! Started logfile: /scr/pima/bg219b_uvs/J1746+2603_X_dfm.log on Thu May 19 20:29:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1746+2603_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1746+2603_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.880217 visibilities/baseline/integration-bin.
! Found source: J1746+2603
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19488 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1746+2603_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005561Jy  sigma=25.235946
! Fit after  self-cal, rms=0.926990Jy  sigma=23.226503
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7502 mas, bmaj=1.434 mas, bpa=-1.567 degrees
! Estimated noise=0.455562 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.055691 Jy
! Component: 100  -  total flux cleaned = 0.0700416 Jy
! Total flux subtracted in 100 components = 0.0700416 Jy
! Clean residual min=-0.003608 max=0.006076 Jy/beam
! Clean residual mean=-0.000000 rms=0.000929 Jy/beam
! Combined flux in latest and established models = 0.0700416 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0700416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059307Jy  sigma=1.403632
! Fit after  self-cal, rms=0.058880Jy  sigma=1.393339
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.007057 Jy
! Component: 100  -  total flux cleaned = 0.0109645 Jy
! Total flux subtracted in 100 components = 0.0109645 Jy
! Clean residual min=-0.002979 max=0.004460 Jy/beam
! Clean residual mean=-0.000000 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.0810061 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.0810061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057839Jy  sigma=1.364864
! Fit after  self-cal, rms=0.057844Jy  sigma=1.364595
! Inverting map 
! Added new window around map position (1.2, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00434242 Jy
! Component: 100  -  total flux cleaned = 0.00653399 Jy
! Total flux subtracted in 100 components = 0.00653399 Jy
! Clean residual min=-0.002777 max=0.002729 Jy/beam
! Clean residual mean=0.000000 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.0875401 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.0875401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057551Jy  sigma=1.356334
! Fit after  self-cal, rms=0.057497Jy  sigma=1.354899
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.754 mas, bpa=-0.8869 degrees
! Estimated noise=0.209868 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197088 Jy
! Component: 100  -  total flux cleaned = 0.00295133 Jy
! Component: 150  -  total flux cleaned = 0.00353944 Jy
! Component: 200  -  total flux cleaned = 0.0037991 Jy
! Total flux subtracted in 200 components = 0.0037991 Jy
! Clean residual min=-0.001811 max=0.001938 Jy/beam
! Clean residual mean=0.000003 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.0913392 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 39 components and 0.0913392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057430Jy  sigma=1.353193
! Fit after  self-cal, rms=0.057428Jy  sigma=1.352987
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.002 x 1.754 at -0.8869 degrees (North through East)
! Clean map  min=-0.0017729  max=0.073588 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.02     KP        0.96     
!   LA        0.98     MK        0.97     NL        1.00     OV        1.02     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.10     KP        0.97     
!   LA        0.99     MK        1.09     NL        1.04     OV        1.03     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.08     HN        1.05     KP        1.07     
!   LA        0.98     MK        1.02     NL        1.07     OV        1.09     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.02     KP        0.98     
!   LA        0.95     MK        0.96     NL        0.99     OV        1.02     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.01     KP        1.01     
!   LA        0.93     MK        0.99     NL        0.97     OV        1.00     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.99     KP        1.00     
!   LA        1.00     MK        1.00     NL        1.04     OV        1.01     
!   PT        1.05     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     HN        0.95     KP        1.04     
!   LA        1.08     MK        1.03     NL        0.99     OV        1.03     
!   PT        1.08     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.99     KP        0.96     
!   LA        1.00     MK        1.06     NL        0.98     OV        0.97     
!   PT        1.05     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.97     KP        1.01     
!   LA        1.03     MK        0.96     NL        1.02     OV        1.01     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.94     HN        0.99     KP        0.95     
!   LA        1.01     MK        1.04     NL        1.02     OV        0.96     
!   PT        0.91     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.01     KP        0.93     
!   LA        0.99     MK        0.94     NL        1.01     OV        1.03     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        0.87     KP        0.96     
!   LA        0.96     MK        0.94     NL        0.94     OV        0.98     
!   PT        0.93     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.057428Jy  sigma=1.352987
! Fit after  self-cal, rms=0.056590Jy  sigma=1.346891
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.005 mas, bmaj=1.76 mas, bpa=-1.146 degrees
! Estimated noise=0.209698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000114364 Jy
! Component: 100  -  total flux cleaned = -0.000227048 Jy
! Component: 150  -  total flux cleaned = -0.000250519 Jy
! Component: 200  -  total flux cleaned = -0.000282583 Jy
! Total flux subtracted in 200 components = -0.000282583 Jy
! Clean residual min=-0.001734 max=0.001754 Jy/beam
! Clean residual mean=0.000003 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.0910567 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 47 components and 0.0910567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056583Jy  sigma=1.346734
! Fit after  self-cal, rms=0.056587Jy  sigma=1.346615
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056587Jy  sigma=1.346615
! Fit after  self-cal, rms=0.056609Jy  sigma=1.343287
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=1.758 mas, bpa=-0.9723 degrees
! Estimated noise=0.209442 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000153006 Jy
! Component: 100  -  total flux cleaned = -0.000242616 Jy
! Component: 150  -  total flux cleaned = -0.000273074 Jy
! Component: 200  -  total flux cleaned = -0.0002941 Jy
! Total flux subtracted in 200 components = -0.0002941 Jy
! Clean residual min=-0.001675 max=0.001653 Jy/beam
! Clean residual mean=0.000003 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.0907626 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 52 components and 0.0907625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056606Jy  sigma=1.343224
! Fit after  self-cal, rms=0.056618Jy  sigma=1.343099
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.99773e-05 Jy
! Component: 100  -  total flux cleaned = -2.22947e-05 Jy
! Component: 150  -  total flux cleaned = -3.49046e-05 Jy
! Component: 200  -  total flux cleaned = -3.49146e-05 Jy
! Total flux subtracted in 200 components = -3.49146e-05 Jy
! Clean residual min=-0.001679 max=0.001634 Jy/beam
! Clean residual mean=0.000003 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.0907276 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 0.0907276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056616Jy  sigma=1.343064
! Fit after  self-cal, rms=0.056615Jy  sigma=1.343051
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056615Jy  sigma=1.343051
! Fit after  self-cal, rms=0.056618Jy  sigma=1.343038
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=1.76 mas, bpa=-1.002 degrees
! Estimated noise=0.209298 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000160536 Jy
! Component: 100  -  total flux cleaned = -0.000206549 Jy
! Component: 150  -  total flux cleaned = -0.000218155 Jy
! Component: 200  -  total flux cleaned = -0.000223313 Jy
! Total flux subtracted in 200 components = -0.000223313 Jy
! Clean residual min=-0.001680 max=0.001618 Jy/beam
! Clean residual mean=0.000003 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.0905043 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 55 components and 0.0905043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056616Jy  sigma=1.343001
! Fit after  self-cal, rms=0.056617Jy  sigma=1.342997
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.68175e-05 Jy
! Component: 100  -  total flux cleaned = -2.11913e-05 Jy
! Component: 150  -  total flux cleaned = -2.11091e-05 Jy
! Component: 200  -  total flux cleaned = -1.60902e-05 Jy
! Total flux subtracted in 200 components = -1.60902e-05 Jy
! Clean residual min=-0.001682 max=0.001614 Jy/beam
! Clean residual mean=0.000003 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.0904882 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.0904882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056615Jy  sigma=1.342968
! Fit after  self-cal, rms=0.056615Jy  sigma=1.342967
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056615Jy  sigma=1.342967
! Fit after  self-cal, rms=0.056602Jy  sigma=1.342958
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=2.747 mas, bpa=-0.2822 degrees
! Estimated noise=0.254518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000327255 Jy
! Component: 100  -  total flux cleaned = 0.000247034 Jy
! Component: 150  -  total flux cleaned = 0.00015821 Jy
! Component: 200  -  total flux cleaned = 0.000106657 Jy
! Total flux subtracted in 200 components = 0.000106657 Jy
! Clean residual min=-0.002404 max=0.002085 Jy/beam
! Clean residual mean=0.000007 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.0905949 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 58 components and 0.0905949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056609Jy  sigma=1.343071
! Fit after  self-cal, rms=0.056606Jy  sigma=1.343030
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.15918e-05 Jy
! Component: 100  -  total flux cleaned = 7.70827e-06 Jy
! Component: 150  -  total flux cleaned = -1.51192e-05 Jy
! Component: 200  -  total flux cleaned = -3.53033e-05 Jy
! Total flux subtracted in 200 components = -3.53033e-05 Jy
! Clean residual min=-0.002395 max=0.002061 Jy/beam
! Clean residual mean=0.000007 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.0905596 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 60 components and 0.0905596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056611Jy  sigma=1.343154
! Fit after  self-cal, rms=0.056610Jy  sigma=1.343140
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=1.762 mas, bpa=-1.043 degrees
! Estimated noise=0.209161 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.008 x 1.762 at -1.043 degrees (North through East)
! Clean map  min=-0.0015672  max=0.073417 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7528 mas, bmaj=1.437 mas, bpa=-1.443 degrees
! Estimated noise=0.453463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0554588 Jy
! Component: 100  -  total flux cleaned = 0.0700319 Jy
! Component: 150  -  total flux cleaned = 0.0774323 Jy
! Component: 200  -  total flux cleaned = 0.0822404 Jy
! Total flux subtracted in 200 components = 0.0822404 Jy
! Clean residual min=-0.002717 max=0.002769 Jy/beam
! Clean residual mean=0.000001 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.0822404 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0822404 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=1.762 mas, bpa=-1.043 degrees
! Estimated noise=0.209161 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00389487 Jy
! Component: 100  -  total flux cleaned = 0.00589029 Jy
! Component: 150  -  total flux cleaned = 0.00704196 Jy
! Component: 200  -  total flux cleaned = 0.0077312 Jy
! Total flux subtracted in 200 components = 0.0077312 Jy
! Clean residual min=-0.001731 max=0.001727 Jy/beam
! Clean residual mean=0.000003 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0899716 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 32 components and 0.0899716 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=2.747 mas, bpa=-0.2822 degrees
! Estimated noise=0.254518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000797344 Jy
! Component: 100  -  total flux cleaned = 0.000737836 Jy
! Component: 150  -  total flux cleaned = 0.000707895 Jy
! Component: 200  -  total flux cleaned = 0.000695649 Jy
! Total flux subtracted in 200 components = 0.000695649 Jy
! Clean residual min=-0.002428 max=0.002064 Jy/beam
! Clean residual mean=0.000007 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.0906673 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.11845e-05 Jy
! Component: 100  -  total flux cleaned = -3.06743e-05 Jy
! Component: 150  -  total flux cleaned = -3.94891e-05 Jy
! Component: 200  -  total flux cleaned = -5.5617e-05 Jy
! Total flux subtracted in 200 components = -5.5617e-05 Jy
! Clean residual min=-0.002413 max=0.002057 Jy/beam
! Clean residual mean=0.000007 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.0906117 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 0.0906117 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=1.762 mas, bpa=-1.043 degrees
! Estimated noise=0.209161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000447454 Jy
! Component: 100  -  total flux cleaned = -0.000479461 Jy
! Component: 150  -  total flux cleaned = -0.000479527 Jy
! Component: 200  -  total flux cleaned = -0.000433458 Jy
! Total flux subtracted in 200 components = -0.000433458 Jy
! Clean residual min=-0.001688 max=0.001601 Jy/beam
! Clean residual mean=0.000003 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.0901782 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 51 components and 0.0901782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056604Jy  sigma=1.343060
! Fit after  self-cal, rms=0.056605Jy  sigma=1.343011
wmodel /J1746+2603_X_map.mod
! wmodel: Unable to open new model file: /J1746+2603_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1746+2603_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.008 x 1.762 at -1.043 degrees (North through East)
! Clean map  min=-0.0016213  max=0.073305 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1746+2603_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0733052 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000368859 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.50955 1.50955 3.0191 6.03819 12.0764 24.1528 48.3055 96.611
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.073 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  198.735 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1746+2603_X_dfm.log closed on Thu May 19 20:29:42 2016