! Started logfile: /scr/pima/bg219b_uvs/J1848+3219_S_dfm.log on Thu May 19 20:32:16 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219b_uvs/J1848+3219_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1848+3219_S_uva.fits
! AN table 1: 9 integrations on 36 of 36 possible baselines.
! AN table 2: 16 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.793333 visibilities/baseline/integration-bin.
! Found source: J1848+3219
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 2856 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1848+3219_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.603422Jy  sigma=26.012103
! Fit after  self-cal, rms=0.297700Jy  sigma=4.759210
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.362 mas, bmaj=4.674 mas, bpa=1.321 degrees
! Estimated noise=1.26093 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.98709 Jy
! Component: 100  -  total flux cleaned = 1.20236 Jy
! Total flux subtracted in 100 components = 1.20236 Jy
! Clean residual min=-0.021109 max=0.060910 Jy/beam
! Clean residual mean=-0.000159 rms=0.006165 Jy/beam
! Combined flux in latest and established models = 1.20236 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 1.20236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121525Jy  sigma=1.921914
! Fit after  self-cal, rms=0.121508Jy  sigma=1.921815
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0590059 Jy
! Component: 100  -  total flux cleaned = 0.0879639 Jy
! Total flux subtracted in 100 components = 0.0879639 Jy
! Clean residual min=-0.012763 max=0.019711 Jy/beam
! Clean residual mean=-0.000050 rms=0.003337 Jy/beam
! Combined flux in latest and established models = 1.29032 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 19 components and 1.29032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081251Jy  sigma=1.270623
! Fit after  self-cal, rms=0.081228Jy  sigma=1.270274
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.169 mas, bmaj=5.489 mas, bpa=0.631 degrees
! Estimated noise=0.992927 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0221742 Jy
! Component: 100  -  total flux cleaned = 0.0343231 Jy
! Component: 150  -  total flux cleaned = 0.0416572 Jy
! Component: 200  -  total flux cleaned = 0.0456716 Jy
! Total flux subtracted in 200 components = 0.0456716 Jy
! Clean residual min=-0.009406 max=0.010637 Jy/beam
! Clean residual mean=0.000015 rms=0.002315 Jy/beam
! Combined flux in latest and established models = 1.33599 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 29 components and 1.33599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074766Jy  sigma=1.166995
! Fit after  self-cal, rms=0.074746Jy  sigma=1.166734
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.169 x 5.489 at 0.631 degrees (North through East)
! Clean map  min=-0.0091343  max=1.2718 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     KP        0.98     LA        1.05     
!   MK        1.01     NL        0.96     OV        0.99     PT        1.00     
!   SC        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        1.00     HN        1.02     KP        0.99     
!   LA        1.00     MK        0.98     NL        0.99     OV        1.01     
!   PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     KP        0.99     LA        1.05     
!   MK        1.03     NL        0.96     OV        1.01     PT        1.00     
!   SC        1.03     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.03     HN        1.05     KP        1.00     
!   LA        1.00     MK        0.99     NL        1.02     OV        1.02     
!   PT        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     KP        0.99     LA        1.02     
!   MK        1.04     NL        0.96     OV        0.96     PT        0.97     
!   SC        1.00     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.01     HN        1.03     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.99     
!   PT        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     KP        0.97     LA        1.02     
!   MK        1.03     NL        1.00     OV        0.98     PT        0.96     
!   SC        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     HN        1.04     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.01     OV        1.01     
!   PT        0.97     
! 
! 
! Fit before self-cal, rms=0.074746Jy  sigma=1.166734
! Fit after  self-cal, rms=0.062840Jy  sigma=0.961873
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.169 mas, bmaj=5.492 mas, bpa=0.5827 degrees
! Estimated noise=0.995004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00262643 Jy
! Component: 100  -  total flux cleaned = -0.00306609 Jy
! Component: 150  -  total flux cleaned = -0.00329909 Jy
! Component: 200  -  total flux cleaned = -0.00358228 Jy
! Total flux subtracted in 200 components = -0.00358228 Jy
! Clean residual min=-0.005448 max=0.004942 Jy/beam
! Clean residual mean=0.000014 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 1.33241 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 1.33241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062585Jy  sigma=0.958523
! Fit after  self-cal, rms=0.062576Jy  sigma=0.958308
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062576Jy  sigma=0.958308
! Fit after  self-cal, rms=0.062525Jy  sigma=0.957848
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.171 mas, bmaj=5.495 mas, bpa=0.6069 degrees
! Estimated noise=0.994847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0019462 Jy
! Component: 100  -  total flux cleaned = -0.00229419 Jy
! Component: 150  -  total flux cleaned = -0.00247711 Jy
! Component: 200  -  total flux cleaned = -0.00264303 Jy
! Total flux subtracted in 200 components = -0.00264303 Jy
! Clean residual min=-0.005159 max=0.004833 Jy/beam
! Clean residual mean=0.000013 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 1.32977 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 40 components and 1.32977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062369Jy  sigma=0.955818
! Fit after  self-cal, rms=0.062362Jy  sigma=0.955701
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000424436 Jy
! Component: 100  -  total flux cleaned = -0.000475716 Jy
! Component: 150  -  total flux cleaned = -0.000520234 Jy
! Component: 200  -  total flux cleaned = -0.000683806 Jy
! Total flux subtracted in 200 components = -0.000683806 Jy
! Clean residual min=-0.004935 max=0.004820 Jy/beam
! Clean residual mean=0.000013 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 1.32908 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 40 components and 1.32908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062289Jy  sigma=0.954752
! Fit after  self-cal, rms=0.062285Jy  sigma=0.954668
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062285Jy  sigma=0.954668
! Fit after  self-cal, rms=0.062252Jy  sigma=0.954191
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.172 mas, bmaj=5.496 mas, bpa=0.6243 degrees
! Estimated noise=0.99491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00126931 Jy
! Component: 100  -  total flux cleaned = -0.0014562 Jy
! Component: 150  -  total flux cleaned = -0.00158008 Jy
! Component: 200  -  total flux cleaned = -0.00169425 Jy
! Total flux subtracted in 200 components = -0.00169425 Jy
! Clean residual min=-0.004779 max=0.004689 Jy/beam
! Clean residual mean=0.000012 rms=0.001074 Jy/beam
! Combined flux in latest and established models = 1.32739 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 42 components and 1.32739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062176Jy  sigma=0.953276
! Fit after  self-cal, rms=0.062176Jy  sigma=0.953224
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000249771 Jy
! Component: 100  -  total flux cleaned = -0.000288681 Jy
! Component: 150  -  total flux cleaned = -0.000352931 Jy
! Component: 200  -  total flux cleaned = -0.000410863 Jy
! Total flux subtracted in 200 components = -0.000410863 Jy
! Clean residual min=-0.004634 max=0.004678 Jy/beam
! Clean residual mean=0.000012 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 1.32698 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 42 components and 1.32698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062140Jy  sigma=0.952783
! Fit after  self-cal, rms=0.062139Jy  sigma=0.952738
! Inverting map 
! Added new window around map position (78.5, -127.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00390885 Jy
! Component: 100  -  total flux cleaned = 0.00533563 Jy
! Component: 150  -  total flux cleaned = 0.00560218 Jy
! Component: 200  -  total flux cleaned = 0.00564701 Jy
! Total flux subtracted in 200 components = 0.00564701 Jy
! Clean residual min=-0.004337 max=0.004143 Jy/beam
! Clean residual mean=0.000004 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 1.33262 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 54 components and 1.33262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061880Jy  sigma=0.948912
! Fit after  self-cal, rms=0.061873Jy  sigma=0.948450
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061873Jy  sigma=0.948450
! Fit after  self-cal, rms=0.061843Jy  sigma=0.947957
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.014 mas, bmaj=9.655 mas, bpa=71.52 degrees
! Estimated noise=1.20213 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137188 Jy
! Component: 100  -  total flux cleaned = 0.00191771 Jy
! Component: 150  -  total flux cleaned = 0.00226856 Jy
! Component: 200  -  total flux cleaned = 0.00239172 Jy
! Total flux subtracted in 200 components = 0.00239172 Jy
! Clean residual min=-0.003741 max=0.004368 Jy/beam
! Clean residual mean=0.000006 rms=0.001112 Jy/beam
! Combined flux in latest and established models = 1.33502 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 62 components and 1.33502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061794Jy  sigma=0.947535
! Fit after  self-cal, rms=0.061790Jy  sigma=0.947300
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000191789 Jy
! Component: 100  -  total flux cleaned = 0.000478046 Jy
! Component: 150  -  total flux cleaned = 0.000619307 Jy
! Component: 200  -  total flux cleaned = 0.00067737 Jy
! Total flux subtracted in 200 components = 0.00067737 Jy
! Clean residual min=-0.003738 max=0.004324 Jy/beam
! Clean residual mean=0.000006 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 1.33569 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 66 components and 1.33569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061793Jy  sigma=0.947401
! Fit after  self-cal, rms=0.061790Jy  sigma=0.947295
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.173 mas, bmaj=5.495 mas, bpa=0.6363 degrees
! Estimated noise=0.994747 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.173 x 5.495 at 0.6363 degrees (North through East)
! Clean map  min=-0.0043062  max=1.2749 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061790Jy  sigma=0.947295
! Fit after  self-cal, rms=0.052720Jy  sigma=0.741703
! Inverting map and beam 
! Estimated beam: bmin=4.172 mas, bmaj=5.496 mas, bpa=0.666 degrees
! Estimated noise=0.994425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00133297 Jy
! Component: 100  -  total flux cleaned = -0.0012862 Jy
! Component: 150  -  total flux cleaned = -0.00115911 Jy
! Component: 200  -  total flux cleaned = -0.00104522 Jy
! Total flux subtracted in 200 components = -0.00104522 Jy
! Clean residual min=-0.003659 max=0.003961 Jy/beam
! Clean residual mean=0.000011 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 1.33465 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 69 components and 1.33465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052620Jy  sigma=0.740196
! Fit after  self-cal, rms=0.052624Jy  sigma=0.740154
! Inverting map 
! Added new window around map position (-34.5, 36.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165699 Jy
! Component: 100  -  total flux cleaned = 0.00144488 Jy
! Component: 150  -  total flux cleaned = 0.00149813 Jy
! Component: 200  -  total flux cleaned = 0.00149756 Jy
! Total flux subtracted in 200 components = 0.00149756 Jy
! Clean residual min=-0.003341 max=0.003272 Jy/beam
! Clean residual mean=0.000010 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 1.33615 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 88 components and 1.33615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052339Jy  sigma=0.736692
! Fit after  self-cal, rms=0.052326Jy  sigma=0.736332
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052326Jy  sigma=0.736332
! Fit after  self-cal, rms=0.052320Jy  sigma=0.735727
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.371 mas, bmaj=4.681 mas, bpa=1.441 degrees
! Estimated noise=1.26292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.988262 Jy
! Component: 100  -  total flux cleaned = 1.20377 Jy
! Component: 150  -  total flux cleaned = 1.26082 Jy
! Component: 200  -  total flux cleaned = 1.28796 Jy
! Total flux subtracted in 200 components = 1.28796 Jy
! Clean residual min=-0.007673 max=0.012749 Jy/beam
! Clean residual mean=-0.000019 rms=0.001964 Jy/beam
! Combined flux in latest and established models = 1.28796 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 1.28796 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.174 mas, bmaj=5.496 mas, bpa=0.6571 degrees
! Estimated noise=0.994213 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181183 Jy
! Component: 100  -  total flux cleaned = 0.0272104 Jy
! Component: 150  -  total flux cleaned = 0.0333125 Jy
! Component: 200  -  total flux cleaned = 0.037946 Jy
! Total flux subtracted in 200 components = 0.037946 Jy
! Clean residual min=-0.004247 max=0.004980 Jy/beam
! Clean residual mean=0.000010 rms=0.001037 Jy/beam
! Combined flux in latest and established models = 1.32591 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 35 components and 1.32591 Jy
! Inverting map 
! Added new window around map position (-3, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00524549 Jy
! Component: 100  -  total flux cleaned = 0.00811648 Jy
! Component: 150  -  total flux cleaned = 0.0099031 Jy
! Component: 200  -  total flux cleaned = 0.0109051 Jy
! Total flux subtracted in 200 components = 0.0109051 Jy
! Clean residual min=-0.003788 max=0.003280 Jy/beam
! Clean residual mean=0.000011 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 1.33681 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 54 components and 1.33681 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.017 mas, bmaj=9.66 mas, bpa=71.55 degrees
! Estimated noise=1.20079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00095289 Jy
! Component: 100  -  total flux cleaned = 0.00118466 Jy
! Component: 150  -  total flux cleaned = 0.0014343 Jy
! Component: 200  -  total flux cleaned = 0.00168719 Jy
! Total flux subtracted in 200 components = 0.00168719 Jy
! Clean residual min=-0.003059 max=0.002728 Jy/beam
! Clean residual mean=0.000018 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 1.3385 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107474 Jy
! Component: 100  -  total flux cleaned = 4.04967e-05 Jy
! Component: 150  -  total flux cleaned = 4.11451e-05 Jy
! Component: 200  -  total flux cleaned = 1.28316e-05 Jy
! Total flux subtracted in 200 components = 1.28316e-05 Jy
! Clean residual min=-0.002993 max=0.002645 Jy/beam
! Clean residual mean=0.000018 rms=0.000877 Jy/beam
! Combined flux in latest and established models = 1.33851 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 94 components and 1.33851 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.174 mas, bmaj=5.496 mas, bpa=0.6571 degrees
! Estimated noise=0.994213 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.23498e-05 Jy
! Component: 100  -  total flux cleaned = 1.44471e-05 Jy
! Component: 150  -  total flux cleaned = 1.41697e-05 Jy
! Component: 200  -  total flux cleaned = 0.000141374 Jy
! Total flux subtracted in 200 components = 0.000141374 Jy
! Clean residual min=-0.003483 max=0.002972 Jy/beam
! Clean residual mean=0.000010 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 1.33865 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 102 components and 1.33865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052360Jy  sigma=0.738011
! Fit after  self-cal, rms=0.052317Jy  sigma=0.737233
wmodel /J1848+3219_S_map.mod
! wmodel: Unable to open new model file: /J1848+3219_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1848+3219_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.174 x 5.496 at 0.6571 degrees (North through East)
! Clean map  min=-0.003279  max=1.2748 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1848+3219_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.27479 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000789914 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.185892 0.185892 0.371784 0.743569 1.48714 2.97428 5.94855 11.8971 23.7942 47.5884 95.1768
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.274 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1613.84 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1848+3219_S_dfm.log closed on Thu May 19 20:32:19 2016