! Started logfile: /scr/pima/bg219b_uvs/J2254+1341_X_dfm.log on Thu May 19 20:38:46 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J2254+1341_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J2254+1341_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.903704 visibilities/baseline/integration-bin.
! Found source: J2254+1341
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17568 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2254+1341_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.100400Jy  sigma=24.120362
! Fit after  self-cal, rms=0.573810Jy  sigma=12.621123
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7775 mas, bmaj=1.551 mas, bpa=-2.793 degrees
! Estimated noise=0.480779 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.323918 Jy
! Component: 100  -  total flux cleaned = 0.395729 Jy
! Total flux subtracted in 100 components = 0.395729 Jy
! Clean residual min=-0.009867 max=0.024862 Jy/beam
! Clean residual mean=-0.000025 rms=0.002709 Jy/beam
! Combined flux in latest and established models = 0.395729 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.395729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092291Jy  sigma=1.954577
! Fit after  self-cal, rms=0.092274Jy  sigma=1.954475
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0285487 Jy
! Component: 100  -  total flux cleaned = 0.0456133 Jy
! Total flux subtracted in 100 components = 0.0456133 Jy
! Clean residual min=-0.006875 max=0.019034 Jy/beam
! Clean residual mean=-0.000017 rms=0.001878 Jy/beam
! Combined flux in latest and established models = 0.441342 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 20 components and 0.441342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077975Jy  sigma=1.631528
! Fit after  self-cal, rms=0.077986Jy  sigma=1.631226
! Inverting map 
! Added new window around map position (-0.2, -2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164858 Jy
! Component: 100  -  total flux cleaned = 0.0264959 Jy
! Total flux subtracted in 100 components = 0.0264959 Jy
! Clean residual min=-0.005474 max=0.008065 Jy/beam
! Clean residual mean=-0.000013 rms=0.001493 Jy/beam
! Combined flux in latest and established models = 0.467838 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 38 components and 0.467838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072451Jy  sigma=1.505858
! Fit after  self-cal, rms=0.072258Jy  sigma=1.502387
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9717 mas, bmaj=1.871 mas, bpa=-0.4149 degrees
! Estimated noise=0.263837 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132837 Jy
! Component: 100  -  total flux cleaned = 0.0219034 Jy
! Component: 150  -  total flux cleaned = 0.0280622 Jy
! Component: 200  -  total flux cleaned = 0.0325688 Jy
! Total flux subtracted in 200 components = 0.0325688 Jy
! Clean residual min=-0.004670 max=0.008064 Jy/beam
! Clean residual mean=-0.000009 rms=0.001305 Jy/beam
! Combined flux in latest and established models = 0.500407 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 68 components and 0.500407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069247Jy  sigma=1.435903
! Fit after  self-cal, rms=0.069133Jy  sigma=1.433523
! Inverting map 
! Added new window around map position (-0.2, -5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00716962 Jy
! Component: 100  -  total flux cleaned = 0.0109989 Jy
! Component: 150  -  total flux cleaned = 0.0138238 Jy
! Component: 200  -  total flux cleaned = 0.0154905 Jy
! Total flux subtracted in 200 components = 0.0154905 Jy
! Clean residual min=-0.004374 max=0.005297 Jy/beam
! Clean residual mean=-0.000004 rms=0.001103 Jy/beam
! Combined flux in latest and established models = 0.515898 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 106 components and 0.515898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068272Jy  sigma=1.414938
! Fit after  self-cal, rms=0.068187Jy  sigma=1.413247
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9717 x 1.871 at -0.4149 degrees (North through East)
! Clean map  min=-0.0040329  max=0.4271 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        0.99     
!   LA        1.00     MK        0.99     NL        1.03     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.04     KP        1.01     
!   LA        1.02     MK        1.03     NL        1.04     OV        1.01     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        1.03     KP        1.04     
!   LA        1.04     MK        1.03     NL        1.07     OV        1.01     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.02     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.99     MK        0.98     NL        1.01     OV        0.98     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        1.00     
!   LA        1.00     MK        1.03     NL        1.05     OV        1.00     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.02     KP        1.02     
!   LA        1.03     MK        1.05     NL        1.06     OV        1.02     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        1.01     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.98     KP        0.99     
!   LA        0.98     MK        1.03     NL        1.05     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.95     KP        0.98     
!   LA        0.95     MK        1.00     NL        1.01     OV        0.96     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.99     KP        0.95     
!   LA        0.95     MK        1.01     NL        1.00     OV        0.96     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.94     HN        0.92     KP        0.95     
!   LA        0.96     MK        0.98     NL        0.97     OV        0.92     
!   PT        0.93     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.068187Jy  sigma=1.413247
! Fit after  self-cal, rms=0.062669Jy  sigma=1.310734
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9763 mas, bmaj=1.879 mas, bpa=-0.3532 degrees
! Estimated noise=0.263569 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194137 Jy
! Component: 100  -  total flux cleaned = 0.00200099 Jy
! Component: 150  -  total flux cleaned = 0.0020553 Jy
! Component: 200  -  total flux cleaned = 0.00219445 Jy
! Total flux subtracted in 200 components = 0.00219445 Jy
! Clean residual min=-0.002881 max=0.003005 Jy/beam
! Clean residual mean=-0.000004 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.518092 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 124 components and 0.518092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062543Jy  sigma=1.307740
! Fit after  self-cal, rms=0.062534Jy  sigma=1.307499
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062534Jy  sigma=1.307499
! Fit after  self-cal, rms=0.061965Jy  sigma=1.292677
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9761 mas, bmaj=1.876 mas, bpa=-0.3922 degrees
! Estimated noise=0.263418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000347195 Jy
! Component: 100  -  total flux cleaned = -0.000392989 Jy
! Component: 150  -  total flux cleaned = -0.000498939 Jy
! Component: 200  -  total flux cleaned = -0.000499348 Jy
! Total flux subtracted in 200 components = -0.000499348 Jy
! Clean residual min=-0.001925 max=0.001968 Jy/beam
! Clean residual mean=-0.000003 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.517593 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 135 components and 0.517593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061912Jy  sigma=1.291456
! Fit after  self-cal, rms=0.061909Jy  sigma=1.291394
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-15.4, -30.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183427 Jy
! Component: 100  -  total flux cleaned = 0.00237196 Jy
! Component: 150  -  total flux cleaned = 0.00244419 Jy
! Component: 200  -  total flux cleaned = 0.00244462 Jy
! Total flux subtracted in 200 components = 0.00244462 Jy
! Clean residual min=-0.001739 max=0.001784 Jy/beam
! Clean residual mean=-0.000002 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.520038 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 157 components and 0.520038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061841Jy  sigma=1.289919
! Fit after  self-cal, rms=0.061837Jy  sigma=1.289856
! Inverting map 
! Added new window around map position (12.8, -31.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131295 Jy
! Component: 100  -  total flux cleaned = 0.0016652 Jy
! Component: 150  -  total flux cleaned = 0.00173462 Jy
! Component: 200  -  total flux cleaned = 0.00173344 Jy
! Total flux subtracted in 200 components = 0.00173344 Jy
! Clean residual min=-0.001741 max=0.001701 Jy/beam
! Clean residual mean=-0.000002 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.521771 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 173 components and 0.521771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061776Jy  sigma=1.288462
! Fit after  self-cal, rms=0.061772Jy  sigma=1.288398
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061772Jy  sigma=1.288398
! Fit after  self-cal, rms=0.061753Jy  sigma=1.288161
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9767 mas, bmaj=1.876 mas, bpa=-0.3839 degrees
! Estimated noise=0.263348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000445615 Jy
! Component: 100  -  total flux cleaned = 0.000508775 Jy
! Component: 150  -  total flux cleaned = 0.000509103 Jy
! Component: 200  -  total flux cleaned = 0.000482585 Jy
! Total flux subtracted in 200 components = 0.000482585 Jy
! Clean residual min=-0.001770 max=0.001648 Jy/beam
! Clean residual mean=-0.000002 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.522254 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 183 components and 0.522254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061726Jy  sigma=1.287542
! Fit after  self-cal, rms=0.061724Jy  sigma=1.287526
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011131 Jy
! Component: 100  -  total flux cleaned = 0.00011111 Jy
! Component: 150  -  total flux cleaned = 8.66288e-05 Jy
! Component: 200  -  total flux cleaned = 6.35223e-05 Jy
! Total flux subtracted in 200 components = 6.35223e-05 Jy
! Clean residual min=-0.001713 max=0.001637 Jy/beam
! Clean residual mean=-0.000002 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.522318 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 188 components and 0.522318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061707Jy  sigma=1.287147
! Fit after  self-cal, rms=0.061706Jy  sigma=1.287141
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061706Jy  sigma=1.287141
! Fit after  self-cal, rms=0.061703Jy  sigma=1.287103
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.11 mas, bmaj=2.899 mas, bpa=-2.614 degrees
! Estimated noise=0.324721 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000532679 Jy
! Component: 100  -  total flux cleaned = -0.000653392 Jy
! Component: 150  -  total flux cleaned = -0.000672762 Jy
! Component: 200  -  total flux cleaned = -0.000707551 Jy
! Total flux subtracted in 200 components = -0.000707551 Jy
! Clean residual min=-0.001755 max=0.002094 Jy/beam
! Clean residual mean=-0.000004 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.52161 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 199 components and 0.52161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061702Jy  sigma=1.287017
! Fit after  self-cal, rms=0.061697Jy  sigma=1.286955
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (34.6, -27.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177119 Jy
! Component: 100  -  total flux cleaned = 0.00235165 Jy
! Component: 150  -  total flux cleaned = 0.00281551 Jy
! Component: 200  -  total flux cleaned = 0.00297824 Jy
! Total flux subtracted in 200 components = 0.00297824 Jy
! Clean residual min=-0.001553 max=0.001402 Jy/beam
! Clean residual mean=-0.000004 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.524588 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 247 components and 0.524588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061654Jy  sigma=1.285955
! Fit after  self-cal, rms=0.061652Jy  sigma=1.285917
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.977 mas, bmaj=1.877 mas, bpa=-0.3781 degrees
! Estimated noise=0.263321 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.977 x 1.877 at -0.3781 degrees (North through East)
! Clean map  min=-0.0014893  max=0.42614 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7808 mas, bmaj=1.556 mas, bpa=-2.833 degrees
! Estimated noise=0.479171 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.322771 Jy
! Component: 100  -  total flux cleaned = 0.394456 Jy
! Component: 150  -  total flux cleaned = 0.423016 Jy
! Component: 200  -  total flux cleaned = 0.441822 Jy
! Total flux subtracted in 200 components = 0.441822 Jy
! Clean residual min=-0.005960 max=0.010330 Jy/beam
! Clean residual mean=-0.000014 rms=0.001446 Jy/beam
! Combined flux in latest and established models = 0.441822 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.441822 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.977 mas, bmaj=1.877 mas, bpa=-0.3781 degrees
! Estimated noise=0.263321 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.020561 Jy
! Component: 100  -  total flux cleaned = 0.0337836 Jy
! Component: 150  -  total flux cleaned = 0.0429977 Jy
! Component: 200  -  total flux cleaned = 0.0497437 Jy
! Total flux subtracted in 200 components = 0.0497437 Jy
! Clean residual min=-0.002776 max=0.003903 Jy/beam
! Clean residual mean=-0.000011 rms=0.000787 Jy/beam
! Combined flux in latest and established models = 0.491566 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 67 components and 0.491566 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00513002 Jy
! Component: 100  -  total flux cleaned = 0.00907857 Jy
! Component: 150  -  total flux cleaned = 0.012215 Jy
! Component: 200  -  total flux cleaned = 0.014719 Jy
! Total flux subtracted in 200 components = 0.014719 Jy
! Clean residual min=-0.002112 max=0.002142 Jy/beam
! Clean residual mean=-0.000006 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.506285 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 91 components and 0.506285 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.11 mas, bmaj=2.899 mas, bpa=-2.614 degrees
! Estimated noise=0.324721 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00313111 Jy
! Component: 100  -  total flux cleaned = 0.0053492 Jy
! Component: 150  -  total flux cleaned = 0.0070749 Jy
! Component: 200  -  total flux cleaned = 0.00851843 Jy
! Total flux subtracted in 200 components = 0.00851843 Jy
! Clean residual min=-0.001813 max=0.001680 Jy/beam
! Clean residual mean=-0.000008 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.514803 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129997 Jy
! Component: 100  -  total flux cleaned = 0.00243117 Jy
! Component: 150  -  total flux cleaned = 0.00347275 Jy
! Component: 200  -  total flux cleaned = 0.0043999 Jy
! Total flux subtracted in 200 components = 0.0043999 Jy
! Clean residual min=-0.001598 max=0.001440 Jy/beam
! Clean residual mean=-0.000007 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.519203 Jy
! Adding 95 model components to the UV plane model.
! The established model now contains 172 components and 0.519203 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.977 mas, bmaj=1.877 mas, bpa=-0.3781 degrees
! Estimated noise=0.263321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000853116 Jy
! Component: 100  -  total flux cleaned = 0.00157597 Jy
! Component: 150  -  total flux cleaned = 0.00221662 Jy
! Component: 200  -  total flux cleaned = 0.00267677 Jy
! Total flux subtracted in 200 components = 0.00267677 Jy
! Clean residual min=-0.001638 max=0.001451 Jy/beam
! Clean residual mean=-0.000003 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.52188 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 202 components and 0.52188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061725Jy  sigma=1.287033
! Fit after  self-cal, rms=0.061705Jy  sigma=1.286728
wmodel /J2254+1341_X_map.mod
! wmodel: Unable to open new model file: /J2254+1341_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J2254+1341_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.977 x 1.877 at -0.3781 degrees (North through East)
! Clean map  min=-0.0014919  max=0.42786 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2254+1341_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.427855 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000355695 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.249403 0.249403 0.498806 0.997612 1.99522 3.99045 7.98089 15.9618 31.9236 63.8472
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.427 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1202.87 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J2254+1341_X_dfm.log closed on Thu May 19 20:38:50 2016