, bpa=-7.082 degrees
! Estimated noise=0.400258 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.69427e-06 Jy
! Component: 100  -  total flux cleaned = 3.4156e-05 Jy
! Component: 150  -  total flux cleaned = 0.000108274 Jy
! Component: 200  -  total flux cleaned = 0.000238178 Jy
! Total flux subtracted in 200 components = 0.000238178 Jy
! Clean residual min=-0.002381 max=0.003223 Jy/beam
! Clean residual mean=-0.000002 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.475792 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 84 components and 0.475792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056978Jy  sigma=1.242591
! Fit after  self-cal, rms=0.056974Jy  sigma=1.242465
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.6, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00295587 Jy
! Component: 100  -  total flux cleaned = 0.00402654 Jy
! Component: 150  -  total flux cleaned = 0.00454391 Jy
! Component: 200  -  total flux cleaned = 0.00502163 Jy
! Total flux subtracted in 200 components = 0.00502163 Jy
! Clean residual min=-0.002153 max=0.002391 Jy/beam
! Clean residual mean=-0.000001 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.480814 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 102 components and 0.480813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056807Jy  sigma=1.238419
! Fit after  self-cal, rms=0.056801Jy  sigma=1.238290
! Inverting map 
! Added new window around map position (-10.4, -25).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00148695 Jy
! Component: 100  -  total flux cleaned = 0.00178998 Jy
! Component: 150  -  total flux cleaned = 0.00204678 Jy
! Component: 200  -  total flux cleaned = 0.00227889 Jy
! Total flux subtracted in 200 components = 0.00227889 Jy
! Clean residual min=-0.002038 max=0.002261 Jy/beam
! Clean residual mean=-0.000001 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.483092 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 118 components and 0.483092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056694Jy  sigma=1.236077
! Fit after  self-cal, rms=0.056685Jy  sigma=1.235926
! Inverting map 
! Added new window around map position (2.6, 28.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204373 Jy
! Component: 100  -  total flux cleaned = 0.00264295 Jy
! Component: 150  -  total flux cleaned = 0.00264283 Jy
! Component: 200  -  total flux cleaned = 0.00278658 Jy
! Total flux subtracted in 200 components = 0.00278658 Jy
! Clean residual min=-0.002029 max=0.001988 Jy/beam
! Clean residual mean=-0.000002 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.485879 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 134 components and 0.485879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056590Jy  sigma=1.233978
! Fit after  self-cal, rms=0.056586Jy  sigma=1.233906
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056586Jy  sigma=1.233906
! Fit after  self-cal, rms=0.056494Jy  sigma=1.233498
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9746 mas, bmaj=1.898 mas, bpa=-7.083 degrees
! Estimated noise=0.399839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251942 Jy
! Component: 100  -  total flux cleaned = 0.000359003 Jy
! Component: 150  -  total flux cleaned = 0.0004864 Jy
! Component: 200  -  total flux cleaned = 0.000517899 Jy
! Total flux subtracted in 200 components = 0.000517899 Jy
! Clean residual min=-0.001916 max=0.001978 Jy/beam
! Clean residual mean=-0.000001 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.486397 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 144 components and 0.486397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056455Jy  sigma=1.232674
! Fit after  self-cal, rms=0.056453Jy  sigma=1.232639
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.83605e-05 Jy
! Component: 100  -  total flux cleaned = 5.79159e-05 Jy
! Component: 150  -  total flux cleaned = 8.38856e-05 Jy
! Component: 200  -  total flux cleaned = 0.000109268 Jy
! Total flux subtracted in 200 components = 0.000109268 Jy
! Clean residual min=-0.001875 max=0.001991 Jy/beam
! Clean residual mean=-0.000001 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.486506 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 153 components and 0.486506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056428Jy  sigma=1.232154
! Fit after  self-cal, rms=0.056427Jy  sigma=1.232138
! Inverting map 
! Added new window around map position (28.2, -23.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143392 Jy
! Component: 100  -  total flux cleaned = 0.00146917 Jy
! Component: 150  -  total flux cleaned = 0.00156246 Jy
! Component: 200  -  total flux cleaned = 0.00167786 Jy
! Total flux subtracted in 200 components = 0.00167786 Jy
! Clean residual min=-0.001894 max=0.001876 Jy/beam
! Clean residual mean=-0.000002 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.488184 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 170 components and 0.488184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056361Jy  sigma=1.230822
! Fit after  self-cal, rms=0.056357Jy  sigma=1.230712
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056357Jy  sigma=1.230712
! Fit after  self-cal, rms=0.056318Jy  sigma=1.230562
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=2.894 mas, bpa=-6.939 degrees
! Estimated noise=0.491772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000163467 Jy
! Component: 100  -  total flux cleaned = 0.000379041 Jy
! Component: 150  -  total flux cleaned = 0.000539772 Jy
! Component: 200  -  total flux cleaned = 0.000684066 Jy
! Total flux subtracted in 200 components = 0.000684066 Jy
! Clean residual min=-0.001799 max=0.001791 Jy/beam
! Clean residual mean=-0.000003 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.488868 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 187 components and 0.488868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056301Jy  sigma=1.230184
! Fit after  self-cal, rms=0.056300Jy  sigma=1.230143
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205928 Jy
! Component: 100  -  total flux cleaned = 0.000340706 Jy
! Component: 150  -  total flux cleaned = 0.000403745 Jy
! Component: 200  -  total flux cleaned = 0.000423378 Jy
! Total flux subtracted in 200 components = 0.000423378 Jy
! Clean residual min=-0.001787 max=0.001782 Jy/beam
! Clean residual mean=-0.000003 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.489291 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 193 components and 0.489291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056291Jy  sigma=1.229965
! Fit after  self-cal, rms=0.056290Jy  sigma=1.229946
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9749 mas, bmaj=1.898 mas, bpa=-7.08 degrees
! Estimated noise=0.399689 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9749 x 1.898 at -7.08 degrees (North through East)
! Clean map  min=-0.0017208  max=0.35455 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7917 mas, bmaj=1.628 mas, bpa=-6.335 degrees
! Estimated noise=0.598731 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.262722 Jy
! Component: 100  -  total flux cleaned = 0.335626 Jy
! Component: 150  -  total flux cleaned = 0.373744 Jy
! Component: 200  -  total flux cleaned = 0.399347 Jy
! Total flux subtracted in 200 components = 0.399347 Jy
! Clean residual min=-0.007874 max=0.014050 Jy/beam
! Clean residual mean=-0.000003 rms=0.001937 Jy/beam
! Combined flux in latest and established models = 0.399347 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.399347 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9749 mas, bmaj=1.898 mas, bpa=-7.08 degrees
! Estimated noise=0.399689 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0248891 Jy
! Component: 100  -  total flux cleaned = 0.0404391 Jy
! Component: 150  -  total flux cleaned = 0.050626 Jy
! Component: 200  -  total flux cleaned = 0.0575078 Jy
! Total flux subtracted in 200 components = 0.0575078 Jy
! Clean residual min=-0.003154 max=0.003802 Jy/beam
! Clean residual mean=-0.000003 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.456855 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 36 components and 0.456855 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=2.894 mas, bpa=-6.939 degrees
! Estimated noise=0.491772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00750025 Jy
! Component: 100  -  total flux cleaned = 0.012292 Jy
! Component: 150  -  total flux cleaned = 0.0160144 Jy
! Component: 200  -  total flux cleaned = 0.0190138 Jy
! Total flux subtracted in 200 components = 0.0190138 Jy
! Clean residual min=-0.002551 max=0.002579 Jy/beam
! Clean residual mean=-0.000004 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.475868 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00244404 Jy
! Component: 100  -  total flux cleaned = 0.00445704 Jy
! Component: 150  -  total flux cleaned = 0.00581835 Jy
! Component: 200  -  total flux cleaned = 0.0069374 Jy
! Total flux subtracted in 200 components = 0.0069374 Jy
! Clean residual min=-0.002048 max=0.002039 Jy/beam
! Clean residual mean=-0.000004 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.482806 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 96 components and 0.482806 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9749 mas, bmaj=1.898 mas, bpa=-7.08 degrees
! Estimated noise=0.399689 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122876 Jy
! Component: 100  -  total flux cleaned = 0.00219102 Jy
! Component: 150  -  total flux cleaned = 0.00281351 Jy
! Component: 200  -  total flux cleaned = 0.00327186 Jy
! Total flux subtracted in 200 components = 0.00327186 Jy
! Clean residual min=-0.002253 max=0.002194 Jy/beam
! Clean residual mean=-0.000003 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.486078 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 120 components and 0.486078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056613Jy  sigma=1.236943
! Fit after  self-cal, rms=0.056581Jy  sigma=1.236441
wmodel /scr/pima/bg219b_uvs/J2300+1655_X_map.mod
! Writing 120 model components to file: /scr/pima/bg219b_uvs/J2300+1655_X_map.mod
wobs /scr/pima/bg219b_uvs/J2300+1655_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J2300+1655_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J2300+1655_X_map.win
! wwins: Wrote 7 windows to /scr/pima/bg219b_uvs/J2300+1655_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000641586 Jy
! Component: 100  -  total flux cleaned = 0.000974753 Jy
! Component: 150  -  total flux cleaned = 0.00125358 Jy
! Component: 200  -  total flux cleaned = 0.00162107 Jy
! Component: 250  -  total flux cleaned = 0.00200853 Jy
! Component: 300  -  total flux cleaned = 0.0022596 Jy
! Component: 350  -  total flux cleaned = 0.00262669 Jy
! Component: 400  -  total flux cleaned = 0.00283553 Jy
! Component: 450  -  total flux cleaned = 0.00301143 Jy
! Component: 500  -  total flux cleaned = 0.00318376 Jy
! Component: 550  -  total flux cleaned = 0.00332452 Jy
! Component: 600  -  total flux cleaned = 0.00340758 Jy
! Component: 650  -  total flux cleaned = 0.00357073 Jy
! Component: 700  -  total flux cleaned = 0.00375747 Jy
! Component: 750  -  total flux cleaned = 0.0037576 Jy
! Component: 800  -  total flux cleaned = 0.00386187 Jy
! Component: 850  -  total flux cleaned = 0.00401524 Jy
! Component: 900  -  total flux cleaned = 0.00411585 Jy
! Component: 950  -  total flux cleaned = 0.00409141 Jy
! Component: 1000  -  total flux cleaned = 0.00428713 Jy
! Component: 1050  -  total flux cleaned = 0.00428667 Jy
! Component: 1100  -  total flux cleaned = 0.00440599 Jy
! Component: 1150  -  total flux cleaned = 0.0044997 Jy
! Component: 1200  -  total flux cleaned = 0.00447682 Jy
! Component: 1250  -  total flux cleaned = 0.00449992 Jy
! Component: 1300  -  total flux cleaned = 0.00450011 Jy
! Component: 1350  -  total flux cleaned = 0.00452211 Jy
! Component: 1400  -  total flux cleaned = 0.00463171 Jy
! Component: 1450  -  total flux cleaned = 0.00460958 Jy
! Component: 1500  -  total flux cleaned = 0.00467371 Jy
! Component: 1550  -  total flux cleaned = 0.00471564 Jy
! Component: 1600  -  total flux cleaned = 0.00467355 Jy
! Component: 1650  -  total flux cleaned = 0.00467397 Jy
! Component: 1700  -  total flux cleaned = 0.00471486 Jy
! Component: 1750  -  total flux cleaned = 0.00475489 Jy
! Component: 1800  -  total flux cleaned = 0.00475456 Jy
! Component: 1850  -  total flux cleaned = 0.00477459 Jy
! Component: 1900  -  total flux cleaned = 0.00489204 Jy
! Component: 1950  -  total flux cleaned = 0.00491138 Jy
! Component: 2000  -  total flux cleaned = 0.00496892 Jy
! Component: 2050  -  total flux cleaned = 0.00500678 Jy
! Component: 2100  -  total flux cleaned = 0.0051193 Jy
! Component: 2150  -  total flux cleaned = 0.0051007 Jy
! Component: 2200  -  total flux cleaned = 0.00513749 Jy
! Component: 2250  -  total flux cleaned = 0.00513764 Jy
! Component: 2300  -  total flux cleaned = 0.00515583 Jy
! Component: 2350  -  total flux cleaned = 0.00520942 Jy
! Component: 2400  -  total flux cleaned = 0.00522731 Jy
! Component: 2450  -  total flux cleaned = 0.0051573 Jy
! Component: 2500  -  total flux cleaned = 0.00522704 Jy
! Component: 2550  -  total flux cleaned = 0.00529589 Jy
! Component: 2600  -  total flux cleaned = 0.00527868 Jy
! Component: 2650  -  total flux cleaned = 0.0052958 Jy
! Component: 2700  -  total flux cleaned = 0.00529585 Jy
! Component: 2750  -  total flux cleaned = 0.0052792 Jy
! Component: 2800  -  total flux cleaned = 0.00534498 Jy
! Component: 2850  -  total flux cleaned = 0.00531238 Jy
! Component: 2900  -  total flux cleaned = 0.00534468 Jy
! Component: 2950  -  total flux cleaned = 0.00531241 Jy
! Component: 3000  -  total flux cleaned = 0.00534441 Jy
! Component: 3050  -  total flux cleaned = 0.00539172 Jy
! Component: 3100  -  total flux cleaned = 0.00539167 Jy
! Component: 3150  -  total flux cleaned = 0.00534517 Jy
! Component: 3200  -  total flux cleaned = 0.00536068 Jy
! Component: 3250  -  total flux cleaned = 0.00536074 Jy
! Component: 3300  -  total flux cleaned = 0.00531521 Jy
! Component: 3350  -  total flux cleaned = 0.00527009 Jy
! Component: 3400  -  total flux cleaned = 0.00522527 Jy
! Component: 3450  -  total flux cleaned = 0.00519567 Jy
! Component: 3500  -  total flux cleaned = 0.00516621 Jy
! Component: 3550  -  total flux cleaned = 0.0051075 Jy
! Component: 3600  -  total flux cleaned = 0.00504944 Jy
! Component: 3650  -  total flux cleaned = 0.0050062 Jy
! Component: 3700  -  total flux cleaned = 0.00494876 Jy
! Component: 3750  -  total flux cleaned = 0.00493476 Jy
! Component: 3800  -  total flux cleaned = 0.00492055 Jy
! Component: 3850  -  total flux cleaned = 0.0049064 Jy
! Component: 3900  -  total flux cleaned = 0.00482275 Jy
! Component: 3950  -  total flux cleaned = 0.00480897 Jy
! Component: 4000  -  total flux cleaned = 0.00480898 Jy
! Component: 4050  -  total flux cleaned = 0.00478153 Jy
! Total flux subtracted in 4096 components = 0.00471384 Jy
! Clean residual min=-0.000816 max=0.000823 Jy/beam
! Clean residual mean=-0.000002 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.490792 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 399 components and 0.490792 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J2300+1655_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9749 x 1.898 at -7.08 degrees (North through East)
! Clean map  min=-0.0020092  max=0.35535 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2300+1655_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.355352 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000225455 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.190337 0.190337 0.380674 0.761349 1.5227 3.04539 6.09079 12.1816 24.3632 48.7263 97.4526
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.355 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1576.15 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J2300+1655_X_uvs.log closed on Thu Apr  7 02:07:19 2016