! Started logfile: /scr/pima/bg219b_uvs/J1852-2433_S_dfm.log on Thu May 19 20:32:29 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219b_uvs/J1852-2433_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J1852-2433_S_uva.fits ! AN table 1: 64 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.63125 visibilities/baseline/integration-bin. ! Found source: J1852-2433 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 7272 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1852-2433_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002692Jy sigma=19.911497 ! Fit after self-cal, rms=0.951547Jy sigma=18.879077 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=6.304 mas, bpa=-4.233 degrees ! Estimated noise=0.579895 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0390947 Jy ! Component: 100 - total flux cleaned = 0.0476575 Jy ! Total flux subtracted in 100 components = 0.0476575 Jy ! Clean residual min=-0.003406 max=0.003282 Jy/beam ! Clean residual mean=-0.000010 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.0476574 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0476574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068884Jy sigma=1.283630 ! Fit after self-cal, rms=0.066726Jy sigma=1.241254 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=7.561 mas, bpa=-5.781 degrees ! Estimated noise=0.450966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00486827 Jy ! Component: 100 - total flux cleaned = 0.00668602 Jy ! Component: 150 - total flux cleaned = 0.00705673 Jy ! Component: 200 - total flux cleaned = 0.00702523 Jy ! Total flux subtracted in 200 components = 0.00702523 Jy ! Clean residual min=-0.002606 max=0.002664 Jy/beam ! Clean residual mean=-0.000001 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0546827 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0546827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066367Jy sigma=1.235328 ! Fit after self-cal, rms=0.066307Jy sigma=1.234493 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.51 x 7.561 at -5.781 degrees (North through East) ! Clean map min=-0.0024748 max=0.053541 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.066307Jy sigma=1.234493 ! Fit after self-cal, rms=0.066307Jy sigma=1.234493 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=7.561 mas, bpa=-5.781 degrees ! Estimated noise=0.450966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000280981 Jy ! Component: 100 - total flux cleaned = 0.000252539 Jy ! Component: 150 - total flux cleaned = 0.000226601 Jy ! Component: 200 - total flux cleaned = 0.000151686 Jy ! Total flux subtracted in 200 components = 0.000151686 Jy ! Clean residual min=-0.002626 max=0.002635 Jy/beam ! Clean residual mean=-0.000002 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0548344 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.0548344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066278Jy sigma=1.234128 ! Fit after self-cal, rms=0.066233Jy sigma=1.233773 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066233Jy sigma=1.233773 ! Fit after self-cal, rms=0.065440Jy sigma=1.232301 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=7.554 mas, bpa=-5.215 degrees ! Estimated noise=0.447959 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217355 Jy ! Component: 100 - total flux cleaned = -0.000296948 Jy ! Component: 150 - total flux cleaned = -0.000349868 Jy ! Component: 200 - total flux cleaned = -0.00038265 Jy ! Total flux subtracted in 200 components = -0.00038265 Jy ! Clean residual min=-0.002376 max=0.002525 Jy/beam ! Clean residual mean=-0.000003 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0544517 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0544517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065427Jy sigma=1.232167 ! Fit after self-cal, rms=0.065395Jy sigma=1.231528 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.78799e-05 Jy ! Component: 100 - total flux cleaned = -2.28562e-05 Jy ! Component: 150 - total flux cleaned = -5.40076e-05 Jy ! Component: 200 - total flux cleaned = -6.89368e-05 Jy ! Total flux subtracted in 200 components = -6.89368e-05 Jy ! Clean residual min=-0.002352 max=0.002528 Jy/beam ! Clean residual mean=-0.000003 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.0543828 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 31 components and 0.0543828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065384Jy sigma=1.231429 ! Fit after self-cal, rms=0.065378Jy sigma=1.231416 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065378Jy sigma=1.231416 ! Fit after self-cal, rms=0.065245Jy sigma=1.230094 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.503 mas, bmaj=7.514 mas, bpa=-5.236 degrees ! Estimated noise=0.447125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406374 Jy ! Component: 100 - total flux cleaned = 0.000390409 Jy ! Component: 150 - total flux cleaned = 0.0003917 Jy ! Component: 200 - total flux cleaned = 0.000378756 Jy ! Total flux subtracted in 200 components = 0.000378756 Jy ! Clean residual min=-0.002229 max=0.002426 Jy/beam ! Clean residual mean=-0.000004 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0547615 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.0547615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065235Jy sigma=1.229973 ! Fit after self-cal, rms=0.065266Jy sigma=1.229718 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.2291e-05 Jy ! Component: 100 - total flux cleaned = -4.47479e-05 Jy ! Component: 150 - total flux cleaned = -5.64724e-05 Jy ! Component: 200 - total flux cleaned = -6.79049e-05 Jy ! Total flux subtracted in 200 components = -6.79049e-05 Jy ! Clean residual min=-0.002244 max=0.002436 Jy/beam ! Clean residual mean=-0.000004 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0546936 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0546936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065260Jy sigma=1.229659 ! Fit after self-cal, rms=0.065254Jy sigma=1.229582 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065254Jy sigma=1.229582 ! Fit after self-cal, rms=0.065333Jy sigma=1.229501 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.36 mas, bmaj=17.02 mas, bpa=1.611 degrees ! Estimated noise=0.556625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142634 Jy ! Component: 100 - total flux cleaned = -0.000177572 Jy ! Component: 150 - total flux cleaned = -0.000226837 Jy ! Component: 200 - total flux cleaned = -0.000257428 Jy ! Total flux subtracted in 200 components = -0.000257428 Jy ! Clean residual min=-0.002343 max=0.002820 Jy/beam ! Clean residual mean=-0.000009 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.0544362 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 42 components and 0.0544362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065327Jy sigma=1.229524 ! Fit after self-cal, rms=0.065312Jy sigma=1.228976 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.70103e-05 Jy ! Component: 100 - total flux cleaned = -9.00596e-05 Jy ! Component: 150 - total flux cleaned = -0.000130074 Jy ! Component: 200 - total flux cleaned = -0.000155738 Jy ! Total flux subtracted in 200 components = -0.000155738 Jy ! Clean residual min=-0.002233 max=0.002785 Jy/beam ! Clean residual mean=-0.000009 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0542805 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.0542805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065310Jy sigma=1.229024 ! Fit after self-cal, rms=0.065307Jy sigma=1.229017 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=7.492 mas, bpa=-5.304 degrees ! Estimated noise=0.446859 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.493 x 7.492 at -5.304 degrees (North through East) ! Clean map min=-0.0021065 max=0.055636 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=6.28 mas, bpa=-3.713 degrees ! Estimated noise=0.566819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0401666 Jy ! Component: 100 - total flux cleaned = 0.049055 Jy ! Component: 150 - total flux cleaned = 0.0523758 Jy ! Component: 200 - total flux cleaned = 0.0542521 Jy ! Total flux subtracted in 200 components = 0.0542521 Jy ! Clean residual min=-0.003079 max=0.003115 Jy/beam ! Clean residual mean=-0.000007 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.0542521 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0542521 Jy ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=7.492 mas, bpa=-5.304 degrees ! Estimated noise=0.446859 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133607 Jy ! Component: 100 - total flux cleaned = 0.00143186 Jy ! Component: 150 - total flux cleaned = 0.0014337 Jy ! Component: 200 - total flux cleaned = 0.0013843 Jy ! Total flux subtracted in 200 components = 0.0013843 Jy ! Clean residual min=-0.002261 max=0.002491 Jy/beam ! Clean residual mean=-0.000003 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.0556364 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.0556364 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.36 mas, bmaj=17.02 mas, bpa=1.611 degrees ! Estimated noise=0.556625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000393093 Jy ! Component: 100 - total flux cleaned = -0.000468845 Jy ! Component: 150 - total flux cleaned = -0.000540122 Jy ! Component: 200 - total flux cleaned = -0.000607812 Jy ! Total flux subtracted in 200 components = -0.000607812 Jy ! Clean residual min=-0.002408 max=0.002911 Jy/beam ! Clean residual mean=-0.000008 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.0550286 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.39732e-05 Jy ! Component: 100 - total flux cleaned = -0.000106261 Jy ! Component: 150 - total flux cleaned = -0.000164859 Jy ! Component: 200 - total flux cleaned = -0.000221361 Jy ! Total flux subtracted in 200 components = -0.000221361 Jy ! Clean residual min=-0.002371 max=0.002881 Jy/beam ! Clean residual mean=-0.000008 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.0548072 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 19 components and 0.0548072 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=7.492 mas, bpa=-5.304 degrees ! Estimated noise=0.446859 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015488 Jy ! Component: 100 - total flux cleaned = 0.000154445 Jy ! Component: 150 - total flux cleaned = 0.00013745 Jy ! Component: 200 - total flux cleaned = 0.000122052 Jy ! Total flux subtracted in 200 components = 0.000122052 Jy ! Clean residual min=-0.002176 max=0.002470 Jy/beam ! Clean residual mean=-0.000004 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0549292 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 21 components and 0.0549293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065317Jy sigma=1.228949 ! Fit after self-cal, rms=0.065320Jy sigma=1.228911 wmodel /J1852-2433_S_map.mod ! wmodel: Unable to open new model file: /J1852-2433_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219b_uvs/J1852-2433_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.493 x 7.492 at -5.304 degrees (North through East) ! Clean map min=-0.0021364 max=0.054826 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1852-2433_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0548259 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000618206 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.38274 3.38274 6.76549 13.531 27.062 54.1239 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.054 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 88.685 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J1852-2433_S_dfm.log closed on Thu May 19 20:32:31 2016