! Started logfile: /scr/pima/bg219b_uvs/J2300+0337_X_dfm.log on Thu May 19 20:39:20 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J2300+0337_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J2300+0337_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.834921 visibilities/baseline/integration-bin.
! Found source: J2300+0337
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18936 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2300+0337_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.043514Jy  sigma=24.088503
! Fit after  self-cal, rms=0.761057Jy  sigma=17.507151
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7088 mas, bmaj=1.686 mas, bpa=-3.15 degrees
! Estimated noise=0.444385 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.172981 Jy
! Component: 100  -  total flux cleaned = 0.240139 Jy
! Total flux subtracted in 100 components = 0.240139 Jy
! Clean residual min=-0.010629 max=0.030689 Jy/beam
! Clean residual mean=0.000003 rms=0.003135 Jy/beam
! Combined flux in latest and established models = 0.240139 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.240139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.097868Jy  sigma=2.192121
! Fit after  self-cal, rms=0.097564Jy  sigma=2.185034
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357326 Jy
! Component: 100  -  total flux cleaned = 0.0561124 Jy
! Total flux subtracted in 100 components = 0.0561124 Jy
! Clean residual min=-0.005939 max=0.019657 Jy/beam
! Clean residual mean=0.000002 rms=0.001824 Jy/beam
! Combined flux in latest and established models = 0.296251 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.296251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076246Jy  sigma=1.668692
! Fit after  self-cal, rms=0.076159Jy  sigma=1.665974
! Inverting map 
! Added new window around map position (-1.4, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.018283 Jy
! Component: 100  -  total flux cleaned = 0.0292959 Jy
! Total flux subtracted in 100 components = 0.0292959 Jy
! Clean residual min=-0.005010 max=0.006610 Jy/beam
! Clean residual mean=0.000001 rms=0.001281 Jy/beam
! Combined flux in latest and established models = 0.325547 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 27 components and 0.325547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069097Jy  sigma=1.497906
! Fit after  self-cal, rms=0.068786Jy  sigma=1.490804
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00930735 Jy
! Component: 100  -  total flux cleaned = 0.015909 Jy
! Total flux subtracted in 100 components = 0.015909 Jy
! Clean residual min=-0.004002 max=0.004641 Jy/beam
! Clean residual mean=0.000001 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.341456 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 50 components and 0.341456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066551Jy  sigma=1.437744
! Fit after  self-cal, rms=0.066473Jy  sigma=1.435988
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8673 mas, bmaj=1.905 mas, bpa=-3.061 degrees
! Estimated noise=0.235284 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.009032 Jy
! Component: 100  -  total flux cleaned = 0.0148176 Jy
! Component: 150  -  total flux cleaned = 0.0190644 Jy
! Component: 200  -  total flux cleaned = 0.0222527 Jy
! Total flux subtracted in 200 components = 0.0222527 Jy
! Clean residual min=-0.003483 max=0.004043 Jy/beam
! Clean residual mean=0.000001 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.363709 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 80 components and 0.363709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064949Jy  sigma=1.401528
! Fit after  self-cal, rms=0.064863Jy  sigma=1.399372
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8673 x 1.905 at -3.061 degrees (North through East)
! Clean map  min=-0.0031744  max=0.23684 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.04     KP        0.97     
!   LA        0.99     MK        1.01     NL        1.03     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.05     KP        1.00     
!   LA        1.01     MK        1.03     NL        1.05     OV        1.02     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.05     KP        1.01     
!   LA        1.02     MK        1.02     NL        1.07     OV        1.01     
!   PT        1.00     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        0.98     
!   LA        0.99     MK        1.02     NL        1.03     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.04     KP        0.98     
!   LA        0.98     MK        1.01     NL        1.02     OV        0.98     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.05     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.04     KP        1.03     
!   LA        1.04     MK        1.07     NL        1.03     OV        1.03     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.03     OV        0.98     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.97     MK        1.03     NL        1.05     OV        1.00     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.99     KP        0.97     
!   LA        0.96     MK        0.97     NL        1.00     OV        0.96     
!   PT        0.93     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.01     KP        0.95     
!   LA        0.95     MK        1.00     NL        1.01     OV        0.98     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        0.97     KP        0.95     
!   LA        0.95     MK        0.98     NL        0.98     OV        0.92     
!   PT        0.90     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.064863Jy  sigma=1.399372
! Fit after  self-cal, rms=0.062984Jy  sigma=1.360756
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.873 mas, bmaj=1.914 mas, bpa=-2.958 degrees
! Estimated noise=0.235253 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.4, -6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204254 Jy
! Component: 100  -  total flux cleaned = 0.0027713 Jy
! Component: 150  -  total flux cleaned = 0.00323551 Jy
! Component: 200  -  total flux cleaned = 0.00346758 Jy
! Total flux subtracted in 200 components = 0.00346758 Jy
! Clean residual min=-0.002057 max=0.001997 Jy/beam
! Clean residual mean=-0.000001 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.367177 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 99 components and 0.367177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062861Jy  sigma=1.357992
! Fit after  self-cal, rms=0.062854Jy  sigma=1.357719
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062854Jy  sigma=1.357719
! Fit after  self-cal, rms=0.062753Jy  sigma=1.354220
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8713 mas, bmaj=1.912 mas, bpa=-3.043 degrees
! Estimated noise=0.234924 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000650254 Jy
! Component: 100  -  total flux cleaned = 0.00119299 Jy
! Component: 150  -  total flux cleaned = 0.00136846 Jy
! Component: 200  -  total flux cleaned = 0.00139348 Jy
! Total flux subtracted in 200 components = 0.00139348 Jy
! Clean residual min=-0.001732 max=0.001809 Jy/beam
! Clean residual mean=-0.000000 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.36857 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 116 components and 0.36857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062713Jy  sigma=1.353351
! Fit after  self-cal, rms=0.062707Jy  sigma=1.353212
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (21, -9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115574 Jy
! Component: 100  -  total flux cleaned = 0.00139733 Jy
! Component: 150  -  total flux cleaned = 0.00160078 Jy
! Component: 200  -  total flux cleaned = 0.00170721 Jy
! Total flux subtracted in 200 components = 0.00170721 Jy
! Clean residual min=-0.001705 max=0.001645 Jy/beam
! Clean residual mean=-0.000000 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.370277 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 129 components and 0.370277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062656Jy  sigma=1.352158
! Fit after  self-cal, rms=0.062650Jy  sigma=1.352033
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062650Jy  sigma=1.352033
! Fit after  self-cal, rms=0.062697Jy  sigma=1.351941
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8721 mas, bmaj=1.912 mas, bpa=-3.005 degrees
! Estimated noise=0.235151 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000502047 Jy
! Component: 100  -  total flux cleaned = 0.000780836 Jy
! Component: 150  -  total flux cleaned = 0.000976277 Jy
! Component: 200  -  total flux cleaned = 0.00104402 Jy
! Total flux subtracted in 200 components = 0.00104402 Jy
! Clean residual min=-0.001609 max=0.001634 Jy/beam
! Clean residual mean=0.000000 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.371321 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 140 components and 0.371321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062674Jy  sigma=1.351441
! Fit after  self-cal, rms=0.062670Jy  sigma=1.351380
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (28.2, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014014 Jy
! Component: 100  -  total flux cleaned = 0.00161913 Jy
! Component: 150  -  total flux cleaned = 0.00158892 Jy
! Component: 200  -  total flux cleaned = 0.00158864 Jy
! Total flux subtracted in 200 components = 0.00158864 Jy
! Clean residual min=-0.001453 max=0.001354 Jy/beam
! Clean residual mean=0.000000 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.37291 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 151 components and 0.37291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062622Jy  sigma=1.350334
! Fit after  self-cal, rms=0.062619Jy  sigma=1.350290
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062619Jy  sigma=1.350290
! Fit after  self-cal, rms=0.062613Jy  sigma=1.350245
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.997 mas, bmaj=2.963 mas, bpa=-3.062 degrees
! Estimated noise=0.30404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000461605 Jy
! Component: 100  -  total flux cleaned = 0.000556073 Jy
! Component: 150  -  total flux cleaned = 0.000608383 Jy
! Component: 200  -  total flux cleaned = 0.000679726 Jy
! Total flux subtracted in 200 components = 0.000679726 Jy
! Clean residual min=-0.001376 max=0.001622 Jy/beam
! Clean residual mean=0.000000 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.373589 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 164 components and 0.373589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062601Jy  sigma=1.350025
! Fit after  self-cal, rms=0.062600Jy  sigma=1.349993
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105885 Jy
! Component: 100  -  total flux cleaned = 0.000172501 Jy
! Component: 150  -  total flux cleaned = 0.000211955 Jy
! Component: 200  -  total flux cleaned = 0.0002304 Jy
! Total flux subtracted in 200 components = 0.0002304 Jy
! Clean residual min=-0.001308 max=0.001540 Jy/beam
! Clean residual mean=0.000000 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.37382 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 173 components and 0.37382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062595Jy  sigma=1.349905
! Fit after  self-cal, rms=0.062593Jy  sigma=1.349887
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8726 mas, bmaj=1.913 mas, bpa=-2.995 degrees
! Estimated noise=0.235194 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8726 x 1.913 at -2.995 degrees (North through East)
! Clean map  min=-0.0013128  max=0.23605 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7122 mas, bmaj=1.69 mas, bpa=-2.937 degrees
! Estimated noise=0.443772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.172791 Jy
! Component: 100  -  total flux cleaned = 0.239928 Jy
! Component: 150  -  total flux cleaned = 0.27549 Jy
! Component: 200  -  total flux cleaned = 0.298939 Jy
! Total flux subtracted in 200 components = 0.298939 Jy
! Clean residual min=-0.004637 max=0.012742 Jy/beam
! Clean residual mean=0.000001 rms=0.001549 Jy/beam
! Combined flux in latest and established models = 0.298939 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.298939 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8726 mas, bmaj=1.913 mas, bpa=-2.995 degrees
! Estimated noise=0.235194 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0241986 Jy
! Component: 100  -  total flux cleaned = 0.0372156 Jy
! Component: 150  -  total flux cleaned = 0.0449348 Jy
! Component: 200  -  total flux cleaned = 0.0502299 Jy
! Total flux subtracted in 200 components = 0.0502299 Jy
! Clean residual min=-0.002308 max=0.003223 Jy/beam
! Clean residual mean=0.000001 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.349169 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 60 components and 0.349169 Jy
! Inverting map 
! Added new window around map position (-2.2, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00409561 Jy
! Component: 100  -  total flux cleaned = 0.00740523 Jy
! Component: 150  -  total flux cleaned = 0.0101416 Jy
! Component: 200  -  total flux cleaned = 0.0124389 Jy
! Total flux subtracted in 200 components = 0.0124389 Jy
! Clean residual min=-0.001765 max=0.001677 Jy/beam
! Clean residual mean=0.000001 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.361608 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 91 components and 0.361608 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.997 mas, bmaj=2.963 mas, bpa=-3.062 degrees
! Estimated noise=0.30404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00327898 Jy
! Component: 100  -  total flux cleaned = 0.00542045 Jy
! Component: 150  -  total flux cleaned = 0.0070764 Jy
! Component: 200  -  total flux cleaned = 0.00827698 Jy
! Total flux subtracted in 200 components = 0.00827698 Jy
! Clean residual min=-0.001759 max=0.001609 Jy/beam
! Clean residual mean=0.000000 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.369885 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000879522 Jy
! Component: 100  -  total flux cleaned = 0.00151897 Jy
! Component: 150  -  total flux cleaned = 0.00204415 Jy
! Component: 200  -  total flux cleaned = 0.0025062 Jy
! Total flux subtracted in 200 components = 0.0025062 Jy
! Clean residual min=-0.001421 max=0.001457 Jy/beam
! Clean residual mean=0.000000 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.372391 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 155 components and 0.372391 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8726 mas, bmaj=1.913 mas, bpa=-2.995 degrees
! Estimated noise=0.235194 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000724801 Jy
! Component: 100  -  total flux cleaned = 0.000605887 Jy
! Component: 150  -  total flux cleaned = 0.000569611 Jy
! Component: 200  -  total flux cleaned = 0.000601807 Jy
! Total flux subtracted in 200 components = 0.000601807 Jy
! Clean residual min=-0.001447 max=0.001373 Jy/beam
! Clean residual mean=0.000000 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.372993 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 181 components and 0.372993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062588Jy  sigma=1.349736
! Fit after  self-cal, rms=0.062566Jy  sigma=1.349268
wmodel /J2300+0337_X_map.mod
! wmodel: Unable to open new model file: /J2300+0337_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J2300+0337_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8726 x 1.913 at -2.995 degrees (North through East)
! Clean map  min=-0.0012055  max=0.2363 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2300+0337_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.236299 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000315968 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.401146 0.401146 0.802292 1.60458 3.20917 6.41834 12.8367 25.6733 51.3467
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.236 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  747.857 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J2300+0337_X_dfm.log closed on Thu May 19 20:39:23 2016