! Started logfile: /scr/pima/bg219b_uvs/J1936+3642_X_dfm.log on Thu May 19 20:34:09 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1936+3642_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1936+3642_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.605962 visibilities/baseline/integration-bin.
! Found source: J1936+3642
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13416 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1936+3642_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004008Jy  sigma=25.870407
! Fit after  self-cal, rms=0.949907Jy  sigma=24.587848
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9135 mas, bmaj=1.256 mas, bpa=2.758 degrees
! Estimated noise=0.488006 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0365192 Jy
! Component: 100  -  total flux cleaned = 0.0462149 Jy
! Total flux subtracted in 100 components = 0.0462149 Jy
! Clean residual min=-0.003850 max=0.007164 Jy/beam
! Clean residual mean=-0.000002 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.0462149 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0462149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058839Jy  sigma=1.438774
! Fit after  self-cal, rms=0.056782Jy  sigma=1.383666
! Inverting map 
! Added new window around map position (1.6, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00743443 Jy
! Component: 100  -  total flux cleaned = 0.0117113 Jy
! Total flux subtracted in 100 components = 0.0117113 Jy
! Clean residual min=-0.003745 max=0.007270 Jy/beam
! Clean residual mean=-0.000003 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.0579261 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.0579261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055309Jy  sigma=1.344414
! Fit after  self-cal, rms=0.055145Jy  sigma=1.340155
! Inverting map 
! Added new window around map position (-3.6, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00613543 Jy
! Component: 100  -  total flux cleaned = 0.00978482 Jy
! Total flux subtracted in 100 components = 0.00978482 Jy
! Clean residual min=-0.003479 max=0.003710 Jy/beam
! Clean residual mean=-0.000003 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.067711 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 26 components and 0.067711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054422Jy  sigma=1.320806
! Fit after  self-cal, rms=0.054294Jy  sigma=1.317748
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.195 mas, bmaj=1.633 mas, bpa=5.956 degrees
! Estimated noise=0.246131 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00485065 Jy
! Component: 100  -  total flux cleaned = 0.00762284 Jy
! Component: 150  -  total flux cleaned = 0.00941084 Jy
! Component: 200  -  total flux cleaned = 0.00999977 Jy
! Total flux subtracted in 200 components = 0.00999977 Jy
! Clean residual min=-0.001973 max=0.002028 Jy/beam
! Clean residual mean=-0.000008 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.0777107 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 49 components and 0.0777107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053837Jy  sigma=1.305242
! Fit after  self-cal, rms=0.053775Jy  sigma=1.304419
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.195 x 1.633 at 5.956 degrees (North through East)
! Clean map  min=-0.0019394  max=0.046676 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        0.98     KP        1.00     
!   LA        0.99     MK        1.05     NL        1.15     OV        0.94     
!   PT        1.04     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.03     KP        1.03     
!   LA        1.04     MK        1.06     NL        1.06     OV        1.06     
!   PT        1.14     SC        1.15     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.09     HN        1.03     KP        1.06     
!   LA        1.03     MK        1.09     NL        1.13     OV        1.04     
!   PT        1.10     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        0.98     KP        0.99     
!   LA        0.98     MK        1.02     NL        1.17     OV        1.01     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        0.95     KP        0.98     
!   LA        0.99     MK        0.96     NL        1.00     OV        1.02     
!   PT        0.99     SC        0.91     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.89     KP        1.00     
!   LA        0.99     MK        1.09     NL        1.11     OV        1.06     
!   PT        1.06     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.94     HN        0.94     KP        1.05     
!   LA        1.01     MK        1.01     NL        0.95     OV        1.01     
!   PT        1.06     SC        1.20     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.99     HN        0.99     KP        1.09     
!   LA        0.92     MK        1.13     NL        1.17     OV        0.97     
!   PT        1.00     SC        0.91     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.93     KP        1.10     
!   LA        0.91     MK        1.02     NL        1.16     OV        0.97     
!   PT        0.92     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        0.84     KP        1.09     
!   LA        0.94     MK        1.04     NL        1.02     OV        0.95     
!   PT        0.92     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.92     HN        0.95     KP        0.95     
!   LA        0.92     MK        0.94     NL        1.03     OV        1.02     
!   PT        0.92     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.053775Jy  sigma=1.304419
! Fit after  self-cal, rms=0.053880Jy  sigma=1.297680
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.196 mas, bmaj=1.639 mas, bpa=5.973 degrees
! Estimated noise=0.250707 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165191 Jy
! Component: 100  -  total flux cleaned = 0.0019181 Jy
! Component: 150  -  total flux cleaned = 0.00199529 Jy
! Component: 200  -  total flux cleaned = 0.0020641 Jy
! Total flux subtracted in 200 components = 0.0020641 Jy
! Clean residual min=-0.001718 max=0.001828 Jy/beam
! Clean residual mean=-0.000005 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.0797748 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 0.0797748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053810Jy  sigma=1.295833
! Fit after  self-cal, rms=0.053813Jy  sigma=1.294940
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053813Jy  sigma=1.294940
! Fit after  self-cal, rms=0.054471Jy  sigma=1.292198
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.194 mas, bmaj=1.64 mas, bpa=6.818 degrees
! Estimated noise=0.253009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110356 Jy
! Component: 100  -  total flux cleaned = 0.00134684 Jy
! Component: 150  -  total flux cleaned = 0.00137473 Jy
! Component: 200  -  total flux cleaned = 0.00137503 Jy
! Total flux subtracted in 200 components = 0.00137503 Jy
! Clean residual min=-0.001747 max=0.001715 Jy/beam
! Clean residual mean=-0.000004 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.0811498 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 66 components and 0.0811498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054432Jy  sigma=1.291194
! Fit after  self-cal, rms=0.054451Jy  sigma=1.290857
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, -47.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152558 Jy
! Component: 100  -  total flux cleaned = 0.00198927 Jy
! Component: 150  -  total flux cleaned = 0.00207002 Jy
! Component: 200  -  total flux cleaned = 0.00211763 Jy
! Total flux subtracted in 200 components = 0.00211763 Jy
! Clean residual min=-0.001582 max=0.001805 Jy/beam
! Clean residual mean=-0.000004 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.0832675 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 0.0832675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054400Jy  sigma=1.289622
! Fit after  self-cal, rms=0.054374Jy  sigma=1.289158
! Inverting map 
! Added new window around map position (-39, 28.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014896 Jy
! Component: 100  -  total flux cleaned = 0.00198278 Jy
! Component: 150  -  total flux cleaned = 0.00227543 Jy
! Component: 200  -  total flux cleaned = 0.00236905 Jy
! Total flux subtracted in 200 components = 0.00236905 Jy
! Clean residual min=-0.001463 max=0.001278 Jy/beam
! Clean residual mean=-0.000004 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.0856365 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 91 components and 0.0856365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054327Jy  sigma=1.287898
! Fit after  self-cal, rms=0.054307Jy  sigma=1.287633
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054307Jy  sigma=1.287633
! Fit after  self-cal, rms=0.054623Jy  sigma=1.287415
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.191 mas, bmaj=1.642 mas, bpa=7.333 degrees
! Estimated noise=0.253698 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000878896 Jy
! Component: 100  -  total flux cleaned = 0.00128298 Jy
! Component: 150  -  total flux cleaned = 0.00142378 Jy
! Component: 200  -  total flux cleaned = 0.00144511 Jy
! Total flux subtracted in 200 components = 0.00144511 Jy
! Clean residual min=-0.001435 max=0.001266 Jy/beam
! Clean residual mean=-0.000004 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.0870816 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 99 components and 0.0870816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054600Jy  sigma=1.286842
! Fit after  self-cal, rms=0.054603Jy  sigma=1.286775
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247593 Jy
! Component: 100  -  total flux cleaned = 0.000246866 Jy
! Component: 150  -  total flux cleaned = 0.000247141 Jy
! Component: 200  -  total flux cleaned = 0.000265621 Jy
! Total flux subtracted in 200 components = 0.000265621 Jy
! Clean residual min=-0.001428 max=0.001265 Jy/beam
! Clean residual mean=-0.000004 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.0873473 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 101 components and 0.0873473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054590Jy  sigma=1.286441
! Fit after  self-cal, rms=0.054588Jy  sigma=1.286417
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054588Jy  sigma=1.286417
! Fit after  self-cal, rms=0.054813Jy  sigma=1.286363
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.528 mas, bmaj=2.901 mas, bpa=66.28 degrees
! Estimated noise=0.305708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000554386 Jy
! Component: 100  -  total flux cleaned = 0.000742591 Jy
! Component: 150  -  total flux cleaned = 0.000874282 Jy
! Component: 200  -  total flux cleaned = 0.000976501 Jy
! Total flux subtracted in 200 components = 0.000976501 Jy
! Clean residual min=-0.001579 max=0.001362 Jy/beam
! Clean residual mean=-0.000006 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.0883238 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 114 components and 0.0883238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054807Jy  sigma=1.286210
! Fit after  self-cal, rms=0.054800Jy  sigma=1.286064
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.2647e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122153 Jy
! Component: 150  -  total flux cleaned = 0.000144023 Jy
! Component: 200  -  total flux cleaned = 0.000175089 Jy
! Total flux subtracted in 200 components = 0.000175089 Jy
! Clean residual min=-0.001595 max=0.001410 Jy/beam
! Clean residual mean=-0.000006 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.0884988 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 120 components and 0.0884988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054798Jy  sigma=1.285976
! Fit after  self-cal, rms=0.054795Jy  sigma=1.285963
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.19 mas, bmaj=1.642 mas, bpa=7.518 degrees
! Estimated noise=0.254551 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.19 x 1.642 at 7.518 degrees (North through East)
! Clean map  min=-0.0013957  max=0.046064 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9099 mas, bmaj=1.265 mas, bpa=5.4 degrees
! Estimated noise=0.507039 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0394054 Jy
! Component: 100  -  total flux cleaned = 0.0527378 Jy
! Component: 150  -  total flux cleaned = 0.0610507 Jy
! Component: 200  -  total flux cleaned = 0.0668347 Jy
! Total flux subtracted in 200 components = 0.0668347 Jy
! Clean residual min=-0.003485 max=0.003416 Jy/beam
! Clean residual mean=-0.000002 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.0668346 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0668346 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.19 mas, bmaj=1.642 mas, bpa=7.518 degrees
! Estimated noise=0.254551 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0059176 Jy
! Component: 100  -  total flux cleaned = 0.00939877 Jy
! Component: 150  -  total flux cleaned = 0.0120131 Jy
! Component: 200  -  total flux cleaned = 0.014083 Jy
! Total flux subtracted in 200 components = 0.014083 Jy
! Clean residual min=-0.001927 max=0.001694 Jy/beam
! Clean residual mean=-0.000004 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.0809176 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 40 components and 0.0809176 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.528 mas, bmaj=2.901 mas, bpa=66.28 degrees
! Estimated noise=0.305708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206169 Jy
! Component: 100  -  total flux cleaned = 0.00349021 Jy
! Component: 150  -  total flux cleaned = 0.00431263 Jy
! Component: 200  -  total flux cleaned = 0.00491965 Jy
! Total flux subtracted in 200 components = 0.00491965 Jy
! Clean residual min=-0.001904 max=0.001271 Jy/beam
! Clean residual mean=-0.000006 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.0858373 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000513999 Jy
! Component: 100  -  total flux cleaned = 0.000950942 Jy
! Component: 150  -  total flux cleaned = 0.00123371 Jy
! Component: 200  -  total flux cleaned = 0.00145981 Jy
! Total flux subtracted in 200 components = 0.00145981 Jy
! Clean residual min=-0.001756 max=0.001347 Jy/beam
! Clean residual mean=-0.000005 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.0872971 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 88 components and 0.0872971 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.19 mas, bmaj=1.642 mas, bpa=7.518 degrees
! Estimated noise=0.254551 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.46429e-05 Jy
! Component: 100  -  total flux cleaned = -0.00010564 Jy
! Component: 150  -  total flux cleaned = -0.000160946 Jy
! Component: 200  -  total flux cleaned = -0.000212364 Jy
! Total flux subtracted in 200 components = -0.000212364 Jy
! Clean residual min=-0.001545 max=0.001228 Jy/beam
! Clean residual mean=-0.000004 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.0870847 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 109 components and 0.0870847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054813Jy  sigma=1.286402
! Fit after  self-cal, rms=0.054795Jy  sigma=1.286174
wmodel /J1936+3642_X_map.mod
! wmodel: Unable to open new model file: /J1936+3642_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1936+3642_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.19 x 1.642 at 7.518 degrees (North through East)
! Clean map  min=-0.0014801  max=0.043363 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1936+3642_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0433626 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000326482 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.25874 2.25874 4.51747 9.03495 18.0699 36.1398 72.2796
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.043 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  132.817 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1936+3642_X_dfm.log closed on Thu May 19 20:34:12 2016