! Started logfile: /scr/pima/bg219b_uvs/J2047+5343_X_dfm.log on Thu May 19 20:35:38 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J2047+5343_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J2047+5343_X_uva.fits
! AN table 1: 51 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.904139 visibilities/baseline/integration-bin.
! Found source: J2047+5343
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24900 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2047+5343_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.043493Jy  sigma=24.832162
! Fit after  self-cal, rms=0.750406Jy  sigma=17.825115
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8421 mas, bmaj=0.9136 mas, bpa=-17.39 degrees
! Estimated noise=0.436083 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.180022 Jy
! Component: 100  -  total flux cleaned = 0.230482 Jy
! Total flux subtracted in 100 components = 0.230482 Jy
! Clean residual min=-0.009601 max=0.023530 Jy/beam
! Clean residual mean=0.000037 rms=0.002327 Jy/beam
! Combined flux in latest and established models = 0.230482 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.230482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083039Jy  sigma=1.894315
! Fit after  self-cal, rms=0.083014Jy  sigma=1.893353
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0266189 Jy
! Component: 100  -  total flux cleaned = 0.0408764 Jy
! Total flux subtracted in 100 components = 0.0408764 Jy
! Clean residual min=-0.006634 max=0.013597 Jy/beam
! Clean residual mean=0.000022 rms=0.001520 Jy/beam
! Combined flux in latest and established models = 0.271358 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.271358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070075Jy  sigma=1.575792
! Fit after  self-cal, rms=0.070050Jy  sigma=1.574990
! Inverting map 
! Added new window around map position (-3, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122948 Jy
! Component: 100  -  total flux cleaned = 0.0194184 Jy
! Total flux subtracted in 100 components = 0.0194184 Jy
! Clean residual min=-0.005763 max=0.008464 Jy/beam
! Clean residual mean=0.000016 rms=0.001254 Jy/beam
! Combined flux in latest and established models = 0.290777 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 18 components and 0.290777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066663Jy  sigma=1.489657
! Fit after  self-cal, rms=0.066514Jy  sigma=1.486283
! Inverting map 
! Added new window around map position (-1.4, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00859759 Jy
! Component: 100  -  total flux cleaned = 0.0142779 Jy
! Total flux subtracted in 100 components = 0.0142779 Jy
! Clean residual min=-0.005064 max=0.005589 Jy/beam
! Clean residual mean=0.000011 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.305055 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 29 components and 0.305055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064497Jy  sigma=1.436029
! Fit after  self-cal, rms=0.064394Jy  sigma=1.433516
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.13 mas, bmaj=1.205 mas, bpa=-12.24 degrees
! Estimated noise=0.199241 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00834102 Jy
! Component: 100  -  total flux cleaned = 0.0133069 Jy
! Component: 150  -  total flux cleaned = 0.0169418 Jy
! Component: 200  -  total flux cleaned = 0.0196681 Jy
! Total flux subtracted in 200 components = 0.0196681 Jy
! Clean residual min=-0.003205 max=0.003509 Jy/beam
! Clean residual mean=0.000021 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.324723 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 55 components and 0.324723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063121Jy  sigma=1.403267
! Fit after  self-cal, rms=0.063051Jy  sigma=1.401462
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.13 x 1.205 at -12.24 degrees (North through East)
! Clean map  min=-0.002872  max=0.24722 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.04     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.03     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.04     HN        1.06     KP        1.00     
!   LA        1.00     MK        1.03     NL        1.05     OV        1.03     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        1.06     KP        1.04     
!   LA        1.02     MK        1.04     NL        1.06     OV        1.02     
!   PT        0.99     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        1.00     
!   LA        0.99     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        0.98     
!   LA        0.98     MK        1.00     NL        1.02     OV        0.98     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.03     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.04     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.04     KP        1.02     
!   LA        1.00     MK        1.04     NL        1.05     OV        1.02     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.98     MK        1.02     NL        1.02     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.98     KP        0.99     
!   LA        0.97     MK        1.04     NL        1.04     OV        0.99     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.99     KP        0.97     
!   LA        0.95     MK        0.99     NL        0.98     OV        0.94     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.98     KP        0.94     
!   LA        0.95     MK        0.97     NL        0.99     OV        0.95     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     HN        0.93     KP        0.94     
!   LA        0.95     MK        0.95     NL        0.97     OV        0.93     
!   PT        0.89     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.063051Jy  sigma=1.401462
! Fit after  self-cal, rms=0.060216Jy  sigma=1.349696
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.136 mas, bmaj=1.212 mas, bpa=-12.37 degrees
! Estimated noise=0.198784 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000674823 Jy
! Component: 100  -  total flux cleaned = 0.000736683 Jy
! Component: 150  -  total flux cleaned = 0.000740467 Jy
! Component: 200  -  total flux cleaned = 0.000722118 Jy
! Total flux subtracted in 200 components = 0.000722118 Jy
! Clean residual min=-0.001572 max=0.001545 Jy/beam
! Clean residual mean=-0.000006 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.325445 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 65 components and 0.325445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060188Jy  sigma=1.348956
! Fit after  self-cal, rms=0.060189Jy  sigma=1.348855
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060189Jy  sigma=1.348855
! Fit after  self-cal, rms=0.060135Jy  sigma=1.345443
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.137 mas, bmaj=1.212 mas, bpa=-12.55 degrees
! Estimated noise=0.198691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.83386e-05 Jy
! Component: 100  -  total flux cleaned = 2.82524e-05 Jy
! Component: 150  -  total flux cleaned = 2.80218e-05 Jy
! Component: 200  -  total flux cleaned = -1.99679e-06 Jy
! Total flux subtracted in 200 components = -1.99679e-06 Jy
! Clean residual min=-0.001402 max=0.001264 Jy/beam
! Clean residual mean=0.000002 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.325443 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 72 components and 0.325443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060123Jy  sigma=1.345172
! Fit after  self-cal, rms=0.060124Jy  sigma=1.345148
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.45491e-05 Jy
! Component: 100  -  total flux cleaned = 5.49199e-05 Jy
! Component: 150  -  total flux cleaned = 4.20457e-05 Jy
! Component: 200  -  total flux cleaned = 3.02613e-05 Jy
! Total flux subtracted in 200 components = 3.02613e-05 Jy
! Clean residual min=-0.001372 max=0.001233 Jy/beam
! Clean residual mean=0.000002 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.325473 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.325473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060118Jy  sigma=1.345028
! Fit after  self-cal, rms=0.060117Jy  sigma=1.345021
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060117Jy  sigma=1.345021
! Fit after  self-cal, rms=0.060164Jy  sigma=1.344967
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.137 mas, bmaj=1.213 mas, bpa=-13.02 degrees
! Estimated noise=0.198708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000226032 Jy
! Component: 100  -  total flux cleaned = -0.000240241 Jy
! Component: 150  -  total flux cleaned = -0.000265432 Jy
! Component: 200  -  total flux cleaned = -0.000287907 Jy
! Total flux subtracted in 200 components = -0.000287907 Jy
! Clean residual min=-0.001353 max=0.001204 Jy/beam
! Clean residual mean=0.000002 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.325185 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 73 components and 0.325185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060158Jy  sigma=1.344841
! Fit after  self-cal, rms=0.060158Jy  sigma=1.344834
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.08267e-06 Jy
! Component: 100  -  total flux cleaned = -6.22659e-07 Jy
! Component: 150  -  total flux cleaned = -8.71022e-07 Jy
! Component: 200  -  total flux cleaned = -9.96555e-06 Jy
! Total flux subtracted in 200 components = -9.96555e-06 Jy
! Clean residual min=-0.001324 max=0.001181 Jy/beam
! Clean residual mean=0.000002 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.325175 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 75 components and 0.325175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060155Jy  sigma=1.344763
! Fit after  self-cal, rms=0.060154Jy  sigma=1.344758
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060154Jy  sigma=1.344758
! Fit after  self-cal, rms=0.060195Jy  sigma=1.344727
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.302 mas, bmaj=2.362 mas, bpa=33.82 degrees
! Estimated noise=0.246907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.22107e-05 Jy
! Component: 100  -  total flux cleaned = -0.000209049 Jy
! Component: 150  -  total flux cleaned = -0.000234468 Jy
! Component: 200  -  total flux cleaned = -0.000265839 Jy
! Total flux subtracted in 200 components = -0.000265839 Jy
! Clean residual min=-0.001649 max=0.001551 Jy/beam
! Clean residual mean=0.000007 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.324909 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 77 components and 0.324909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060196Jy  sigma=1.344707
! Fit after  self-cal, rms=0.060195Jy  sigma=1.344664
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.04153e-05 Jy
! Component: 100  -  total flux cleaned = 5.23103e-05 Jy
! Component: 150  -  total flux cleaned = 3.31502e-05 Jy
! Component: 200  -  total flux cleaned = 1.5942e-05 Jy
! Total flux subtracted in 200 components = 1.5942e-05 Jy
! Clean residual min=-0.001636 max=0.001497 Jy/beam
! Clean residual mean=0.000007 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.324925 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 77 components and 0.324925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060196Jy  sigma=1.344678
! Fit after  self-cal, rms=0.060195Jy  sigma=1.344658
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=1.214 mas, bpa=-13.43 degrees
! Estimated noise=0.198743 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.138 x 1.214 at -13.43 degrees (North through East)
! Clean map  min=-0.0012206  max=0.24634 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8474 mas, bmaj=0.9182 mas, bpa=-17.8 degrees
! Estimated noise=0.43597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.179969 Jy
! Component: 100  -  total flux cleaned = 0.229913 Jy
! Component: 150  -  total flux cleaned = 0.256099 Jy
! Component: 200  -  total flux cleaned = 0.272223 Jy
! Total flux subtracted in 200 components = 0.272223 Jy
! Clean residual min=-0.004436 max=0.008653 Jy/beam
! Clean residual mean=0.000019 rms=0.001157 Jy/beam
! Combined flux in latest and established models = 0.272223 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.272223 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=1.214 mas, bpa=-13.43 degrees
! Estimated noise=0.198743 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0182912 Jy
! Component: 100  -  total flux cleaned = 0.0291592 Jy
! Component: 150  -  total flux cleaned = 0.0360538 Jy
! Component: 200  -  total flux cleaned = 0.0406118 Jy
! Total flux subtracted in 200 components = 0.0406118 Jy
! Clean residual min=-0.001796 max=0.002474 Jy/beam
! Clean residual mean=0.000022 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.312835 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 47 components and 0.312835 Jy
! Inverting map 
! Added new window around map position (-2.2, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00311866 Jy
! Component: 100  -  total flux cleaned = 0.00534792 Jy
! Component: 150  -  total flux cleaned = 0.00699525 Jy
! Component: 200  -  total flux cleaned = 0.00822615 Jy
! Total flux subtracted in 200 components = 0.00822615 Jy
! Clean residual min=-0.001283 max=0.001205 Jy/beam
! Clean residual mean=0.000009 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.321061 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 76 components and 0.321061 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.302 mas, bmaj=2.362 mas, bpa=33.82 degrees
! Estimated noise=0.246907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164345 Jy
! Component: 100  -  total flux cleaned = 0.00255454 Jy
! Component: 150  -  total flux cleaned = 0.00312299 Jy
! Component: 200  -  total flux cleaned = 0.00348522 Jy
! Total flux subtracted in 200 components = 0.00348522 Jy
! Clean residual min=-0.001588 max=0.001346 Jy/beam
! Clean residual mean=0.000008 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.324546 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201383 Jy
! Component: 100  -  total flux cleaned = 0.000239328 Jy
! Component: 150  -  total flux cleaned = 0.000273906 Jy
! Component: 200  -  total flux cleaned = 0.000299423 Jy
! Total flux subtracted in 200 components = 0.000299423 Jy
! Clean residual min=-0.001549 max=0.001347 Jy/beam
! Clean residual mean=0.000007 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.324846 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 108 components and 0.324846 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=1.214 mas, bpa=-13.43 degrees
! Estimated noise=0.198743 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000197491 Jy
! Component: 100  -  total flux cleaned = -0.000213776 Jy
! Component: 150  -  total flux cleaned = -0.000214355 Jy
! Component: 200  -  total flux cleaned = -0.000202916 Jy
! Total flux subtracted in 200 components = -0.000202916 Jy
! Clean residual min=-0.001163 max=0.001057 Jy/beam
! Clean residual mean=0.000003 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.324643 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 123 components and 0.324643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060184Jy  sigma=1.344449
! Fit after  self-cal, rms=0.060179Jy  sigma=1.344370
wmodel /J2047+5343_X_map.mod
! wmodel: Unable to open new model file: /J2047+5343_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J2047+5343_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.138 x 1.214 at -13.43 degrees (North through East)
! Clean map  min=-0.0010968  max=0.24723 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J2047+5343_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.247231 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000293731 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.356425 0.356425 0.71285 1.4257 2.8514 5.7028 11.4056 22.8112 45.6224 91.2448
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.247 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  841.692 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J2047+5343_X_dfm.log closed on Thu May 19 20:35:41 2016