! Started logfile: /scr/pima/bg219b_uvs/J2204-0616_S_dfm.log on Thu May 19 20:36:17 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219b_uvs/J2204-0616_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J2204-0616_S_uva.fits ! AN table 1: 64 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.826389 visibilities/baseline/integration-bin. ! Found source: J2204-0616 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 9520 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2204-0616_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000462Jy sigma=21.346125 ! Fit after self-cal, rms=0.954194Jy sigma=20.384690 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.798 mas, bmaj=6.879 mas, bpa=-6.205 degrees ! Estimated noise=0.586047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363879 Jy ! Component: 100 - total flux cleaned = 0.0445627 Jy ! Total flux subtracted in 100 components = 0.0445627 Jy ! Clean residual min=-0.003309 max=0.003659 Jy/beam ! Clean residual mean=0.000001 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.0445627 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0445627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068724Jy sigma=1.350064 ! Fit after self-cal, rms=0.067333Jy sigma=1.320796 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=7.944 mas, bpa=-5.084 degrees ! Estimated noise=0.364276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533247 Jy ! Component: 100 - total flux cleaned = 0.00754403 Jy ! Component: 150 - total flux cleaned = 0.00828643 Jy ! Component: 200 - total flux cleaned = 0.00846682 Jy ! Total flux subtracted in 200 components = 0.00846682 Jy ! Clean residual min=-0.001979 max=0.001959 Jy/beam ! Clean residual mean=0.000001 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0530295 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.0530295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066945Jy sigma=1.312661 ! Fit after self-cal, rms=0.066939Jy sigma=1.312144 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.513 x 7.944 at -5.084 degrees (North through East) ! Clean map min=-0.001779 max=0.050029 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.92 HN 0.96 KP 1.05 ! LA 0.93 MK 1.05 NL 1.01 OV 1.10 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.95 KP 0.99 ! LA 0.97 MK 0.97 NL 1.00 OV 1.17 ! PT 1.09 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.92 HN 0.97 KP 1.11 ! LA 0.98 MK 0.99 NL 0.99 OV 1.03 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.92 HN 0.91 KP 1.03 ! LA 1.00 MK 1.09 NL 0.92 OV 1.04 ! PT 0.94 SC 0.94 ! ! ! Fit before self-cal, rms=0.066939Jy sigma=1.312144 ! Fit after self-cal, rms=0.065502Jy sigma=1.308643 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=7.915 mas, bpa=-4.887 degrees ! Estimated noise=0.360448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014568 Jy ! Component: 100 - total flux cleaned = 0.000240963 Jy ! Component: 150 - total flux cleaned = 0.000281249 Jy ! Component: 200 - total flux cleaned = 0.000281554 Jy ! Total flux subtracted in 200 components = 0.000281554 Jy ! Clean residual min=-0.001723 max=0.002008 Jy/beam ! Clean residual mean=0.000000 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.053311 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 26 components and 0.053311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065484Jy sigma=1.308338 ! Fit after self-cal, rms=0.065516Jy sigma=1.307411 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065516Jy sigma=1.307411 ! Fit after self-cal, rms=0.065570Jy sigma=1.305344 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.519 mas, bmaj=7.893 mas, bpa=-4.826 degrees ! Estimated noise=0.360015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.69131e-05 Jy ! Component: 100 - total flux cleaned = 4.39784e-05 Jy ! Component: 150 - total flux cleaned = 3.0551e-05 Jy ! Component: 200 - total flux cleaned = 4.25317e-05 Jy ! Total flux subtracted in 200 components = 4.25317e-05 Jy ! Clean residual min=-0.001617 max=0.001879 Jy/beam ! Clean residual mean=-0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0533536 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.0533536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065561Jy sigma=1.305194 ! Fit after self-cal, rms=0.065601Jy sigma=1.304863 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-83, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000893024 Jy ! Component: 100 - total flux cleaned = 0.00119436 Jy ! Component: 150 - total flux cleaned = 0.00126082 Jy ! Component: 200 - total flux cleaned = 0.00137589 Jy ! Total flux subtracted in 200 components = 0.00137589 Jy ! Clean residual min=-0.001585 max=0.001506 Jy/beam ! Clean residual mean=-0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0547295 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.0547295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065542Jy sigma=1.303728 ! Fit after self-cal, rms=0.065505Jy sigma=1.302902 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065505Jy sigma=1.302902 ! Fit after self-cal, rms=0.065303Jy sigma=1.302774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=7.888 mas, bpa=-4.833 degrees ! Estimated noise=0.358516 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314829 Jy ! Component: 100 - total flux cleaned = 0.000308846 Jy ! Component: 150 - total flux cleaned = 0.000388845 Jy ! Component: 200 - total flux cleaned = 0.00046239 Jy ! Total flux subtracted in 200 components = 0.00046239 Jy ! Clean residual min=-0.001506 max=0.001529 Jy/beam ! Clean residual mean=-0.000001 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.0551919 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 58 components and 0.0551918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065275Jy sigma=1.302224 ! Fit after self-cal, rms=0.065282Jy sigma=1.302141 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.98434e-05 Jy ! Component: 100 - total flux cleaned = 0.000148949 Jy ! Component: 150 - total flux cleaned = 0.000171418 Jy ! Component: 200 - total flux cleaned = 0.000191733 Jy ! Total flux subtracted in 200 components = 0.000191733 Jy ! Clean residual min=-0.001505 max=0.001536 Jy/beam ! Clean residual mean=-0.000000 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0553836 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.0553836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065266Jy sigma=1.301852 ! Fit after self-cal, rms=0.065266Jy sigma=1.301829 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065266Jy sigma=1.301829 ! Fit after self-cal, rms=0.065247Jy sigma=1.301769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.662 mas, bmaj=13.13 mas, bpa=-1.521 degrees ! Estimated noise=0.44682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418628 Jy ! Component: 100 - total flux cleaned = 0.000349369 Jy ! Component: 150 - total flux cleaned = 0.00031958 Jy ! Component: 200 - total flux cleaned = 0.000305628 Jy ! Total flux subtracted in 200 components = 0.000305628 Jy ! Clean residual min=-0.001625 max=0.001428 Jy/beam ! Clean residual mean=-0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0556892 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.0556892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065241Jy sigma=1.301704 ! Fit after self-cal, rms=0.065241Jy sigma=1.301662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124868 Jy ! Component: 100 - total flux cleaned = 9.7488e-05 Jy ! Component: 150 - total flux cleaned = 8.57045e-05 Jy ! Component: 200 - total flux cleaned = 8.58064e-05 Jy ! Total flux subtracted in 200 components = 8.58064e-05 Jy ! Clean residual min=-0.001622 max=0.001420 Jy/beam ! Clean residual mean=-0.000001 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.055775 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.055775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065239Jy sigma=1.301639 ! Fit after self-cal, rms=0.065237Jy sigma=1.301624 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=7.884 mas, bpa=-4.822 degrees ! Estimated noise=0.358444 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.517 x 7.884 at -4.822 degrees (North through East) ! Clean map min=-0.0016733 max=0.049141 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=6.814 mas, bpa=-5.846 degrees ! Estimated noise=0.575252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0367979 Jy ! Component: 100 - total flux cleaned = 0.0442336 Jy ! Component: 150 - total flux cleaned = 0.0460671 Jy ! Component: 200 - total flux cleaned = 0.0463204 Jy ! Total flux subtracted in 200 components = 0.0463204 Jy ! Clean residual min=-0.003326 max=0.003442 Jy/beam ! Clean residual mean=0.000004 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.0463204 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0463204 Jy ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=7.884 mas, bpa=-4.822 degrees ! Estimated noise=0.358444 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354927 Jy ! Component: 100 - total flux cleaned = 0.00564133 Jy ! Component: 150 - total flux cleaned = 0.00645657 Jy ! Component: 200 - total flux cleaned = 0.0072314 Jy ! Total flux subtracted in 200 components = 0.0072314 Jy ! Clean residual min=-0.001732 max=0.001523 Jy/beam ! Clean residual mean=-0.000001 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.0535518 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 44 components and 0.0535518 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.662 mas, bmaj=13.13 mas, bpa=-1.521 degrees ! Estimated noise=0.44682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136299 Jy ! Component: 100 - total flux cleaned = 0.00217066 Jy ! Component: 150 - total flux cleaned = 0.00238838 Jy ! Component: 200 - total flux cleaned = 0.00248932 Jy ! Total flux subtracted in 200 components = 0.00248932 Jy ! Clean residual min=-0.001743 max=0.001462 Jy/beam ! Clean residual mean=-0.000001 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0560411 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.79153e-05 Jy ! Component: 100 - total flux cleaned = 1.7342e-05 Jy ! Component: 150 - total flux cleaned = 1.7477e-05 Jy ! Component: 200 - total flux cleaned = 1.73301e-05 Jy ! Total flux subtracted in 200 components = 1.73301e-05 Jy ! Clean residual min=-0.001715 max=0.001447 Jy/beam ! Clean residual mean=-0.000001 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0560585 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 80 components and 0.0560585 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=7.884 mas, bpa=-4.822 degrees ! Estimated noise=0.358444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000220647 Jy ! Component: 100 - total flux cleaned = -0.000302995 Jy ! Component: 150 - total flux cleaned = -0.000327414 Jy ! Component: 200 - total flux cleaned = -0.000327698 Jy ! Total flux subtracted in 200 components = -0.000327698 Jy ! Clean residual min=-0.001548 max=0.001530 Jy/beam ! Clean residual mean=-0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0557308 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 93 components and 0.0557308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065239Jy sigma=1.301662 ! Fit after self-cal, rms=0.065239Jy sigma=1.301561 wmodel /J2204-0616_S_map.mod ! wmodel: Unable to open new model file: /J2204-0616_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219b_uvs/J2204-0616_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.517 x 7.884 at -4.822 degrees (North through East) ! Clean map min=-0.0018611 max=0.048884 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2204-0616_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0488835 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000384969 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.36257 2.36257 4.72513 9.45026 18.9005 37.801 75.6021 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.048 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 126.98 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J2204-0616_S_dfm.log closed on Thu May 19 20:36:19 2016