! Started logfile: /scr/pima/bg219b_uvs/J1854-1539_X_dfm.log on Thu May 19 20:32:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1854-1539_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1854-1539_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.865079 visibilities/baseline/integration-bin.
! Found source: J1854-1539
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13080 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1854-1539_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003447Jy  sigma=23.233672
! Fit after  self-cal, rms=0.896579Jy  sigma=20.675570
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6371 mas, bmaj=1.68 mas, bpa=-0.9617 degrees
! Estimated noise=0.485941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.07366 Jy
! Component: 100  -  total flux cleaned = 0.0977047 Jy
! Total flux subtracted in 100 components = 0.0977047 Jy
! Clean residual min=-0.005394 max=0.011853 Jy/beam
! Clean residual mean=0.000003 rms=0.001451 Jy/beam
! Combined flux in latest and established models = 0.0977047 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0977047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071139Jy  sigma=1.529179
! Fit after  self-cal, rms=0.070986Jy  sigma=1.525517
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143822 Jy
! Component: 100  -  total flux cleaned = 0.0232446 Jy
! Total flux subtracted in 100 components = 0.0232446 Jy
! Clean residual min=-0.003434 max=0.004621 Jy/beam
! Clean residual mean=0.000001 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.120949 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 31 components and 0.120949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066718Jy  sigma=1.400961
! Fit after  self-cal, rms=0.066697Jy  sigma=1.400161
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8187 mas, bmaj=2.055 mas, bpa=-0.3931 degrees
! Estimated noise=0.306284 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00890353 Jy
! Component: 100  -  total flux cleaned = 0.0134841 Jy
! Component: 150  -  total flux cleaned = 0.0159685 Jy
! Component: 200  -  total flux cleaned = 0.017324 Jy
! Total flux subtracted in 200 components = 0.017324 Jy
! Clean residual min=-0.002500 max=0.003081 Jy/beam
! Clean residual mean=-0.000003 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.138273 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 46 components and 0.138273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065752Jy  sigma=1.368252
! Fit after  self-cal, rms=0.065731Jy  sigma=1.367650
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8187 x 2.055 at -0.3931 degrees (North through East)
! Clean map  min=-0.0022659  max=0.1027 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.14     KP        0.94     
!   LA        1.01     MK        0.97     NL        0.99     OV        0.94     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        1.09     KP        1.00     
!   LA        0.95     MK        1.13     NL        1.05     OV        1.02     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.05     HN        1.16     KP        0.97     
!   LA        1.02     MK        1.12     NL        1.04     OV        1.00     
!   PT        0.97     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        1.05     KP        0.98     
!   LA        0.97     MK        1.05     NL        0.98     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.05     HN        1.10     KP        0.96     
!   LA        0.99     MK        0.99     NL        0.99     OV        0.95     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.07     HN        1.11     KP        0.97     
!   LA        1.00     MK        0.99     NL        1.07     OV        0.97     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.96     HN        1.07     KP        0.97     
!   LA        1.04     MK        1.02     NL        1.09     OV        0.98     
!   PT        1.06     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.11     KP        0.99     
!   LA        1.00     MK        1.04     NL        1.03     OV        0.97     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.04     HN        1.04     KP        0.99     
!   LA        0.94     MK        0.97     NL        1.00     OV        0.93     
!   PT        0.88     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.11     KP        1.00     
!   LA        0.99     MK        0.96     NL        0.96     OV        0.97     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.94     HN        1.03     KP        0.98     
!   LA        1.00     MK        0.95     NL        0.90     OV        0.89     
!   PT        0.86     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.065731Jy  sigma=1.367650
! Fit after  self-cal, rms=0.066708Jy  sigma=1.352981
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8239 mas, bmaj=2.065 mas, bpa=-0.1069 degrees
! Estimated noise=0.306543 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000499209 Jy
! Component: 100  -  total flux cleaned = -0.0005112 Jy
! Component: 150  -  total flux cleaned = -0.000533207 Jy
! Component: 200  -  total flux cleaned = -0.000533075 Jy
! Total flux subtracted in 200 components = -0.000533075 Jy
! Clean residual min=-0.001924 max=0.002253 Jy/beam
! Clean residual mean=-0.000005 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.13774 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 47 components and 0.13774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066699Jy  sigma=1.352899
! Fit after  self-cal, rms=0.066766Jy  sigma=1.352701
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066766Jy  sigma=1.352701
! Fit after  self-cal, rms=0.067930Jy  sigma=1.345872
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8248 mas, bmaj=2.066 mas, bpa=-0.3742 degrees
! Estimated noise=0.306043 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000387827 Jy
! Component: 100  -  total flux cleaned = -0.000414074 Jy
! Component: 150  -  total flux cleaned = -0.000446636 Jy
! Component: 200  -  total flux cleaned = -0.00046555 Jy
! Total flux subtracted in 200 components = -0.00046555 Jy
! Clean residual min=-0.001839 max=0.002150 Jy/beam
! Clean residual mean=-0.000004 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.137275 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 50 components and 0.137275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067924Jy  sigma=1.345760
! Fit after  self-cal, rms=0.067959Jy  sigma=1.345631
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-38.8, -6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176139 Jy
! Component: 100  -  total flux cleaned = 0.00228995 Jy
! Component: 150  -  total flux cleaned = 0.00238199 Jy
! Component: 200  -  total flux cleaned = 0.0024724 Jy
! Total flux subtracted in 200 components = 0.0024724 Jy
! Clean residual min=-0.001724 max=0.001986 Jy/beam
! Clean residual mean=-0.000003 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.139747 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 67 components and 0.139747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067913Jy  sigma=1.344470
! Fit after  self-cal, rms=0.067909Jy  sigma=1.344370
! Inverting map 
! Added new window around map position (-0.8, -5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193758 Jy
! Component: 100  -  total flux cleaned = 0.00237259 Jy
! Component: 150  -  total flux cleaned = 0.00243494 Jy
! Component: 200  -  total flux cleaned = 0.00251546 Jy
! Total flux subtracted in 200 components = 0.00251546 Jy
! Clean residual min=-0.001684 max=0.001584 Jy/beam
! Clean residual mean=-0.000004 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.142263 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 84 components and 0.142263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067845Jy  sigma=1.342935
! Fit after  self-cal, rms=0.067844Jy  sigma=1.342774
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067844Jy  sigma=1.342774
! Fit after  self-cal, rms=0.067933Jy  sigma=1.342483
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8234 mas, bmaj=2.067 mas, bpa=-0.5551 degrees
! Estimated noise=0.304936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000583523 Jy
! Component: 100  -  total flux cleaned = 0.000661342 Jy
! Component: 150  -  total flux cleaned = 0.000662954 Jy
! Component: 200  -  total flux cleaned = 0.000622286 Jy
! Total flux subtracted in 200 components = 0.000622286 Jy
! Clean residual min=-0.001573 max=0.001574 Jy/beam
! Clean residual mean=-0.000004 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.142885 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 87 components and 0.142885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067912Jy  sigma=1.342043
! Fit after  self-cal, rms=0.067915Jy  sigma=1.341992
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000146366 Jy
! Component: 100  -  total flux cleaned = 0.000110143 Jy
! Component: 150  -  total flux cleaned = 0.000110337 Jy
! Component: 200  -  total flux cleaned = 0.000110403 Jy
! Total flux subtracted in 200 components = 0.000110403 Jy
! Clean residual min=-0.001568 max=0.001587 Jy/beam
! Clean residual mean=-0.000004 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.142995 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 95 components and 0.142995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067905Jy  sigma=1.341797
! Fit after  self-cal, rms=0.067904Jy  sigma=1.341780
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067904Jy  sigma=1.341780
! Fit after  self-cal, rms=0.067915Jy  sigma=1.341699
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.135 mas, bmaj=4.383 mas, bpa=7.282 degrees
! Estimated noise=0.383689 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.66033e-05 Jy
! Component: 100  -  total flux cleaned = -4.92378e-05 Jy
! Component: 150  -  total flux cleaned = -9.09109e-06 Jy
! Component: 200  -  total flux cleaned = 2.70647e-05 Jy
! Total flux subtracted in 200 components = 2.70647e-05 Jy
! Clean residual min=-0.001640 max=0.001756 Jy/beam
! Clean residual mean=-0.000007 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.143022 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 110 components and 0.143022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067912Jy  sigma=1.341654
! Fit after  self-cal, rms=0.067912Jy  sigma=1.341627
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.74474e-05 Jy
! Component: 100  -  total flux cleaned = 0.000112513 Jy
! Component: 150  -  total flux cleaned = 0.00016389 Jy
! Component: 200  -  total flux cleaned = 0.000210852 Jy
! Total flux subtracted in 200 components = 0.000210852 Jy
! Clean residual min=-0.001634 max=0.001725 Jy/beam
! Clean residual mean=-0.000007 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.143233 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 116 components and 0.143233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067911Jy  sigma=1.341628
! Fit after  self-cal, rms=0.067910Jy  sigma=1.341615
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.823 mas, bmaj=2.07 mas, bpa=-0.6763 degrees
! Estimated noise=0.304363 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.823 x 2.07 at -0.6763 degrees (North through East)
! Clean map  min=-0.0013701  max=0.10202 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6391 mas, bmaj=1.689 mas, bpa=-1.241 degrees
! Estimated noise=0.483956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0731752 Jy
! Component: 100  -  total flux cleaned = 0.0974609 Jy
! Component: 150  -  total flux cleaned = 0.111466 Jy
! Component: 200  -  total flux cleaned = 0.120306 Jy
! Total flux subtracted in 200 components = 0.120306 Jy
! Clean residual min=-0.003319 max=0.004769 Jy/beam
! Clean residual mean=0.000000 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.120306 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.120306 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.823 mas, bmaj=2.07 mas, bpa=-0.6763 degrees
! Estimated noise=0.304363 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00848968 Jy
! Component: 100  -  total flux cleaned = 0.0127866 Jy
! Component: 150  -  total flux cleaned = 0.0154232 Jy
! Component: 200  -  total flux cleaned = 0.0172917 Jy
! Total flux subtracted in 200 components = 0.0172917 Jy
! Clean residual min=-0.001761 max=0.001608 Jy/beam
! Clean residual mean=-0.000003 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.137598 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 54 components and 0.137598 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.135 mas, bmaj=4.383 mas, bpa=7.282 degrees
! Estimated noise=0.383689 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185852 Jy
! Component: 100  -  total flux cleaned = 0.00296096 Jy
! Component: 150  -  total flux cleaned = 0.00375475 Jy
! Component: 200  -  total flux cleaned = 0.00433378 Jy
! Total flux subtracted in 200 components = 0.00433378 Jy
! Clean residual min=-0.001712 max=0.001804 Jy/beam
! Clean residual mean=-0.000007 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.141932 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000253773 Jy
! Component: 100  -  total flux cleaned = 0.000472362 Jy
! Component: 150  -  total flux cleaned = 0.000648343 Jy
! Component: 200  -  total flux cleaned = 0.00077896 Jy
! Total flux subtracted in 200 components = 0.00077896 Jy
! Clean residual min=-0.001682 max=0.001773 Jy/beam
! Clean residual mean=-0.000007 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.142711 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 94 components and 0.142711 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.823 mas, bmaj=2.07 mas, bpa=-0.6763 degrees
! Estimated noise=0.304363 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206569 Jy
! Component: 100  -  total flux cleaned = 0.000211932 Jy
! Component: 150  -  total flux cleaned = 0.000131172 Jy
! Component: 200  -  total flux cleaned = 8.51433e-05 Jy
! Total flux subtracted in 200 components = 8.51433e-05 Jy
! Clean residual min=-0.001514 max=0.001546 Jy/beam
! Clean residual mean=-0.000003 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.142796 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 105 components and 0.142796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067925Jy  sigma=1.341851
! Fit after  self-cal, rms=0.067912Jy  sigma=1.341641
wmodel /J1854-1539_X_map.mod
! wmodel: Unable to open new model file: /J1854-1539_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1854-1539_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.823 x 2.07 at -0.6763 degrees (North through East)
! Clean map  min=-0.0013873  max=0.10268 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1854-1539_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.102681 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000379466 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.10868 1.10868 2.21735 4.43471 8.86942 17.7388 35.4777 70.9553
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.102 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  270.592 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1854-1539_X_dfm.log closed on Thu May 19 20:32:44 2016