! Started logfile: /scr/pima/bg219b_uvs/J2156-0333_X_uvs.log on Thu Apr  7 02:04:52 2016
obs /scr/pima/bg219b_uvs/J2156-0333_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J2156-0333_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.904189 visibilities/baseline/integration-bin.
! Found source: J2156-0333
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29784 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J2156-0333_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.003146Jy  sigma=25.126573
! Fit after  self-cal, rms=0.929727Jy  sigma=23.224440
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7426 mas, bmaj=1.777 mas, bpa=-3.258 degrees
! Estimated noise=0.432151 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0515354 Jy
! Component: 100  -  total flux cleaned = 0.0677655 Jy
! Total flux subtracted in 100 components = 0.0677655 Jy
! Clean residual min=-0.004009 max=0.007819 Jy/beam
! Clean residual mean=0.000023 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 0.0677655 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0677655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060313Jy  sigma=1.453137
! Fit after  self-cal, rms=0.059783Jy  sigma=1.440284
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00917263 Jy
! Component: 100  -  total flux cleaned = 0.0142154 Jy
! Total flux subtracted in 100 components = 0.0142154 Jy
! Clean residual min=-0.003229 max=0.006478 Jy/beam
! Clean residual mean=0.000016 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 0.0819809 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.0819809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057785Jy  sigma=1.384450
! Fit after  self-cal, rms=0.057764Jy  sigma=1.383804
! Inverting map 
! Added new window around map position (-2.2, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0059993 Jy
! Component: 100  -  total flux cleaned = 0.00982712 Jy
! Total flux subtracted in 100 components = 0.00982712 Jy
! Clean residual min=-0.002899 max=0.004682 Jy/beam
! Clean residual mean=0.000013 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 0.0918081 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 28 components and 0.0918081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056754Jy  sigma=1.354331
! Fit after  self-cal, rms=0.056693Jy  sigma=1.352849
! Inverting map 
! Added new window around map position (-3.6, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00465923 Jy
! Component: 100  -  total flux cleaned = 0.00775864 Jy
! Total flux subtracted in 100 components = 0.00775864 Jy
! Clean residual min=-0.002602 max=0.003538 Jy/beam
! Clean residual mean=0.000010 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.0995667 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 44 components and 0.0995667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056162Jy  sigma=1.338066
! Fit after  self-cal, rms=0.056124Jy  sigma=1.337143
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9106 mas, bmaj=2.06 mas, bpa=-4.251 degrees
! Estimated noise=0.230081 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00535241 Jy
! Component: 100  -  total flux cleaned = 0.00873165 Jy
! Component: 150  -  total flux cleaned = 0.0112632 Jy
! Component: 200  -  total flux cleaned = 0.013217 Jy
! Total flux subtracted in 200 components = 0.013217 Jy
! Clean residual min=-0.001830 max=0.001869 Jy/beam
! Clean residual mean=0.000007 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.112784 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 79 components and 0.112784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055533Jy  sigma=1.320883
! Fit after  self-cal, rms=0.055491Jy  sigma=1.319637
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9106 x 2.06 at -4.251 degrees (North through East)
! Clean map  min=-0.001548  max=0.070589 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.99     KP        0.98     
!   LA        0.97     MK        1.02     NL        1.04     OV        1.00     
!   PT        0.92     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        0.98     
!   LA        0.99     MK        1.00     NL        1.03     OV        1.04     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.10     KP        0.99     
!   LA        0.98     MK        0.99     NL        1.04     OV        1.01     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.06     KP        0.98     
!   LA        0.93     MK        0.98     NL        1.06     OV        1.01     
!   PT        0.94     SC        1.06     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.03     KP        0.97     
!   LA        0.99     MK        1.01     NL        1.00     OV        1.01     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        0.93     KP        0.99     
!   LA        0.99     MK        1.05     NL        1.00     OV        1.03     
!   PT        0.95     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.95     HN        1.01     KP        0.96     
!   LA        0.94     MK        0.99     NL        1.05     OV        1.00     
!   PT        0.96     SC        0.92     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055491Jy  sigma=1.319637
! Fit after  self-cal, rms=0.055198Jy  sigma=1.315284
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9162 mas, bmaj=2.073 mas, bpa=-4.214 degrees
! Estimated noise=0.228115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119227 Jy
! Component: 100  -  total flux cleaned = 0.00194905 Jy
! Component: 150  -  total flux cleaned = 0.00231829 Jy
! Component: 200  -  total flux cleaned = 0.00244886 Jy
! Total flux subtracted in 200 components = 0.00244886 Jy
! Clean residual min=-0.001314 max=0.001419 Jy/beam
! Clean residual mean=0.000003 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.115233 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 93 components and 0.115233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055168Jy  sigma=1.314428
! Fit after  self-cal, rms=0.055177Jy  sigma=1.314218
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055177Jy  sigma=1.314218
! Fit after  self-cal, rms=0.055070Jy  sigma=1.312056
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9139 mas, bmaj=2.07 mas, bpa=-4.211 degrees
! Estimated noise=0.227869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000710315 Jy
! Component: 100  -  total flux cleaned = 0.000989997 Jy
! Component: 150  -  total flux cleaned = 0.00111545 Jy
! Component: 200  -  total flux cleaned = 0.00120761 Jy
! Total flux subtracted in 200 components = 0.00120761 Jy
! Clean residual min=-0.001292 max=0.001352 Jy/beam
! Clean residual mean=0.000001 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.11644 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 100 components and 0.11644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055055Jy  sigma=1.311704
! Fit after  self-cal, rms=0.055058Jy  sigma=1.311602
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (50, 30).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116621 Jy
! Component: 100  -  total flux cleaned = 0.00172458 Jy
! Component: 150  -  total flux cleaned = 0.00205235 Jy
! Component: 200  -  total flux cleaned = 0.00225954 Jy
! Total flux subtracted in 200 components = 0.00225954 Jy
! Clean residual min=-0.001246 max=0.001140 Jy/beam
! Clean residual mean=0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.1187 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 112 components and 0.1187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055031Jy  sigma=1.310915
! Fit after  self-cal, rms=0.055028Jy  sigma=1.310856
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055028Jy  sigma=1.310856
! Fit after  self-cal, rms=0.054968Jy  sigma=1.310807
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9131 mas, bmaj=2.069 mas, bpa=-4.214 degrees
! Estimated noise=0.227635 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000507043 Jy
! Component: 100  -  total flux cleaned = 0.000757325 Jy
! Component: 150  -  total flux cleaned = 0.000902884 Jy
! Component: 200  -  total flux cleaned = 0.000955681 Jy
! Total flux subtracted in 200 components = 0.000955681 Jy
! Clean residual min=-0.001230 max=0.001122 Jy/beam
! Clean residual mean=0.000001 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.119655 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 117 components and 0.119655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054959Jy  sigma=1.310604
! Fit after  self-cal, rms=0.054959Jy  sigma=1.310590
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141863 Jy
! Component: 100  -  total flux cleaned = 0.000193263 Jy
! Component: 150  -  total flux cleaned = 0.000252587 Jy
! Component: 200  -  total flux cleaned = 0.000296608 Jy
! Total flux subtracted in 200 components = 0.000296608 Jy
! Clean residual min=-0.001205 max=0.001101 Jy/beam
! Clean residual mean=0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.119952 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 123 components and 0.119952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054954Jy  sigma=1.310473
! Fit after  self-cal, rms=0.054954Jy  sigma=1.310465
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054954Jy  sigma=1.310465
! Fit after  self-cal, rms=0.054950Jy  sigma=1.310447
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.167 mas, bmaj=3.504 mas, bpa=-1.668 degrees
! Estimated noise=0.285095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000629833 Jy
! Component: 100  -  total flux cleaned = 0.00104635 Jy
! Component: 150  -  total flux cleaned = 0.00133317 Jy
! Component: 200  -  total flux cleaned = 0.00146881 Jy
! Total flux subtracted in 200 components = 0.00146881 Jy
! Clean residual min=-0.001454 max=0.001409 Jy/beam
! Clean residual mean=0.000002 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.121421 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 136 components and 0.121421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054948Jy  sigma=1.310392
! Fit after  self-cal, rms=0.054947Jy  sigma=1.310365
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000100306 Jy
! Component: 100  -  total flux cleaned = 0.000180546 Jy
! Component: 150  -  total flux cleaned = 0.000203873 Jy
! Component: 200  -  total flux cleaned = 0.000239718 Jy
! Total flux subtracted in 200 components = 0.000239718 Jy
! Clean residual min=-0.001451 max=0.001392 Jy/beam
! Clean residual mean=0.000002 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.121661 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 145 components and 0.121661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054946Jy  sigma=1.310362
! Fit after  self-cal, rms=0.054947Jy  sigma=1.310354
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9128 mas, bmaj=2.068 mas, bpa=-4.208 degrees
! Estimated noise=0.227659 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9128 x 2.068 at -4.208 degrees (North through East)
! Clean map  min=-0.0011619  max=0.069601 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.744 mas, bmaj=1.779 mas, bpa=-3.041 degrees
! Estimated noise=0.427844 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0512432 Jy
! Component: 100  -  total flux cleaned = 0.0681458 Jy
! Component: 150  -  total flux cleaned = 0.0777781 Jy
! Component: 200  -  total flux cleaned = 0.0847647 Jy
! Total flux subtracted in 200 components = 0.0847647 Jy
! Clean residual min=-0.002886 max=0.004043 Jy/beam
! Clean residual mean=0.000015 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.0847647 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0847647 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9128 mas, bmaj=2.068 mas, bpa=-4.208 degrees
! Estimated noise=0.227659 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00882642 Jy
! Component: 100  -  total flux cleaned = 0.0146473 Jy
! Component: 150  -  total flux cleaned = 0.0188301 Jy
! Component: 200  -  total flux cleaned = 0.0219514 Jy
! Total flux subtracted in 200 components = 0.0219514 Jy
! Clean residual min=-0.001580 max=0.002294 Jy/beam
! Clean residual mean=0.000007 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.106716 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 68 components and 0.106716 Jy
! Inverting map 
! Added new window around map position (-9.2, 12.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025556 Jy
! Component: 100  -  total flux cleaned = 0.00445208 Jy
! Component: 150  -  total flux cleaned = 0.00601023 Jy
! Component: 200  -  total flux cleaned = 0.00732484 Jy
! Total flux subtracted in 200 components = 0.00732484 Jy
! Clean residual min=-0.001356 max=0.001205 Jy/beam
! Clean residual mean=0.000004 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.114041 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 110 components and 0.114041 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.167 mas, bmaj=3.504 mas, bpa=-1.668 degrees
! Estimated noise=0.285095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190042 Jy
! Component: 100  -  total flux cleaned = 0.00317504 Jy
! Component: 150  -  total flux cleaned = 0.00416546 Jy
! Component: 200  -  total flux cleaned = 0.0049627 Jy
! Total flux subtracted in 200 components = 0.0049627 Jy
! Clean residual min=-0.001429 max=0.001342 Jy/beam
! Clean residual mean=0.000004 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.119004 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000653426 Jy
! Component: 100  -  total flux cleaned = 0.00119131 Jy
! Component: 150  -  total flux cleaned = 0.00143147 Jy
! Component: 200  -  total flux cleaned = 0.00161408 Jy
! Total flux subtracted in 200 components = 0.00161408 Jy
! Clean residual min=-0.001480 max=0.001345 Jy/beam
! Clean residual mean=0.000003 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.120618 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 168 components and 0.120618 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9128 mas, bmaj=2.068 mas, bpa=-4.208 degrees
! Estimated noise=0.227659 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.08845e-05 Jy
! Component: 100  -  total flux cleaned = 7.26435e-05 Jy
! Component: 150  -  total flux cleaned = 7.2907e-05 Jy
! Component: 200  -  total flux cleaned = 0.000102614 Jy
! Total flux subtracted in 200 components = 0.000102614 Jy
! Clean residual min=-0.001225 max=0.001036 Jy/beam
! Clean residual mean=0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.12072 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 184 components and 0.12072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054934Jy  sigma=1.310112
! Fit after  self-cal, rms=0.054924Jy  sigma=1.309928
wmodel /scr/pima/bg219b_uvs/J2156-0333_X_map.mod
! Writing 184 model components to file: /scr/pima/bg219b_uvs/J2156-0333_X_map.mod
wobs /scr/pima/bg219b_uvs/J2156-0333_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J2156-0333_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J2156-0333_X_map.win
! wwins: Wrote 6 windows to /scr/pima/bg219b_uvs/J2156-0333_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000511578 Jy
! Component: 100  -  total flux cleaned = -0.000704665 Jy
! Component: 150  -  total flux cleaned = -0.000815422 Jy
! Component: 200  -  total flux cleaned = -0.000886372 Jy
! Component: 250  -  total flux cleaned = -0.000903379 Jy
! Component: 300  -  total flux cleaned = -0.000936842 Jy
! Component: 350  -  total flux cleaned = -0.000969192 Jy
! Component: 400  -  total flux cleaned = -0.000953514 Jy
! Component: 450  -  total flux cleaned = -0.00095342 Jy
! Component: 500  -  total flux cleaned = -0.000953394 Jy
! Component: 550  -  total flux cleaned = -0.000923702 Jy
! Component: 600  -  total flux cleaned = -0.000894392 Jy
! Component: 650  -  total flux cleaned = -0.000880065 Jy
! Component: 700  -  total flux cleaned = -0.000837802 Jy
! Component: 750  -  total flux cleaned = -0.000810517 Jy
! Component: 800  -  total flux cleaned = -0.000810396 Jy
! Component: 850  -  total flux cleaned = -0.000730171 Jy
! Component: 900  -  total flux cleaned = -0.000769907 Jy
! Component: 950  -  total flux cleaned = -0.000744089 Jy
! Component: 1000  -  total flux cleaned = -0.000731552 Jy
! Component: 1050  -  total flux cleaned = -0.000756997 Jy
! Component: 1100  -  total flux cleaned = -0.00076953 Jy
! Component: 1150  -  total flux cleaned = -0.00080642 Jy
! Component: 1200  -  total flux cleaned = -0.000818651 Jy
! Component: 1250  -  total flux cleaned = -0.00083054 Jy
! Component: 1300  -  total flux cleaned = -0.000818833 Jy
! Component: 1350  -  total flux cleaned = -0.000842292 Jy
! Component: 1400  -  total flux cleaned = -0.000865421 Jy
! Component: 1450  -  total flux cleaned = -0.00094498 Jy
! Component: 1500  -  total flux cleaned = -0.000955934 Jy
! Component: 1550  -  total flux cleaned = -0.000989318 Jy
! Component: 1600  -  total flux cleaned = -0.00103326 Jy
! Component: 1650  -  total flux cleaned = -0.00108745 Jy
! Component: 1700  -  total flux cleaned = -0.00109797 Jy
! Component: 1750  -  total flux cleaned = -0.00110855 Jy
! Component: 1800  -  total flux cleaned = -0.00112939 Jy
! Component: 1850  -  total flux cleaned = -0.00115005 Jy
! Component: 1900  -  total flux cleaned = -0.00117082 Jy
! Component: 1950  -  total flux cleaned = -0.00125235 Jy
! Component: 2000  -  total flux cleaned = -0.00128257 Jy
! Component: 2050  -  total flux cleaned = -0.00134253 Jy
! Component: 2100  -  total flux cleaned = -0.00140207 Jy
! Component: 2150  -  total flux cleaned = -0.00147098 Jy
! Component: 2200  -  total flux cleaned = -0.00153903 Jy
! Component: 2250  -  total flux cleaned = -0.00157765 Jy
! Component: 2300  -  total flux cleaned = -0.00162556 Jy
! Component: 2350  -  total flux cleaned = -0.00171104 Jy
! Component: 2400  -  total flux cleaned = -0.00173925 Jy
! Component: 2450  -  total flux cleaned = -0.00184171 Jy
! Component: 2500  -  total flux cleaned = -0.00191556 Jy
! Component: 2550  -  total flux cleaned = -0.0019431 Jy
! Component: 2600  -  total flux cleaned = -0.00201579 Jy
! Component: 2650  -  total flux cleaned = -0.00208785 Jy
! Component: 2700  -  total flux cleaned = -0.00215041 Jy
! Component: 2750  -  total flux cleaned = -0.00218586 Jy
! Component: 2800  -  total flux cleaned = -0.00229161 Jy
! Component: 2850  -  total flux cleaned = -0.0022829 Jy
! Component: 2900  -  total flux cleaned = -0.00240431 Jy
! Component: 2950  -  total flux cleaned = -0.00244733 Jy
! Component: 3000  -  total flux cleaned = -0.00245578 Jy
! Component: 3050  -  total flux cleaned = -0.00252353 Jy
! Component: 3100  -  total flux cleaned = -0.00257399 Jy
! Component: 3150  -  total flux cleaned = -0.00258228 Jy
! Component: 3200  -  total flux cleaned = -0.00260718 Jy
! Component: 3250  -  total flux cleaned = -0.00263185 Jy
! Component: 3300  -  total flux cleaned = -0.00264822 Jy
! Component: 3350  -  total flux cleaned = -0.00268074 Jy
! Component: 3400  -  total flux cleaned = -0.00271321 Jy
! Component: 3450  -  total flux cleaned = -0.00273736 Jy
! Component: 3500  -  total flux cleaned = -0.00276133 Jy
! Component: 3550  -  total flux cleaned = -0.00280888 Jy
! Component: 3600  -  total flux cleaned = -0.00284827 Jy
! Component: 3650  -  total flux cleaned = -0.00284824 Jy
! Component: 3700  -  total flux cleaned = -0.00290276 Jy
! Component: 3750  -  total flux cleaned = -0.00292585 Jy
! Component: 3800  -  total flux cleaned = -0.00294124 Jy
! Component: 3850  -  total flux cleaned = -0.00297932 Jy
! Component: 3900  -  total flux cleaned = -0.00298684 Jy
! Component: 3950  -  total flux cleaned = -0.00298681 Jy
! Component: 4000  -  total flux cleaned = -0.00298686 Jy
! Component: 4050  -  total flux cleaned = -0.00304651 Jy
! Total flux subtracted in 4096 components = -0.00304652 Jy
! Clean residual min=-0.000405 max=0.000407 Jy/beam
! Clean residual mean=0.000000 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.117674 Jy
keep
! Adding 281 model components to the UV plane model.
! The established model now contains 465 components and 0.117674 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J2156-0333_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9128 x 2.068 at -4.208 degrees (North through East)
! Clean map  min=-0.00086286  max=0.06947 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2156-0333_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0694698 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000123703 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.534202 0.534202 1.0684 2.13681 4.27361 8.54722 17.0944 34.1889 68.3778
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.069 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  561.585 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J2156-0333_X_uvs.log closed on Thu Apr  7 02:04:57 2016