! Started logfile: /scr/pima/bg219b_uvs/J2249-1251_X_dfm.log on Thu May 19 20:38:12 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J2249-1251_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J2249-1251_X_uva.fits
! AN table 1: 51 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.704575 visibilities/baseline/integration-bin.
! Found source: J2249-1251
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19404 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2249-1251_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001704Jy  sigma=23.770124
! Fit after  self-cal, rms=0.931154Jy  sigma=22.082915
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6171 mas, bmaj=1.793 mas, bpa=-6.902 degrees
! Estimated noise=0.420289 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0489709 Jy
! Component: 100  -  total flux cleaned = 0.0639786 Jy
! Total flux subtracted in 100 components = 0.0639786 Jy
! Clean residual min=-0.004075 max=0.007700 Jy/beam
! Clean residual mean=0.000004 rms=0.001025 Jy/beam
! Combined flux in latest and established models = 0.0639786 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0639786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065716Jy  sigma=1.442704
! Fit after  self-cal, rms=0.065005Jy  sigma=1.428340
! Inverting map 
! Added new window around map position (-0.6, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00875909 Jy
! Component: 100  -  total flux cleaned = 0.0144004 Jy
! Total flux subtracted in 100 components = 0.0144004 Jy
! Clean residual min=-0.002985 max=0.005605 Jy/beam
! Clean residual mean=0.000003 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.078379 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 27 components and 0.078379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063154Jy  sigma=1.378109
! Fit after  self-cal, rms=0.063128Jy  sigma=1.376853
! Inverting map 
! Added new window around map position (0.8, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00539868 Jy
! Component: 100  -  total flux cleaned = 0.00884509 Jy
! Total flux subtracted in 100 components = 0.00884509 Jy
! Clean residual min=-0.002535 max=0.002567 Jy/beam
! Clean residual mean=0.000002 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.0872241 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 37 components and 0.0872241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062527Jy  sigma=1.360976
! Fit after  self-cal, rms=0.062559Jy  sigma=1.360547
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8547 mas, bmaj=2.289 mas, bpa=-9.482 degrees
! Estimated noise=0.228016 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00361777 Jy
! Component: 100  -  total flux cleaned = 0.00573753 Jy
! Component: 150  -  total flux cleaned = 0.00710341 Jy
! Component: 200  -  total flux cleaned = 0.00801097 Jy
! Total flux subtracted in 200 components = 0.00801097 Jy
! Clean residual min=-0.002028 max=0.001819 Jy/beam
! Clean residual mean=0.000002 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.0952351 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 57 components and 0.0952351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062334Jy  sigma=1.354936
! Fit after  self-cal, rms=0.062329Jy  sigma=1.354601
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8547 x 2.289 at -9.482 degrees (North through East)
! Clean map  min=-0.0018606  max=0.066643 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.08     KP        0.98     
!   LA        0.95     MK        1.05     NL        1.02     OV        0.98     
!   PT        1.04     SC        1.09     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.01     KP        1.02     
!   LA        0.97     MK        1.07     NL        1.08     OV        1.02     
!   PT        1.01     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        1.02     KP        1.00     
!   LA        0.98     MK        1.05     NL        1.10     OV        1.01     
!   PT        1.11     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.90     HN        1.04     KP        1.05     
!   LA        1.01     MK        0.97     NL        1.14     OV        0.98     
!   PT        1.06     SC        1.11     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.92     HN        1.03     KP        1.10     
!   LA        1.05     MK        1.01     NL        1.00     OV        1.02     
!   PT        1.04     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.96     HN        1.04     KP        1.06     
!   LA        0.96     MK        1.07     NL        1.01     OV        0.99     
!   PT        1.00     SC        0.83     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.00     HN        0.94     KP        1.01     
!   LA        1.02     MK        1.00     NL        1.01     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.90     HN        0.93     KP        0.98     
!   LA        0.89     MK        1.03     NL        1.01     OV        0.96     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.93     HN        0.88     KP        0.95     
!   LA        1.02     MK        0.92     NL        1.01     OV        0.98     
!   PT        0.97     SC        0.86     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.94     HN        1.00     KP        0.97     
!   LA        0.91     MK        1.00     NL        0.98     OV        0.95     
!   PT        0.93     SC        0.86     
! 
! 
! Fit before self-cal, rms=0.062329Jy  sigma=1.354601
! Fit after  self-cal, rms=0.061564Jy  sigma=1.348404
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8576 mas, bmaj=2.29 mas, bpa=-9.282 degrees
! Estimated noise=0.228812 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000628993 Jy
! Component: 100  -  total flux cleaned = 0.000724272 Jy
! Component: 150  -  total flux cleaned = 0.000825498 Jy
! Component: 200  -  total flux cleaned = 0.000878374 Jy
! Total flux subtracted in 200 components = 0.000878374 Jy
! Clean residual min=-0.001567 max=0.001654 Jy/beam
! Clean residual mean=0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.0961134 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 68 components and 0.0961134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061546Jy  sigma=1.348037
! Fit after  self-cal, rms=0.061567Jy  sigma=1.347843
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061567Jy  sigma=1.347843
! Fit after  self-cal, rms=0.061744Jy  sigma=1.345308
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8569 mas, bmaj=2.279 mas, bpa=-9.209 degrees
! Estimated noise=0.22868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000379177 Jy
! Component: 100  -  total flux cleaned = 0.000482683 Jy
! Component: 150  -  total flux cleaned = 0.000541687 Jy
! Component: 200  -  total flux cleaned = 0.000568012 Jy
! Total flux subtracted in 200 components = 0.000568012 Jy
! Clean residual min=-0.001460 max=0.001582 Jy/beam
! Clean residual mean=0.000001 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.0966814 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 72 components and 0.0966814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061735Jy  sigma=1.345109
! Fit after  self-cal, rms=0.061747Jy  sigma=1.344849
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-20.6, 24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000840062 Jy
! Component: 100  -  total flux cleaned = 0.00111071 Jy
! Component: 150  -  total flux cleaned = 0.00129105 Jy
! Component: 200  -  total flux cleaned = 0.00138203 Jy
! Total flux subtracted in 200 components = 0.00138203 Jy
! Clean residual min=-0.001358 max=0.001518 Jy/beam
! Clean residual mean=0.000001 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.0980635 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 85 components and 0.0980635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061705Jy  sigma=1.343898
! Fit after  self-cal, rms=0.061700Jy  sigma=1.343810
! Inverting map 
! Added new window around map position (-10, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145435 Jy
! Component: 100  -  total flux cleaned = 0.00212221 Jy
! Component: 150  -  total flux cleaned = 0.00249149 Jy
! Component: 200  -  total flux cleaned = 0.00271564 Jy
! Total flux subtracted in 200 components = 0.00271564 Jy
! Clean residual min=-0.001342 max=0.001246 Jy/beam
! Clean residual mean=0.000001 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.100779 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 102 components and 0.100779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061656Jy  sigma=1.342806
! Fit after  self-cal, rms=0.061646Jy  sigma=1.342721
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061646Jy  sigma=1.342721
! Fit after  self-cal, rms=0.061363Jy  sigma=1.342344
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8559 mas, bmaj=2.267 mas, bpa=-9.015 degrees
! Estimated noise=0.22769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000517616 Jy
! Component: 100  -  total flux cleaned = 0.000753895 Jy
! Component: 150  -  total flux cleaned = 0.000949882 Jy
! Component: 200  -  total flux cleaned = 0.00107049 Jy
! Total flux subtracted in 200 components = 0.00107049 Jy
! Clean residual min=-0.001344 max=0.001257 Jy/beam
! Clean residual mean=0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.10185 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 107 components and 0.10185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061347Jy  sigma=1.341985
! Fit after  self-cal, rms=0.061347Jy  sigma=1.341949
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00019292 Jy
! Component: 100  -  total flux cleaned = 0.00034697 Jy
! Component: 150  -  total flux cleaned = 0.00047335 Jy
! Component: 200  -  total flux cleaned = 0.000592784 Jy
! Total flux subtracted in 200 components = 0.000592784 Jy
! Clean residual min=-0.001304 max=0.001272 Jy/beam
! Clean residual mean=0.000001 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.102442 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 110 components and 0.102442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061337Jy  sigma=1.341718
! Fit after  self-cal, rms=0.061335Jy  sigma=1.341709
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061335Jy  sigma=1.341709
! Fit after  self-cal, rms=0.061315Jy  sigma=1.341692
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.087 mas, bmaj=4.055 mas, bpa=1.378 degrees
! Estimated noise=0.282772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000200861 Jy
! Component: 100  -  total flux cleaned = 0.00040951 Jy
! Component: 150  -  total flux cleaned = 0.000630958 Jy
! Component: 200  -  total flux cleaned = 0.000802779 Jy
! Total flux subtracted in 200 components = 0.000802779 Jy
! Clean residual min=-0.001334 max=0.001320 Jy/beam
! Clean residual mean=0.000002 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.103245 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 130 components and 0.103245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061314Jy  sigma=1.341640
! Fit after  self-cal, rms=0.061314Jy  sigma=1.341625
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119888 Jy
! Component: 100  -  total flux cleaned = 0.00026404 Jy
! Component: 150  -  total flux cleaned = 0.000362988 Jy
! Component: 200  -  total flux cleaned = 0.000464439 Jy
! Total flux subtracted in 200 components = 0.000464439 Jy
! Clean residual min=-0.001296 max=0.001312 Jy/beam
! Clean residual mean=0.000002 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.10371 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 133 components and 0.10371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061314Jy  sigma=1.341611
! Fit after  self-cal, rms=0.061315Jy  sigma=1.341604
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.855 mas, bmaj=2.262 mas, bpa=-8.96 degrees
! Estimated noise=0.227687 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.855 x 2.262 at -8.96 degrees (North through East)
! Clean map  min=-0.0015013  max=0.065936 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6154 mas, bmaj=1.777 mas, bpa=-6.115 degrees
! Estimated noise=0.419565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0488867 Jy
! Component: 100  -  total flux cleaned = 0.0650631 Jy
! Component: 150  -  total flux cleaned = 0.0744508 Jy
! Component: 200  -  total flux cleaned = 0.0808204 Jy
! Total flux subtracted in 200 components = 0.0808204 Jy
! Clean residual min=-0.003123 max=0.003498 Jy/beam
! Clean residual mean=0.000003 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.0808204 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0808204 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.855 mas, bmaj=2.262 mas, bpa=-8.96 degrees
! Estimated noise=0.227687 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00634207 Jy
! Component: 100  -  total flux cleaned = 0.00990107 Jy
! Component: 150  -  total flux cleaned = 0.0122534 Jy
! Component: 200  -  total flux cleaned = 0.0140223 Jy
! Total flux subtracted in 200 components = 0.0140223 Jy
! Clean residual min=-0.001600 max=0.001593 Jy/beam
! Clean residual mean=0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.0948427 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 56 components and 0.0948427 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.087 mas, bmaj=4.055 mas, bpa=1.378 degrees
! Estimated noise=0.282772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189125 Jy
! Component: 100  -  total flux cleaned = 0.00301772 Jy
! Component: 150  -  total flux cleaned = 0.00374992 Jy
! Component: 200  -  total flux cleaned = 0.00440318 Jy
! Total flux subtracted in 200 components = 0.00440318 Jy
! Clean residual min=-0.001483 max=0.001312 Jy/beam
! Clean residual mean=0.000002 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.0992459 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000538297 Jy
! Component: 100  -  total flux cleaned = 0.00104902 Jy
! Component: 150  -  total flux cleaned = 0.00151042 Jy
! Component: 200  -  total flux cleaned = 0.00192833 Jy
! Total flux subtracted in 200 components = 0.00192833 Jy
! Clean residual min=-0.001402 max=0.001256 Jy/beam
! Clean residual mean=0.000002 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.101174 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 111 components and 0.101174 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.855 mas, bmaj=2.262 mas, bpa=-8.96 degrees
! Estimated noise=0.227687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107151 Jy
! Component: 100  -  total flux cleaned = 0.000138204 Jy
! Component: 150  -  total flux cleaned = 0.000340518 Jy
! Component: 200  -  total flux cleaned = 0.000500669 Jy
! Total flux subtracted in 200 components = 0.000500669 Jy
! Clean residual min=-0.001287 max=0.001278 Jy/beam
! Clean residual mean=0.000001 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.101675 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 132 components and 0.101675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061336Jy  sigma=1.342154
! Fit after  self-cal, rms=0.061325Jy  sigma=1.341939
wmodel /J2249-1251_X_map.mod
! wmodel: Unable to open new model file: /J2249-1251_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J2249-1251_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.855 x 2.262 at -8.96 degrees (North through East)
! Clean map  min=-0.0011614  max=0.065662 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2249-1251_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0656618 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000302889 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.38386 1.38386 2.76772 5.53543 11.0709 22.1417 44.2835 88.5669
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.065 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  216.785 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J2249-1251_X_dfm.log closed on Thu May 19 20:38:15 2016