! Started logfile: /scr/pima/bg219b_uvs/J1911-2006_X_dfm.log on Thu May 19 20:33:35 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1911-2006_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1911-2006_X_uva.fits
! AN table 1: 34 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.857516 visibilities/baseline/integration-bin.
! Found source: J1911-2006
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15744 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1911-2006_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.672727Jy  sigma=26.450248
! Fit after  self-cal, rms=0.402055Jy  sigma=6.336033
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6168 mas, bmaj=1.71 mas, bpa=-0.3923 degrees
! Estimated noise=0.612087 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.977386 Jy
! Component: 100  -  total flux cleaned = 1.19981 Jy
! Total flux subtracted in 100 components = 1.19981 Jy
! Clean residual min=-0.035074 max=0.085384 Jy/beam
! Clean residual mean=-0.000077 rms=0.007035 Jy/beam
! Combined flux in latest and established models = 1.19981 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 1.19981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.256178Jy  sigma=3.951665
! Fit after  self-cal, rms=0.256155Jy  sigma=3.951468
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0990262 Jy
! Component: 100  -  total flux cleaned = 0.159333 Jy
! Total flux subtracted in 100 components = 0.159333 Jy
! Clean residual min=-0.024014 max=0.034870 Jy/beam
! Clean residual mean=-0.000051 rms=0.004512 Jy/beam
! Combined flux in latest and established models = 1.35914 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 21 components and 1.35914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.178179Jy  sigma=2.639443
! Fit after  self-cal, rms=0.178087Jy  sigma=2.638420
! Inverting map 
! Added new window around map position (1.2, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0419072 Jy
! Component: 100  -  total flux cleaned = 0.072683 Jy
! Total flux subtracted in 100 components = 0.072683 Jy
! Clean residual min=-0.020484 max=0.026887 Jy/beam
! Clean residual mean=-0.000040 rms=0.003793 Jy/beam
! Combined flux in latest and established models = 1.43182 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 34 components and 1.43182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.155413Jy  sigma=2.269079
! Fit after  self-cal, rms=0.155113Jy  sigma=2.263981
! Inverting map 
! Added new window around map position (-1.4, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0277521 Jy
! Component: 100  -  total flux cleaned = 0.0494889 Jy
! Total flux subtracted in 100 components = 0.0494889 Jy
! Clean residual min=-0.018538 max=0.021637 Jy/beam
! Clean residual mean=-0.000032 rms=0.003414 Jy/beam
! Combined flux in latest and established models = 1.48131 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 44 components and 1.48131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.143624Jy  sigma=2.088025
! Fit after  self-cal, rms=0.143492Jy  sigma=2.085862
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8207 mas, bmaj=2.117 mas, bpa=-0.383 degrees
! Estimated noise=0.399916 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.2, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0367838 Jy
! Component: 100  -  total flux cleaned = 0.0625003 Jy
! Component: 150  -  total flux cleaned = 0.0817426 Jy
! Component: 200  -  total flux cleaned = 0.0967838 Jy
! Total flux subtracted in 200 components = 0.0967838 Jy
! Clean residual min=-0.013197 max=0.019493 Jy/beam
! Clean residual mean=-0.000038 rms=0.003411 Jy/beam
! Combined flux in latest and established models = 1.5781 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 67 components and 1.5781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.129476Jy  sigma=1.882980
! Fit after  self-cal, rms=0.128900Jy  sigma=1.870643
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8207 x 2.117 at -0.383 degrees (North through East)
! Clean map  min=-0.012105  max=1.2986 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.09     KP        0.98     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        1.10     KP        1.01     
!   LA        0.99     MK        1.03     NL        1.02     OV        1.02     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        1.11     KP        1.04     
!   LA        1.01     MK        1.02     NL        1.04     OV        1.02     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.05     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.98     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.06     KP        0.99     
!   LA        0.97     MK        0.99     NL        1.00     OV        0.98     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.07     KP        1.01     
!   LA        0.98     MK        1.03     NL        1.03     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.08     KP        1.04     
!   LA        1.00     MK        1.05     NL        1.01     OV        1.02     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.05     KP        1.01     
!   LA        0.97     MK        1.02     NL        1.00     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.04     KP        1.00     
!   LA        0.96     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.03     KP        0.98     
!   LA        0.94     MK        0.99     NL        0.97     OV        0.96     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.05     KP        0.96     
!   LA        0.94     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.94     HN        0.99     KP        0.97     
!   LA        0.94     MK        0.97     NL        0.94     OV        0.93     
!   PT        0.92     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.128900Jy  sigma=1.870643
! Fit after  self-cal, rms=0.100878Jy  sigma=1.428614
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8261 mas, bmaj=2.125 mas, bpa=-0.2267 degrees
! Estimated noise=0.399182 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.2, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00884089 Jy
! Component: 100  -  total flux cleaned = 0.0119611 Jy
! Component: 150  -  total flux cleaned = 0.013519 Jy
! Component: 200  -  total flux cleaned = 0.0153783 Jy
! Total flux subtracted in 200 components = 0.0153783 Jy
! Clean residual min=-0.009846 max=0.011239 Jy/beam
! Clean residual mean=-0.000003 rms=0.002055 Jy/beam
! Combined flux in latest and established models = 1.59347 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 97 components and 1.59347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098037Jy  sigma=1.386277
! Fit after  self-cal, rms=0.097880Jy  sigma=1.383356
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.097880Jy  sigma=1.383356
! Fit after  self-cal, rms=0.089068Jy  sigma=1.280662
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.126 mas, bpa=-0.2737 degrees
! Estimated noise=0.398962 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143058 Jy
! Component: 100  -  total flux cleaned = 0.0013901 Jy
! Component: 150  -  total flux cleaned = 0.00233396 Jy
! Component: 200  -  total flux cleaned = 0.00287298 Jy
! Total flux subtracted in 200 components = 0.00287298 Jy
! Clean residual min=-0.006395 max=0.007494 Jy/beam
! Clean residual mean=-0.000007 rms=0.001427 Jy/beam
! Combined flux in latest and established models = 1.59635 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 118 components and 1.59635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088349Jy  sigma=1.268057
! Fit after  self-cal, rms=0.088321Jy  sigma=1.267380
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.2, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00659747 Jy
! Component: 100  -  total flux cleaned = 0.00991522 Jy
! Component: 150  -  total flux cleaned = 0.0118204 Jy
! Component: 200  -  total flux cleaned = 0.0126002 Jy
! Total flux subtracted in 200 components = 0.0126002 Jy
! Clean residual min=-0.005748 max=0.006420 Jy/beam
! Clean residual mean=-0.000005 rms=0.001301 Jy/beam
! Combined flux in latest and established models = 1.60895 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 143 components and 1.60895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087722Jy  sigma=1.257006
! Fit after  self-cal, rms=0.087661Jy  sigma=1.256335
! Inverting map 
! Added new window around map position (-0.6, 5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0054059 Jy
! Component: 100  -  total flux cleaned = 0.00738126 Jy
! Component: 150  -  total flux cleaned = 0.00864188 Jy
! Component: 200  -  total flux cleaned = 0.0094698 Jy
! Total flux subtracted in 200 components = 0.0094698 Jy
! Clean residual min=-0.005222 max=0.005750 Jy/beam
! Clean residual mean=-0.000002 rms=0.001227 Jy/beam
! Combined flux in latest and established models = 1.61842 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 163 components and 1.61842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087220Jy  sigma=1.248915
! Fit after  self-cal, rms=0.087193Jy  sigma=1.248310
! Inverting map 
! Added new window around map position (-2.6, 26.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00499593 Jy
! Component: 100  -  total flux cleaned = 0.00596211 Jy
! Component: 150  -  total flux cleaned = 0.00648801 Jy
! Component: 200  -  total flux cleaned = 0.00707107 Jy
! Total flux subtracted in 200 components = 0.00707107 Jy
! Clean residual min=-0.004887 max=0.004639 Jy/beam
! Clean residual mean=-0.000002 rms=0.001172 Jy/beam
! Combined flux in latest and established models = 1.62549 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 179 components and 1.62549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086793Jy  sigma=1.241907
! Fit after  self-cal, rms=0.086771Jy  sigma=1.241422
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086771Jy  sigma=1.241422
! Fit after  self-cal, rms=0.084716Jy  sigma=1.216053
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8271 mas, bmaj=2.125 mas, bpa=-0.2828 degrees
! Estimated noise=0.399193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000307442 Jy
! Component: 100  -  total flux cleaned = 0.000781995 Jy
! Component: 150  -  total flux cleaned = 0.00148826 Jy
! Component: 200  -  total flux cleaned = 0.00210422 Jy
! Total flux subtracted in 200 components = 0.00210422 Jy
! Clean residual min=-0.004583 max=0.003744 Jy/beam
! Clean residual mean=-0.000004 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 1.62759 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 192 components and 1.62759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084315Jy  sigma=1.209973
! Fit after  self-cal, rms=0.084312Jy  sigma=1.209817
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00071958 Jy
! Component: 100  -  total flux cleaned = 0.000896949 Jy
! Component: 150  -  total flux cleaned = 0.000734044 Jy
! Component: 200  -  total flux cleaned = 0.000655302 Jy
! Total flux subtracted in 200 components = 0.000655302 Jy
! Clean residual min=-0.004561 max=0.003672 Jy/beam
! Clean residual mean=-0.000004 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 1.62825 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 203 components and 1.62825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084155Jy  sigma=1.207566
! Fit after  self-cal, rms=0.084153Jy  sigma=1.207497
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084153Jy  sigma=1.207497
! Fit after  self-cal, rms=0.084061Jy  sigma=1.206393
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.125 mas, bmaj=4.51 mas, bpa=2.912 degrees
! Estimated noise=0.522761 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000624903 Jy
! Component: 100  -  total flux cleaned = 0.00113244 Jy
! Component: 150  -  total flux cleaned = 0.00104786 Jy
! Component: 200  -  total flux cleaned = 0.000830756 Jy
! Total flux subtracted in 200 components = 0.000830756 Jy
! Clean residual min=-0.005566 max=0.004571 Jy/beam
! Clean residual mean=-0.000006 rms=0.001274 Jy/beam
! Combined flux in latest and established models = 1.62908 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 220 components and 1.62908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083972Jy  sigma=1.205104
! Fit after  self-cal, rms=0.083962Jy  sigma=1.204882
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000511023 Jy
! Component: 100  -  total flux cleaned = 0.000516059 Jy
! Component: 150  -  total flux cleaned = 0.000574945 Jy
! Component: 200  -  total flux cleaned = 0.000474233 Jy
! Total flux subtracted in 200 components = 0.000474233 Jy
! Clean residual min=-0.005656 max=0.004514 Jy/beam
! Clean residual mean=-0.000006 rms=0.001254 Jy/beam
! Combined flux in latest and established models = 1.62955 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 227 components and 1.62955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083946Jy  sigma=1.204722
! Fit after  self-cal, rms=0.083941Jy  sigma=1.204559
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8271 mas, bmaj=2.125 mas, bpa=-0.2901 degrees
! Estimated noise=0.399032 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8271 x 2.125 at -0.2901 degrees (North through East)
! Clean map  min=-0.0039268  max=1.2943 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083941Jy  sigma=1.204559
! Fit after  self-cal, rms=0.075834Jy  sigma=1.049748
! Inverting map and beam 
! Estimated beam: bmin=0.8273 mas, bmaj=2.126 mas, bpa=-0.2611 degrees
! Estimated noise=0.397949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00344664 Jy
! Component: 100  -  total flux cleaned = -0.00442059 Jy
! Component: 150  -  total flux cleaned = -0.00520632 Jy
! Component: 200  -  total flux cleaned = -0.00564365 Jy
! Total flux subtracted in 200 components = -0.00564365 Jy
! Clean residual min=-0.004012 max=0.003563 Jy/beam
! Clean residual mean=-0.000005 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 1.62391 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 241 components and 1.62391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075476Jy  sigma=1.044601
! Fit after  self-cal, rms=0.075468Jy  sigma=1.044491
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.93743e-05 Jy
! Component: 100  -  total flux cleaned = -7.79707e-05 Jy
! Component: 150  -  total flux cleaned = -6.39844e-06 Jy
! Component: 200  -  total flux cleaned = -7.25364e-05 Jy
! Total flux subtracted in 200 components = -7.25364e-05 Jy
! Clean residual min=-0.003977 max=0.003477 Jy/beam
! Clean residual mean=-0.000005 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 1.62384 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 253 components and 1.62384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075331Jy  sigma=1.042630
! Fit after  self-cal, rms=0.075328Jy  sigma=1.042584
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075328Jy  sigma=1.042584
! Fit after  self-cal, rms=0.075123Jy  sigma=1.040509
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6204 mas, bmaj=1.711 mas, bpa=-0.176 degrees
! Estimated noise=0.61165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.976632 Jy
! Component: 100  -  total flux cleaned = 1.19666 Jy
! Component: 150  -  total flux cleaned = 1.29017 Jy
! Component: 200  -  total flux cleaned = 1.34721 Jy
! Total flux subtracted in 200 components = 1.34721 Jy
! Clean residual min=-0.012418 max=0.029747 Jy/beam
! Clean residual mean=-0.000032 rms=0.002891 Jy/beam
! Combined flux in latest and established models = 1.34721 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 1.34721 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8274 mas, bmaj=2.126 mas, bpa=-0.235 degrees
! Estimated noise=0.397049 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0646681 Jy
! Component: 100  -  total flux cleaned = 0.104443 Jy
! Component: 150  -  total flux cleaned = 0.131871 Jy
! Component: 200  -  total flux cleaned = 0.151871 Jy
! Total flux subtracted in 200 components = 0.151871 Jy
! Clean residual min=-0.007972 max=0.011520 Jy/beam
! Clean residual mean=-0.000041 rms=0.002400 Jy/beam
! Combined flux in latest and established models = 1.49908 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 85 components and 1.49908 Jy
! Inverting map 
! Added new window around map position (-0.4, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151238 Jy
! Component: 100  -  total flux cleaned = 0.0273376 Jy
! Component: 150  -  total flux cleaned = 0.0376504 Jy
! Component: 200  -  total flux cleaned = 0.0465417 Jy
! Total flux subtracted in 200 components = 0.0465417 Jy
! Clean residual min=-0.005767 max=0.006671 Jy/beam
! Clean residual mean=-0.000026 rms=0.001522 Jy/beam
! Combined flux in latest and established models = 1.54562 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 129 components and 1.54562 Jy
! Inverting map 
! Added new window around map position (-4.6, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00796252 Jy
! Component: 100  -  total flux cleaned = 0.0147786 Jy
! Component: 150  -  total flux cleaned = 0.020789 Jy
! Component: 200  -  total flux cleaned = 0.0261247 Jy
! Total flux subtracted in 200 components = 0.0261247 Jy
! Clean residual min=-0.004930 max=0.004624 Jy/beam
! Clean residual mean=-0.000019 rms=0.001130 Jy/beam
! Combined flux in latest and established models = 1.57175 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 164 components and 1.57175 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.127 mas, bmaj=4.509 mas, bpa=2.912 degrees
! Estimated noise=0.519772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00876707 Jy
! Component: 100  -  total flux cleaned = 0.0155554 Jy
! Component: 150  -  total flux cleaned = 0.021008 Jy
! Component: 200  -  total flux cleaned = 0.0254916 Jy
! Total flux subtracted in 200 components = 0.0254916 Jy
! Clean residual min=-0.005379 max=0.004670 Jy/beam
! Clean residual mean=-0.000025 rms=0.001400 Jy/beam
! Combined flux in latest and established models = 1.59724 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00374227 Jy
! Component: 100  -  total flux cleaned = 0.00689362 Jy
! Component: 150  -  total flux cleaned = 0.00956334 Jy
! Component: 200  -  total flux cleaned = 0.0118368 Jy
! Total flux subtracted in 200 components = 0.0118368 Jy
! Clean residual min=-0.005038 max=0.004131 Jy/beam
! Clean residual mean=-0.000018 rms=0.001202 Jy/beam
! Combined flux in latest and established models = 1.60907 Jy
! Adding 115 model components to the UV plane model.
! The established model now contains 263 components and 1.60907 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8274 mas, bmaj=2.126 mas, bpa=-0.235 degrees
! Estimated noise=0.397049 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214139 Jy
! Component: 100  -  total flux cleaned = 0.00335407 Jy
! Component: 150  -  total flux cleaned = 0.00385717 Jy
! Component: 200  -  total flux cleaned = 0.00424404 Jy
! Total flux subtracted in 200 components = 0.00424404 Jy
! Clean residual min=-0.004173 max=0.003231 Jy/beam
! Clean residual mean=-0.000008 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 1.61332 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 286 components and 1.61332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074799Jy  sigma=1.038278
! Fit after  self-cal, rms=0.074728Jy  sigma=1.036745
wmodel /J1911-2006_X_map.mod
! wmodel: Unable to open new model file: /J1911-2006_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1911-2006_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8274 x 2.126 at -0.235 degrees (North through East)
! Clean map  min=-0.0038368  max=1.2939 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1911-2006_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.29388 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000749169 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.173703 0.173703 0.347406 0.694812 1.38962 2.77925 5.5585 11.117 22.234 44.468 88.936
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.293 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1727.08 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1911-2006_X_dfm.log closed on Thu May 19 20:33:39 2016