! Started logfile: /scr/pima/bg219b_uvs/J2258+0203_X_dfm.log on Thu May 19 20:39:02 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J2258+0203_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J2258+0203_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.759829 visibilities/baseline/integration-bin.
! Found source: J2258+0203
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21336 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2258+0203_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008980Jy  sigma=24.187366
! Fit after  self-cal, rms=0.902086Jy  sigma=21.576445
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.716 mas, bmaj=1.651 mas, bpa=-3.685 degrees
! Estimated noise=0.400367 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.070147 Jy
! Component: 100  -  total flux cleaned = 0.0949819 Jy
! Total flux subtracted in 100 components = 0.0949819 Jy
! Clean residual min=-0.008401 max=0.023922 Jy/beam
! Clean residual mean=0.000003 rms=0.002044 Jy/beam
! Combined flux in latest and established models = 0.0949819 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0949819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078441Jy  sigma=1.807523
! Fit after  self-cal, rms=0.077725Jy  sigma=1.792052
! Inverting map 
! Added new window around map position (2.4, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.021686 Jy
! Component: 100  -  total flux cleaned = 0.0343176 Jy
! Total flux subtracted in 100 components = 0.0343176 Jy
! Clean residual min=-0.005432 max=0.008677 Jy/beam
! Clean residual mean=0.000002 rms=0.001369 Jy/beam
! Combined flux in latest and established models = 0.1293 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 22 components and 0.1293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068967Jy  sigma=1.566062
! Fit after  self-cal, rms=0.068439Jy  sigma=1.553635
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108227 Jy
! Component: 100  -  total flux cleaned = 0.0189774 Jy
! Total flux subtracted in 100 components = 0.0189774 Jy
! Clean residual min=-0.004462 max=0.007851 Jy/beam
! Clean residual mean=0.000002 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.148277 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 32 components and 0.148277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065208Jy  sigma=1.468358
! Fit after  self-cal, rms=0.065119Jy  sigma=1.466113
! Inverting map 
! Added new window around map position (1.2, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00804758 Jy
! Component: 100  -  total flux cleaned = 0.0139735 Jy
! Total flux subtracted in 100 components = 0.0139735 Jy
! Clean residual min=-0.003857 max=0.004552 Jy/beam
! Clean residual mean=0.000001 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.16225 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 45 components and 0.16225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063243Jy  sigma=1.416232
! Fit after  self-cal, rms=0.063189Jy  sigma=1.414862
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8867 mas, bmaj=1.955 mas, bpa=-3.708 degrees
! Estimated noise=0.217821 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00917675 Jy
! Component: 100  -  total flux cleaned = 0.015746 Jy
! Component: 150  -  total flux cleaned = 0.0207765 Jy
! Component: 200  -  total flux cleaned = 0.0246824 Jy
! Total flux subtracted in 200 components = 0.0246824 Jy
! Clean residual min=-0.002487 max=0.003886 Jy/beam
! Clean residual mean=0.000000 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.186933 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 82 components and 0.186933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061420Jy  sigma=1.368843
! Fit after  self-cal, rms=0.061364Jy  sigma=1.367409
! Inverting map 
! Added new window around map position (3.8, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00440418 Jy
! Component: 100  -  total flux cleaned = 0.00759601 Jy
! Component: 150  -  total flux cleaned = 0.0102214 Jy
! Component: 200  -  total flux cleaned = 0.0124307 Jy
! Total flux subtracted in 200 components = 0.0124307 Jy
! Clean residual min=-0.002397 max=0.002409 Jy/beam
! Clean residual mean=0.000000 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.199363 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 131 components and 0.199363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060920Jy  sigma=1.355760
! Fit after  self-cal, rms=0.060896Jy  sigma=1.355098
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8867 x 1.955 at -3.708 degrees (North through East)
! Clean map  min=-0.0020528  max=0.096648 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.05     KP        0.96     
!   LA        0.95     MK        1.01     NL        1.01     OV        1.02     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.04     KP        0.98     
!   LA        0.98     MK        1.05     NL        1.03     OV        1.03     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        1.11     KP        1.00     
!   LA        0.95     MK        0.99     NL        1.10     OV        1.05     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        0.96     
!   LA        0.96     MK        1.00     NL        1.02     OV        1.04     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.05     KP        0.97     
!   LA        0.95     MK        0.96     NL        1.01     OV        1.04     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.03     KP        0.98     
!   LA        0.97     MK        1.04     NL        1.03     OV        1.02     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        1.04     
!   LA        1.00     MK        1.05     NL        1.02     OV        1.04     
!   PT        1.01     SC        1.11     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.95     KP        0.99     
!   LA        0.97     MK        1.02     NL        1.01     OV        0.98     
!   PT        0.96     SC        1.06     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        0.97     KP        0.98     
!   LA        0.94     MK        1.03     NL        1.02     OV        1.00     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.95     KP        0.96     
!   LA        0.94     MK        0.98     NL        1.02     OV        0.97     
!   PT        0.92     SC        1.08     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.93     KP        0.94     
!   LA        0.93     MK        1.01     NL        1.05     OV        0.99     
!   PT        0.95     SC        0.89     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.93     HN        1.02     KP        0.94     
!   LA        0.95     MK        0.99     NL        0.97     OV        0.98     
!   PT        0.90     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.060896Jy  sigma=1.355098
! Fit after  self-cal, rms=0.059787Jy  sigma=1.343676
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8915 mas, bmaj=1.968 mas, bpa=-3.66 degrees
! Estimated noise=0.216141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124441 Jy
! Component: 100  -  total flux cleaned = 0.00172466 Jy
! Component: 150  -  total flux cleaned = 0.00215624 Jy
! Component: 200  -  total flux cleaned = 0.00247889 Jy
! Total flux subtracted in 200 components = 0.00247889 Jy
! Clean residual min=-0.001417 max=0.001438 Jy/beam
! Clean residual mean=0.000000 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.201842 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 149 components and 0.201842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059748Jy  sigma=1.342577
! Fit after  self-cal, rms=0.059756Jy  sigma=1.342398
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059756Jy  sigma=1.342398
! Fit after  self-cal, rms=0.059588Jy  sigma=1.340306
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8912 mas, bmaj=1.967 mas, bpa=-3.657 degrees
! Estimated noise=0.215752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000734986 Jy
! Component: 100  -  total flux cleaned = 0.00110893 Jy
! Component: 150  -  total flux cleaned = 0.00123622 Jy
! Component: 200  -  total flux cleaned = 0.00125206 Jy
! Total flux subtracted in 200 components = 0.00125206 Jy
! Clean residual min=-0.001254 max=0.001446 Jy/beam
! Clean residual mean=0.000000 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.203094 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 162 components and 0.203094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059574Jy  sigma=1.339957
! Fit after  self-cal, rms=0.059576Jy  sigma=1.339898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.6, -20).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104043 Jy
! Component: 100  -  total flux cleaned = 0.00114677 Jy
! Component: 150  -  total flux cleaned = 0.00140485 Jy
! Component: 200  -  total flux cleaned = 0.00161217 Jy
! Total flux subtracted in 200 components = 0.00161217 Jy
! Clean residual min=-0.001222 max=0.001305 Jy/beam
! Clean residual mean=0.000000 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.204707 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 185 components and 0.204706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059546Jy  sigma=1.339188
! Fit after  self-cal, rms=0.059547Jy  sigma=1.339141
! Inverting map 
! Added new window around map position (-50, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000679967 Jy
! Component: 100  -  total flux cleaned = 0.000628949 Jy
! Component: 150  -  total flux cleaned = 0.000669128 Jy
! Component: 200  -  total flux cleaned = 0.000746902 Jy
! Total flux subtracted in 200 components = 0.000746902 Jy
! Clean residual min=-0.001139 max=0.001207 Jy/beam
! Clean residual mean=0.000000 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.205453 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 208 components and 0.205453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059516Jy  sigma=1.338507
! Fit after  self-cal, rms=0.059509Jy  sigma=1.338403
! Inverting map 
! Added new window around map position (0, -50.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000623152 Jy
! Component: 100  -  total flux cleaned = 0.000493383 Jy
! Component: 150  -  total flux cleaned = 0.000492607 Jy
! Component: 200  -  total flux cleaned = 0.000511758 Jy
! Total flux subtracted in 200 components = 0.000511758 Jy
! Clean residual min=-0.001040 max=0.001180 Jy/beam
! Clean residual mean=0.000000 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.205965 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 225 components and 0.205965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059483Jy  sigma=1.337791
! Fit after  self-cal, rms=0.059480Jy  sigma=1.337741
! Inverting map 
! Added new window around map position (32.2, -34.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000688356 Jy
! Component: 100  -  total flux cleaned = 0.000793579 Jy
! Component: 150  -  total flux cleaned = 0.000904941 Jy
! Component: 200  -  total flux cleaned = 0.000966179 Jy
! Total flux subtracted in 200 components = 0.000966179 Jy
! Clean residual min=-0.001004 max=0.000940 Jy/beam
! Clean residual mean=0.000001 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.206931 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 240 components and 0.206931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059454Jy  sigma=1.337211
! Fit after  self-cal, rms=0.059452Jy  sigma=1.337172
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059452Jy  sigma=1.337172
! Fit after  self-cal, rms=0.059479Jy  sigma=1.337131
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.892 mas, bmaj=1.969 mas, bpa=-3.64 degrees
! Estimated noise=0.215578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000387221 Jy
! Component: 100  -  total flux cleaned = 0.000491355 Jy
! Component: 150  -  total flux cleaned = 0.000549277 Jy
! Component: 200  -  total flux cleaned = 0.000567463 Jy
! Total flux subtracted in 200 components = 0.000567463 Jy
! Clean residual min=-0.000985 max=0.000941 Jy/beam
! Clean residual mean=0.000000 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.207499 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 244 components and 0.207499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059465Jy  sigma=1.336847
! Fit after  self-cal, rms=0.059466Jy  sigma=1.336835
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.11982e-05 Jy
! Component: 100  -  total flux cleaned = 5.64674e-05 Jy
! Component: 150  -  total flux cleaned = 5.63628e-05 Jy
! Component: 200  -  total flux cleaned = 7.26624e-05 Jy
! Total flux subtracted in 200 components = 7.26624e-05 Jy
! Clean residual min=-0.000981 max=0.000936 Jy/beam
! Clean residual mean=0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.207571 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 249 components and 0.207571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059456Jy  sigma=1.336648
! Fit after  self-cal, rms=0.059455Jy  sigma=1.336640
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059455Jy  sigma=1.336640
! Fit after  self-cal, rms=0.059474Jy  sigma=1.336627
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.032 mas, bmaj=3.267 mas, bpa=-2.695 degrees
! Estimated noise=0.272616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000365655 Jy
! Component: 100  -  total flux cleaned = -0.000257455 Jy
! Component: 150  -  total flux cleaned = -0.000210246 Jy
! Component: 200  -  total flux cleaned = -0.000181383 Jy
! Total flux subtracted in 200 components = -0.000181383 Jy
! Clean residual min=-0.000911 max=0.001090 Jy/beam
! Clean residual mean=0.000001 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.20739 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 262 components and 0.20739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059471Jy  sigma=1.336537
! Fit after  self-cal, rms=0.059471Jy  sigma=1.336519
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.54855e-05 Jy
! Component: 100  -  total flux cleaned = 9.81255e-06 Jy
! Component: 150  -  total flux cleaned = 7.84105e-05 Jy
! Component: 200  -  total flux cleaned = 0.000131378 Jy
! Total flux subtracted in 200 components = 0.000131378 Jy
! Clean residual min=-0.000905 max=0.001044 Jy/beam
! Clean residual mean=0.000001 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.207521 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 274 components and 0.207521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059470Jy  sigma=1.336472
! Fit after  self-cal, rms=0.059470Jy  sigma=1.336469
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8924 mas, bmaj=1.969 mas, bpa=-3.618 degrees
! Estimated noise=0.215573 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8924 x 1.969 at -3.618 degrees (North through East)
! Clean map  min=-0.00086908  max=0.095646 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7189 mas, bmaj=1.655 mas, bpa=-3.426 degrees
! Estimated noise=0.395785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0692421 Jy
! Component: 100  -  total flux cleaned = 0.0992021 Jy
! Component: 150  -  total flux cleaned = 0.117851 Jy
! Component: 200  -  total flux cleaned = 0.13115 Jy
! Total flux subtracted in 200 components = 0.13115 Jy
! Clean residual min=-0.004777 max=0.007773 Jy/beam
! Clean residual mean=0.000001 rms=0.001265 Jy/beam
! Combined flux in latest and established models = 0.13115 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.13115 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8924 mas, bmaj=1.969 mas, bpa=-3.618 degrees
! Estimated noise=0.215573 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177037 Jy
! Component: 100  -  total flux cleaned = 0.0296957 Jy
! Component: 150  -  total flux cleaned = 0.0383037 Jy
! Component: 200  -  total flux cleaned = 0.0447294 Jy
! Total flux subtracted in 200 components = 0.0447294 Jy
! Clean residual min=-0.002705 max=0.003831 Jy/beam
! Clean residual mean=0.000000 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.17588 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 69 components and 0.17588 Jy
! Inverting map 
! Added new window around map position (9.8, -11.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00499543 Jy
! Component: 100  -  total flux cleaned = 0.00895799 Jy
! Component: 150  -  total flux cleaned = 0.0121375 Jy
! Component: 200  -  total flux cleaned = 0.014724 Jy
! Total flux subtracted in 200 components = 0.014724 Jy
! Clean residual min=-0.001750 max=0.002169 Jy/beam
! Clean residual mean=0.000000 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.190604 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 100 components and 0.190604 Jy
! Inverting map 
! Added new window around map position (11.6, -13.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00231103 Jy
! Component: 100  -  total flux cleaned = 0.00421032 Jy
! Component: 150  -  total flux cleaned = 0.00577371 Jy
! Component: 200  -  total flux cleaned = 0.00700846 Jy
! Total flux subtracted in 200 components = 0.00700846 Jy
! Clean residual min=-0.001492 max=0.001629 Jy/beam
! Clean residual mean=0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.197612 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 133 components and 0.197612 Jy
! Inverting map 
! Added new window around map position (-8.6, 13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137681 Jy
! Component: 100  -  total flux cleaned = 0.00226066 Jy
! Component: 150  -  total flux cleaned = 0.00287987 Jy
! Component: 200  -  total flux cleaned = 0.00345099 Jy
! Total flux subtracted in 200 components = 0.00345099 Jy
! Clean residual min=-0.001285 max=0.001242 Jy/beam
! Clean residual mean=0.000000 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.201063 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 160 components and 0.201063 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.032 mas, bmaj=3.267 mas, bpa=-2.695 degrees
! Estimated noise=0.272616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149418 Jy
! Component: 100  -  total flux cleaned = 0.00250348 Jy
! Component: 150  -  total flux cleaned = 0.00310396 Jy
! Component: 200  -  total flux cleaned = 0.00365193 Jy
! Total flux subtracted in 200 components = 0.00365193 Jy
! Clean residual min=-0.001204 max=0.001061 Jy/beam
! Clean residual mean=0.000001 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.204715 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000412595 Jy
! Component: 100  -  total flux cleaned = 0.000829039 Jy
! Component: 150  -  total flux cleaned = 0.00117336 Jy
! Component: 200  -  total flux cleaned = 0.00148681 Jy
! Total flux subtracted in 200 components = 0.00148681 Jy
! Clean residual min=-0.001040 max=0.001026 Jy/beam
! Clean residual mean=0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.206202 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 238 components and 0.206202 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8924 mas, bmaj=1.969 mas, bpa=-3.618 degrees
! Estimated noise=0.215573 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397769 Jy
! Component: 100  -  total flux cleaned = 0.0004299 Jy
! Component: 150  -  total flux cleaned = 0.000429755 Jy
! Component: 200  -  total flux cleaned = 0.000430614 Jy
! Total flux subtracted in 200 components = 0.000430614 Jy
! Clean residual min=-0.000967 max=0.000956 Jy/beam
! Clean residual mean=0.000000 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.206632 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 261 components and 0.206632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059503Jy  sigma=1.337071
! Fit after  self-cal, rms=0.059495Jy  sigma=1.336942
wmodel /J2258+0203_X_map.mod
! wmodel: Unable to open new model file: /J2258+0203_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J2258+0203_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8924 x 1.969 at -3.618 degrees (North through East)
! Clean map  min=-0.00086608  max=0.096205 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2258+0203_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0962052 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000247468 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.771688 0.771688 1.54338 3.08675 6.1735 12.347 24.694 49.388 98.776
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.096 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  388.758 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J2258+0203_X_dfm.log closed on Thu May 19 20:39:06 2016