! Started logfile: /scr/pima/bg219b_uvs/J1911-2006_X_uvs.log on Thu Apr 7 02:03:21 2016 obs /scr/pima/bg219b_uvs/J1911-2006_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J1911-2006_X_uva.fits ! AN table 1: 34 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.857516 visibilities/baseline/integration-bin. ! Found source: J1911-2006 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 15744 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1911-2006_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.630717Jy sigma=26.591432 ! Fit after self-cal, rms=0.362760Jy sigma=5.970579 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6344 mas, bmaj=1.769 mas, bpa=-0.5282 degrees ! Estimated noise=0.742729 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.958382 Jy ! Component: 100 - total flux cleaned = 1.17671 Jy ! Total flux subtracted in 100 components = 1.17671 Jy ! Clean residual min=-0.031797 max=0.084276 Jy/beam ! Clean residual mean=-0.000063 rms=0.007292 Jy/beam ! Combined flux in latest and established models = 1.17671 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.17671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.235917Jy sigma=3.811898 ! Fit after self-cal, rms=0.235892Jy sigma=3.811767 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0965547 Jy ! Component: 100 - total flux cleaned = 0.154135 Jy ! Total flux subtracted in 100 components = 0.154135 Jy ! Clean residual min=-0.021638 max=0.035413 Jy/beam ! Clean residual mean=-0.000041 rms=0.004420 Jy/beam ! Combined flux in latest and established models = 1.33085 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 20 components and 1.33084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.160198Jy sigma=2.468631 ! Fit after self-cal, rms=0.160085Jy sigma=2.467336 ! Inverting map ! Added new window around map position (1.2, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403285 Jy ! Component: 100 - total flux cleaned = 0.069525 Jy ! Total flux subtracted in 100 components = 0.069525 Jy ! Clean residual min=-0.018006 max=0.026549 Jy/beam ! Clean residual mean=-0.000030 rms=0.003623 Jy/beam ! Combined flux in latest and established models = 1.40037 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 1.40037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.138141Jy sigma=2.086706 ! Fit after self-cal, rms=0.137711Jy sigma=2.079657 ! Inverting map ! Added new window around map position (-1.4, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267448 Jy ! Component: 100 - total flux cleaned = 0.0474296 Jy ! Total flux subtracted in 100 components = 0.0474296 Jy ! Clean residual min=-0.017285 max=0.020412 Jy/beam ! Clean residual mean=-0.000022 rms=0.003185 Jy/beam ! Combined flux in latest and established models = 1.4478 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 44 components and 1.4478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.126367Jy sigma=1.893726 ! Fit after self-cal, rms=0.126204Jy sigma=1.890975 ! Inverting map ! Added new window around map position (2.2, 3.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205961 Jy ! Component: 100 - total flux cleaned = 0.0363413 Jy ! Total flux subtracted in 100 components = 0.0363413 Jy ! Clean residual min=-0.015960 max=0.017661 Jy/beam ! Clean residual mean=-0.000017 rms=0.002896 Jy/beam ! Combined flux in latest and established models = 1.48414 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 1.48414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.119362Jy sigma=1.783619 ! Fit after self-cal, rms=0.119101Jy sigma=1.777817 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8271 mas, bmaj=2.14 mas, bpa=-0.2172 degrees ! Estimated noise=0.507642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269818 Jy ! Component: 100 - total flux cleaned = 0.0459407 Jy ! Component: 150 - total flux cleaned = 0.0600867 Jy ! Component: 200 - total flux cleaned = 0.0708566 Jy ! Total flux subtracted in 200 components = 0.0708566 Jy ! Clean residual min=-0.011794 max=0.014487 Jy/beam ! Clean residual mean=-0.000017 rms=0.003035 Jy/beam ! Combined flux in latest and established models = 1.555 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 80 components and 1.555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.110085Jy sigma=1.644270 ! Fit after self-cal, rms=0.109922Jy sigma=1.639846 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8271 x 2.14 at -0.2172 degrees (North through East) ! Clean map min=-0.010847 max=1.2599 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.06 KP 0.97 ! LA 0.97 MK 0.99 NL 0.98 OV 0.96 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.07 KP 1.00 ! LA 0.99 MK 1.02 NL 1.00 OV 1.01 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.08 KP 1.03 ! LA 1.00 MK 1.01 NL 1.03 OV 1.01 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.02 KP 0.99 ! LA 0.97 MK 0.99 NL 0.98 OV 0.97 ! PT 0.97 SC 1.00 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.04 KP 1.00 ! LA 0.97 MK 1.02 NL 1.02 OV 0.98 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.06 KP 1.03 ! LA 1.00 MK 1.04 NL 1.00 OV 1.00 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.03 KP 1.00 ! LA 0.96 MK 1.01 NL 0.99 OV 0.96 ! PT 0.97 SC 1.00 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.109922Jy sigma=1.639846 ! Fit after self-cal, rms=0.095856Jy sigma=1.399187 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8325 mas, bmaj=2.15 mas, bpa=-0.1192 degrees ! Estimated noise=0.508915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.2, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442649 Jy ! Component: 100 - total flux cleaned = 0.00597141 Jy ! Component: 150 - total flux cleaned = 0.00786577 Jy ! Component: 200 - total flux cleaned = 0.00943359 Jy ! Total flux subtracted in 200 components = 0.00943359 Jy ! Clean residual min=-0.009103 max=0.010066 Jy/beam ! Clean residual mean=-0.000002 rms=0.002208 Jy/beam ! Combined flux in latest and established models = 1.56443 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 110 components and 1.56443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.092978Jy sigma=1.351177 ! Fit after self-cal, rms=0.092844Jy sigma=1.348425 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.092844Jy sigma=1.348425 ! Fit after self-cal, rms=0.084282Jy sigma=1.249340 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8336 mas, bmaj=2.151 mas, bpa=-0.1809 degrees ! Estimated noise=0.508801 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552867 Jy ! Component: 100 - total flux cleaned = 0.000126757 Jy ! Component: 150 - total flux cleaned = 0.000121242 Jy ! Component: 200 - total flux cleaned = 0.000413016 Jy ! Total flux subtracted in 200 components = 0.000413016 Jy ! Clean residual min=-0.006725 max=0.006936 Jy/beam ! Clean residual mean=-0.000008 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 1.56484 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 129 components and 1.56484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.083502Jy sigma=1.233719 ! Fit after self-cal, rms=0.083481Jy sigma=1.232953 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00651878 Jy ! Component: 100 - total flux cleaned = 0.010216 Jy ! Component: 150 - total flux cleaned = 0.0125521 Jy ! Component: 200 - total flux cleaned = 0.0135708 Jy ! Total flux subtracted in 200 components = 0.0135708 Jy ! Clean residual min=-0.006146 max=0.006415 Jy/beam ! Clean residual mean=-0.000006 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 1.57841 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 155 components and 1.57841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.082882Jy sigma=1.221069 ! Fit after self-cal, rms=0.082813Jy sigma=1.220367 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.082813Jy sigma=1.220367 ! Fit after self-cal, rms=0.080427Jy sigma=1.192502 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8341 mas, bmaj=2.151 mas, bpa=-0.1923 degrees ! Estimated noise=0.508934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012877 Jy ! Component: 100 - total flux cleaned = -0.00113376 Jy ! Component: 150 - total flux cleaned = -0.000998496 Jy ! Component: 200 - total flux cleaned = -0.0010013 Jy ! Total flux subtracted in 200 components = -0.0010013 Jy ! Clean residual min=-0.005819 max=0.005364 Jy/beam ! Clean residual mean=-0.000008 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 1.57741 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 172 components and 1.57741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.079936Jy sigma=1.184069 ! Fit after self-cal, rms=0.079925Jy sigma=1.183895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000822501 Jy ! Component: 100 - total flux cleaned = 0.00102643 Jy ! Component: 150 - total flux cleaned = 0.00121594 Jy ! Component: 200 - total flux cleaned = 0.00130363 Jy ! Total flux subtracted in 200 components = 0.00130363 Jy ! Clean residual min=-0.005678 max=0.005130 Jy/beam ! Clean residual mean=-0.000008 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 1.57872 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 179 components and 1.57872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.079690Jy sigma=1.180189 ! Fit after self-cal, rms=0.079684Jy sigma=1.180093 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.079684Jy sigma=1.180093 ! Fit after self-cal, rms=0.079533Jy sigma=1.178700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.13 mas, bmaj=4.522 mas, bpa=3.038 degrees ! Estimated noise=0.664433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117963 Jy ! Component: 100 - total flux cleaned = -0.000815279 Jy ! Component: 150 - total flux cleaned = -0.00060797 Jy ! Component: 200 - total flux cleaned = -0.000417645 Jy ! Total flux subtracted in 200 components = -0.000417645 Jy ! Clean residual min=-0.006756 max=0.007091 Jy/beam ! Clean residual mean=-0.000014 rms=0.001481 Jy/beam ! Combined flux in latest and established models = 1.5783 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 197 components and 1.5783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.079343Jy sigma=1.175271 ! Fit after self-cal, rms=0.079335Jy sigma=1.175051 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331568 Jy ! Component: 100 - total flux cleaned = 0.00434261 Jy ! Component: 150 - total flux cleaned = 0.00457485 Jy ! Component: 200 - total flux cleaned = 0.0045691 Jy ! Total flux subtracted in 200 components = 0.0045691 Jy ! Clean residual min=-0.005521 max=0.004418 Jy/beam ! Clean residual mean=-0.000009 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 1.58287 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 224 components and 1.58287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.079002Jy sigma=1.170687 ! Fit after self-cal, rms=0.078981Jy sigma=1.169929 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8342 mas, bmaj=2.152 mas, bpa=-0.1847 degrees ! Estimated noise=0.508568 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8342 x 2.152 at -0.1847 degrees (North through East) ! Clean map min=-0.0064632 max=1.2624 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.078981Jy sigma=1.169929 ! Fit after self-cal, rms=0.070041Jy sigma=0.987227 ! Inverting map and beam ! Estimated beam: bmin=0.834 mas, bmaj=2.151 mas, bpa=-0.114 degrees ! Estimated noise=0.507133 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00216469 Jy ! Component: 100 - total flux cleaned = -0.00231206 Jy ! Component: 150 - total flux cleaned = -0.00231343 Jy ! Component: 200 - total flux cleaned = -0.00168171 Jy ! Total flux subtracted in 200 components = -0.00168171 Jy ! Clean residual min=-0.004000 max=0.003577 Jy/beam ! Clean residual mean=-0.000006 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 1.58119 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 251 components and 1.58119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.069533Jy sigma=0.979624 ! Fit after self-cal, rms=0.069526Jy sigma=0.979386 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424701 Jy ! Component: 100 - total flux cleaned = 0.000977985 Jy ! Component: 150 - total flux cleaned = 0.00140718 Jy ! Component: 200 - total flux cleaned = 0.00164876 Jy ! Total flux subtracted in 200 components = 0.00164876 Jy ! Clean residual min=-0.003676 max=0.003394 Jy/beam ! Clean residual mean=-0.000006 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 1.58283 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 265 components and 1.58283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.069299Jy sigma=0.976364 ! Fit after self-cal, rms=0.069297Jy sigma=0.976292 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.069297Jy sigma=0.976292 ! Fit after self-cal, rms=0.068739Jy sigma=0.967077 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6376 mas, bmaj=1.771 mas, bpa=-0.3417 degrees ! Estimated noise=0.744229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.960232 Jy ! Component: 100 - total flux cleaned = 1.17717 Jy ! Component: 150 - total flux cleaned = 1.26947 Jy ! Component: 200 - total flux cleaned = 1.3243 Jy ! Total flux subtracted in 200 components = 1.3243 Jy ! Clean residual min=-0.014246 max=0.028079 Jy/beam ! Clean residual mean=-0.000033 rms=0.003119 Jy/beam ! Combined flux in latest and established models = 1.3243 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.3243 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8341 mas, bmaj=2.151 mas, bpa=-0.0923 degrees ! Estimated noise=0.50634 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0608575 Jy ! Component: 100 - total flux cleaned = 0.0992176 Jy ! Component: 150 - total flux cleaned = 0.125845 Jy ! Component: 200 - total flux cleaned = 0.145403 Jy ! Total flux subtracted in 200 components = 0.145403 Jy ! Clean residual min=-0.009069 max=0.011228 Jy/beam ! Clean residual mean=-0.000039 rms=0.002336 Jy/beam ! Combined flux in latest and established models = 1.4697 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 84 components and 1.4697 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148525 Jy ! Component: 100 - total flux cleaned = 0.0266875 Jy ! Component: 150 - total flux cleaned = 0.036742 Jy ! Component: 200 - total flux cleaned = 0.0454482 Jy ! Total flux subtracted in 200 components = 0.0454482 Jy ! Clean residual min=-0.006887 max=0.006935 Jy/beam ! Clean residual mean=-0.000024 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 1.51515 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 135 components and 1.51515 Jy ! Inverting map ! Added new window around map position (-4.8, 17.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00796193 Jy ! Component: 100 - total flux cleaned = 0.0144376 Jy ! Component: 150 - total flux cleaned = 0.0190116 Jy ! Component: 200 - total flux cleaned = 0.0229217 Jy ! Total flux subtracted in 200 components = 0.0229217 Jy ! Clean residual min=-0.005441 max=0.004441 Jy/beam ! Clean residual mean=-0.000018 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 1.53807 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 170 components and 1.53807 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.132 mas, bmaj=4.518 mas, bpa=3.063 degrees ! Estimated noise=0.661413 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00857578 Jy ! Component: 100 - total flux cleaned = 0.0149342 Jy ! Component: 150 - total flux cleaned = 0.0186481 Jy ! Component: 200 - total flux cleaned = 0.0216149 Jy ! Total flux subtracted in 200 components = 0.0216149 Jy ! Clean residual min=-0.004636 max=0.004334 Jy/beam ! Clean residual mean=-0.000024 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 1.55969 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274512 Jy ! Component: 100 - total flux cleaned = 0.00500776 Jy ! Component: 150 - total flux cleaned = 0.0070168 Jy ! Component: 200 - total flux cleaned = 0.00881497 Jy ! Total flux subtracted in 200 components = 0.00881497 Jy ! Clean residual min=-0.004210 max=0.003531 Jy/beam ! Clean residual mean=-0.000019 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 1.5685 Jy ! Adding 136 model components to the UV plane model. ! The established model now contains 292 components and 1.5685 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8341 mas, bmaj=2.151 mas, bpa=-0.0923 degrees ! Estimated noise=0.50634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246848 Jy ! Component: 100 - total flux cleaned = 0.00222435 Jy ! Component: 150 - total flux cleaned = 0.00390303 Jy ! Component: 200 - total flux cleaned = 0.00510614 Jy ! Total flux subtracted in 200 components = 0.00510614 Jy ! Clean residual min=-0.003261 max=0.002896 Jy/beam ! Clean residual mean=-0.000007 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 1.57361 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 325 components and 1.57361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.068359Jy sigma=0.963253 ! Fit after self-cal, rms=0.068268Jy sigma=0.961557 wmodel /scr/pima/bg219b_uvs/J1911-2006_X_map.mod ! Writing 325 model components to file: /scr/pima/bg219b_uvs/J1911-2006_X_map.mod wobs /scr/pima/bg219b_uvs/J1911-2006_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219b_uvs/J1911-2006_X_uvs.fits wwins /scr/pima/bg219b_uvs/J1911-2006_X_map.win ! wwins: Wrote 9 windows to /scr/pima/bg219b_uvs/J1911-2006_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126298 Jy ! Component: 100 - total flux cleaned = -0.00194795 Jy ! Component: 150 - total flux cleaned = -0.00270138 Jy ! Component: 200 - total flux cleaned = -0.00332735 Jy ! Component: 250 - total flux cleaned = -0.00383971 Jy ! Component: 300 - total flux cleaned = -0.00411193 Jy ! Component: 350 - total flux cleaned = -0.00420167 Jy ! Component: 400 - total flux cleaned = -0.00441938 Jy ! Component: 450 - total flux cleaned = -0.00454792 Jy ! Component: 500 - total flux cleaned = -0.00479869 Jy ! Component: 550 - total flux cleaned = -0.00496284 Jy ! Component: 600 - total flux cleaned = -0.00524574 Jy ! Component: 650 - total flux cleaned = -0.00540453 Jy ! Component: 700 - total flux cleaned = -0.00559962 Jy ! Component: 750 - total flux cleaned = -0.00567612 Jy ! Component: 800 - total flux cleaned = -0.00575236 Jy ! Component: 850 - total flux cleaned = -0.00594004 Jy ! Component: 900 - total flux cleaned = -0.00605104 Jy ! Component: 950 - total flux cleaned = -0.00630526 Jy ! Component: 1000 - total flux cleaned = -0.00637646 Jy ! Component: 1050 - total flux cleaned = -0.00655238 Jy ! Component: 1100 - total flux cleaned = -0.00651691 Jy ! Component: 1150 - total flux cleaned = -0.00665538 Jy ! Component: 1200 - total flux cleaned = -0.00679179 Jy ! Component: 1250 - total flux cleaned = -0.00692668 Jy ! Component: 1300 - total flux cleaned = -0.00699291 Jy ! Component: 1350 - total flux cleaned = -0.00709224 Jy ! Component: 1400 - total flux cleaned = -0.00732067 Jy ! Component: 1450 - total flux cleaned = -0.00744939 Jy ! Component: 1500 - total flux cleaned = -0.00754532 Jy ! Component: 1550 - total flux cleaned = -0.00770312 Jy ! Component: 1600 - total flux cleaned = -0.00776577 Jy ! Component: 1650 - total flux cleaned = -0.00792094 Jy ! Component: 1700 - total flux cleaned = -0.00801322 Jy ! Component: 1750 - total flux cleaned = -0.00813481 Jy ! Component: 1800 - total flux cleaned = -0.00816512 Jy ! Component: 1850 - total flux cleaned = -0.0082845 Jy ! Component: 1900 - total flux cleaned = -0.00834352 Jy ! Component: 1950 - total flux cleaned = -0.00843142 Jy ! Component: 2000 - total flux cleaned = -0.00851817 Jy ! Component: 2050 - total flux cleaned = -0.00860398 Jy ! Component: 2100 - total flux cleaned = -0.00860382 Jy ! Component: 2150 - total flux cleaned = -0.00871632 Jy ! Component: 2200 - total flux cleaned = -0.00882775 Jy ! Component: 2250 - total flux cleaned = -0.0088829 Jy ! Component: 2300 - total flux cleaned = -0.00893766 Jy ! Component: 2350 - total flux cleaned = -0.00910064 Jy ! Component: 2400 - total flux cleaned = -0.00901955 Jy ! Component: 2450 - total flux cleaned = -0.00907325 Jy ! Component: 2500 - total flux cleaned = -0.00912652 Jy ! Component: 2550 - total flux cleaned = -0.00933657 Jy ! Component: 2600 - total flux cleaned = -0.0093366 Jy ! Component: 2650 - total flux cleaned = -0.00944024 Jy ! Component: 2700 - total flux cleaned = -0.00946579 Jy ! Component: 2750 - total flux cleaned = -0.00938935 Jy ! Component: 2800 - total flux cleaned = -0.00944029 Jy ! Component: 2850 - total flux cleaned = -0.00956636 Jy ! Component: 2900 - total flux cleaned = -0.00966619 Jy ! Component: 2950 - total flux cleaned = -0.00979025 Jy ! Component: 3000 - total flux cleaned = -0.00981469 Jy ! Component: 3050 - total flux cleaned = -0.00983902 Jy ! Component: 3100 - total flux cleaned = -0.00993616 Jy ! Component: 3150 - total flux cleaned = -0.00996014 Jy ! Component: 3200 - total flux cleaned = -0.00996016 Jy ! Component: 3250 - total flux cleaned = -0.0100553 Jy ! Component: 3300 - total flux cleaned = -0.0100551 Jy ! Component: 3350 - total flux cleaned = -0.0100781 Jy ! Component: 3400 - total flux cleaned = -0.0101013 Jy ! Component: 3450 - total flux cleaned = -0.0100783 Jy ! Component: 3500 - total flux cleaned = -0.0101701 Jy ! Component: 3550 - total flux cleaned = -0.0102384 Jy ! Component: 3600 - total flux cleaned = -0.0102838 Jy ! Component: 3650 - total flux cleaned = -0.0103516 Jy ! Component: 3700 - total flux cleaned = -0.0102845 Jy ! Component: 3750 - total flux cleaned = -0.010329 Jy ! Component: 3800 - total flux cleaned = -0.0104615 Jy ! Component: 3850 - total flux cleaned = -0.0103297 Jy ! Component: 3900 - total flux cleaned = -0.0103515 Jy ! Component: 3950 - total flux cleaned = -0.0104381 Jy ! Component: 4000 - total flux cleaned = -0.0104165 Jy ! Component: 4050 - total flux cleaned = -0.0103949 Jy ! Total flux subtracted in 4096 components = -0.0103737 Jy ! Clean residual min=-0.001220 max=0.001073 Jy/beam ! Clean residual mean=0.000000 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 1.56323 Jy keep ! Adding 340 model components to the UV plane model. ! The established model now contains 665 components and 1.56323 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219b_uvs/J1911-2006_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8341 x 2.151 at -0.0923 degrees (North through East) ! Clean map min=-0.0035461 max=1.2641 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1911-2006_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.26412 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000376394 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0893255 0.0893255 0.178651 0.357302 0.714604 1.42921 2.85842 5.71683 11.4337 22.8673 45.7347 91.4693 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.264 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3358.5 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J1911-2006_X_uvs.log closed on Thu Apr 7 02:03:26 2016