! Started logfile: /scr/pima/bg219b_uvs/J1835+3241_X_uvs.log on Thu Apr  7 02:01:40 2016
obs /scr/pima/bg219b_uvs/J1835+3241_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1835+3241_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.77716 visibilities/baseline/integration-bin.
! Found source: J1835+3241
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15108 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1835+3241_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.009544Jy  sigma=25.818609
! Fit after  self-cal, rms=0.892225Jy  sigma=22.772651
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8012 mas, bmaj=1.361 mas, bpa=-2.231 degrees
! Estimated noise=0.560413 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0798597 Jy
! Component: 100  -  total flux cleaned = 0.112482 Jy
! Total flux subtracted in 100 components = 0.112482 Jy
! Clean residual min=-0.013480 max=0.026074 Jy/beam
! Clean residual mean=-0.000012 rms=0.003474 Jy/beam
! Combined flux in latest and established models = 0.112482 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.112482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.081288Jy  sigma=2.026101
! Fit after  self-cal, rms=0.080495Jy  sigma=2.000563
! Inverting map 
! Added new window around map position (-1.4, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0245367 Jy
! Component: 100  -  total flux cleaned = 0.03845 Jy
! Total flux subtracted in 100 components = 0.03845 Jy
! Clean residual min=-0.008473 max=0.019530 Jy/beam
! Clean residual mean=-0.000006 rms=0.002419 Jy/beam
! Combined flux in latest and established models = 0.150932 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 24 components and 0.150932 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.071562Jy  sigma=1.753873
! Fit after  self-cal, rms=0.068669Jy  sigma=1.676944
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.018223 Jy
! Component: 100  -  total flux cleaned = 0.026278 Jy
! Total flux subtracted in 100 components = 0.026278 Jy
! Clean residual min=-0.007332 max=0.010738 Jy/beam
! Clean residual mean=-0.000003 rms=0.001879 Jy/beam
! Combined flux in latest and established models = 0.17721 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 33 components and 0.17721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063795Jy  sigma=1.540757
! Fit after  self-cal, rms=0.062269Jy  sigma=1.501613
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00787381 Jy
! Component: 100  -  total flux cleaned = 0.00930107 Jy
! Total flux subtracted in 100 components = 0.00930107 Jy
! Clean residual min=-0.006104 max=0.008487 Jy/beam
! Clean residual mean=-0.000001 rms=0.001560 Jy/beam
! Combined flux in latest and established models = 0.186511 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 36 components and 0.186511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060644Jy  sigma=1.457075
! Fit after  self-cal, rms=0.060277Jy  sigma=1.447834
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9971 mas, bmaj=1.601 mas, bpa=-1.849 degrees
! Estimated noise=0.324411 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.2, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0094053 Jy
! Component: 100  -  total flux cleaned = 0.0127793 Jy
! Component: 150  -  total flux cleaned = 0.0152115 Jy
! Component: 200  -  total flux cleaned = 0.017118 Jy
! Total flux subtracted in 200 components = 0.017118 Jy
! Clean residual min=-0.004551 max=0.004808 Jy/beam
! Clean residual mean=-0.000003 rms=0.000966 Jy/beam
! Combined flux in latest and established models = 0.203629 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 59 components and 0.203629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058441Jy  sigma=1.398103
! Fit after  self-cal, rms=0.058281Jy  sigma=1.394360
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9971 x 1.601 at -1.849 degrees (North through East)
! Clean map  min=-0.0045804  max=0.086139 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.18     KP        0.97     
!   LA        0.99     MK        1.03     NL        1.04     OV        0.98     
!   PT        0.95     SC        0.90     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.08     KP        1.02     
!   LA        1.02     MK        1.03     NL        1.09     OV        0.98     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.08     KP        1.05     
!   LA        1.02     MK        1.09     NL        1.08     OV        1.01     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        1.10     KP        1.00     
!   LA        0.99     MK        0.98     NL        1.01     OV        0.97     
!   PT        0.98     SC        0.93     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.01     KP        1.00     
!   LA        1.03     MK        1.12     NL        1.04     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.08     KP        1.06     
!   LA        0.99     MK        1.09     NL        1.05     OV        0.99     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.00     HN        1.12     KP        0.98     
!   LA        1.02     MK        1.03     NL        1.03     OV        1.00     
!   PT        0.98     SC        0.96     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058281Jy  sigma=1.394360
! Fit after  self-cal, rms=0.060267Jy  sigma=1.382974
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=1.618 mas, bpa=-0.2697 degrees
! Estimated noise=0.329966 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.4, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00482551 Jy
! Component: 100  -  total flux cleaned = 0.0067965 Jy
! Component: 150  -  total flux cleaned = 0.00774265 Jy
! Component: 200  -  total flux cleaned = 0.00825963 Jy
! Total flux subtracted in 200 components = 0.00825963 Jy
! Clean residual min=-0.002961 max=0.002598 Jy/beam
! Clean residual mean=0.000000 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.211889 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 83 components and 0.211889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059677Jy  sigma=1.367898
! Fit after  self-cal, rms=0.059661Jy  sigma=1.366976
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059661Jy  sigma=1.366976
! Fit after  self-cal, rms=0.059562Jy  sigma=1.362892
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=1.625 mas, bpa=0.1112 degrees
! Estimated noise=0.330092 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135975 Jy
! Component: 100  -  total flux cleaned = 0.00198843 Jy
! Component: 150  -  total flux cleaned = 0.00231106 Jy
! Component: 200  -  total flux cleaned = 0.0027521 Jy
! Total flux subtracted in 200 components = 0.0027521 Jy
! Clean residual min=-0.002693 max=0.002476 Jy/beam
! Clean residual mean=0.000000 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.214641 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 91 components and 0.214641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059315Jy  sigma=1.357229
! Fit after  self-cal, rms=0.059297Jy  sigma=1.356840
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000410254 Jy
! Component: 100  -  total flux cleaned = 0.000406625 Jy
! Component: 150  -  total flux cleaned = 0.000528031 Jy
! Component: 200  -  total flux cleaned = 0.000698034 Jy
! Total flux subtracted in 200 components = 0.000698034 Jy
! Clean residual min=-0.002444 max=0.002341 Jy/beam
! Clean residual mean=0.000000 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.215339 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 99 components and 0.215339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059159Jy  sigma=1.353770
! Fit after  self-cal, rms=0.059146Jy  sigma=1.353532
! Inverting map 
! Added new window around map position (-28.2, 26.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140158 Jy
! Component: 100  -  total flux cleaned = 0.00133705 Jy
! Component: 150  -  total flux cleaned = 0.00122986 Jy
! Component: 200  -  total flux cleaned = 0.00113148 Jy
! Total flux subtracted in 200 components = 0.00113148 Jy
! Clean residual min=-0.002173 max=0.002288 Jy/beam
! Clean residual mean=-0.000000 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.21647 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 112 components and 0.21647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059018Jy  sigma=1.350581
! Fit after  self-cal, rms=0.059003Jy  sigma=1.350347
! Inverting map 
! Added new window around map position (22.8, -15.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205203 Jy
! Component: 100  -  total flux cleaned = 0.00301211 Jy
! Component: 150  -  total flux cleaned = 0.00319928 Jy
! Component: 200  -  total flux cleaned = 0.00315705 Jy
! Total flux subtracted in 200 components = 0.00315705 Jy
! Clean residual min=-0.001873 max=0.001713 Jy/beam
! Clean residual mean=-0.000000 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.219628 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 124 components and 0.219628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058903Jy  sigma=1.347733
! Fit after  self-cal, rms=0.058895Jy  sigma=1.347615
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058895Jy  sigma=1.347615
! Fit after  self-cal, rms=0.058740Jy  sigma=1.347243
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=1.627 mas, bpa=-0.04824 degrees
! Estimated noise=0.329758 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00038976 Jy
! Component: 100  -  total flux cleaned = 0.000735617 Jy
! Component: 150  -  total flux cleaned = 0.000889262 Jy
! Component: 200  -  total flux cleaned = 0.000888337 Jy
! Total flux subtracted in 200 components = 0.000888337 Jy
! Clean residual min=-0.001759 max=0.001694 Jy/beam
! Clean residual mean=0.000000 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.220516 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 132 components and 0.220516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058686Jy  sigma=1.345908
! Fit after  self-cal, rms=0.058682Jy  sigma=1.345841
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000148594 Jy
! Component: 100  -  total flux cleaned = 0.000148868 Jy
! Component: 150  -  total flux cleaned = 0.000180191 Jy
! Component: 200  -  total flux cleaned = 0.000149934 Jy
! Total flux subtracted in 200 components = 0.000149934 Jy
! Clean residual min=-0.001685 max=0.001681 Jy/beam
! Clean residual mean=0.000000 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.220666 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 138 components and 0.220666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058649Jy  sigma=1.345032
! Fit after  self-cal, rms=0.058646Jy  sigma=1.344998
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058646Jy  sigma=1.344998
! Fit after  self-cal, rms=0.058594Jy  sigma=1.344917
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.404 mas, bmaj=2.649 mas, bpa=41.13 degrees
! Estimated noise=0.403098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195701 Jy
! Component: 100  -  total flux cleaned = 3.44535e-06 Jy
! Component: 150  -  total flux cleaned = 0.000148964 Jy
! Component: 200  -  total flux cleaned = 0.000172232 Jy
! Total flux subtracted in 200 components = 0.000172232 Jy
! Clean residual min=-0.001657 max=0.001726 Jy/beam
! Clean residual mean=0.000001 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.220838 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 153 components and 0.220838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058578Jy  sigma=1.344640
! Fit after  self-cal, rms=0.058578Jy  sigma=1.344605
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.39048e-05 Jy
! Component: 100  -  total flux cleaned = 4.28726e-05 Jy
! Component: 150  -  total flux cleaned = 9.51771e-05 Jy
! Component: 200  -  total flux cleaned = 0.000127795 Jy
! Total flux subtracted in 200 components = 0.000127795 Jy
! Clean residual min=-0.001636 max=0.001717 Jy/beam
! Clean residual mean=0.000002 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.220966 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 169 components and 0.220966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058569Jy  sigma=1.344482
! Fit after  self-cal, rms=0.058568Jy  sigma=1.344460
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=1.627 mas, bpa=-0.1458 degrees
! Estimated noise=0.329475 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.008 x 1.627 at -0.1458 degrees (North through East)
! Clean map  min=-0.0030339  max=0.085241 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8063 mas, bmaj=1.385 mas, bpa=-0.4043 degrees
! Estimated noise=0.575992 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0866964 Jy
! Component: 100  -  total flux cleaned = 0.128277 Jy
! Component: 150  -  total flux cleaned = 0.152064 Jy
! Component: 200  -  total flux cleaned = 0.16644 Jy
! Total flux subtracted in 200 components = 0.16644 Jy
! Clean residual min=-0.006292 max=0.007582 Jy/beam
! Clean residual mean=-0.000005 rms=0.001497 Jy/beam
! Combined flux in latest and established models = 0.16644 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.16644 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=1.627 mas, bpa=-0.1458 degrees
! Estimated noise=0.329475 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123767 Jy
! Component: 100  -  total flux cleaned = 0.0207268 Jy
! Component: 150  -  total flux cleaned = 0.0268672 Jy
! Component: 200  -  total flux cleaned = 0.0317162 Jy
! Total flux subtracted in 200 components = 0.0317162 Jy
! Clean residual min=-0.002917 max=0.003069 Jy/beam
! Clean residual mean=-0.000004 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.198156 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 56 components and 0.198156 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.404 mas, bmaj=2.649 mas, bpa=41.13 degrees
! Estimated noise=0.403098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00629795 Jy
! Component: 100  -  total flux cleaned = 0.0103571 Jy
! Component: 150  -  total flux cleaned = 0.0132424 Jy
! Component: 200  -  total flux cleaned = 0.0155306 Jy
! Total flux subtracted in 200 components = 0.0155306 Jy
! Clean residual min=-0.002307 max=0.002108 Jy/beam
! Clean residual mean=-0.000002 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.213686 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165026 Jy
! Component: 100  -  total flux cleaned = 0.00271659 Jy
! Component: 150  -  total flux cleaned = 0.00367823 Jy
! Component: 200  -  total flux cleaned = 0.00423419 Jy
! Total flux subtracted in 200 components = 0.00423419 Jy
! Clean residual min=-0.001909 max=0.001902 Jy/beam
! Clean residual mean=0.000001 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.217921 Jy
! Adding 89 model components to the UV plane model.
! The established model now contains 133 components and 0.217921 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=1.627 mas, bpa=-0.1458 degrees
! Estimated noise=0.329475 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00053074 Jy
! Component: 100  -  total flux cleaned = 0.00104235 Jy
! Component: 150  -  total flux cleaned = 0.00119343 Jy
! Component: 200  -  total flux cleaned = 0.00128684 Jy
! Total flux subtracted in 200 components = 0.00128684 Jy
! Clean residual min=-0.001899 max=0.001781 Jy/beam
! Clean residual mean=0.000000 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.219207 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 157 components and 0.219207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058706Jy  sigma=1.348150
! Fit after  self-cal, rms=0.058670Jy  sigma=1.347086
wmodel /scr/pima/bg219b_uvs/J1835+3241_X_map.mod
! Writing 157 model components to file: /scr/pima/bg219b_uvs/J1835+3241_X_map.mod
wobs /scr/pima/bg219b_uvs/J1835+3241_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1835+3241_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J1835+3241_X_map.win
! wwins: Wrote 6 windows to /scr/pima/bg219b_uvs/J1835+3241_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000398196 Jy
! Component: 100  -  total flux cleaned = -0.0007584 Jy
! Component: 150  -  total flux cleaned = -0.000872889 Jy
! Component: 200  -  total flux cleaned = -0.000954553 Jy
! Component: 250  -  total flux cleaned = -0.000902165 Jy
! Component: 300  -  total flux cleaned = -0.000851751 Jy
! Component: 350  -  total flux cleaned = -0.00080115 Jy
! Component: 400  -  total flux cleaned = -0.000655462 Jy
! Component: 450  -  total flux cleaned = -0.000584693 Jy
! Component: 500  -  total flux cleaned = -0.000492408 Jy
! Component: 550  -  total flux cleaned = -0.00044704 Jy
! Component: 600  -  total flux cleaned = -0.000358335 Jy
! Component: 650  -  total flux cleaned = -0.000358553 Jy
! Component: 700  -  total flux cleaned = -0.000294668 Jy
! Component: 750  -  total flux cleaned = -0.000231706 Jy
! Component: 800  -  total flux cleaned = -0.000190445 Jy
! Component: 850  -  total flux cleaned = -0.000149978 Jy
! Component: 900  -  total flux cleaned = -7.05714e-05 Jy
! Component: 950  -  total flux cleaned = -3.1588e-05 Jy
! Component: 1000  -  total flux cleaned = 2.59325e-05 Jy
! Component: 1050  -  total flux cleaned = -1.19509e-05 Jy
! Component: 1100  -  total flux cleaned = -3.03228e-05 Jy
! Component: 1150  -  total flux cleaned = -1.15955e-05 Jy
! Component: 1200  -  total flux cleaned = 6.65802e-06 Jy
! Component: 1250  -  total flux cleaned = 6.07843e-06 Jy
! Component: 1300  -  total flux cleaned = -6.43163e-05 Jy
! Component: 1350  -  total flux cleaned = -0.000133425 Jy
! Component: 1400  -  total flux cleaned = -0.000133247 Jy
! Component: 1450  -  total flux cleaned = -0.000167143 Jy
! Component: 1500  -  total flux cleaned = -0.000250546 Jy
! Component: 1550  -  total flux cleaned = -0.000299764 Jy
! Component: 1600  -  total flux cleaned = -0.000332028 Jy
! Component: 1650  -  total flux cleaned = -0.000363834 Jy
! Component: 1700  -  total flux cleaned = -0.000410777 Jy
! Component: 1750  -  total flux cleaned = -0.00037968 Jy
! Component: 1800  -  total flux cleaned = -0.000487236 Jy
! Component: 1850  -  total flux cleaned = -0.000502222 Jy
! Component: 1900  -  total flux cleaned = -0.000547096 Jy
! Component: 1950  -  total flux cleaned = -0.000591625 Jy
! Component: 2000  -  total flux cleaned = -0.000650043 Jy
! Component: 2050  -  total flux cleaned = -0.00067894 Jy
! Component: 2100  -  total flux cleaned = -0.000707599 Jy
! Component: 2150  -  total flux cleaned = -0.000764032 Jy
! Component: 2200  -  total flux cleaned = -0.000764276 Jy
! Component: 2250  -  total flux cleaned = -0.000833375 Jy
! Component: 2300  -  total flux cleaned = -0.000833446 Jy
! Component: 2350  -  total flux cleaned = -0.00090127 Jy
! Component: 2400  -  total flux cleaned = -0.000968217 Jy
! Component: 2450  -  total flux cleaned = -0.00104774 Jy
! Component: 2500  -  total flux cleaned = -0.00106083 Jy
! Component: 2550  -  total flux cleaned = -0.00109995 Jy
! Component: 2600  -  total flux cleaned = -0.00115166 Jy
! Component: 2650  -  total flux cleaned = -0.00121569 Jy
! Component: 2700  -  total flux cleaned = -0.001241 Jy
! Component: 2750  -  total flux cleaned = -0.00125355 Jy
! Component: 2800  -  total flux cleaned = -0.00129096 Jy
! Component: 2850  -  total flux cleaned = -0.00134043 Jy
! Component: 2900  -  total flux cleaned = -0.00136495 Jy
! Component: 2950  -  total flux cleaned = -0.00141351 Jy
! Component: 3000  -  total flux cleaned = -0.00143768 Jy
! Component: 3050  -  total flux cleaned = -0.00147364 Jy
! Component: 3100  -  total flux cleaned = -0.00153326 Jy
! Component: 3150  -  total flux cleaned = -0.0015805 Jy
! Component: 3200  -  total flux cleaned = -0.00159224 Jy
! Component: 3250  -  total flux cleaned = -0.0016389 Jy
! Component: 3300  -  total flux cleaned = -0.00167365 Jy
! Component: 3350  -  total flux cleaned = -0.00175409 Jy
! Component: 3400  -  total flux cleaned = -0.00178842 Jy
! Component: 3450  -  total flux cleaned = -0.00185625 Jy
! Component: 3500  -  total flux cleaned = -0.0019124 Jy
! Component: 3550  -  total flux cleaned = -0.0019236 Jy
! Component: 3600  -  total flux cleaned = -0.00199004 Jy
! Component: 3650  -  total flux cleaned = -0.00205601 Jy
! Component: 3700  -  total flux cleaned = -0.00213237 Jy
! Component: 3750  -  total flux cleaned = -0.00216486 Jy
! Component: 3800  -  total flux cleaned = -0.00221866 Jy
! Component: 3850  -  total flux cleaned = -0.00227215 Jy
! Component: 3900  -  total flux cleaned = -0.00234658 Jy
! Component: 3950  -  total flux cleaned = -0.00241005 Jy
! Component: 4000  -  total flux cleaned = -0.00245212 Jy
! Component: 4050  -  total flux cleaned = -0.00248342 Jy
! Total flux subtracted in 4096 components = -0.00252508 Jy
! Clean residual min=-0.000702 max=0.000624 Jy/beam
! Clean residual mean=-0.000001 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.216682 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 449 components and 0.216682 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1835+3241_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.008 x 1.627 at -0.1458 degrees (North through East)
! Clean map  min=-0.0011638  max=0.081137 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1835+3241_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0811373 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000173534 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.641632 0.641632 1.28326 2.56653 5.13305 10.2661 20.5322 41.0644 82.1289
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.081 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  467.557 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1835+3241_X_uvs.log closed on Thu Apr  7 02:01:45 2016