! Started logfile: /scr/pima/bg219b_uvs/J2225-0457_X_uvs.log on Thu Apr 7 02:05:29 2016 obs /scr/pima/bg219b_uvs/J2225-0457_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J2225-0457_X_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.371648 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2225-0457 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 11640 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J2225-0457_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 369 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 369 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 369 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 369 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 369 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 369 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 369 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.934749Jy sigma=26.355616 ! Fit after self-cal, rms=0.834313Jy sigma=10.328607 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.746 mas, bmaj=1.858 mas, bpa=6.759 degrees ! Estimated noise=0.944963 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04054 Jy ! Component: 100 - total flux cleaned = 1.32454 Jy ! Total flux subtracted in 100 components = 1.32454 Jy ! Clean residual min=-0.104708 max=0.297416 Jy/beam ! Clean residual mean=0.000258 rms=0.025578 Jy/beam ! Combined flux in latest and established models = 1.32454 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.32454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.649456Jy sigma=8.002209 ! Fit after self-cal, rms=0.649121Jy sigma=7.999472 ! Inverting map ! Added new window around map position (1.4, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.264016 Jy ! Component: 100 - total flux cleaned = 0.420778 Jy ! Total flux subtracted in 100 components = 0.420778 Jy ! Clean residual min=-0.073690 max=0.095581 Jy/beam ! Clean residual mean=0.000172 rms=0.015980 Jy/beam ! Combined flux in latest and established models = 1.74532 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 1.74532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.413677Jy sigma=5.120842 ! Fit after self-cal, rms=0.401222Jy sigma=4.812423 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138371 Jy ! Component: 100 - total flux cleaned = 0.234595 Jy ! Total flux subtracted in 100 components = 0.234595 Jy ! Clean residual min=-0.045476 max=0.063640 Jy/beam ! Clean residual mean=0.000122 rms=0.010329 Jy/beam ! Combined flux in latest and established models = 1.97992 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 1.97992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.281677Jy sigma=3.403123 ! Fit after self-cal, rms=0.278834Jy sigma=3.301901 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.08059 Jy ! Component: 100 - total flux cleaned = 0.137826 Jy ! Total flux subtracted in 100 components = 0.137826 Jy ! Clean residual min=-0.033085 max=0.067329 Jy/beam ! Clean residual mean=0.000092 rms=0.007705 Jy/beam ! Combined flux in latest and established models = 2.11774 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 51 components and 2.11774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.218128Jy sigma=2.623006 ! Fit after self-cal, rms=0.217769Jy sigma=2.582511 ! Inverting map ! Added new window around map position (3, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0648269 Jy ! Component: 100 - total flux cleaned = 0.109546 Jy ! Total flux subtracted in 100 components = 0.109546 Jy ! Clean residual min=-0.024940 max=0.026794 Jy/beam ! Clean residual mean=0.000069 rms=0.005501 Jy/beam ! Combined flux in latest and established models = 2.22729 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 2.22729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.172534Jy sigma=2.092339 ! Fit after self-cal, rms=0.170560Jy sigma=2.062129 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9337 mas, bmaj=2.194 mas, bpa=7.675 degrees ! Estimated noise=0.692454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0622578 Jy ! Component: 100 - total flux cleaned = 0.106023 Jy ! Component: 150 - total flux cleaned = 0.138951 Jy ! Component: 200 - total flux cleaned = 0.164324 Jy ! Total flux subtracted in 200 components = 0.164324 Jy ! Clean residual min=-0.019009 max=0.021831 Jy/beam ! Clean residual mean=0.000069 rms=0.004541 Jy/beam ! Combined flux in latest and established models = 2.39161 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 87 components and 2.39161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.123721Jy sigma=1.602957 ! Fit after self-cal, rms=0.121768Jy sigma=1.567396 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9337 x 2.194 at 7.675 degrees (North through East) ! Clean map min=-0.016407 max=1.397 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.03 KP 0.97 ! LA 0.96 MK 0.98 NL 1.02 OV 0.96 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.04 KP 0.98 ! LA 0.99 MK 1.02 NL 1.04 OV 0.99 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.05 KP 1.01 ! LA 1.01 MK 1.00 NL 1.06 OV 0.99 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.00 KP 0.98 ! LA 0.96 MK 0.99 NL 1.01 OV 0.97 ! PT 0.96 SC 1.00 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.01 KP 0.99 ! LA 0.97 MK 1.01 NL 1.04 OV 0.97 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.03 KP 1.01 ! LA 1.00 MK 1.02 NL 1.04 OV 1.00 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.00 KP 0.99 ! LA 0.97 MK 1.00 NL 1.02 OV 0.95 ! PT 0.96 SC 1.00 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.121768Jy sigma=1.567396 ! Fit after self-cal, rms=0.095129Jy sigma=1.239115 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9379 mas, bmaj=2.207 mas, bpa=7.645 degrees ! Estimated noise=0.6897 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179714 Jy ! Component: 100 - total flux cleaned = 0.0287419 Jy ! Component: 150 - total flux cleaned = 0.0357741 Jy ! Component: 200 - total flux cleaned = 0.0383119 Jy ! Total flux subtracted in 200 components = 0.0383119 Jy ! Clean residual min=-0.010599 max=0.009970 Jy/beam ! Clean residual mean=-0.000004 rms=0.002624 Jy/beam ! Combined flux in latest and established models = 2.42992 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 115 components and 2.42992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.089863Jy sigma=1.188402 ! Fit after self-cal, rms=0.089100Jy sigma=1.178591 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.089100Jy sigma=1.178591 ! Fit after self-cal, rms=0.086454Jy sigma=1.149202 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9368 mas, bmaj=2.206 mas, bpa=7.605 degrees ! Estimated noise=0.690173 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0074139 Jy ! Component: 100 - total flux cleaned = 0.010149 Jy ! Component: 150 - total flux cleaned = 0.0110787 Jy ! Component: 200 - total flux cleaned = 0.0118811 Jy ! Total flux subtracted in 200 components = 0.0118811 Jy ! Clean residual min=-0.009999 max=0.009018 Jy/beam ! Clean residual mean=-0.000001 rms=0.002105 Jy/beam ! Combined flux in latest and established models = 2.44181 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 134 components and 2.44181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.085184Jy sigma=1.137030 ! Fit after self-cal, rms=0.085153Jy sigma=1.134585 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011718 Jy ! Component: 100 - total flux cleaned = 0.00264492 Jy ! Component: 150 - total flux cleaned = 0.00292412 Jy ! Component: 200 - total flux cleaned = 0.00305146 Jy ! Total flux subtracted in 200 components = 0.00305146 Jy ! Clean residual min=-0.009640 max=0.008574 Jy/beam ! Clean residual mean=-0.000002 rms=0.002039 Jy/beam ! Combined flux in latest and established models = 2.44486 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 145 components and 2.44486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.084467Jy sigma=1.128339 ! Fit after self-cal, rms=0.084478Jy sigma=1.126725 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.084478Jy sigma=1.126725 ! Fit after self-cal, rms=0.083936Jy sigma=1.118282 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9371 mas, bmaj=2.206 mas, bpa=7.595 degrees ! Estimated noise=0.690475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273732 Jy ! Component: 100 - total flux cleaned = 0.00420862 Jy ! Component: 150 - total flux cleaned = 0.00529987 Jy ! Component: 200 - total flux cleaned = 0.00540274 Jy ! Total flux subtracted in 200 components = 0.00540274 Jy ! Clean residual min=-0.008754 max=0.008417 Jy/beam ! Clean residual mean=-0.000002 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 2.45026 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 151 components and 2.45026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.083368Jy sigma=1.113158 ! Fit after self-cal, rms=0.083380Jy sigma=1.111698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110431 Jy ! Component: 100 - total flux cleaned = 0.000951998 Jy ! Component: 150 - total flux cleaned = 0.00126391 Jy ! Component: 200 - total flux cleaned = 0.00107666 Jy ! Total flux subtracted in 200 components = 0.00107666 Jy ! Clean residual min=-0.008345 max=0.008201 Jy/beam ! Clean residual mean=-0.000003 rms=0.001878 Jy/beam ! Combined flux in latest and established models = 2.45134 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 157 components and 2.45134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.082969Jy sigma=1.108139 ! Fit after self-cal, rms=0.082991Jy sigma=1.107030 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.082991Jy sigma=1.107030 ! Fit after self-cal, rms=0.082830Jy sigma=1.104089 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.991 mas, bmaj=3.522 mas, bpa=5.99 degrees ! Estimated noise=0.936395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000484894 Jy ! Component: 100 - total flux cleaned = -0.000431916 Jy ! Component: 150 - total flux cleaned = -0.000840907 Jy ! Component: 200 - total flux cleaned = -0.00141124 Jy ! Total flux subtracted in 200 components = -0.00141124 Jy ! Clean residual min=-0.010059 max=0.011726 Jy/beam ! Clean residual mean=-0.000004 rms=0.003031 Jy/beam ! Combined flux in latest and established models = 2.44993 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 168 components and 2.44993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.082404Jy sigma=1.102116 ! Fit after self-cal, rms=0.082359Jy sigma=1.100159 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000330412 Jy ! Component: 100 - total flux cleaned = 0.000188503 Jy ! Component: 150 - total flux cleaned = -0.000209206 Jy ! Component: 200 - total flux cleaned = -0.000662917 Jy ! Total flux subtracted in 200 components = -0.000662917 Jy ! Clean residual min=-0.009781 max=0.011632 Jy/beam ! Clean residual mean=-0.000005 rms=0.002970 Jy/beam ! Combined flux in latest and established models = 2.44926 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 175 components and 2.44926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.082104Jy sigma=1.099643 ! Fit after self-cal, rms=0.082087Jy sigma=1.097860 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9374 mas, bmaj=2.207 mas, bpa=7.595 degrees ! Estimated noise=0.69053 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9374 x 2.207 at 7.595 degrees (North through East) ! Clean map min=-0.0064955 max=1.3829 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.082087Jy sigma=1.097860 ! Fit after self-cal, rms=0.067947Jy sigma=0.868189 ! Inverting map and beam ! Estimated beam: bmin=0.9376 mas, bmaj=2.207 mas, bpa=7.549 degrees ! Estimated noise=0.68947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116698 Jy ! Component: 100 - total flux cleaned = 0.000334771 Jy ! Component: 150 - total flux cleaned = 0.000431532 Jy ! Component: 200 - total flux cleaned = 0.000264 Jy ! Total flux subtracted in 200 components = 0.000264 Jy ! Clean residual min=-0.006805 max=0.008491 Jy/beam ! Clean residual mean=-0.000009 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 2.44953 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 187 components and 2.44953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.067583Jy sigma=0.863592 ! Fit after self-cal, rms=0.067620Jy sigma=0.862835 ! Inverting map ! Added new window around map position (4, 11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00693265 Jy ! Component: 100 - total flux cleaned = 0.00974835 Jy ! Component: 150 - total flux cleaned = 0.0116857 Jy ! Component: 200 - total flux cleaned = 0.0129155 Jy ! Total flux subtracted in 200 components = 0.0129155 Jy ! Clean residual min=-0.006472 max=0.005998 Jy/beam ! Clean residual mean=-0.000010 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 2.46244 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 219 components and 2.46244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.066770Jy sigma=0.851747 ! Fit after self-cal, rms=0.066648Jy sigma=0.850717 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.066648Jy sigma=0.850717 ! Fit after self-cal, rms=0.066433Jy sigma=0.848935 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7478 mas, bmaj=1.867 mas, bpa=6.656 degrees ! Estimated noise=0.942175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03516 Jy ! Component: 100 - total flux cleaned = 1.40625 Jy ! Component: 150 - total flux cleaned = 1.63769 Jy ! Component: 200 - total flux cleaned = 1.79836 Jy ! Total flux subtracted in 200 components = 1.79836 Jy ! Clean residual min=-0.042922 max=0.090100 Jy/beam ! Clean residual mean=0.000134 rms=0.012263 Jy/beam ! Combined flux in latest and established models = 1.79836 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.79836 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9382 mas, bmaj=2.209 mas, bpa=7.54 degrees ! Estimated noise=0.6893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.179886 Jy ! Component: 100 - total flux cleaned = 0.29687 Jy ! Component: 150 - total flux cleaned = 0.378234 Jy ! Component: 200 - total flux cleaned = 0.436019 Jy ! Total flux subtracted in 200 components = 0.436019 Jy ! Clean residual min=-0.019828 max=0.033226 Jy/beam ! Clean residual mean=0.000092 rms=0.005716 Jy/beam ! Combined flux in latest and established models = 2.23437 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 2.23437 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0432273 Jy ! Component: 100 - total flux cleaned = 0.0761058 Jy ! Component: 150 - total flux cleaned = 0.101689 Jy ! Component: 200 - total flux cleaned = 0.122029 Jy ! Total flux subtracted in 200 components = 0.122029 Jy ! Clean residual min=-0.012473 max=0.012474 Jy/beam ! Clean residual mean=0.000032 rms=0.002765 Jy/beam ! Combined flux in latest and established models = 2.3564 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 76 components and 2.3564 Jy ! Inverting map ! Added new window around map position (1.6, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164529 Jy ! Component: 100 - total flux cleaned = 0.0298297 Jy ! Component: 150 - total flux cleaned = 0.0407802 Jy ! Component: 200 - total flux cleaned = 0.0499813 Jy ! Total flux subtracted in 200 components = 0.0499813 Jy ! Clean residual min=-0.009454 max=0.007742 Jy/beam ! Clean residual mean=0.000011 rms=0.001923 Jy/beam ! Combined flux in latest and established models = 2.40638 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 105 components and 2.40638 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.991 mas, bmaj=3.525 mas, bpa=5.936 degrees ! Estimated noise=0.933723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132172 Jy ! Component: 100 - total flux cleaned = 0.0224424 Jy ! Component: 150 - total flux cleaned = 0.0296648 Jy ! Component: 200 - total flux cleaned = 0.0343452 Jy ! Total flux subtracted in 200 components = 0.0343452 Jy ! Clean residual min=-0.008410 max=0.010752 Jy/beam ! Clean residual mean=-0.000005 rms=0.002569 Jy/beam ! Combined flux in latest and established models = 2.44073 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352746 Jy ! Component: 100 - total flux cleaned = 0.00672407 Jy ! Component: 150 - total flux cleaned = 0.00949012 Jy ! Component: 200 - total flux cleaned = 0.0119067 Jy ! Total flux subtracted in 200 components = 0.0119067 Jy ! Clean residual min=-0.007699 max=0.010372 Jy/beam ! Clean residual mean=-0.000012 rms=0.002432 Jy/beam ! Combined flux in latest and established models = 2.45264 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 159 components and 2.45264 Jy ! Inverting map ! Added new window around map position (43.2, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00933832 Jy ! Component: 100 - total flux cleaned = 0.0150334 Jy ! Component: 150 - total flux cleaned = 0.0176954 Jy ! Component: 200 - total flux cleaned = 0.0200716 Jy ! Total flux subtracted in 200 components = 0.0200716 Jy ! Clean residual min=-0.007014 max=0.007039 Jy/beam ! Clean residual mean=-0.000007 rms=0.001977 Jy/beam ! Combined flux in latest and established models = 2.47271 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 192 components and 2.47271 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9382 mas, bmaj=2.209 mas, bpa=7.54 degrees ! Estimated noise=0.6893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210561 Jy ! Component: 100 - total flux cleaned = 0.00347292 Jy ! Component: 150 - total flux cleaned = 0.00383021 Jy ! Component: 200 - total flux cleaned = 0.00460415 Jy ! Total flux subtracted in 200 components = 0.00460415 Jy ! Clean residual min=-0.005463 max=0.005617 Jy/beam ! Clean residual mean=-0.000004 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 2.47731 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 212 components and 2.47731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.064881Jy sigma=0.836795 ! Fit after self-cal, rms=0.064676Jy sigma=0.831425 wmodel /scr/pima/bg219b_uvs/J2225-0457_X_map.mod ! Writing 212 model components to file: /scr/pima/bg219b_uvs/J2225-0457_X_map.mod wobs /scr/pima/bg219b_uvs/J2225-0457_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219b_uvs/J2225-0457_X_uvs.fits wwins /scr/pima/bg219b_uvs/J2225-0457_X_map.win ! wwins: Wrote 7 windows to /scr/pima/bg219b_uvs/J2225-0457_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237141 Jy ! Component: 100 - total flux cleaned = -0.000257395 Jy ! Component: 150 - total flux cleaned = -0.000414846 Jy ! Component: 200 - total flux cleaned = -0.000566598 Jy ! Component: 250 - total flux cleaned = -0.000424247 Jy ! Component: 300 - total flux cleaned = -0.000145532 Jy ! Component: 350 - total flux cleaned = 0.000190587 Jy ! Component: 400 - total flux cleaned = 0.000515761 Jy ! Component: 450 - total flux cleaned = 0.000705361 Jy ! Component: 500 - total flux cleaned = 0.000952884 Jy ! Component: 550 - total flux cleaned = 0.00125377 Jy ! Component: 600 - total flux cleaned = 0.00148812 Jy ! Component: 650 - total flux cleaned = 0.00177486 Jy ! Component: 700 - total flux cleaned = 0.0020001 Jy ! Component: 750 - total flux cleaned = 0.00205456 Jy ! Component: 800 - total flux cleaned = 0.00221625 Jy ! Component: 850 - total flux cleaned = 0.00211072 Jy ! Component: 900 - total flux cleaned = 0.00221611 Jy ! Component: 950 - total flux cleaned = 0.00231725 Jy ! Component: 1000 - total flux cleaned = 0.00236693 Jy ! Component: 1050 - total flux cleaned = 0.00231752 Jy ! Component: 1100 - total flux cleaned = 0.0023663 Jy ! Component: 1150 - total flux cleaned = 0.00236752 Jy ! Component: 1200 - total flux cleaned = 0.00255368 Jy ! Component: 1250 - total flux cleaned = 0.00259928 Jy ! Component: 1300 - total flux cleaned = 0.0026445 Jy ! Component: 1350 - total flux cleaned = 0.00286531 Jy ! Component: 1400 - total flux cleaned = 0.00299641 Jy ! Component: 1450 - total flux cleaned = 0.00308139 Jy ! Component: 1500 - total flux cleaned = 0.00312355 Jy ! Component: 1550 - total flux cleaned = 0.00324938 Jy ! Component: 1600 - total flux cleaned = 0.00349592 Jy ! Component: 1650 - total flux cleaned = 0.00361792 Jy ! Component: 1700 - total flux cleaned = 0.00361808 Jy ! Component: 1750 - total flux cleaned = 0.00373705 Jy ! Component: 1800 - total flux cleaned = 0.0039309 Jy ! Component: 1850 - total flux cleaned = 0.00408336 Jy ! Component: 1900 - total flux cleaned = 0.00400727 Jy ! Component: 1950 - total flux cleaned = 0.00408138 Jy ! Component: 2000 - total flux cleaned = 0.0041187 Jy ! Component: 2050 - total flux cleaned = 0.00415545 Jy ! Component: 2100 - total flux cleaned = 0.00404831 Jy ! Component: 2150 - total flux cleaned = 0.00426129 Jy ! Component: 2200 - total flux cleaned = 0.00419122 Jy ! Component: 2250 - total flux cleaned = 0.00419171 Jy ! Component: 2300 - total flux cleaned = 0.00419206 Jy ! Component: 2350 - total flux cleaned = 0.00422582 Jy ! Component: 2400 - total flux cleaned = 0.00435933 Jy ! Component: 2450 - total flux cleaned = 0.00442456 Jy ! Component: 2500 - total flux cleaned = 0.00455402 Jy ! Component: 2550 - total flux cleaned = 0.00442526 Jy ! Component: 2600 - total flux cleaned = 0.0044889 Jy ! Component: 2650 - total flux cleaned = 0.00458372 Jy ! Component: 2700 - total flux cleaned = 0.00455243 Jy ! Component: 2750 - total flux cleaned = 0.0047064 Jy ! Component: 2800 - total flux cleaned = 0.00476743 Jy ! Component: 2850 - total flux cleaned = 0.00485789 Jy ! Component: 2900 - total flux cleaned = 0.0048279 Jy ! Component: 2950 - total flux cleaned = 0.00494576 Jy ! Component: 3000 - total flux cleaned = 0.00497512 Jy ! Component: 3050 - total flux cleaned = 0.00509101 Jy ! Component: 3100 - total flux cleaned = 0.00523374 Jy ! Component: 3150 - total flux cleaned = 0.00531819 Jy ! Component: 3200 - total flux cleaned = 0.00548544 Jy ! Component: 3250 - total flux cleaned = 0.00565094 Jy ! Component: 3300 - total flux cleaned = 0.0056234 Jy ! Component: 3350 - total flux cleaned = 0.0057315 Jy ! Component: 3400 - total flux cleaned = 0.005812 Jy ! Component: 3450 - total flux cleaned = 0.0059183 Jy ! Component: 3500 - total flux cleaned = 0.0060753 Jy ! Component: 3550 - total flux cleaned = 0.00617917 Jy ! Component: 3600 - total flux cleaned = 0.00633336 Jy ! Component: 3650 - total flux cleaned = 0.00638444 Jy ! Component: 3700 - total flux cleaned = 0.00643533 Jy ! Component: 3750 - total flux cleaned = 0.00658548 Jy ! Component: 3800 - total flux cleaned = 0.00670944 Jy ! Component: 3850 - total flux cleaned = 0.00692999 Jy ! Component: 3900 - total flux cleaned = 0.00702701 Jy ! Component: 3950 - total flux cleaned = 0.00714745 Jy ! Component: 4000 - total flux cleaned = 0.00729013 Jy ! Component: 4050 - total flux cleaned = 0.00731359 Jy ! Total flux subtracted in 4096 components = 0.00736069 Jy ! Clean residual min=-0.001166 max=0.001379 Jy/beam ! Clean residual mean=-0.000000 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 2.48467 Jy keep ! Adding 365 model components to the UV plane model. ! The established model now contains 576 components and 2.48467 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219b_uvs/J2225-0457_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9382 x 2.209 at 7.54 degrees (North through East) ! Clean map min=-0.0036106 max=1.3868 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2225-0457_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.3868 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000429561 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0929251 0.0929251 0.18585 0.3717 0.743401 1.4868 2.9736 5.94721 11.8944 23.7888 47.5776 95.1553 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.386 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3228.41 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J2225-0457_X_uvs.log closed on Thu Apr 7 02:05:34 2016