! Started logfile: /scr/pima/bg219b_uvs/J2258-2758_X_dfm.log on Thu May 19 20:39:12 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J2258-2758_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J2258-2758_X_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.910526 visibilities/baseline/integration-bin.
! Found source: J2258-2758
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18684 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2258-2758_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.250720Jy  sigma=27.747024
! Fit after  self-cal, rms=1.073492Jy  sigma=13.102258
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5973 mas, bmaj=1.562 mas, bpa=-3.844 degrees
! Estimated noise=0.940005 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.39635 Jy
! Component: 100  -  total flux cleaned = 1.72207 Jy
! Total flux subtracted in 100 components = 1.72207 Jy
! Clean residual min=-0.084372 max=0.134916 Jy/beam
! Clean residual mean=-0.000118 rms=0.018897 Jy/beam
! Combined flux in latest and established models = 1.72207 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 1.72207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.483800Jy  sigma=5.715737
! Fit after  self-cal, rms=0.483782Jy  sigma=5.715565
! Inverting map 
! Added new window around map position (0.8, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.148968 Jy
! Component: 100  -  total flux cleaned = 0.246564 Jy
! Total flux subtracted in 100 components = 0.246564 Jy
! Clean residual min=-0.068210 max=0.122546 Jy/beam
! Clean residual mean=-0.000082 rms=0.015809 Jy/beam
! Combined flux in latest and established models = 1.96864 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 13 components and 1.96864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.373501Jy  sigma=4.285717
! Fit after  self-cal, rms=0.368862Jy  sigma=4.227660
! Inverting map 
! Added new window around map position (-1.6, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106985 Jy
! Component: 100  -  total flux cleaned = 0.175377 Jy
! Total flux subtracted in 100 components = 0.175377 Jy
! Clean residual min=-0.066017 max=0.093141 Jy/beam
! Clean residual mean=-0.000056 rms=0.013998 Jy/beam
! Combined flux in latest and established models = 2.14401 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 23 components and 2.14401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.317884Jy  sigma=3.623954
! Fit after  self-cal, rms=0.314943Jy  sigma=3.584851
! Inverting map 
! Added new window around map position (-2.2, -3.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0809842 Jy
! Component: 100  -  total flux cleaned = 0.133726 Jy
! Total flux subtracted in 100 components = 0.133726 Jy
! Clean residual min=-0.064128 max=0.071098 Jy/beam
! Clean residual mean=-0.000041 rms=0.012877 Jy/beam
! Combined flux in latest and established models = 2.27774 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 35 components and 2.27774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.287268Jy  sigma=3.249963
! Fit after  self-cal, rms=0.284939Jy  sigma=3.219203
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7674 mas, bmaj=2.017 mas, bpa=-8.221 degrees
! Estimated noise=0.469779 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0992812 Jy
! Component: 100  -  total flux cleaned = 0.148361 Jy
! Component: 150  -  total flux cleaned = 0.180213 Jy
! Component: 200  -  total flux cleaned = 0.201501 Jy
! Total flux subtracted in 200 components = 0.201501 Jy
! Clean residual min=-0.045807 max=0.039982 Jy/beam
! Clean residual mean=-0.000032 rms=0.008941 Jy/beam
! Combined flux in latest and established models = 2.47924 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 59 components and 2.47924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.249606Jy  sigma=2.701168
! Fit after  self-cal, rms=0.249275Jy  sigma=2.698245
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7674 x 2.017 at -8.221 degrees (North through East)
! Clean map  min=-0.043876  max=1.8542 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.09     KP        0.97     
!   LA        0.99     MK        0.98     NL        1.01     OV        0.97     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.11     KP        1.00     
!   LA        1.00     MK        1.03     NL        1.03     OV        1.02     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.12     KP        1.04     
!   LA        1.01     MK        1.03     NL        1.04     OV        1.02     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.08     KP        1.01     
!   LA        0.99     MK        1.00     NL        0.99     OV        0.97     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.08     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.98     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.08     KP        1.01     
!   LA        1.02     MK        1.03     NL        1.03     OV        1.00     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.10     KP        1.05     
!   LA        1.05     MK        1.06     NL        1.02     OV        1.02     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        1.09     KP        1.03     
!   LA        1.00     MK        1.03     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.11     KP        1.00     
!   LA        0.98     MK        1.04     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     HN        1.07     KP        0.99     
!   LA        0.96     MK        1.01     NL        0.96     OV        0.97     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        1.07     KP        0.98     
!   LA        0.96     MK        1.03     NL        0.97     OV        0.95     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.94     HN        1.00     KP        0.97     
!   LA        0.97     MK        0.97     NL        0.94     OV        0.95     
!   PT        0.93     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.249275Jy  sigma=2.698245
! Fit after  self-cal, rms=0.229619Jy  sigma=2.300857
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7738 mas, bmaj=2.017 mas, bpa=-7.969 degrees
! Estimated noise=0.470583 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0186293 Jy
! Component: 100  -  total flux cleaned = -0.0225637 Jy
! Component: 150  -  total flux cleaned = -0.0241092 Jy
! Component: 200  -  total flux cleaned = -0.0263572 Jy
! Total flux subtracted in 200 components = -0.0263572 Jy
! Clean residual min=-0.043106 max=0.033340 Jy/beam
! Clean residual mean=-0.000025 rms=0.007648 Jy/beam
! Combined flux in latest and established models = 2.45288 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 79 components and 2.45288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.226110Jy  sigma=2.254871
! Fit after  self-cal, rms=0.225923Jy  sigma=2.253533
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.225923Jy  sigma=2.253533
! Fit after  self-cal, rms=0.225799Jy  sigma=2.356985
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7736 mas, bmaj=2.02 mas, bpa=-7.893 degrees
! Estimated noise=0.461459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0311626 Jy
! Component: 100  -  total flux cleaned = -0.0362208 Jy
! Component: 150  -  total flux cleaned = -0.0366605 Jy
! Component: 200  -  total flux cleaned = -0.036309 Jy
! Total flux subtracted in 200 components = -0.036309 Jy
! Clean residual min=-0.039561 max=0.031623 Jy/beam
! Clean residual mean=-0.000028 rms=0.007494 Jy/beam
! Combined flux in latest and established models = 2.41657 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 86 components and 2.41657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.220850Jy  sigma=2.310196
! Fit after  self-cal, rms=0.220727Jy  sigma=2.308727
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00070647 Jy
! Component: 100  -  total flux cleaned = 0.00131748 Jy
! Component: 150  -  total flux cleaned = 0.00216385 Jy
! Component: 200  -  total flux cleaned = 0.0021623 Jy
! Total flux subtracted in 200 components = 0.0021623 Jy
! Clean residual min=-0.039161 max=0.031362 Jy/beam
! Clean residual mean=-0.000027 rms=0.007499 Jy/beam
! Combined flux in latest and established models = 2.41874 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 94 components and 2.41874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.219835Jy  sigma=2.301171
! Fit after  self-cal, rms=0.219775Jy  sigma=2.300630
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.219775Jy  sigma=2.300630
! Fit after  self-cal, rms=0.215993Jy  sigma=2.266545
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7745 mas, bmaj=2.023 mas, bpa=-7.806 degrees
! Estimated noise=0.455584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0241479 Jy
! Component: 100  -  total flux cleaned = -0.031828 Jy
! Component: 150  -  total flux cleaned = -0.0321661 Jy
! Component: 200  -  total flux cleaned = -0.0318822 Jy
! Total flux subtracted in 200 components = -0.0318822 Jy
! Clean residual min=-0.036603 max=0.032138 Jy/beam
! Clean residual mean=-0.000027 rms=0.007113 Jy/beam
! Combined flux in latest and established models = 2.38685 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 100 components and 2.38685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.212721Jy  sigma=2.239589
! Fit after  self-cal, rms=0.212663Jy  sigma=2.239194
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000545336 Jy
! Component: 100  -  total flux cleaned = 0.000541829 Jy
! Component: 150  -  total flux cleaned = 0.000784687 Jy
! Component: 200  -  total flux cleaned = 0.000788402 Jy
! Total flux subtracted in 200 components = 0.000788402 Jy
! Clean residual min=-0.036372 max=0.031856 Jy/beam
! Clean residual mean=-0.000026 rms=0.007111 Jy/beam
! Combined flux in latest and established models = 2.38764 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 103 components and 2.38764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.211973Jy  sigma=2.234027
! Fit after  self-cal, rms=0.211949Jy  sigma=2.233748
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.211949Jy  sigma=2.233748
! Fit after  self-cal, rms=0.209362Jy  sigma=2.211126
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.102 mas, bmaj=5.076 mas, bpa=-0.6012 degrees
! Estimated noise=0.629964 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.017289 Jy
! Component: 100  -  total flux cleaned = -0.0186117 Jy
! Component: 150  -  total flux cleaned = -0.0196594 Jy
! Component: 200  -  total flux cleaned = -0.0200926 Jy
! Total flux subtracted in 200 components = -0.0200926 Jy
! Clean residual min=-0.041147 max=0.031302 Jy/beam
! Clean residual mean=-0.000059 rms=0.009338 Jy/beam
! Combined flux in latest and established models = 2.36755 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 106 components and 2.36755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.209253Jy  sigma=2.215157
! Fit after  self-cal, rms=0.208611Jy  sigma=2.203170
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00283746 Jy
! Component: 100  -  total flux cleaned = -0.0019709 Jy
! Component: 150  -  total flux cleaned = -0.0023282 Jy
! Component: 200  -  total flux cleaned = -0.00297706 Jy
! Total flux subtracted in 200 components = -0.00297706 Jy
! Clean residual min=-0.040189 max=0.029306 Jy/beam
! Clean residual mean=-0.000071 rms=0.009263 Jy/beam
! Combined flux in latest and established models = 2.36457 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 109 components and 2.36457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.209978Jy  sigma=2.225502
! Fit after  self-cal, rms=0.209787Jy  sigma=2.222103
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7751 mas, bmaj=2.025 mas, bpa=-7.739 degrees
! Estimated noise=0.450841 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7751 x 2.025 at -7.739 degrees (North through East)
! Clean map  min=-0.03398  max=1.7954 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.209787Jy  sigma=2.222103
! Fit after  self-cal, rms=0.206003Jy  sigma=2.161291
! Inverting map and beam 
! Estimated beam: bmin=0.775 mas, bmaj=2.028 mas, bpa=-7.84 degrees
! Estimated noise=0.446405 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0163733 Jy
! Component: 100  -  total flux cleaned = -0.0187754 Jy
! Component: 150  -  total flux cleaned = -0.0205867 Jy
! Component: 200  -  total flux cleaned = -0.0216243 Jy
! Total flux subtracted in 200 components = -0.0216243 Jy
! Clean residual min=-0.032403 max=0.031248 Jy/beam
! Clean residual mean=-0.000028 rms=0.006538 Jy/beam
! Combined flux in latest and established models = 2.34295 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 121 components and 2.34295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.201971Jy  sigma=2.128402
! Fit after  self-cal, rms=0.201918Jy  sigma=2.127240
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.42829e-05 Jy
! Component: 100  -  total flux cleaned = -0.000254861 Jy
! Component: 150  -  total flux cleaned = -0.000251958 Jy
! Component: 200  -  total flux cleaned = 2.8123e-07 Jy
! Total flux subtracted in 200 components = 2.8123e-07 Jy
! Clean residual min=-0.032340 max=0.030907 Jy/beam
! Clean residual mean=-0.000027 rms=0.006530 Jy/beam
! Combined flux in latest and established models = 2.34295 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 126 components and 2.34295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.201103Jy  sigma=2.120156
! Fit after  self-cal, rms=0.201061Jy  sigma=2.119841
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.201061Jy  sigma=2.119841
! Fit after  self-cal, rms=0.199157Jy  sigma=2.099726
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.601 mas, bmaj=1.566 mas, bpa=-3.544 degrees
! Estimated noise=0.899949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.33564 Jy
! Component: 100  -  total flux cleaned = 1.64682 Jy
! Component: 150  -  total flux cleaned = 1.80336 Jy
! Component: 200  -  total flux cleaned = 1.917 Jy
! Total flux subtracted in 200 components = 1.917 Jy
! Clean residual min=-0.055299 max=0.081825 Jy/beam
! Clean residual mean=-0.000078 rms=0.012816 Jy/beam
! Combined flux in latest and established models = 1.917 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 1.917 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7751 mas, bmaj=2.028 mas, bpa=-7.766 degrees
! Estimated noise=0.442325 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.156644 Jy
! Component: 100  -  total flux cleaned = 0.235652 Jy
! Component: 150  -  total flux cleaned = 0.288178 Jy
! Component: 200  -  total flux cleaned = 0.325504 Jy
! Total flux subtracted in 200 components = 0.325504 Jy
! Clean residual min=-0.034726 max=0.042790 Jy/beam
! Clean residual mean=-0.000059 rms=0.007432 Jy/beam
! Combined flux in latest and established models = 2.2425 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 40 components and 2.2425 Jy
! Inverting map 
! Added new window around map position (1.6, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0373894 Jy
! Component: 100  -  total flux cleaned = 0.0536203 Jy
! Component: 150  -  total flux cleaned = 0.0621716 Jy
! Component: 200  -  total flux cleaned = 0.0687938 Jy
! Total flux subtracted in 200 components = 0.0687938 Jy
! Clean residual min=-0.033208 max=0.031319 Jy/beam
! Clean residual mean=-0.000027 rms=0.006502 Jy/beam
! Combined flux in latest and established models = 2.31129 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 59 components and 2.31129 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.097 mas, bmaj=5.07 mas, bpa=-0.657 degrees
! Estimated noise=0.618701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0201747 Jy
! Component: 100  -  total flux cleaned = 0.0202348 Jy
! Component: 150  -  total flux cleaned = 0.0197976 Jy
! Component: 200  -  total flux cleaned = 0.0189205 Jy
! Total flux subtracted in 200 components = 0.0189205 Jy
! Clean residual min=-0.038488 max=0.027474 Jy/beam
! Clean residual mean=-0.000059 rms=0.008810 Jy/beam
! Combined flux in latest and established models = 2.33021 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00075323 Jy
! Component: 100  -  total flux cleaned = -0.00109623 Jy
! Component: 150  -  total flux cleaned = -0.00172669 Jy
! Component: 200  -  total flux cleaned = -0.00200959 Jy
! Total flux subtracted in 200 components = -0.00200959 Jy
! Clean residual min=-0.039023 max=0.026914 Jy/beam
! Clean residual mean=-0.000062 rms=0.008655 Jy/beam
! Combined flux in latest and established models = 2.3282 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 68 components and 2.3282 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7751 mas, bmaj=2.028 mas, bpa=-7.766 degrees
! Estimated noise=0.442325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0022692 Jy
! Component: 100  -  total flux cleaned = 0.000155354 Jy
! Component: 150  -  total flux cleaned = 0.00121378 Jy
! Component: 200  -  total flux cleaned = 0.00120148 Jy
! Total flux subtracted in 200 components = 0.00120148 Jy
! Clean residual min=-0.032978 max=0.029639 Jy/beam
! Clean residual mean=-0.000023 rms=0.006246 Jy/beam
! Combined flux in latest and established models = 2.32941 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 78 components and 2.32941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.195561Jy  sigma=2.068186
! Fit after  self-cal, rms=0.194443Jy  sigma=2.055065
wmodel /J2258-2758_X_map.mod
! wmodel: Unable to open new model file: /J2258-2758_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J2258-2758_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7751 x 2.028 at -7.766 degrees (North through East)
! Clean map  min=-0.030145  max=1.7552 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2258-2758_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.75515 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00620355 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.06035 1.06035 2.12069 4.24138 8.48276 16.9655 33.931 67.8621
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0186 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.755 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  282.926 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J2258-2758_X_dfm.log closed on Thu May 19 20:39:15 2016