! Started logfile: /scr/pima/bg219b_uvs/J1829+4844_X_uvs.log on Thu Apr  7 02:01:29 2016
obs /scr/pima/bg219b_uvs/J1829+4844_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1829+4844_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.897531 visibilities/baseline/integration-bin.
! Found source: J1829+4844
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17448 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1829+4844_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.578106Jy  sigma=26.206640
! Fit after  self-cal, rms=0.351809Jy  sigma=5.725839
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7695 mas, bmaj=1.115 mas, bpa=0.6614 degrees
! Estimated noise=0.786442 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.864824 Jy
! Component: 100  -  total flux cleaned = 1.12547 Jy
! Total flux subtracted in 100 components = 1.12547 Jy
! Clean residual min=-0.048568 max=0.102472 Jy/beam
! Clean residual mean=-0.000046 rms=0.011753 Jy/beam
! Combined flux in latest and established models = 1.12547 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 1.12547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.262698Jy  sigma=4.120897
! Fit after  self-cal, rms=0.260917Jy  sigma=4.092630
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107872 Jy
! Component: 100  -  total flux cleaned = 0.16003 Jy
! Total flux subtracted in 100 components = 0.16003 Jy
! Clean residual min=-0.037685 max=0.074618 Jy/beam
! Clean residual mean=-0.000040 rms=0.008287 Jy/beam
! Combined flux in latest and established models = 1.2855 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 15 components and 1.2855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.193327Jy  sigma=3.009584
! Fit after  self-cal, rms=0.192355Jy  sigma=2.994739
! Inverting map 
! Added new window around map position (-1.2, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0716942 Jy
! Component: 100  -  total flux cleaned = 0.11159 Jy
! Total flux subtracted in 100 components = 0.11159 Jy
! Clean residual min=-0.029378 max=0.040517 Jy/beam
! Clean residual mean=-0.000035 rms=0.006096 Jy/beam
! Combined flux in latest and established models = 1.39709 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 27 components and 1.39709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.150907Jy  sigma=2.347469
! Fit after  self-cal, rms=0.146590Jy  sigma=2.269914
! Inverting map 
! Added new window around map position (-2.2, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0401124 Jy
! Component: 100  -  total flux cleaned = 0.065134 Jy
! Total flux subtracted in 100 components = 0.065134 Jy
! Clean residual min=-0.022588 max=0.033268 Jy/beam
! Clean residual mean=-0.000030 rms=0.004765 Jy/beam
! Combined flux in latest and established models = 1.46223 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 33 components and 1.46223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.130211Jy  sigma=2.020615
! Fit after  self-cal, rms=0.128851Jy  sigma=1.998204
! Inverting map 
! Added new window around map position (-4.4, 7.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0308243 Jy
! Component: 100  -  total flux cleaned = 0.0517679 Jy
! Total flux subtracted in 100 components = 0.0517679 Jy
! Clean residual min=-0.018146 max=0.021883 Jy/beam
! Clean residual mean=-0.000025 rms=0.003962 Jy/beam
! Combined flux in latest and established models = 1.514 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 41 components and 1.514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.116052Jy  sigma=1.810100
! Fit after  self-cal, rms=0.115247Jy  sigma=1.800907
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9408 mas, bmaj=1.346 mas, bpa=1.891 degrees
! Estimated noise=0.457398 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0278847 Jy
! Component: 100  -  total flux cleaned = 0.0478147 Jy
! Component: 150  -  total flux cleaned = 0.0635594 Jy
! Component: 200  -  total flux cleaned = 0.0765407 Jy
! Total flux subtracted in 200 components = 0.0765407 Jy
! Clean residual min=-0.016346 max=0.020406 Jy/beam
! Clean residual mean=-0.000029 rms=0.004171 Jy/beam
! Combined flux in latest and established models = 1.59054 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 61 components and 1.59054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.103269Jy  sigma=1.642327
! Fit after  self-cal, rms=0.102483Jy  sigma=1.629381
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9408 x 1.346 at 1.891 degrees (North through East)
! Clean map  min=-0.016887  max=1.1157 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.04     KP        0.97     
!   LA        0.96     MK        0.97     NL        1.00     OV        0.96     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.04     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.06     KP        1.05     
!   LA        0.99     MK        1.00     NL        1.04     OV        1.00     
!   PT        0.97     SC        1.07     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        1.00     
!   LA        0.96     MK        0.98     NL        0.99     OV        0.95     
!   PT        0.95     SC        1.03     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.96     MK        1.01     NL        1.02     OV        0.97     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.03     KP        1.04     
!   LA        0.97     MK        1.02     NL        1.02     OV        1.00     
!   PT        0.98     SC        1.09     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.94     MK        1.00     NL        0.99     OV        0.95     
!   PT        0.95     SC        1.04     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.102483Jy  sigma=1.629381
! Fit after  self-cal, rms=0.086426Jy  sigma=1.329603
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9523 mas, bmaj=1.357 mas, bpa=0.7183 degrees
! Estimated noise=0.458968 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.6, 6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154246 Jy
! Component: 100  -  total flux cleaned = 0.0218826 Jy
! Component: 150  -  total flux cleaned = 0.0287609 Jy
! Component: 200  -  total flux cleaned = 0.0345609 Jy
! Total flux subtracted in 200 components = 0.0345609 Jy
! Clean residual min=-0.010754 max=0.016177 Jy/beam
! Clean residual mean=-0.000008 rms=0.002930 Jy/beam
! Combined flux in latest and established models = 1.6251 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 78 components and 1.6251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.081237Jy  sigma=1.251726
! Fit after  self-cal, rms=0.080756Jy  sigma=1.245181
! Inverting map 
! Added new window around map position (-8.2, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147543 Jy
! Component: 100  -  total flux cleaned = 0.0237905 Jy
! Component: 150  -  total flux cleaned = 0.0307152 Jy
! Component: 200  -  total flux cleaned = 0.0362505 Jy
! Total flux subtracted in 200 components = 0.0362505 Jy
! Clean residual min=-0.008975 max=0.010986 Jy/beam
! Clean residual mean=-0.000007 rms=0.002506 Jy/beam
! Combined flux in latest and established models = 1.66135 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 115 components and 1.66135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.076407Jy  sigma=1.190438
! Fit after  self-cal, rms=0.075902Jy  sigma=1.184957
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075902Jy  sigma=1.184957
! Fit after  self-cal, rms=0.075230Jy  sigma=1.162677
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9524 mas, bmaj=1.356 mas, bpa=1.091 degrees
! Estimated noise=0.459063 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00760048 Jy
! Component: 100  -  total flux cleaned = 0.0128925 Jy
! Component: 150  -  total flux cleaned = 0.0169131 Jy
! Component: 200  -  total flux cleaned = 0.0205141 Jy
! Total flux subtracted in 200 components = 0.0205141 Jy
! Clean residual min=-0.007994 max=0.009376 Jy/beam
! Clean residual mean=-0.000004 rms=0.002255 Jy/beam
! Combined flux in latest and established models = 1.68186 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 128 components and 1.68186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.073381Jy  sigma=1.141356
! Fit after  self-cal, rms=0.073191Jy  sigma=1.140067
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00316806 Jy
! Component: 100  -  total flux cleaned = 0.00652816 Jy
! Component: 150  -  total flux cleaned = 0.00959667 Jy
! Component: 200  -  total flux cleaned = 0.0125527 Jy
! Total flux subtracted in 200 components = 0.0125527 Jy
! Clean residual min=-0.007677 max=0.009290 Jy/beam
! Clean residual mean=-0.000003 rms=0.002183 Jy/beam
! Combined flux in latest and established models = 1.69441 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 140 components and 1.69441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072285Jy  sigma=1.130125
! Fit after  self-cal, rms=0.072176Jy  sigma=1.129580
! Inverting map 
! Added new window around map position (-12, 9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100085 Jy
! Component: 100  -  total flux cleaned = 0.0168791 Jy
! Component: 150  -  total flux cleaned = 0.0220909 Jy
! Component: 200  -  total flux cleaned = 0.0265489 Jy
! Total flux subtracted in 200 components = 0.0265489 Jy
! Clean residual min=-0.007307 max=0.007830 Jy/beam
! Clean residual mean=-0.000003 rms=0.001903 Jy/beam
! Combined flux in latest and established models = 1.72096 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 170 components and 1.72096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069962Jy  sigma=1.099770
! Fit after  self-cal, rms=0.069700Jy  sigma=1.097466
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069700Jy  sigma=1.097466
! Fit after  self-cal, rms=0.069215Jy  sigma=1.091414
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9526 mas, bmaj=1.356 mas, bpa=1.123 degrees
! Estimated noise=0.459029 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00578848 Jy
! Component: 100  -  total flux cleaned = 0.00970675 Jy
! Component: 150  -  total flux cleaned = 0.0134054 Jy
! Component: 200  -  total flux cleaned = 0.0168068 Jy
! Total flux subtracted in 200 components = 0.0168068 Jy
! Clean residual min=-0.006367 max=0.007511 Jy/beam
! Clean residual mean=-0.000002 rms=0.001751 Jy/beam
! Combined flux in latest and established models = 1.73777 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 176 components and 1.73777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068171Jy  sigma=1.078031
! Fit after  self-cal, rms=0.068062Jy  sigma=1.077316
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.8, 41.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00772397 Jy
! Component: 100  -  total flux cleaned = 0.0128658 Jy
! Component: 150  -  total flux cleaned = 0.0171234 Jy
! Component: 200  -  total flux cleaned = 0.0209918 Jy
! Total flux subtracted in 200 components = 0.0209918 Jy
! Clean residual min=-0.006061 max=0.006760 Jy/beam
! Clean residual mean=-0.000002 rms=0.001545 Jy/beam
! Combined flux in latest and established models = 1.75876 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 210 components and 1.75876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.066634Jy  sigma=1.057911
! Fit after  self-cal, rms=0.066405Jy  sigma=1.056691
! Inverting map 
! Added new window around map position (-9.4, 9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00641937 Jy
! Component: 100  -  total flux cleaned = 0.0106238 Jy
! Component: 150  -  total flux cleaned = 0.0143611 Jy
! Component: 200  -  total flux cleaned = 0.0177945 Jy
! Total flux subtracted in 200 components = 0.0177945 Jy
! Clean residual min=-0.005456 max=0.005925 Jy/beam
! Clean residual mean=-0.000001 rms=0.001388 Jy/beam
! Combined flux in latest and established models = 1.77656 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 241 components and 1.77656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065369Jy  sigma=1.042277
! Fit after  self-cal, rms=0.065230Jy  sigma=1.041560
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065230Jy  sigma=1.041560
! Fit after  self-cal, rms=0.064898Jy  sigma=1.039174
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.099 mas, bmaj=2.325 mas, bpa=-4.412 degrees
! Estimated noise=0.620175 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00822 Jy
! Component: 100  -  total flux cleaned = 0.0148132 Jy
! Component: 150  -  total flux cleaned = 0.0204613 Jy
! Component: 200  -  total flux cleaned = 0.0253752 Jy
! Total flux subtracted in 200 components = 0.0253752 Jy
! Clean residual min=-0.007495 max=0.008198 Jy/beam
! Clean residual mean=-0.000001 rms=0.002270 Jy/beam
! Combined flux in latest and established models = 1.80193 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 269 components and 1.80193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064144Jy  sigma=1.030841
! Fit after  self-cal, rms=0.063979Jy  sigma=1.029830
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00481734 Jy
! Component: 100  -  total flux cleaned = 0.00896301 Jy
! Component: 150  -  total flux cleaned = 0.0126211 Jy
! Component: 200  -  total flux cleaned = 0.0159008 Jy
! Total flux subtracted in 200 components = 0.0159008 Jy
! Clean residual min=-0.007248 max=0.007281 Jy/beam
! Clean residual mean=0.000001 rms=0.002091 Jy/beam
! Combined flux in latest and established models = 1.81783 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 288 components and 1.81783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063711Jy  sigma=1.027259
! Fit after  self-cal, rms=0.063653Jy  sigma=1.026943
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9533 mas, bmaj=1.356 mas, bpa=1.116 degrees
! Estimated noise=0.458999 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9533 x 1.356 at 1.116 degrees (North through East)
! Clean map  min=-0.0047777  max=1.1178 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063653Jy  sigma=1.026943
! Fit after  self-cal, rms=0.059957Jy  sigma=0.930487
! Inverting map and beam 
! Estimated beam: bmin=0.9535 mas, bmaj=1.357 mas, bpa=1.133 degrees
! Estimated noise=0.45843 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140985 Jy
! Component: 100  -  total flux cleaned = 0.0032022 Jy
! Component: 150  -  total flux cleaned = 0.00492129 Jy
! Component: 200  -  total flux cleaned = 0.00624408 Jy
! Total flux subtracted in 200 components = 0.00624408 Jy
! Clean residual min=-0.004858 max=0.004464 Jy/beam
! Clean residual mean=0.000000 rms=0.001124 Jy/beam
! Combined flux in latest and established models = 1.82408 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 307 components and 1.82408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059614Jy  sigma=0.925171
! Fit after  self-cal, rms=0.059577Jy  sigma=0.924963
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113098 Jy
! Component: 100  -  total flux cleaned = 0.00259695 Jy
! Component: 150  -  total flux cleaned = 0.00397787 Jy
! Component: 200  -  total flux cleaned = 0.00514381 Jy
! Total flux subtracted in 200 components = 0.00514381 Jy
! Clean residual min=-0.004861 max=0.004340 Jy/beam
! Clean residual mean=0.000000 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 1.82922 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 315 components and 1.82922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059373Jy  sigma=0.921977
! Fit after  self-cal, rms=0.059347Jy  sigma=0.921874
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059347Jy  sigma=0.921874
! Fit after  self-cal, rms=0.059268Jy  sigma=0.921328
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7802 mas, bmaj=1.125 mas, bpa=-0.5163 degrees
! Estimated noise=0.775878 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.866217 Jy
! Component: 100  -  total flux cleaned = 1.13672 Jy
! Component: 150  -  total flux cleaned = 1.26343 Jy
! Component: 200  -  total flux cleaned = 1.33535 Jy
! Total flux subtracted in 200 components = 1.33535 Jy
! Clean residual min=-0.023335 max=0.038446 Jy/beam
! Clean residual mean=-0.000024 rms=0.005932 Jy/beam
! Combined flux in latest and established models = 1.33535 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 1.33535 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.954 mas, bmaj=1.357 mas, bpa=1.113 degrees
! Estimated noise=0.458297 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0629778 Jy
! Component: 100  -  total flux cleaned = 0.108678 Jy
! Component: 150  -  total flux cleaned = 0.14387 Jy
! Component: 200  -  total flux cleaned = 0.172508 Jy
! Total flux subtracted in 200 components = 0.172508 Jy
! Clean residual min=-0.013810 max=0.019106 Jy/beam
! Clean residual mean=-0.000021 rms=0.004186 Jy/beam
! Combined flux in latest and established models = 1.50786 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 45 components and 1.50786 Jy
! Inverting map 
! Added new window around map position (-3.2, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0240912 Jy
! Component: 100  -  total flux cleaned = 0.04442 Jy
! Component: 150  -  total flux cleaned = 0.0620431 Jy
! Component: 200  -  total flux cleaned = 0.0775295 Jy
! Total flux subtracted in 200 components = 0.0775295 Jy
! Clean residual min=-0.010307 max=0.010762 Jy/beam
! Clean residual mean=-0.000014 rms=0.003051 Jy/beam
! Combined flux in latest and established models = 1.58539 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 81 components and 1.58539 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.1 mas, bmaj=2.325 mas, bpa=-4.495 degrees
! Estimated noise=0.618639 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0280214 Jy
! Component: 100  -  total flux cleaned = 0.0507175 Jy
! Component: 150  -  total flux cleaned = 0.0701291 Jy
! Component: 200  -  total flux cleaned = 0.087108 Jy
! Total flux subtracted in 200 components = 0.087108 Jy
! Clean residual min=-0.012715 max=0.013334 Jy/beam
! Clean residual mean=-0.000021 rms=0.004522 Jy/beam
! Combined flux in latest and established models = 1.6725 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0150785 Jy
! Component: 100  -  total flux cleaned = 0.0285634 Jy
! Component: 150  -  total flux cleaned = 0.0406931 Jy
! Component: 200  -  total flux cleaned = 0.0516511 Jy
! Total flux subtracted in 200 components = 0.0516511 Jy
! Clean residual min=-0.009841 max=0.009821 Jy/beam
! Clean residual mean=-0.000013 rms=0.003383 Jy/beam
! Combined flux in latest and established models = 1.72415 Jy
! Adding 144 model components to the UV plane model.
! The established model now contains 210 components and 1.72415 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.954 mas, bmaj=1.357 mas, bpa=1.113 degrees
! Estimated noise=0.458297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00907024 Jy
! Component: 100  -  total flux cleaned = 0.016201 Jy
! Component: 150  -  total flux cleaned = 0.0224609 Jy
! Component: 200  -  total flux cleaned = 0.0281399 Jy
! Total flux subtracted in 200 components = 0.0281399 Jy
! Clean residual min=-0.005643 max=0.006787 Jy/beam
! Clean residual mean=-0.000002 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 1.75229 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 238 components and 1.75229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061943Jy  sigma=0.964095
! Fit after  self-cal, rms=0.061476Jy  sigma=0.950785
wmodel /scr/pima/bg219b_uvs/J1829+4844_X_map.mod
! Writing 238 model components to file: /scr/pima/bg219b_uvs/J1829+4844_X_map.mod
wobs /scr/pima/bg219b_uvs/J1829+4844_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1829+4844_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J1829+4844_X_map.win
! wwins: Wrote 10 windows to /scr/pima/bg219b_uvs/J1829+4844_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208164 Jy
! Component: 100  -  total flux cleaned = 0.00303296 Jy
! Component: 150  -  total flux cleaned = 0.00339182 Jy
! Component: 200  -  total flux cleaned = 0.00355869 Jy
! Component: 250  -  total flux cleaned = 0.00347411 Jy
! Component: 300  -  total flux cleaned = 0.00355332 Jy
! Component: 350  -  total flux cleaned = 0.00378413 Jy
! Component: 400  -  total flux cleaned = 0.00378321 Jy
! Component: 450  -  total flux cleaned = 0.0037098 Jy
! Component: 500  -  total flux cleaned = 0.0034968 Jy
! Component: 550  -  total flux cleaned = 0.00342775 Jy
! Component: 600  -  total flux cleaned = 0.00322517 Jy
! Component: 650  -  total flux cleaned = 0.00315942 Jy
! Component: 700  -  total flux cleaned = 0.00284029 Jy
! Component: 750  -  total flux cleaned = 0.00265346 Jy
! Component: 800  -  total flux cleaned = 0.00253193 Jy
! Component: 850  -  total flux cleaned = 0.00241153 Jy
! Component: 900  -  total flux cleaned = 0.00217685 Jy
! Component: 950  -  total flux cleaned = 0.00206172 Jy
! Component: 1000  -  total flux cleaned = 0.00194776 Jy
! Component: 1050  -  total flux cleaned = 0.00161517 Jy
! Component: 1100  -  total flux cleaned = 0.00139658 Jy
! Component: 1150  -  total flux cleaned = 0.00118233 Jy
! Component: 1200  -  total flux cleaned = 0.000815243 Jy
! Component: 1250  -  total flux cleaned = 0.000764528 Jy
! Component: 1300  -  total flux cleaned = 0.000611416 Jy
! Component: 1350  -  total flux cleaned = 0.000411673 Jy
! Component: 1400  -  total flux cleaned = 0.000166272 Jy
! Component: 1450  -  total flux cleaned = 2.01507e-05 Jy
! Component: 1500  -  total flux cleaned = -0.000122178 Jy
! Component: 1550  -  total flux cleaned = -0.000356065 Jy
! Component: 1600  -  total flux cleaned = -0.00035675 Jy
! Component: 1650  -  total flux cleaned = -0.000539637 Jy
! Component: 1700  -  total flux cleaned = -0.000807967 Jy
! Component: 1750  -  total flux cleaned = -0.00107375 Jy
! Component: 1800  -  total flux cleaned = -0.00129063 Jy
! Component: 1850  -  total flux cleaned = -0.00154668 Jy
! Component: 1900  -  total flux cleaned = -0.00179938 Jy
! Component: 1950  -  total flux cleaned = -0.00188215 Jy
! Component: 2000  -  total flux cleaned = -0.00212769 Jy
! Component: 2050  -  total flux cleaned = -0.00232905 Jy
! Component: 2100  -  total flux cleaned = -0.00232853 Jy
! Component: 2150  -  total flux cleaned = -0.00260379 Jy
! Component: 2200  -  total flux cleaned = -0.00275831 Jy
! Component: 2250  -  total flux cleaned = -0.00291073 Jy
! Component: 2300  -  total flux cleaned = -0.00306101 Jy
! Component: 2350  -  total flux cleaned = -0.00309781 Jy
! Component: 2400  -  total flux cleaned = -0.00331665 Jy
! Component: 2450  -  total flux cleaned = -0.00320858 Jy
! Component: 2500  -  total flux cleaned = -0.00335072 Jy
! Component: 2550  -  total flux cleaned = -0.00356106 Jy
! Component: 2600  -  total flux cleaned = -0.00369995 Jy
! Component: 2650  -  total flux cleaned = -0.00390574 Jy
! Component: 2700  -  total flux cleaned = -0.00393942 Jy
! Component: 2750  -  total flux cleaned = -0.00383892 Jy
! Component: 2800  -  total flux cleaned = -0.00397177 Jy
! Component: 2850  -  total flux cleaned = -0.00410202 Jy
! Component: 2900  -  total flux cleaned = -0.00410143 Jy
! Component: 2950  -  total flux cleaned = -0.00406964 Jy
! Component: 3000  -  total flux cleaned = -0.0041011 Jy
! Component: 3050  -  total flux cleaned = -0.00407063 Jy
! Component: 3100  -  total flux cleaned = -0.00416267 Jy
! Component: 3150  -  total flux cleaned = -0.00422313 Jy
! Component: 3200  -  total flux cleaned = -0.00422302 Jy
! Component: 3250  -  total flux cleaned = -0.00410471 Jy
! Component: 3300  -  total flux cleaned = -0.00422256 Jy
! Component: 3350  -  total flux cleaned = -0.00410618 Jy
! Component: 3400  -  total flux cleaned = -0.0040775 Jy
! Component: 3450  -  total flux cleaned = -0.00416238 Jy
! Component: 3500  -  total flux cleaned = -0.00410634 Jy
! Component: 3550  -  total flux cleaned = -0.00402349 Jy
! Component: 3600  -  total flux cleaned = -0.00402354 Jy
! Component: 3650  -  total flux cleaned = -0.00405005 Jy
! Component: 3700  -  total flux cleaned = -0.00391521 Jy
! Component: 3750  -  total flux cleaned = -0.00386219 Jy
! Component: 3800  -  total flux cleaned = -0.00383596 Jy
! Component: 3850  -  total flux cleaned = -0.00394011 Jy
! Component: 3900  -  total flux cleaned = -0.00396569 Jy
! Component: 3950  -  total flux cleaned = -0.00386362 Jy
! Component: 4000  -  total flux cleaned = -0.00391475 Jy
! Component: 4050  -  total flux cleaned = -0.00386496 Jy
! Total flux subtracted in 4096 components = -0.00401369 Jy
! Clean residual min=-0.001462 max=0.001512 Jy/beam
! Clean residual mean=-0.000000 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 1.74827 Jy
keep
! Adding 357 model components to the UV plane model.
! The established model now contains 592 components and 1.74827 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1829+4844_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.954 x 1.357 at 1.113 degrees (North through East)
! Clean map  min=-0.0032783  max=1.1161 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1829+4844_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.11607 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000466555 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.12541 0.12541 0.25082 0.501641 1.00328 2.00656 4.01313 8.02626 16.0525 32.105 64.21
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.116 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2392.15 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1829+4844_X_uvs.log closed on Thu Apr  7 02:01:35 2016