! Started logfile: /scr/pima/bg219b_uvs/J1835+3241_X_dfm.log on Thu May 19 20:30:53 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1835+3241_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1835+3241_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.77716 visibilities/baseline/integration-bin.
! Found source: J1835+3241
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15108 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1835+3241_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010864Jy  sigma=24.807757
! Fit after  self-cal, rms=0.889508Jy  sigma=21.789807
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7651 mas, bmaj=1.292 mas, bpa=-2.167 degrees
! Estimated noise=0.484116 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0771552 Jy
! Component: 100  -  total flux cleaned = 0.108542 Jy
! Total flux subtracted in 100 components = 0.108542 Jy
! Clean residual min=-0.011879 max=0.024358 Jy/beam
! Clean residual mean=-0.000026 rms=0.003066 Jy/beam
! Combined flux in latest and established models = 0.108542 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.108542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087170Jy  sigma=2.065575
! Fit after  self-cal, rms=0.086371Jy  sigma=2.042573
! Inverting map 
! Added new window around map position (-1.6, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0237149 Jy
! Component: 100  -  total flux cleaned = 0.0379595 Jy
! Total flux subtracted in 100 components = 0.0379595 Jy
! Clean residual min=-0.008125 max=0.019957 Jy/beam
! Clean residual mean=-0.000016 rms=0.002230 Jy/beam
! Combined flux in latest and established models = 0.146501 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 24 components and 0.146501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077275Jy  sigma=1.801468
! Fit after  self-cal, rms=0.074913Jy  sigma=1.740469
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0187392 Jy
! Component: 100  -  total flux cleaned = 0.0274572 Jy
! Total flux subtracted in 100 components = 0.0274572 Jy
! Clean residual min=-0.007140 max=0.011565 Jy/beam
! Clean residual mean=-0.000009 rms=0.001746 Jy/beam
! Combined flux in latest and established models = 0.173958 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 33 components and 0.173958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069701Jy  sigma=1.598697
! Fit after  self-cal, rms=0.067887Jy  sigma=1.553005
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108987 Jy
! Component: 100  -  total flux cleaned = 0.0125104 Jy
! Total flux subtracted in 100 components = 0.0125104 Jy
! Clean residual min=-0.005828 max=0.008119 Jy/beam
! Clean residual mean=-0.000006 rms=0.001427 Jy/beam
! Combined flux in latest and established models = 0.186469 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 36 components and 0.186469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065675Jy  sigma=1.494304
! Fit after  self-cal, rms=0.065189Jy  sigma=1.481857
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9901 mas, bmaj=1.587 mas, bpa=-1.705 degrees
! Estimated noise=0.258898 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.2, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105649 Jy
! Component: 100  -  total flux cleaned = 0.0161784 Jy
! Component: 150  -  total flux cleaned = 0.0187878 Jy
! Component: 200  -  total flux cleaned = 0.0211411 Jy
! Total flux subtracted in 200 components = 0.0211411 Jy
! Clean residual min=-0.004203 max=0.005047 Jy/beam
! Clean residual mean=-0.000006 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.20761 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 58 components and 0.20761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063109Jy  sigma=1.427619
! Fit after  self-cal, rms=0.062936Jy  sigma=1.423440
! Inverting map 
! Added new window around map position (5.4, 3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00536241 Jy
! Component: 100  -  total flux cleaned = 0.00806694 Jy
! Component: 150  -  total flux cleaned = 0.01007 Jy
! Component: 200  -  total flux cleaned = 0.0114589 Jy
! Total flux subtracted in 200 components = 0.0114589 Jy
! Clean residual min=-0.003065 max=0.002782 Jy/beam
! Clean residual mean=-0.000002 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.219069 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 75 components and 0.219069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062250Jy  sigma=1.405549
! Fit after  self-cal, rms=0.062202Jy  sigma=1.404567
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9901 x 1.587 at -1.705 degrees (North through East)
! Clean map  min=-0.0029939  max=0.086944 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.20     KP        0.98     
!   LA        1.00     MK        1.05     NL        1.02     OV        0.99     
!   PT        0.97     SC        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.09     KP        1.03     
!   LA        1.03     MK        1.05     NL        1.07     OV        0.99     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.08     KP        1.06     
!   LA        1.03     MK        1.11     NL        1.06     OV        1.02     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.10     KP        1.01     
!   LA        1.00     MK        0.99     NL        0.99     OV        0.98     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.03     KP        0.98     
!   LA        1.00     MK        1.03     NL        1.05     OV        0.99     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.02     KP        1.01     
!   LA        1.04     MK        1.13     NL        1.02     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.09     KP        1.07     
!   LA        1.00     MK        1.10     NL        1.03     OV        1.00     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.02     HN        1.12     KP        0.99     
!   LA        1.03     MK        1.05     NL        1.01     OV        1.01     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.17     KP        0.99     
!   LA        1.04     MK        1.03     NL        1.02     OV        0.99     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.09     KP        1.00     
!   LA        0.97     MK        1.03     NL        0.98     OV        0.96     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.93     HN        1.01     KP        0.97     
!   LA        0.97     MK        0.93     NL        1.06     OV        1.00     
!   PT        0.98     SC        0.84     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.91     HN        1.01     KP        1.02     
!   LA        0.97     MK        0.98     NL        0.93     OV        0.94     
!   PT        0.94     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.062202Jy  sigma=1.404567
! Fit after  self-cal, rms=0.063170Jy  sigma=1.391513
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.994 mas, bmaj=1.599 mas, bpa=-0.294 degrees
! Estimated noise=0.261415 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146594 Jy
! Component: 100  -  total flux cleaned = 0.00183671 Jy
! Component: 150  -  total flux cleaned = 0.00207742 Jy
! Component: 200  -  total flux cleaned = 0.00244228 Jy
! Total flux subtracted in 200 components = 0.00244228 Jy
! Clean residual min=-0.002176 max=0.002266 Jy/beam
! Clean residual mean=-0.000000 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.221511 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 86 components and 0.221511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062930Jy  sigma=1.385888
! Fit after  self-cal, rms=0.062922Jy  sigma=1.385183
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062922Jy  sigma=1.385183
! Fit after  self-cal, rms=0.062864Jy  sigma=1.381512
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9923 mas, bmaj=1.602 mas, bpa=-0.08812 degrees
! Estimated noise=0.261092 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000356875 Jy
! Component: 100  -  total flux cleaned = 0.000555531 Jy
! Component: 150  -  total flux cleaned = 0.000903744 Jy
! Component: 200  -  total flux cleaned = 0.00111546 Jy
! Total flux subtracted in 200 components = 0.00111546 Jy
! Clean residual min=-0.001826 max=0.002093 Jy/beam
! Clean residual mean=-0.000000 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.222627 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 96 components and 0.222627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062736Jy  sigma=1.378773
! Fit after  self-cal, rms=0.062726Jy  sigma=1.378512
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-24.2, 27.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174029 Jy
! Component: 100  -  total flux cleaned = 0.00200555 Jy
! Component: 150  -  total flux cleaned = 0.002324 Jy
! Component: 200  -  total flux cleaned = 0.00261097 Jy
! Total flux subtracted in 200 components = 0.00261097 Jy
! Clean residual min=-0.001648 max=0.001938 Jy/beam
! Clean residual mean=0.000000 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.225238 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 105 components and 0.225238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062628Jy  sigma=1.376471
! Fit after  self-cal, rms=0.062614Jy  sigma=1.376276
! Inverting map 
! Added new window around map position (-10, -4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000862011 Jy
! Component: 100  -  total flux cleaned = 0.00085868 Jy
! Component: 150  -  total flux cleaned = 0.000946274 Jy
! Component: 200  -  total flux cleaned = 0.00110488 Jy
! Total flux subtracted in 200 components = 0.00110488 Jy
! Clean residual min=-0.001615 max=0.001811 Jy/beam
! Clean residual mean=0.000001 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.226343 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 123 components and 0.226343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062535Jy  sigma=1.374210
! Fit after  self-cal, rms=0.062527Jy  sigma=1.374106
! Inverting map 
! Added new window around map position (17.8, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174106 Jy
! Component: 100  -  total flux cleaned = 0.00261613 Jy
! Component: 150  -  total flux cleaned = 0.00318781 Jy
! Component: 200  -  total flux cleaned = 0.00364861 Jy
! Total flux subtracted in 200 components = 0.00364861 Jy
! Clean residual min=-0.001531 max=0.001506 Jy/beam
! Clean residual mean=0.000002 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.229991 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 140 components and 0.229991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062460Jy  sigma=1.372448
! Fit after  self-cal, rms=0.062454Jy  sigma=1.372358
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062454Jy  sigma=1.372358
! Fit after  self-cal, rms=0.062339Jy  sigma=1.372192
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9916 mas, bmaj=1.602 mas, bpa=-0.2353 degrees
! Estimated noise=0.26054 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00052656 Jy
! Component: 100  -  total flux cleaned = 0.00104166 Jy
! Component: 150  -  total flux cleaned = 0.00142566 Jy
! Component: 200  -  total flux cleaned = 0.00172801 Jy
! Total flux subtracted in 200 components = 0.00172801 Jy
! Clean residual min=-0.001532 max=0.001360 Jy/beam
! Clean residual mean=0.000002 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.231719 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 150 components and 0.231719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062305Jy  sigma=1.371399
! Fit after  self-cal, rms=0.062304Jy  sigma=1.371368
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000396176 Jy
! Component: 100  -  total flux cleaned = 0.000623654 Jy
! Component: 150  -  total flux cleaned = 0.000785759 Jy
! Component: 200  -  total flux cleaned = 0.000941923 Jy
! Total flux subtracted in 200 components = 0.000941923 Jy
! Clean residual min=-0.001498 max=0.001296 Jy/beam
! Clean residual mean=0.000002 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.232661 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 161 components and 0.232661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062282Jy  sigma=1.370837
! Fit after  self-cal, rms=0.062280Jy  sigma=1.370817
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062280Jy  sigma=1.370817
! Fit after  self-cal, rms=0.062184Jy  sigma=1.370779
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.398 mas, bmaj=2.64 mas, bpa=41.9 degrees
! Estimated noise=0.320817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000640863 Jy
! Component: 100  -  total flux cleaned = 0.000944374 Jy
! Component: 150  -  total flux cleaned = 0.00113014 Jy
! Component: 200  -  total flux cleaned = 0.00131617 Jy
! Total flux subtracted in 200 components = 0.00131617 Jy
! Clean residual min=-0.001524 max=0.001647 Jy/beam
! Clean residual mean=0.000005 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.233977 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 187 components and 0.233977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062172Jy  sigma=1.370575
! Fit after  self-cal, rms=0.062171Jy  sigma=1.370558
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000239219 Jy
! Component: 100  -  total flux cleaned = 0.000359046 Jy
! Component: 150  -  total flux cleaned = 0.00045431 Jy
! Component: 200  -  total flux cleaned = 0.000558609 Jy
! Total flux subtracted in 200 components = 0.000558609 Jy
! Clean residual min=-0.001513 max=0.001629 Jy/beam
! Clean residual mean=0.000006 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.234536 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 200 components and 0.234536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062162Jy  sigma=1.370407
! Fit after  self-cal, rms=0.062161Jy  sigma=1.370394
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9911 mas, bmaj=1.6 mas, bpa=-0.3606 degrees
! Estimated noise=0.260157 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9911 x 1.6 at -0.3606 degrees (North through East)
! Clean map  min=-0.0033081  max=0.085625 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7621 mas, bmaj=1.308 mas, bpa=-0.5887 degrees
! Estimated noise=0.487887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0825693 Jy
! Component: 100  -  total flux cleaned = 0.123227 Jy
! Component: 150  -  total flux cleaned = 0.147626 Jy
! Component: 200  -  total flux cleaned = 0.162841 Jy
! Total flux subtracted in 200 components = 0.162841 Jy
! Clean residual min=-0.004962 max=0.008098 Jy/beam
! Clean residual mean=-0.000014 rms=0.001344 Jy/beam
! Combined flux in latest and established models = 0.162841 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.162841 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9911 mas, bmaj=1.6 mas, bpa=-0.3606 degrees
! Estimated noise=0.260157 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149125 Jy
! Component: 100  -  total flux cleaned = 0.0246386 Jy
! Component: 150  -  total flux cleaned = 0.031576 Jy
! Component: 200  -  total flux cleaned = 0.0369539 Jy
! Total flux subtracted in 200 components = 0.0369539 Jy
! Clean residual min=-0.002680 max=0.003592 Jy/beam
! Clean residual mean=-0.000008 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.199795 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 65 components and 0.199795 Jy
! Inverting map 
! Added new window around map position (0.4, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00437246 Jy
! Component: 100  -  total flux cleaned = 0.0079045 Jy
! Component: 150  -  total flux cleaned = 0.0108463 Jy
! Component: 200  -  total flux cleaned = 0.0133963 Jy
! Total flux subtracted in 200 components = 0.0133963 Jy
! Clean residual min=-0.002234 max=0.002039 Jy/beam
! Clean residual mean=-0.000004 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.213191 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 94 components and 0.213191 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.398 mas, bmaj=2.64 mas, bpa=41.9 degrees
! Estimated noise=0.320817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359461 Jy
! Component: 100  -  total flux cleaned = 0.00626026 Jy
! Component: 150  -  total flux cleaned = 0.0084205 Jy
! Component: 200  -  total flux cleaned = 0.010239 Jy
! Total flux subtracted in 200 components = 0.010239 Jy
! Clean residual min=-0.002196 max=0.001896 Jy/beam
! Clean residual mean=-0.000002 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.22343 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155962 Jy
! Component: 100  -  total flux cleaned = 0.00292225 Jy
! Component: 150  -  total flux cleaned = 0.00412128 Jy
! Component: 200  -  total flux cleaned = 0.00518232 Jy
! Total flux subtracted in 200 components = 0.00518232 Jy
! Clean residual min=-0.001959 max=0.001695 Jy/beam
! Clean residual mean=0.000002 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.228612 Jy
! Adding 110 model components to the UV plane model.
! The established model now contains 182 components and 0.228612 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9911 mas, bmaj=1.6 mas, bpa=-0.3606 degrees
! Estimated noise=0.260157 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.41493e-05 Jy
! Component: 100  -  total flux cleaned = 0.000594189 Jy
! Component: 150  -  total flux cleaned = 0.00110386 Jy
! Component: 200  -  total flux cleaned = 0.00148913 Jy
! Total flux subtracted in 200 components = 0.00148913 Jy
! Clean residual min=-0.001643 max=0.001570 Jy/beam
! Clean residual mean=0.000002 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.230101 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 213 components and 0.230101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062276Jy  sigma=1.373525
! Fit after  self-cal, rms=0.062248Jy  sigma=1.372732
wmodel /J1835+3241_X_map.mod
! wmodel: Unable to open new model file: /J1835+3241_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1835+3241_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9911 x 1.6 at -0.3606 degrees (North through East)
! Clean map  min=-0.0014905  max=0.0815 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1835+3241_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0815002 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000366095 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.34759 1.34759 2.69517 5.39034 10.7807 21.5614 43.1227 86.2455
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.081 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  222.62 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1835+3241_X_dfm.log closed on Thu May 19 20:30:57 2016