! Started logfile: /scr/pima/bg219b_uvs/J2236-2309_X_dfm.log on Thu May 19 20:37:21 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J2236-2309_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J2236-2309_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.872487 visibilities/baseline/integration-bin.
! Found source: J2236-2309
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19788 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2236-2309_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.026442Jy  sigma=22.547887
! Fit after  self-cal, rms=0.808426Jy  sigma=17.608268
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6164 mas, bmaj=1.661 mas, bpa=-6.682 degrees
! Estimated noise=0.424861 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137976 Jy
! Component: 100  -  total flux cleaned = 0.178156 Jy
! Total flux subtracted in 100 components = 0.178156 Jy
! Clean residual min=-0.007803 max=0.023843 Jy/beam
! Clean residual mean=-0.000013 rms=0.002126 Jy/beam
! Combined flux in latest and established models = 0.178156 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.178156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085751Jy  sigma=1.811406
! Fit after  self-cal, rms=0.085686Jy  sigma=1.810472
! Inverting map 
! Added new window around map position (-0.6, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0252604 Jy
! Component: 100  -  total flux cleaned = 0.039869 Jy
! Total flux subtracted in 100 components = 0.039869 Jy
! Clean residual min=-0.005838 max=0.008770 Jy/beam
! Clean residual mean=-0.000009 rms=0.001216 Jy/beam
! Combined flux in latest and established models = 0.218025 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 11 components and 0.218025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074344Jy  sigma=1.518975
! Fit after  self-cal, rms=0.074124Jy  sigma=1.514721
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00929328 Jy
! Component: 100  -  total flux cleaned = 0.0154074 Jy
! Total flux subtracted in 100 components = 0.0154074 Jy
! Clean residual min=-0.004661 max=0.005960 Jy/beam
! Clean residual mean=-0.000007 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.233432 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 20 components and 0.233433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072063Jy  sigma=1.458636
! Fit after  self-cal, rms=0.072038Jy  sigma=1.458096
! Inverting map 
! Added new window around map position (-1.4, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00624505 Jy
! Component: 100  -  total flux cleaned = 0.010297 Jy
! Total flux subtracted in 100 components = 0.010297 Jy
! Clean residual min=-0.004031 max=0.004454 Jy/beam
! Clean residual mean=-0.000006 rms=0.000875 Jy/beam
! Combined flux in latest and established models = 0.24373 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 30 components and 0.24373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071101Jy  sigma=1.435311
! Fit after  self-cal, rms=0.071045Jy  sigma=1.433779
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8082 mas, bmaj=2.051 mas, bpa=-5.447 degrees
! Estimated noise=0.240665 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00654946 Jy
! Component: 100  -  total flux cleaned = 0.0105276 Jy
! Component: 150  -  total flux cleaned = 0.0133461 Jy
! Component: 200  -  total flux cleaned = 0.0154069 Jy
! Total flux subtracted in 200 components = 0.0154069 Jy
! Clean residual min=-0.002869 max=0.004474 Jy/beam
! Clean residual mean=-0.000012 rms=0.000763 Jy/beam
! Combined flux in latest and established models = 0.259136 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 62 components and 0.259137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070367Jy  sigma=1.417788
! Fit after  self-cal, rms=0.070320Jy  sigma=1.416107
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8082 x 2.051 at -5.447 degrees (North through East)
! Clean map  min=-0.0028425  max=0.19198 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.07     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.03     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        1.10     KP        0.98     
!   LA        1.01     MK        1.04     NL        1.03     OV        1.02     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        1.11     KP        1.03     
!   LA        1.00     MK        1.04     NL        1.06     OV        1.03     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.06     KP        0.99     
!   LA        0.98     MK        0.99     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.14     KP        0.96     
!   LA        0.97     MK        0.98     NL        1.00     OV        1.00     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.08     KP        1.00     
!   LA        1.00     MK        1.01     NL        1.04     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.12     KP        1.03     
!   LA        1.05     MK        1.03     NL        1.07     OV        1.02     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.11     KP        0.99     
!   LA        0.98     MK        1.04     NL        1.02     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.10     KP        0.97     
!   LA        0.98     MK        1.00     NL        1.03     OV        1.01     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.05     KP        0.98     
!   LA        0.94     MK        0.97     NL        1.02     OV        0.97     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.10     KP        0.95     
!   LA        0.94     MK        1.02     NL        1.02     OV        0.99     
!   PT        0.96     SC        0.92     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        0.99     KP        0.94     
!   LA        0.98     MK        0.94     NL        0.96     OV        0.94     
!   PT        0.91     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.070320Jy  sigma=1.416107
! Fit after  self-cal, rms=0.070218Jy  sigma=1.390815
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8119 mas, bmaj=2.05 mas, bpa=-5.253 degrees
! Estimated noise=0.24102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000522341 Jy
! Component: 100  -  total flux cleaned = -0.000523848 Jy
! Component: 150  -  total flux cleaned = -0.000488184 Jy
! Component: 200  -  total flux cleaned = -0.000429827 Jy
! Total flux subtracted in 200 components = -0.000429827 Jy
! Clean residual min=-0.002234 max=0.002224 Jy/beam
! Clean residual mean=-0.000005 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.258707 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 73 components and 0.258707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070171Jy  sigma=1.389996
! Fit after  self-cal, rms=0.070196Jy  sigma=1.389853
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070196Jy  sigma=1.389853
! Fit after  self-cal, rms=0.070346Jy  sigma=1.384052
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8119 mas, bmaj=2.049 mas, bpa=-5.29 degrees
! Estimated noise=0.240734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000138964 Jy
! Component: 100  -  total flux cleaned = -8.56052e-05 Jy
! Component: 150  -  total flux cleaned = -6.2322e-05 Jy
! Component: 200  -  total flux cleaned = -1.79672e-05 Jy
! Total flux subtracted in 200 components = -1.79672e-05 Jy
! Clean residual min=-0.001627 max=0.001779 Jy/beam
! Clean residual mean=-0.000005 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.258689 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 85 components and 0.258689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070325Jy  sigma=1.383703
! Fit after  self-cal, rms=0.070331Jy  sigma=1.383678
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167548 Jy
! Component: 100  -  total flux cleaned = 0.00247547 Jy
! Component: 150  -  total flux cleaned = 0.00278816 Jy
! Component: 200  -  total flux cleaned = 0.00283368 Jy
! Total flux subtracted in 200 components = 0.00283368 Jy
! Clean residual min=-0.001517 max=0.001362 Jy/beam
! Clean residual mean=-0.000003 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.261522 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 106 components and 0.261523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070287Jy  sigma=1.382666
! Fit after  self-cal, rms=0.070285Jy  sigma=1.382618
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070285Jy  sigma=1.382618
! Fit after  self-cal, rms=0.070632Jy  sigma=1.381736
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8119 mas, bmaj=2.047 mas, bpa=-5.298 degrees
! Estimated noise=0.240529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.16407e-05 Jy
! Component: 100  -  total flux cleaned = 0.00017642 Jy
! Component: 150  -  total flux cleaned = 0.00025969 Jy
! Component: 200  -  total flux cleaned = 0.00033499 Jy
! Total flux subtracted in 200 components = 0.00033499 Jy
! Clean residual min=-0.001386 max=0.001262 Jy/beam
! Clean residual mean=-0.000002 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.261858 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 121 components and 0.261857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070616Jy  sigma=1.381471
! Fit after  self-cal, rms=0.070620Jy  sigma=1.381457
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.1835e-05 Jy
! Component: 100  -  total flux cleaned = 6.20729e-05 Jy
! Component: 150  -  total flux cleaned = 0.000124662 Jy
! Component: 200  -  total flux cleaned = 0.000168544 Jy
! Total flux subtracted in 200 components = 0.000168544 Jy
! Clean residual min=-0.001377 max=0.001225 Jy/beam
! Clean residual mean=-0.000002 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.262026 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 126 components and 0.262026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070612Jy  sigma=1.381328
! Fit after  self-cal, rms=0.070611Jy  sigma=1.381324
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070611Jy  sigma=1.381324
! Fit after  self-cal, rms=0.070669Jy  sigma=1.381299
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.224 mas, bmaj=4.982 mas, bpa=0.006068 degrees
! Estimated noise=0.308059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.28751e-05 Jy
! Component: 100  -  total flux cleaned = 1.6145e-05 Jy
! Component: 150  -  total flux cleaned = 6.45892e-05 Jy
! Component: 200  -  total flux cleaned = 0.000118008 Jy
! Total flux subtracted in 200 components = 0.000118008 Jy
! Clean residual min=-0.001613 max=0.001486 Jy/beam
! Clean residual mean=-0.000004 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.262144 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 135 components and 0.262144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070667Jy  sigma=1.381265
! Fit after  self-cal, rms=0.070668Jy  sigma=1.381258
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.16004e-05 Jy
! Component: 100  -  total flux cleaned = 5.94467e-05 Jy
! Component: 150  -  total flux cleaned = 8.54201e-05 Jy
! Component: 200  -  total flux cleaned = 7.73865e-05 Jy
! Total flux subtracted in 200 components = 7.73865e-05 Jy
! Clean residual min=-0.001599 max=0.001487 Jy/beam
! Clean residual mean=-0.000004 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.262221 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 138 components and 0.262221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070668Jy  sigma=1.381265
! Fit after  self-cal, rms=0.070668Jy  sigma=1.381259
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8116 mas, bmaj=2.047 mas, bpa=-5.291 degrees
! Estimated noise=0.240438 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8116 x 2.047 at -5.291 degrees (North through East)
! Clean map  min=-0.0012483  max=0.19254 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6186 mas, bmaj=1.652 mas, bpa=-6.41 degrees
! Estimated noise=0.424181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137524 Jy
! Component: 100  -  total flux cleaned = 0.179749 Jy
! Component: 150  -  total flux cleaned = 0.203531 Jy
! Component: 200  -  total flux cleaned = 0.217258 Jy
! Total flux subtracted in 200 components = 0.217258 Jy
! Clean residual min=-0.003594 max=0.007106 Jy/beam
! Clean residual mean=-0.000007 rms=0.001014 Jy/beam
! Combined flux in latest and established models = 0.217258 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.217258 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8116 mas, bmaj=2.047 mas, bpa=-5.291 degrees
! Estimated noise=0.240438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015572 Jy
! Component: 100  -  total flux cleaned = 0.023931 Jy
! Component: 150  -  total flux cleaned = 0.0291879 Jy
! Component: 200  -  total flux cleaned = 0.0327608 Jy
! Total flux subtracted in 200 components = 0.0327608 Jy
! Clean residual min=-0.002144 max=0.002065 Jy/beam
! Clean residual mean=-0.000009 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.250019 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 71 components and 0.250019 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.224 mas, bmaj=4.982 mas, bpa=0.006068 degrees
! Estimated noise=0.308059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00438263 Jy
! Component: 100  -  total flux cleaned = 0.0069387 Jy
! Component: 150  -  total flux cleaned = 0.00860829 Jy
! Component: 200  -  total flux cleaned = 0.00976723 Jy
! Total flux subtracted in 200 components = 0.00976723 Jy
! Clean residual min=-0.001931 max=0.001632 Jy/beam
! Clean residual mean=-0.000007 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.259786 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000836127 Jy
! Component: 100  -  total flux cleaned = 0.00119631 Jy
! Component: 150  -  total flux cleaned = 0.00146881 Jy
! Component: 200  -  total flux cleaned = 0.00167789 Jy
! Total flux subtracted in 200 components = 0.00167789 Jy
! Clean residual min=-0.001724 max=0.001507 Jy/beam
! Clean residual mean=-0.000005 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.261464 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 129 components and 0.261464 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8116 mas, bmaj=2.047 mas, bpa=-5.291 degrees
! Estimated noise=0.240438 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.04408e-06 Jy
! Component: 100  -  total flux cleaned = 4.74353e-05 Jy
! Component: 150  -  total flux cleaned = 9.21251e-05 Jy
! Component: 200  -  total flux cleaned = 0.000111371 Jy
! Total flux subtracted in 200 components = 0.000111371 Jy
! Clean residual min=-0.001382 max=0.001284 Jy/beam
! Clean residual mean=-0.000002 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.261575 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 145 components and 0.261575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070687Jy  sigma=1.381513
! Fit after  self-cal, rms=0.070679Jy  sigma=1.381431
wmodel /J2236-2309_X_map.mod
! wmodel: Unable to open new model file: /J2236-2309_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J2236-2309_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8116 x 2.047 at -5.291 degrees (North through East)
! Clean map  min=-0.0012734  max=0.19266 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2236-2309_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.192656 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000337391 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.52538 0.52538 1.05076 2.10152 4.20304 8.40607 16.8121 33.6243 67.2486
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.192 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  571.015 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J2236-2309_X_dfm.log closed on Thu May 19 20:37:24 2016