! Started logfile: /scr/pima/bg219b_uvs/J2236-2309_X_uvs.log on Thu Apr  7 02:05:39 2016
obs /scr/pima/bg219b_uvs/J2236-2309_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J2236-2309_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.872487 visibilities/baseline/integration-bin.
! Found source: J2236-2309
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19788 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J2236-2309_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.030147Jy  sigma=23.485577
! Fit after  self-cal, rms=0.813303Jy  sigma=18.376055
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6339 mas, bmaj=1.728 mas, bpa=-8.259 degrees
! Estimated noise=0.498623 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135696 Jy
! Component: 100  -  total flux cleaned = 0.177404 Jy
! Total flux subtracted in 100 components = 0.177404 Jy
! Clean residual min=-0.006677 max=0.020044 Jy/beam
! Clean residual mean=-0.000005 rms=0.002212 Jy/beam
! Combined flux in latest and established models = 0.177404 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.177404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078064Jy  sigma=1.737254
! Fit after  self-cal, rms=0.077924Jy  sigma=1.734428
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0233369 Jy
! Component: 100  -  total flux cleaned = 0.0363366 Jy
! Total flux subtracted in 100 components = 0.0363366 Jy
! Clean residual min=-0.004499 max=0.008112 Jy/beam
! Clean residual mean=-0.000005 rms=0.001247 Jy/beam
! Combined flux in latest and established models = 0.213741 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.213741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.067796Jy  sigma=1.459275
! Fit after  self-cal, rms=0.067741Jy  sigma=1.458166
! Inverting map 
! Added new window around map position (-1.2, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00950632 Jy
! Component: 100  -  total flux cleaned = 0.0162434 Jy
! Total flux subtracted in 100 components = 0.0162434 Jy
! Clean residual min=-0.003952 max=0.005337 Jy/beam
! Clean residual mean=-0.000004 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.229984 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 27 components and 0.229984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065523Jy  sigma=1.397711
! Fit after  self-cal, rms=0.065472Jy  sigma=1.396310
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8139 mas, bmaj=2.065 mas, bpa=-5.474 degrees
! Estimated noise=0.303181 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00873071 Jy
! Component: 100  -  total flux cleaned = 0.0141672 Jy
! Component: 150  -  total flux cleaned = 0.0177887 Jy
! Component: 200  -  total flux cleaned = 0.0202229 Jy
! Total flux subtracted in 200 components = 0.0202229 Jy
! Clean residual min=-0.002813 max=0.003819 Jy/beam
! Clean residual mean=-0.000010 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.250207 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 53 components and 0.250207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064275Jy  sigma=1.362769
! Fit after  self-cal, rms=0.064237Jy  sigma=1.361589
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8139 x 2.065 at -5.474 degrees (North through East)
! Clean map  min=-0.0029128  max=0.18559 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.05     KP        0.96     
!   LA        0.98     MK        0.98     NL        1.02     OV        0.96     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.08     KP        0.97     
!   LA        1.00     MK        1.02     NL        1.02     OV        1.00     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.08     KP        1.01     
!   LA        0.99     MK        1.03     NL        1.05     OV        1.01     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.03     KP        0.98     
!   LA        0.97     MK        0.98     NL        1.00     OV        0.98     
!   PT        0.97     SC        0.97     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.06     KP        0.98     
!   LA        0.99     MK        1.00     NL        1.04     OV        0.98     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.10     KP        1.02     
!   LA        1.03     MK        1.02     NL        1.06     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.08     KP        0.98     
!   LA        0.97     MK        1.03     NL        1.02     OV        0.96     
!   PT        0.97     SC        0.98     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064237Jy  sigma=1.361589
! Fit after  self-cal, rms=0.064658Jy  sigma=1.345824
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8178 mas, bmaj=2.065 mas, bpa=-5.184 degrees
! Estimated noise=0.302435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00036183 Jy
! Component: 100  -  total flux cleaned = -0.000393917 Jy
! Component: 150  -  total flux cleaned = -0.000421004 Jy
! Component: 200  -  total flux cleaned = -0.00042073 Jy
! Total flux subtracted in 200 components = -0.00042073 Jy
! Clean residual min=-0.002457 max=0.002325 Jy/beam
! Clean residual mean=-0.000007 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.249786 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 62 components and 0.249786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064630Jy  sigma=1.345294
! Fit after  self-cal, rms=0.064653Jy  sigma=1.345232
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064653Jy  sigma=1.345232
! Fit after  self-cal, rms=0.064796Jy  sigma=1.338788
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8181 mas, bmaj=2.064 mas, bpa=-5.156 degrees
! Estimated noise=0.302282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000211705 Jy
! Component: 100  -  total flux cleaned = -0.000233084 Jy
! Component: 150  -  total flux cleaned = -0.000251809 Jy
! Component: 200  -  total flux cleaned = -0.00025218 Jy
! Total flux subtracted in 200 components = -0.00025218 Jy
! Clean residual min=-0.002096 max=0.002161 Jy/beam
! Clean residual mean=-0.000007 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.249534 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 64 components and 0.249534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064784Jy  sigma=1.338544
! Fit after  self-cal, rms=0.064791Jy  sigma=1.338516
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184687 Jy
! Component: 100  -  total flux cleaned = 0.00213443 Jy
! Component: 150  -  total flux cleaned = 0.00200906 Jy
! Component: 200  -  total flux cleaned = 0.00200881 Jy
! Total flux subtracted in 200 components = 0.00200881 Jy
! Clean residual min=-0.002036 max=0.002064 Jy/beam
! Clean residual mean=-0.000007 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.251543 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 81 components and 0.251543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064730Jy  sigma=1.337368
! Fit after  self-cal, rms=0.064728Jy  sigma=1.337290
! Inverting map 
! Added new window around map position (-2.8, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203206 Jy
! Component: 100  -  total flux cleaned = 0.00321211 Jy
! Component: 150  -  total flux cleaned = 0.00375228 Jy
! Component: 200  -  total flux cleaned = 0.00408551 Jy
! Total flux subtracted in 200 components = 0.00408551 Jy
! Clean residual min=-0.001854 max=0.001687 Jy/beam
! Clean residual mean=-0.000004 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.255628 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 99 components and 0.255628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064657Jy  sigma=1.335506
! Fit after  self-cal, rms=0.064653Jy  sigma=1.335383
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064653Jy  sigma=1.335383
! Fit after  self-cal, rms=0.064977Jy  sigma=1.334364
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8178 mas, bmaj=2.063 mas, bpa=-5.169 degrees
! Estimated noise=0.301737 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000513307 Jy
! Component: 100  -  total flux cleaned = 0.000668956 Jy
! Component: 150  -  total flux cleaned = 0.000761791 Jy
! Component: 200  -  total flux cleaned = 0.000824743 Jy
! Total flux subtracted in 200 components = 0.000824743 Jy
! Clean residual min=-0.001761 max=0.001644 Jy/beam
! Clean residual mean=-0.000004 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.256453 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 114 components and 0.256453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064957Jy  sigma=1.333978
! Fit after  self-cal, rms=0.064963Jy  sigma=1.333961
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140737 Jy
! Component: 100  -  total flux cleaned = 0.00014067 Jy
! Component: 150  -  total flux cleaned = 0.000175671 Jy
! Component: 200  -  total flux cleaned = 0.000175827 Jy
! Total flux subtracted in 200 components = 0.000175827 Jy
! Clean residual min=-0.001733 max=0.001611 Jy/beam
! Clean residual mean=-0.000004 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.256629 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 118 components and 0.256629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064953Jy  sigma=1.333766
! Fit after  self-cal, rms=0.064953Jy  sigma=1.333761
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064953Jy  sigma=1.333761
! Fit after  self-cal, rms=0.064977Jy  sigma=1.333731
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.22 mas, bmaj=4.963 mas, bpa=0.1171 degrees
! Estimated noise=0.387555 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142085 Jy
! Component: 100  -  total flux cleaned = 0.000161307 Jy
! Component: 150  -  total flux cleaned = 0.000212962 Jy
! Component: 200  -  total flux cleaned = 0.000244172 Jy
! Total flux subtracted in 200 components = 0.000244172 Jy
! Clean residual min=-0.002027 max=0.001575 Jy/beam
! Clean residual mean=-0.000008 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.256873 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 130 components and 0.256873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064978Jy  sigma=1.333716
! Fit after  self-cal, rms=0.064978Jy  sigma=1.333699
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.81038e-05 Jy
! Component: 100  -  total flux cleaned = 6.44351e-05 Jy
! Component: 150  -  total flux cleaned = 5.21132e-05 Jy
! Component: 200  -  total flux cleaned = 4.06725e-05 Jy
! Total flux subtracted in 200 components = 4.06725e-05 Jy
! Clean residual min=-0.002012 max=0.001555 Jy/beam
! Clean residual mean=-0.000008 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.256914 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 133 components and 0.256914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064981Jy  sigma=1.333757
! Fit after  self-cal, rms=0.064981Jy  sigma=1.333754
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8177 mas, bmaj=2.063 mas, bpa=-5.162 degrees
! Estimated noise=0.301531 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8177 x 2.063 at -5.162 degrees (North through East)
! Clean map  min=-0.0015064  max=0.18505 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6367 mas, bmaj=1.721 mas, bpa=-7.911 degrees
! Estimated noise=0.497221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135295 Jy
! Component: 100  -  total flux cleaned = 0.17746 Jy
! Component: 150  -  total flux cleaned = 0.200436 Jy
! Component: 200  -  total flux cleaned = 0.21324 Jy
! Total flux subtracted in 200 components = 0.21324 Jy
! Clean residual min=-0.003880 max=0.007031 Jy/beam
! Clean residual mean=-0.000005 rms=0.001051 Jy/beam
! Combined flux in latest and established models = 0.21324 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.21324 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8177 mas, bmaj=2.063 mas, bpa=-5.162 degrees
! Estimated noise=0.301531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135317 Jy
! Component: 100  -  total flux cleaned = 0.0212447 Jy
! Component: 150  -  total flux cleaned = 0.0262944 Jy
! Component: 200  -  total flux cleaned = 0.0297926 Jy
! Total flux subtracted in 200 components = 0.0297926 Jy
! Clean residual min=-0.002281 max=0.002301 Jy/beam
! Clean residual mean=-0.000009 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.243033 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 73 components and 0.243033 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.22 mas, bmaj=4.963 mas, bpa=0.1171 degrees
! Estimated noise=0.387555 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00434051 Jy
! Component: 100  -  total flux cleaned = 0.00706635 Jy
! Component: 150  -  total flux cleaned = 0.00904442 Jy
! Component: 200  -  total flux cleaned = 0.0104992 Jy
! Total flux subtracted in 200 components = 0.0104992 Jy
! Clean residual min=-0.002191 max=0.001821 Jy/beam
! Clean residual mean=-0.000011 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.253532 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000854332 Jy
! Component: 100  -  total flux cleaned = 0.00132345 Jy
! Component: 150  -  total flux cleaned = 0.00174276 Jy
! Component: 200  -  total flux cleaned = 0.00206581 Jy
! Total flux subtracted in 200 components = 0.00206581 Jy
! Clean residual min=-0.002031 max=0.001593 Jy/beam
! Clean residual mean=-0.000009 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.255598 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 116 components and 0.255598 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8177 mas, bmaj=2.063 mas, bpa=-5.162 degrees
! Estimated noise=0.301531 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00036978 Jy
! Component: 100  -  total flux cleaned = 0.000372955 Jy
! Component: 150  -  total flux cleaned = 0.00037361 Jy
! Component: 200  -  total flux cleaned = 0.000401092 Jy
! Total flux subtracted in 200 components = 0.000401092 Jy
! Clean residual min=-0.001613 max=0.001767 Jy/beam
! Clean residual mean=-0.000004 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.255999 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 134 components and 0.255999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064999Jy  sigma=1.334178
! Fit after  self-cal, rms=0.064989Jy  sigma=1.333999
wmodel /scr/pima/bg219b_uvs/J2236-2309_X_map.mod
! Writing 134 model components to file: /scr/pima/bg219b_uvs/J2236-2309_X_map.mod
wobs /scr/pima/bg219b_uvs/J2236-2309_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J2236-2309_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J2236-2309_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219b_uvs/J2236-2309_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000199826 Jy
! Component: 100  -  total flux cleaned = 0.000310937 Jy
! Component: 150  -  total flux cleaned = 0.000286418 Jy
! Component: 200  -  total flux cleaned = 0.000213395 Jy
! Component: 250  -  total flux cleaned = 0.000167073 Jy
! Component: 300  -  total flux cleaned = 5.56962e-05 Jy
! Component: 350  -  total flux cleaned = 1.23495e-05 Jy
! Component: 400  -  total flux cleaned = 1.26904e-05 Jy
! Component: 450  -  total flux cleaned = 7.44567e-05 Jy
! Component: 500  -  total flux cleaned = 5.42748e-05 Jy
! Component: 550  -  total flux cleaned = 3.48297e-05 Jy
! Component: 600  -  total flux cleaned = 5.40449e-05 Jy
! Component: 650  -  total flux cleaned = 5.38222e-05 Jy
! Component: 700  -  total flux cleaned = 3.48653e-05 Jy
! Component: 750  -  total flux cleaned = 7.16635e-05 Jy
! Component: 800  -  total flux cleaned = 8.94062e-05 Jy
! Component: 850  -  total flux cleaned = 7.13587e-05 Jy
! Component: 900  -  total flux cleaned = 5.40203e-05 Jy
! Component: 950  -  total flux cleaned = 7.17675e-05 Jy
! Component: 1000  -  total flux cleaned = 0.000105969 Jy
! Component: 1050  -  total flux cleaned = 8.9663e-05 Jy
! Component: 1100  -  total flux cleaned = 0.000123121 Jy
! Component: 1150  -  total flux cleaned = 0.000172273 Jy
! Component: 1200  -  total flux cleaned = 0.000204557 Jy
! Component: 1250  -  total flux cleaned = 0.000172754 Jy
! Component: 1300  -  total flux cleaned = 0.000251828 Jy
! Component: 1350  -  total flux cleaned = 0.000220817 Jy
! Component: 1400  -  total flux cleaned = 0.000297987 Jy
! Component: 1450  -  total flux cleaned = 0.000297862 Jy
! Component: 1500  -  total flux cleaned = 0.000313097 Jy
! Component: 1550  -  total flux cleaned = 0.000313024 Jy
! Component: 1600  -  total flux cleaned = 0.00028354 Jy
! Component: 1650  -  total flux cleaned = 0.000371495 Jy
! Component: 1700  -  total flux cleaned = 0.000342352 Jy
! Component: 1750  -  total flux cleaned = 0.000313666 Jy
! Component: 1800  -  total flux cleaned = 0.000342425 Jy
! Component: 1850  -  total flux cleaned = 0.000370699 Jy
! Component: 1900  -  total flux cleaned = 0.000384649 Jy
! Component: 1950  -  total flux cleaned = 0.000370671 Jy
! Component: 2000  -  total flux cleaned = 0.000384348 Jy
! Component: 2050  -  total flux cleaned = 0.000357138 Jy
! Component: 2100  -  total flux cleaned = 0.000357213 Jy
! Component: 2150  -  total flux cleaned = 0.000424085 Jy
! Component: 2200  -  total flux cleaned = 0.000437311 Jy
! Component: 2250  -  total flux cleaned = 0.000424103 Jy
! Component: 2300  -  total flux cleaned = 0.000437299 Jy
! Component: 2350  -  total flux cleaned = 0.000437313 Jy
! Component: 2400  -  total flux cleaned = 0.000437268 Jy
! Component: 2450  -  total flux cleaned = 0.000450002 Jy
! Component: 2500  -  total flux cleaned = 0.000399544 Jy
! Component: 2550  -  total flux cleaned = 0.000412039 Jy
! Component: 2600  -  total flux cleaned = 0.000399546 Jy
! Component: 2650  -  total flux cleaned = 0.000350347 Jy
! Component: 2700  -  total flux cleaned = 0.000325876 Jy
! Component: 2750  -  total flux cleaned = 0.000301664 Jy
! Component: 2800  -  total flux cleaned = 0.000253402 Jy
! Component: 2850  -  total flux cleaned = 0.000241432 Jy
! Component: 2900  -  total flux cleaned = 0.000182015 Jy
! Component: 2950  -  total flux cleaned = 0.000158448 Jy
! Component: 3000  -  total flux cleaned = 0.00014668 Jy
! Component: 3050  -  total flux cleaned = 0.000158183 Jy
! Component: 3100  -  total flux cleaned = 8.86648e-05 Jy
! Component: 3150  -  total flux cleaned = 3.12321e-05 Jy
! Component: 3200  -  total flux cleaned = 1.98597e-05 Jy
! Component: 3250  -  total flux cleaned = 1.98659e-05 Jy
! Component: 3300  -  total flux cleaned = 5.37535e-05 Jy
! Component: 3350  -  total flux cleaned = 3.1357e-05 Jy
! Component: 3400  -  total flux cleaned = 9.28293e-06 Jy
! Component: 3450  -  total flux cleaned = 2.04465e-05 Jy
! Component: 3500  -  total flux cleaned = -1.2424e-05 Jy
! Component: 3550  -  total flux cleaned = -1.55388e-06 Jy
! Component: 3600  -  total flux cleaned = 9.27973e-06 Jy
! Component: 3650  -  total flux cleaned = -1.50925e-06 Jy
! Component: 3700  -  total flux cleaned = 9.18269e-06 Jy
! Component: 3750  -  total flux cleaned = 9.16199e-06 Jy
! Component: 3800  -  total flux cleaned = -1.48264e-06 Jy
! Component: 3850  -  total flux cleaned = 9.14898e-06 Jy
! Component: 3900  -  total flux cleaned = 5.11473e-05 Jy
! Component: 3950  -  total flux cleaned = 5.11438e-05 Jy
! Component: 4000  -  total flux cleaned = 6.15301e-05 Jy
! Component: 4050  -  total flux cleaned = 9.24279e-05 Jy
! Total flux subtracted in 4096 components = 5.13589e-05 Jy
! Clean residual min=-0.000536 max=0.000746 Jy/beam
! Clean residual mean=-0.000001 rms=0.000171 Jy/beam
! Combined flux in latest and established models = 0.25605 Jy
keep
! Adding 269 model components to the UV plane model.
! The established model now contains 403 components and 0.25605 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J2236-2309_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8177 x 2.063 at -5.162 degrees (North through East)
! Clean map  min=-0.0010436  max=0.18656 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2236-2309_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.186559 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00016636 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.267519 0.267519 0.535037 1.07007 2.14015 4.2803 8.5606 17.1212 34.2424 68.4848
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.186 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1121.42 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J2236-2309_X_uvs.log closed on Thu Apr  7 02:05:44 2016